summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2011-04-29ENGR00142745 MX50 RD3: Fix missing pmic config in imx5_update_defconfigrel_imx_2.6.35_11.04.01Robby Cai
2011-04-27ENGR00142581-1 MX50 RD3: Make SEIKO WVGA panel work on J12Robby Cai
2011-04-21ENGR00142411-1 [MX50]RD3 change switch modeAnson Huang
2011-04-20ENGR00142097 MX50 RD3: Fix: Enable HDMI will cause reboot failureRobby Cai
2011-04-18ENGR00142264 MX50 RD3: Make battery driver built as moduleRobby Cai
2011-04-18ENGR00142258 isolate EIM signals and boot configuration signalsRobby Cai
2011-04-16ENGR00142018 MX50: Add PD+3 routine for all DDR typesRobby Cai
2011-04-14ENGR00142123-2 MX50: Add CLAA WVGA driver support on RD3Robby Cai
2011-04-12ENGR00142006: MX50- Fix audio noise issue.Ranjani Vaidyanathan
2011-04-07ENGR00140983-3 - MSL: Support SII902X HDMI on MX50 RD3Danny Nold
2011-04-07ENGR00140983-1 - MX50 IOMUX: Add defines to use LCDIF through EPDC padsDanny Nold
2011-04-07ENGR00140737-2 - ARM: imx50: Fix APLL relocking and remove APLL auto-disableDanny Nold
2011-04-07ENGR00140737-1 - ARM: plat-mxc: Disable child clocks before parent clocksDanny Nold
2011-04-06ENGR00141672 MX50 RD3: Add board-specific configuration for M25P32Robby Cai
2011-04-06ENGR00141508-2 MX50 RD3: Add board-specific file for PMIC RipleyRobby Cai
2011-04-02ENGR00140872 MX50: Add RD3 supportRobby Cai
2011-04-02ENGR00141425-2 MX50 RDP: Adjust MC13892 driver on new frameworkRobby Cai
2011-03-31ENGR00141363 ARM imx53 clock: change di0 clock default parent to pll3Jason Chen
2011-03-30ENGR00141343 Mx53: reduce vdd_reg power on suspendZhou Jingyu
2011-03-29ENGR00141310 mx5x clock: add emi_fast_clk as tz1's parent for uart dmaXinyu Chen
2011-03-29ENGR00141306 MX53 SMD: add Seiko WVGA LCD panel supportLily Zhang
2011-03-28ENGR00141184: MX53 SMD: spi nor: the expected SPI-NOR partitions are not createdTerry Lv
2011-03-28ENGR00141152-2 imx5X MSL: make default display optionJason Chen
2011-03-25ENGR00141155-1 ARM mx53_smd: add related regulator for hdmiJason Chen
2011-03-24ENGR00141109: MX53-SMD: SPI-NOR: Add mxc_m25p80 to imx5_defconfigTerry Lv
2011-03-23ENGR00140763 MX53: By default only enable da9053 irq as wakeup sourceZhou Jingyu
2011-03-22ENGR00140979: MX53: Update VDDGP voltagesRanjani Vaidyanathan
2011-03-22ENGR00140875: MX51: Added 400MHz working pointRanjani Vaidyanathan
2011-03-22ENGR00140971 Add support for LVDS & touchscreen on MX53 ARD RevB brdDinh Nguyen
2011-03-22ENGR00140893-3 Re-generate imx5_defconfig due to MXC_VPU_IRAM config removedSammy He
2011-03-22ENGR00140893-2 vpu: Add iram info to vpu platform data for each platformSammy He
2011-03-22ENGR00140933 MX51 IOMUX fix headphone detect pin iomux.Zhang Jiejing
2011-03-20ENGR00140274: SPI_NOR: Add m25p32 spi flash supportTerry Lv
2011-03-17ENGR00140710-1 usb-device: add more device wakeup modesPeter Chen
2011-03-17ENGR00140668 MX53: increase dram_sdclkx driver strengthZhou Jingyu
2011-03-16ENGR00140699-2 [mx28 spi] add a parameter to select spi master/slave modeTony Lin
2011-03-16ENGR00140644 mx51 enchance the sd/mmc HW timing compatibility on BBGRichard Zhu
2011-03-15ENGR00140550-4 [imx28/AR6003]enable staging/ar6003 driver in default configTony Lin
2011-03-15ENGR00140550-3 [imx5/AR6003]enable staging/ar6003 driver in default configTony Lin
2011-03-10ENGR00139626 MX53: fix can not set to 160M when current CPU works at 1000MZhou Jingyu
2011-03-10ENGR00140265 mx53 smd: add support for hardware pin controlled suspendZhou Jingyu
2011-03-08ENGR00140390 MX53_SMD: IOMUX: Fix UART3 iomux or Atheros BT will hang.Zhang Jiejing
2011-03-01ENGR00139672-2 Make use of the new mx5x_revision callDinh Nguyen
2011-03-01ENGR00139672-1 mx5: Get the silicon revision from the IIMDinh Nguyen
2011-03-01ENGR00139531: MX5x-All bus-masters must have DDR clock as a dependent clock.Ranjani Vaidyanathan
2011-03-01ENGR00139866 Config: add USB ACM Modem config for MX53_SMDZhang Jiejing
2011-02-25ENGR00139383-3 MX5 defconfig:Support ISL29023 light sensorLiu Ying
2011-02-25ENGR00139383-2 MX53 SMD:Support ISL29023 light sensorLiu Ying
2011-02-23ENGR00139643-1 MSL: can not read edid at probe for first power onJason Chen
2011-02-22ENGR00139503 MX53: Add IEEE 1588 support for mx53 LOCO and SMD boardsZeng Zhaoming
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-25 00:52:51 +0000