summaryrefslogtreecommitdiff
path: root/drivers/usb/core/hub.c
AgeCommit message (Expand)Author
2020-05-19Merge tag 'v4.9.220' into 4.9-2.3.x-imxMarcel Ziswiler
2020-03-11usb: core: hub: do error out if usb_autopm_get_interface() failsEugeniu Rosca
2020-02-28USB: hub: Don't record a connect-change event during reset-resumeAlan Stern
2020-01-23usb: core: hub: Improved device recognition on remote wakeupKeiya Nobuta
2019-12-21usb: Allow USB device to be warm reset in suspended stateKai-Heng Feng
2019-11-06usb: handle warm-reset port requests on hub resumeJan-Marek Glogowski
2019-08-04usb: core: hub: Disable hub-initiated U1/U2Thinh Nguyen
2019-08-04usb: Handle USB3 remote wakeup for LPM enabled devices correctlyLee, Chiasheng
2019-05-31USB: core: Don't unbind interfaces following device reset failureAlan Stern
2019-05-02USB: Consolidate LPM checks to avoid enabling LPM twiceKai-Heng Feng
2019-05-02USB: Add new USB LPM helpersKai-Heng Feng
2019-03-28Merge tag 'v4.9.166' into 4.9-2.3.x-imxMarcel Ziswiler
2019-02-12usb: hub: delay hub autosuspend if USB3 port is still link trainingMathias Nyman
2018-12-13USB: check usb_get_extra_descriptor for proper sizeMathias Payer
2018-12-12Merge tag 'v4.9.144' into 4.9-2.3.x-imxMarcel Ziswiler
2018-12-01usb: core: Fix hub port connection events lostDennis Wassenberg
2018-08-24usb: core: hub: controller driver name may be NULLPeter Chen
2018-08-23MLK-9617-13 usb: core: otg: do quick bus reset after clear connection changeLi Jun
2018-08-23MLK-9617-9 usb: core: hub: use a_set_b_hnp_en and b_hnp_en for otg fsm modeLi Jun
2018-08-23MLK-9617-6 usb: core: otg: do not break otg device enumerationLi Jun
2018-08-23MLK-9829 usb: core: print suggested message if failed to get device descriptorLi Jun
2018-08-03usb: hub: Don't wait for connect state at resume for powered-off portsDominik Bozek
2018-07-28usb: core: handle hub C_PORT_OVER_CURRENT conditionBin Liu
2018-07-03usb: do not reset if a low-speed or full-speed device timed outMaxim Moseychuk
2018-05-01USB: Increment wakeup count on remote wakeup.Ravi Chandra Sadineni
2017-12-09usb: hub: Cycle HUB power when initialization failsMike Looijmans
2017-10-27usb: hub: Allow reset retry for USB2 devices on connect bounceMathias Nyman
2017-10-12usb: Increase quirk delay for USB devicesDmitry Fleytman
2017-08-16USB: Check for dropped connection before switching to full speedAlan Stern
2017-06-24USB: hub: fix SS max number of portsJohan Hovold
2017-05-25USB: hub: fix non-SS hub-descriptor handlingJohan Hovold
2017-05-25USB: hub: fix SS hub-descriptor handlingJohan Hovold
2017-05-20usb: hub: Do not attempt to autosuspend disconnected devicesGuenter Roeck
2017-05-20usb: hub: Fix error loop seen after hub communication errorsGuenter Roeck
2017-04-18usb: hub: Wait for connection to be reestablished after port resetGuenter Roeck
2017-03-30usb: hub: Fix crash after failure to read BOS descriptorGuenter Roeck
2017-01-12usb: hub: Move hub_port_disable() to fix warning if PM is disabledGeert Uytterhoeven
2017-01-06usb: hub: Fix auto-remount of safely removed or ejected USB-3 devicesMathias Nyman
2016-09-27usb: hub: change CLEAR_FEATURE to SET_FEATUREYonglong Wu
2016-08-30usb: core: hub: don't print on ENOMEMWolfram Sang
2016-08-09USB: hub: change the locking in hub_activateAlan Stern
2016-08-09USB: hub: fix up early-exit pathway in hub_activateAlan Stern
2016-08-09usb: hub: Fix unbalanced reference count/memory leak/deadlocksViresh Kumar
2016-04-28usb: core: hub: hub_port_init lock controller instead of busChris Bainbridge
2016-04-26hub: admit devices are SS+Oliver Neukum
2016-03-03usb: hub: fix a typo in hub_port_init() leading to wrong logicOliver Neukum
2016-03-01Merge 4.5-rc6 into usb-nextGreg Kroah-Hartman
2016-02-20Revert "usb: hub: do not clear BOS field during reset device"Greg Kroah-Hartman
2016-02-14usb: retry reset if a device times outOliver Neukum
2016-02-09drivers: usb: removed assignment of 0 to static variablesSaurabh Sengar
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-03 10:49:57 +0000