diff options
Diffstat (limited to 'drivers/usb/core')
-rw-r--r-- | drivers/usb/core/config.c | 38 | ||||
-rw-r--r-- | drivers/usb/core/devio.c | 16 | ||||
-rw-r--r-- | drivers/usb/core/hub.c | 101 | ||||
-rw-r--r-- | drivers/usb/core/quirks.c | 4 |
4 files changed, 78 insertions, 81 deletions
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 894894f2ff93..70af0804465c 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -178,14 +178,26 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, if (ifp->desc.bNumEndpoints >= num_ep) goto skip_to_next_endpoint_or_interface_descriptor; + /* Check for duplicate endpoint addresses */ + for (i = 0; i < ifp->desc.bNumEndpoints; ++i) { + if (ifp->endpoint[i].desc.bEndpointAddress == + d->bEndpointAddress) { + dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n", + cfgno, inum, asnum, d->bEndpointAddress); + goto skip_to_next_endpoint_or_interface_descriptor; + } + } + endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints]; ++ifp->desc.bNumEndpoints; memcpy(&endpoint->desc, d, n); INIT_LIST_HEAD(&endpoint->urb_list); - /* Fix up bInterval values outside the legal range. Use 32 ms if no - * proper value can be guessed. */ + /* + * Fix up bInterval values outside the legal range. + * Use 10 or 8 ms if no proper value can be guessed. + */ i = 0; /* i = min, j = max, n = default */ j = 255; if (usb_endpoint_xfer_int(d)) { @@ -193,13 +205,15 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, switch (to_usb_device(ddev)->speed) { case USB_SPEED_SUPER: case USB_SPEED_HIGH: - /* Many device manufacturers are using full-speed + /* + * Many device manufacturers are using full-speed * bInterval values in high-speed interrupt endpoint - * descriptors. Try to fix those and fall back to a - * 32 ms default value otherwise. */ + * descriptors. Try to fix those and fall back to an + * 8-ms default value otherwise. + */ n = fls(d->bInterval*8); if (n == 0) - n = 9; /* 32 ms = 2^(9-1) uframes */ + n = 7; /* 8 ms = 2^(7-1) uframes */ j = 16; /* @@ -214,10 +228,12 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, } break; default: /* USB_SPEED_FULL or _LOW */ - /* For low-speed, 10 ms is the official minimum. + /* + * For low-speed, 10 ms is the official minimum. * But some "overclocked" devices might want faster - * polling so we'll allow it. */ - n = 32; + * polling so we'll allow it. + */ + n = 10; break; } } else if (usb_endpoint_xfer_isoc(d)) { @@ -225,10 +241,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, j = 16; switch (to_usb_device(ddev)->speed) { case USB_SPEED_HIGH: - n = 9; /* 32 ms = 2^(9-1) uframes */ + n = 7; /* 8 ms = 2^(7-1) uframes */ break; default: /* USB_SPEED_FULL */ - n = 6; /* 32 ms = 2^(6-1) frames */ + n = 4; /* 8 ms = 2^(4-1) frames */ break; } } diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 986abde07683..3d46b0bae75c 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1526,11 +1526,17 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb as->urb->start_frame = uurb->start_frame; as->urb->number_of_packets = number_of_packets; as->urb->stream_id = stream_id; - if (uurb->type == USBDEVFS_URB_TYPE_ISO || - ps->dev->speed == USB_SPEED_HIGH) - as->urb->interval = 1 << min(15, ep->desc.bInterval - 1); - else - as->urb->interval = ep->desc.bInterval; + + if (ep->desc.bInterval) { + if (uurb->type == USBDEVFS_URB_TYPE_ISO || + ps->dev->speed == USB_SPEED_HIGH || + ps->dev->speed >= USB_SPEED_SUPER) + as->urb->interval = 1 << + min(15, ep->desc.bInterval - 1); + else + as->urb->interval = ep->desc.bInterval; + } + as->urb->context = as; as->urb->complete = async_completed; for (totlen = u = 0; u < number_of_packets; u++) { diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c98f78b0bf11..7602eceb5403 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -101,6 +101,8 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem); static void hub_release(struct kref *kref); static int usb_reset_and_verify_device(struct usb_device *udev); +static void hub_usb3_port_prepare_disable(struct usb_hub *hub, + struct usb_port *port_dev); static inline char *portspeed(struct usb_hub *hub, int portstatus) { @@ -882,82 +884,28 @@ static int hub_set_port_link_state(struct usb_hub *hub, int port1, } /* - * If USB 3.0 ports are placed into the Disabled state, they will no longer - * detect any device connects or disconnects. This is generally not what the - * USB core wants, since it expects a disabled port to produce a port status - * change event when a new device connects. - * - * Instead, set the link state to Disabled, wait for the link to settle into - * that state, clear any change bits, and then put the port into the RxDetect - * state. + * USB-3 does not have a similar link state as USB-2 that will avoid negotiating + * a connection with a plugged-in cable but will signal the host when the cable + * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices */ -static int hub_usb3_port_disable(struct usb_hub *hub, int port1) -{ - int ret; - int total_time; - u16 portchange, portstatus; - - if (!hub_is_superspeed(hub->hdev)) - return -EINVAL; - - ret = hub_port_status(hub, port1, &portstatus, &portchange); - if (ret < 0) - return ret; - - /* - * USB controller Advanced Micro Devices, Inc. [AMD] FCH USB XHCI - * Controller [1022:7814] will have spurious result making the following - * usb 3.0 device hotplugging route to the 2.0 root hub and recognized - * as high-speed device if we set the usb 3.0 port link state to - * Disabled. Since it's already in USB_SS_PORT_LS_RX_DETECT state, we - * check the state here to avoid the bug. - */ - if ((portstatus & USB_PORT_STAT_LINK_STATE) == - USB_SS_PORT_LS_RX_DETECT) { - dev_dbg(&hub->ports[port1 - 1]->dev, - "Not disabling port; link state is RxDetect\n"); - return ret; - } - - ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED); - if (ret) - return ret; - - /* Wait for the link to enter the disabled state. */ - for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) { - ret = hub_port_status(hub, port1, &portstatus, &portchange); - if (ret < 0) - return ret; - - if ((portstatus & USB_PORT_STAT_LINK_STATE) == - USB_SS_PORT_LS_SS_DISABLED) - break; - if (total_time >= HUB_DEBOUNCE_TIMEOUT) - break; - msleep(HUB_DEBOUNCE_STEP); - } - if (total_time >= HUB_DEBOUNCE_TIMEOUT) - dev_warn(&hub->ports[port1 - 1]->dev, - "Could not disable after %d ms\n", total_time); - - return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT); -} - static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) { struct usb_port *port_dev = hub->ports[port1 - 1]; struct usb_device *hdev = hub->hdev; int ret = 0; - if (port_dev->child && set_state) - usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED); if (!hub->error) { - if (hub_is_superspeed(hub->hdev)) - ret = hub_usb3_port_disable(hub, port1); - else + if (hub_is_superspeed(hub->hdev)) { + hub_usb3_port_prepare_disable(hub, port_dev); + ret = hub_set_port_link_state(hub, port_dev->portnum, + USB_SS_PORT_LS_U3); + } else { ret = usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE); + } } + if (port_dev->child && set_state) + usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED); if (ret && ret != -ENODEV) dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret); return ret; @@ -4036,6 +3984,26 @@ void usb_unlocked_enable_lpm(struct usb_device *udev) } EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm); +/* usb3 devices use U3 for disabled, make sure remote wakeup is disabled */ +static void hub_usb3_port_prepare_disable(struct usb_hub *hub, + struct usb_port *port_dev) +{ + struct usb_device *udev = port_dev->child; + int ret; + + if (udev && udev->port_is_suspended && udev->do_remote_wakeup) { + ret = hub_set_port_link_state(hub, port_dev->portnum, + USB_SS_PORT_LS_U0); + if (!ret) { + msleep(USB_RESUME_TIMEOUT); + ret = usb_disable_remote_wakeup(udev); + } + if (ret) + dev_warn(&udev->dev, + "Port disable: can't disable remote wake\n"); + udev->do_remote_wakeup = 0; + } +} #else /* CONFIG_PM */ @@ -4043,6 +4011,9 @@ EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm); #define hub_resume NULL #define hub_reset_resume NULL +static inline void hub_usb3_port_prepare_disable(struct usb_hub *hub, + struct usb_port *port_dev) { } + int usb_disable_lpm(struct usb_device *udev) { return 0; diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index d2e50a27140c..24f9f98968a5 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -37,6 +37,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* CBM - Flash disk */ { USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME }, + /* WORLDE easy key (easykey.25) MIDI controller */ + { USB_DEVICE(0x0218, 0x0401), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* HP 5300/5370C scanner */ { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 }, |