summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2016-03-09imx7d-colibri.dts: fix double declared UART1 DSR/RI pinmuxingColibri_iMX7_LinuxImageV2.6Alpha1_20160315Max Krummenacher
2016-03-09imx7d-colibri.dts: add PMIC / TOUCH interrupt gpioMax Krummenacher
2016-03-09imx7d-colibri.dts: implement mmc card detectMax Krummenacher
2016-03-09rn5txxx-regulator.c: allow GPIO 0 to be used for an enable signalMax Krummenacher
2016-03-09colibri_imx7_defconfig: fix NAND / Thermal Sensor / USBMax Krummenacher
2016-03-09CONFIG_FB_MXS: allow build without configuring IPU alsoMax Krummenacher
2016-03-09drivers/mtd/nand/Kconfig: allow MTD_NAND_GPMI_NAND for i.MX 7Max Krummenacher
2016-03-09drivers/dma/Kconfig: allow MXS_DMA for i.MX 7Max Krummenacher
2016-03-09arm/mach-imx: add i.MX7 features to SOC_IMX7Max Krummenacher
2016-03-09colibri_imx7_defconfig: cleanup and sync with Colibri iMX6Stefan Agner
2016-03-09ARM: imx: fix i.MX7D build without i.MX6Stefan Agner
2016-03-09ARM: dts: imx7d-colibri: use external Ethernet PHY clockMax Krummenacher
2016-03-09mach-imx7d.c: use enet_out clk to decide on PHY clockMax Krummenacher
2016-03-09sgtl5000.c: HACK, defer probe when I2C not yet runningMax Krummenacher
2016-03-09ARM: dts: imx7s-colibri: add working dts for soloMax Krummenacher
2016-03-09video: fbdev: mxsfb: fix pixelclock polarityStefan Agner
2016-03-09ARM: dts: imx7d-colibri: add AD7879 device tree nodeStefan Agner
2016-03-09input: touchscreen: ad7879: add device tree supportStefan Agner
2016-03-09input: touchscreen: ad7879: fix default x/y axis assignmentStefan Agner
2016-03-09ARM: dts: imx7d-colibri: add Cortex-M4 related nodesStefan Agner
2016-03-08chipidea: make usb charger optionalMax Krummenacher
2016-03-08ARM: imx: gpc: exit with error if IPG clock is missingMax Krummenacher
2016-03-08mmc: sdhci-esdhc-imx: Fixup runtime PM conditions during ->probe()Ulf Hansson
2016-03-08ARM: imx: enet1: output reference clockMax Krummenacher
2016-03-08colibri_imx7_defconfig: add initialMax Krummenacher
2016-03-08ARM: dts: imx7d-colibri: add initial device treeMax Krummenacher
2016-03-08arm: imx7d-pinfunc: add daisychain setting for UART2_DTE_RXMax Krummenacher
2016-03-08rn5t567: add PMIC driverMax Krummenacher
2016-03-08watchdog: add driver for Ricoh RN5T618 watchdogBeniamino Galvani
2016-03-08mfd: Add Ricoh RN5T618 PMIC core driverBeniamino Galvani
2016-03-08mfd: rn5t618: Document device tree bindingsBeniamino Galvani
2016-03-08regulator: rn5t618: add driver for Ricoh RN5T618 regulatorsBeniamino Galvani
2016-03-08Revert "arm: Export cache flush management symbols when !MULTI_CACHE"Max Krummenacher
2016-03-08imx6 device-tree: reduce SPI clock to datasheet maximumMax Krummenacher
2016-03-08of: fill in new type field on node creationMax Krummenacher
2016-03-08imx6dl-colibri-cam-eval-v3.dts: add fusion_F07 backlight extensionsMax Krummenacher
2016-03-08apalis/colibri_imx6: synchronize USB serial optionsStefan Agner
2016-03-08tty: serial: imx: disable DCD and RI interruptsStefan Agner
2016-03-08ARM: dts: imx: fix invalid #address-cells valueTim Harvey
2016-03-08PCI: Apalis GEN1 forcing quirkMarcel Ziswiler
2016-03-08ARM: dts: apalis_imx6: stream-line MMC/SD drive strengthMarcel Ziswiler
2016-03-08ARM: dts: apalis_imx6: add explicit okay status to adv7180 & max9526Marcel Ziswiler
2016-03-08ARM: dts: apalis_imx6: fix Ethernet PHY reset & interruptMarcel Ziswiler
2016-03-08ARM: dts: apalis_imx6: clarify module type and carrier board modelMarcel Ziswiler
2016-03-08PCI: imx6: fix PCIe EP device self-initialisationMarcel Ziswiler
2016-03-08ARM: dts: apalis_imx6: happy new yearMarcel Ziswiler
2015-12-26pm-imx6.c: fix power off by stop modeMax Krummenacher
2015-12-26process.c: if power off fails, do at least a haltMax Krummenacher
2015-12-26gpio: generic: clamp retured value to [0,1]Linus Walleij
2015-12-26apalis/colibri_imx6: Enable RTL8192CU driverBhuvanchandra DV