diff options
Diffstat (limited to 'arch/arm/plat-mxc/include/mach/arc_otg.h')
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/arc_otg.h | 373 |
1 files changed, 373 insertions, 0 deletions
diff --git a/arch/arm/plat-mxc/include/mach/arc_otg.h b/arch/arm/plat-mxc/include/mach/arc_otg.h new file mode 100644 index 000000000000..320fd7d11495 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/arc_otg.h @@ -0,0 +1,373 @@ +/* + * Copyright (C) 2005-2010 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_MXC_ARC_OTG_H__ +#define __ASM_ARCH_MXC_ARC_OTG_H__ + +#ifdef CONFIG_ARCH_MX3 +extern volatile u32 *mx3_usb_otg_addr; +#define OTG_BASE_ADDR mx3_usb_otg_addr +#endif +#define USB_OTGREGS_BASE (OTG_BASE_ADDR + 0x000) +#define USB_H1REGS_BASE (OTG_BASE_ADDR + 0x200) +#define USB_H2REGS_BASE (OTG_BASE_ADDR + 0x400) +#ifdef CONFIG_ARCH_MX5 +#define USB_H3REGS_BASE (OTG_BASE_ADDR + 0x600) +#define USB_OTHERREGS_BASE (OTG_BASE_ADDR + 0x800) +#else +#define USB_OTHERREGS_BASE (OTG_BASE_ADDR + 0x600) +#endif + + +#define USBOTG_REG32(offset) (*((volatile u32 *)(IO_ADDRESS(USB_OTGREGS_BASE + (offset))))) +#define USBOTG_REG16(offset) (*((volatile u16 *)(IO_ADDRESS(USB_OTGREGS_BASE + (offset))))) + +#define USBH1_REG32(offset) (*((volatile u32 *)(IO_ADDRESS(USB_H1REGS_BASE + (offset))))) +#define USBH1_REG16(offset) (*((volatile u16 *)(IO_ADDRESS(USB_H1REGS_BASE + (offset))))) + +#define USBH2_REG32(offset) (*((volatile u32 *)(IO_ADDRESS(USB_H2REGS_BASE + (offset))))) +#define USBH2_REG16(offset) (*((volatile u16 *)(IO_ADDRESS(USB_H2REGS_BASE + (offset))))) + +#define USBOTHER_REG(offset) (*((volatile u32 *)(IO_ADDRESS(USB_OTHERREGS_BASE + (offset))))) + +/* + * OTG registers + */ +#define UOG_ID USBOTG_REG32(0x00) /* Host ID */ +#define UOG_HWGENERAL USBOTG_REG32(0x04) /* Host General */ +#define UOG_HWHOST USBOTG_REG32(0x08) /* Host h/w params */ +#define UOG_HWTXBUF USBOTG_REG32(0x10) /* TX buffer h/w params */ +#define UOG_HWRXBUF USBOTG_REG32(0x14) /* RX buffer h/w params */ +#define UOG_CAPLENGTH USBOTG_REG16(0x100) /* Capability register length */ +#define UOG_HCIVERSION USBOTG_REG16(0x102) /* Host Interface version */ +#define UOG_HCSPARAMS USBOTG_REG32(0x104) /* Host control structural params */ +#define UOG_HCCPARAMS USBOTG_REG32(0x108) /* control capability params */ +#define UOG_DCIVERSION USBOTG_REG32(0x120) /* device interface version */ +/* start EHCI registers: */ +#define UOG_USBCMD USBOTG_REG32(0x140) /* USB command register */ +#define UOG_USBSTS USBOTG_REG32(0x144) /* USB status register */ +#define UOG_USBINTR USBOTG_REG32(0x148) /* interrupt enable register */ +#define UOG_FRINDEX USBOTG_REG32(0x14c) /* USB frame index */ +/* segment (0x150) addr bits 63:32 if needed */ +#define UOG_PERIODICLISTBASE USBOTG_REG32(0x154) /* host crtlr frame list base addr */ +#define UOG_DEVICEADDR USBOTG_REG32(0x154) /* device crtlr device address */ +#define UOG_ASYNCLISTADDR USBOTG_REG32(0x158) /* host ctrlr next async addr */ +#define UOG_EPLISTADDR USBOTG_REG32(0x158) /* device ctrlr endpoint list addr */ +#define UOG_BURSTSIZE USBOTG_REG32(0x160) /* host ctrlr embedded TT async buf status */ +#define UOG_TXFILLTUNING USBOTG_REG32(0x164) /* TX FIFO fill tuning */ +#define UOG_ULPIVIEW USBOTG_REG32(0x170) /* ULPI viewport */ +#define UOG_CFGFLAG USBOTG_REG32(0x180) /* configflag (supports HS) */ +#define UOG_PORTSC1 USBOTG_REG32(0x184) /* port status and control */ +/* end EHCI registers: */ +#define UOG_OTGSC USBOTG_REG32(0x1a4) /* OTG status and control */ +#define UOG_USBMODE USBOTG_REG32(0x1a8) /* USB device mode */ +#define UOG_ENDPTSETUPSTAT USBOTG_REG32(0x1ac) /* endpoint setup status */ +#define UOG_ENDPTPRIME USBOTG_REG32(0x1b0) /* endpoint initialization */ +#define UOG_ENDPTFLUSH USBOTG_REG32(0x1b4) /* endpoint de-initialize */ +#define UOG_ENDPTSTAT USBOTG_REG32(0x1b8) /* endpoint status */ +#define UOG_ENDPTCOMPLETE USBOTG_REG32(0x1bc) /* endpoint complete */ +#define UOG_EPCTRL0 USBOTG_REG32(0x1c0) /* endpoint control0 */ +#define UOG_EPCTRL1 USBOTG_REG32(0x1c4) /* endpoint control1 */ +#define UOG_EPCTRL2 USBOTG_REG32(0x1c8) /* endpoint control2 */ +#define UOG_EPCTRL3 USBOTG_REG32(0x1cc) /* endpoint control3 */ +#define UOG_EPCTRL4 USBOTG_REG32(0x1d0) /* endpoint control4 */ +#define UOG_EPCTRL5 USBOTG_REG32(0x1d4) /* endpoint control5 */ +#define UOG_EPCTRL6 USBOTG_REG32(0x1d8) /* endpoint control6 */ +#define UOG_EPCTRL7 USBOTG_REG32(0x1dc) /* endpoint control7 */ + +/* + * Host 1 registers + */ +#define UH1_ID USBH1_REG32(0x00) /* Host ID */ +#define UH1_HWGENERAL USBH1_REG32(0x04) /* Host General */ +#define UH1_HWHOST USBH1_REG32(0x08) /* Host h/w params */ +#define UH1_HWTXBUF USBH1_REG32(0x10) /* TX buffer h/w params */ +#define UH1_HWRXBUF USBH1_REG32(0x14) /* RX buffer h/w params */ +#define UH1_CAPLENGTH USBH1_REG16(0x100) /* Capability register length */ +#define UH1_HCIVERSION USBH1_REG16(0x102) /* Host Interface version */ +#define UH1_HCSPARAMS USBH1_REG32(0x104) /* Host control structural params */ +#define UH1_HCCPARAMS USBH1_REG32(0x108) /* control capability params */ +/* start EHCI registers: */ +#define UH1_USBCMD USBH1_REG32(0x140) /* USB command register */ +#define UH1_USBSTS USBH1_REG32(0x144) /* USB status register */ +#define UH1_USBINTR USBH1_REG32(0x148) /* interrupt enable register */ +#define UH1_FRINDEX USBH1_REG32(0x14c) /* USB frame index */ +/* segment (0x150) addr bits 63:32 if needed */ +#define UH1_PERIODICLISTBASE USBH1_REG32(0x154) /* host crtlr frame list base addr */ +#define UH1_ASYNCLISTADDR USBH1_REG32(0x158) /* host ctrlr nest async addr */ +#define UH1_BURSTSIZE USBH1_REG32(0x160) /* host ctrlr embedded TT async buf status */ +#define UH1_TXFILLTUNING USBH1_REG32(0x164) /* TX FIFO fill tuning */ +/* configured_flag (0x180) configflag (supports HS) */ +#define UH1_PORTSC1 USBH1_REG32(0x184) /* port status and control */ +/* end EHCI registers: */ +#define UH1_USBMODE USBH1_REG32(0x1a8) /* USB device mode */ + +/* + * Host 2 registers + */ +#define UH2_ID USBH2_REG32(0x00) /* Host ID */ +#define UH2_HWGENERAL USBH2_REG32(0x04) /* Host General */ +#define UH2_HWHOST USBH2_REG32(0x08) /* Host h/w params */ +#define UH2_HWTXBUF USBH2_REG32(0x10) /* TX buffer h/w params */ +#define UH2_HWRXBUF USBH2_REG32(0x14) /* RX buffer h/w params */ +#define UH2_CAPLENGTH USBH2_REG16(0x100) /* Capability register length */ +#define UH2_HCIVERSION USBH2_REG16(0x102) /* Host Interface version */ +#define UH2_HCSPARAMS USBH2_REG32(0x104) /* Host control structural params */ +#define UH2_HCCPARAMS USBH2_REG32(0x108) /* control capability params */ +/* start EHCI registers: */ +#define UH2_USBCMD USBH2_REG32(0x140) /* USB command register */ +#define UH2_USBSTS USBH2_REG32(0x144) /* USB status register */ +#define UH2_USBINTR USBH2_REG32(0x148) /* interrupt enable register */ +#define UH2_FRINDEX USBH2_REG32(0x14c) /* USB frame index */ +/* segment (0x150) addr bits 63:32 if needed */ +#define UH2_PERIODICLISTBASE USBH2_REG32(0x154) /* host crtlr frame list base addr */ +#define UH2_ASYNCLISTADDR USBH2_REG32(0x158) /* host ctrlr nest async addr */ +#define UH2_BURSTSIZE USBH2_REG32(0x160) /* host ctrlr embedded TT async buf status */ +#define UH2_TXFILLTUNING USBH2_REG32(0x164) /* TX FIFO fill tuning */ +#define UH2_ULPIVIEW USBH2_REG32(0x170) /* ULPI viewport */ +/* configured_flag (0x180) configflag (supports HS) */ +#define UH2_PORTSC1 USBH2_REG32(0x184) /* port status and control */ +/* end EHCI registers */ +#define UH2_USBMODE USBH2_REG32(0x1a8) /* USB device mode */ + +/* + * other regs (not part of ARC core) + */ +#define USBCTRL USBOTHER_REG(0x00) /* USB Control register */ +#define USB_OTG_MIRROR USBOTHER_REG(0x04) /* USB OTG mirror register */ +#define USB_PHY_CTR_FUNC USBOTHER_REG(0x08) /* OTG UTMI PHY Function Control register */ +#define USB_PHY_CTR_FUNC2 USBOTHER_REG(0x0c) /* OTG UTMI PHY Function Control register */ +#define USB_CTRL_1 USBOTHER_REG(0x10) /* USB Cotrol Register 1*/ +#define USBCTRL_HOST2 USBOTHER_REG(0x14) /* USB Cotrol Register 1*/ +#define USBCTRL_HOST3 USBOTHER_REG(0x18) /* USB Cotrol Register 1*/ +#define USBH1_PHY_CTRL0 USBOTHER_REG(0x1c) /* USB Cotrol Register 1*/ +#define USBH1_PHY_CTRL1 USBOTHER_REG(0x20) /* USB Cotrol Register 1*/ +#define USB_CLKONOFF_CTRL USBOTHER_REG(0x24) /* USB Clock on/off Control Register */ + +/* + * register bits + */ + +/* x_PORTSCx */ +#define PORTSC_PTS_MASK (3 << 30) /* parallel xcvr select mask */ +#define PORTSC_PTS_UTMI (0 << 30) /* UTMI/UTMI+ */ +#define PORTSC_PTS_PHILIPS (1 << 30) /* Philips classic */ +#define PORTSC_PTS_ULPI (2 << 30) /* ULPI */ +#define PORTSC_PTS_SERIAL (3 << 30) /* serial */ +#define PORTSC_STS (1 << 29) /* serial xcvr select */ +#define PORTSC_PTW (1 << 28) /* UTMI width */ +#define PORTSC_PHCD (1 << 23) /* Low Power Suspend */ +#define PORTSC_PORT_POWER (1 << 12) /* port power */ +#define PORTSC_LS_MASK (3 << 10) /* Line State mask */ +#define PORTSC_LS_SE0 (0 << 10) /* SE0 */ +#define PORTSC_LS_K_STATE (1 << 10) /* K-state */ +#define PORTSC_LS_J_STATE (2 << 10) /* J-state */ +#define PORTSC_PORT_RESET (1 << 8) /* Port reset */ +#define PORTSC_PORT_SUSPEND (1 << 7) /* Suspend */ +#define PORTSC_PORT_FORCE_RESUME (1 << 6) /* Force port resume */ +#define PORTSC_OVER_CURRENT_CHG (1 << 5) /* over current change */ +#define PORTSC_OVER_CURRENT_ACT (1 << 4) /* over currrent active */ +#define PORTSC_PORT_EN_DIS_CHANGE (1 << 3) /* port {en,dis}able change */ +#define PORTSC_PORT_ENABLE (1 << 2) /* port enabled */ +#define PORTSC_CONNECT_STATUS_CHANGE (1 << 1) /* connect status change */ +#define PORTSC_CURRENT_CONNECT_STATUS (1 << 0) /* current connect status */ + +#define PORTSC_W1C_BITS \ + (PORTSC_CONNECT_STATUS_CHANGE | \ + PORTSC_PORT_EN_DIS_CHANGE | \ + PORTSC_OVER_CURRENT_CHG) + +/* UOG_OTGSC Register Bits */ +/* control bits: */ +#define OTGSC_CTRL_VBUS_DISCHARGE (1 << 0) +#define OTGSC_CTRL_VBUS_CHARGE (1 << 1) +#define OTGSC_CTRL_OTG_TERM (1 << 3) /* controls DM pulldown */ +#define OTGSC_CTRL_DATA_PULSING (1 << 4) +#define OTGSC_CTRL_USB_ID_PU (1 << 5) /* enable ID pullup */ +/* current status: (R/O) */ +#define OTGSC_STS_USB_ID (1 << 8) /* 0=A-device 1=B-device */ +#define OTGSC_STS_A_VBUS_VALID (1 << 9) +#define OTGSC_STS_A_SESSION_VALID (1 << 10) +#define OTGSC_STS_B_SESSION_VALID (1 << 11) +#define OTGSC_STS_B_SESSION_END (1 << 12) +#define OTGSC_STS_1ms_TIMER (1 << 13) +#define OTGSC_STS_DATA_PULSE (1 << 14) +/* interrupt status: (write to clear) */ +#define OTGSC_IS_MASK (0x7f << 16) +#define OTGSC_IS_USB_ID (1 << 16) +#define OTGSC_IS_A_VBUS_VALID (1 << 17) +#define OTGSC_IS_A_SESSION_VALID (1 << 18) +#define OTGSC_IS_B_SESSION_VALID (1 << 19) +#define OTGSC_IS_B_SESSION_END (1 << 20) +#define OTGSC_IS_1ms_TIMER (1 << 21) +#define OTGSC_IS_DATA_PULSE (1 << 22) +/* interrupt enables: */ +#define OTGSC_IE_MASK (0x7f << 24) +#define OTGSC_IE_USB_ID (1 << 24) +#define OTGSC_IE_A_VBUS_VALID (1 << 25) +#define OTGSC_IE_A_SESSION_VALID (1 << 26) +#define OTGSC_IE_B_SESSION_VALID (1 << 27) +#define OTGSC_IE_B_SESSION_END (1 << 28) +#define OTGSC_IE_1ms_TIMER (1 << 29) +#define OTGSC_IE_DATA_PULSE (1 << 30) + +#if 1 /* FIXME these here for compatibility between my names and Leo's */ +/* OTG interrupt enable bit masks */ +#define OTGSC_INTERRUPT_ENABLE_BITS_MASK OTGSC_IE_MASK +#define OTGSC_INTSTS_MASK OTGSC_IS_MASK + +/* OTG interrupt status bit masks */ +#define OTGSC_INTERRUPT_STATUS_BITS_MASK OTGSC_IS_MASK +#endif + +/* x_USBMODE */ +#define USBMODE_SLOM (1 << 3) /* setup lockout mode */ +#define USBMODE_ES (1 << 2) /* (big) endian select */ +#define USBMODE_CM_MASK (3 << 0) /* controller mode mask */ +#define USBMODE_CM_HOST (3 << 0) /* host */ +#define USBMODE_CM_DEVICE (2 << 0) /* device */ +#define USBMODE_CM_reserved (1 << 0) /* reserved */ + +/* USBCTRL */ +#define UCTRL_OWIR (1 << 31) /* OTG wakeup intr request received */ +#define UCTRL_OSIC_MASK (3 << 29) /* OTG Serial Interface Config: */ +#define UCTRL_OSIC_DU6 (0 << 29) /* Differential/unidirectional 6 wire */ +#define UCTRL_OSIC_DB4 (1 << 29) /* Differential/bidirectional 4 wire */ +#define UCTRL_OSIC_SU6 (2 << 29) /* single-ended/unidirectional 6 wire */ +#define UCTRL_OSIC_SB3 (3 << 29) /* single-ended/bidirectional 3 wire */ + +#define UCTRL_OUIE (1 << 28) /* OTG ULPI intr enable */ +#define UCTRL_OWIE (1 << 27) /* OTG wakeup intr enable */ +#define UCTRL_OBPVAL_RXDP (1 << 26) /* OTG RxDp status in bypass mode */ +#define UCTRL_OBPVAL_RXDM (1 << 25) /* OTG RxDm status in bypass mode */ +#define UCTRL_OPM (1 << 24) /* OTG power mask */ +#define UCTRL_O_PWR_POL (1 << 24) /* OTG power pin polarity */ +#ifdef CONFIG_ARCH_MX5 +#define UCTRL_H2WIR (1 << 17) /* HOST2 wakeup intr request received */ +#else +#define UCTRL_H2WIR (1 << 23) /* HOST2 wakeup intr request received */ +#endif +#define UCTRL_H2SIC_MASK (3 << 21) /* HOST2 Serial Interface Config: */ +#define UCTRL_H2SIC_DU6 (0 << 21) /* Differential/unidirectional 6 wire */ +#define UCTRL_H2SIC_DB4 (1 << 21) /* Differential/bidirectional 4 wire */ +#define UCTRL_H2SIC_SU6 (2 << 21) /* single-ended/unidirectional 6 wire */ +#define UCTRL_H2SIC_SB3 (3 << 21) /* single-ended/bidirectional 3 wire */ + +#ifdef CONFIG_ARCH_MX5 +#define UCTRL_H2UIE (1 << 8) /* HOST2 ULPI intr enable */ +#define UCTRL_H2WIE (1 << 7) /* HOST2 wakeup intr enable */ +#define UCTRL_H2PP 0 /* Power Polarity for uh2 */ +#define UCTRL_H2PM (1 << 4) /* HOST2 power mask */ +#else +#define UCTRL_H2UIE (1 << 20) /* HOST2 ULPI intr enable */ +#define UCTRL_H2WIE (1 << 19) /* HOST2 wakeup intr enable */ +#define UCTRL_H2PP (1 << 18) /* Power Polarity for uh2 */ +#define UCTRL_H2PM (1 << 16) /* HOST2 power mask */ +#endif +#define UCTRL_H2OVBWK_EN (1 << 6) /* OTG VBUS Wakeup Enable */ +#define UCTRL_H2OIDWK_EN (1 << 5) /* OTG ID Wakeup Enable */ + +#define UCTRL_H1WIR (1 << 15) /* HOST1 wakeup intr request received */ +#define UCTRL_H1SIC_MASK (3 << 13) /* HOST1 Serial Interface Config: */ +#define UCTRL_H1SIC_DU6 (0 << 13) /* Differential/unidirectional 6 wire */ +#define UCTRL_H1SIC_DB4 (1 << 13) /* Differential/bidirectional 4 wire */ +#define UCTRL_H1SIC_SU6 (2 << 13) /* single-ended/unidirectional 6 wire */ +#define UCTRL_H1SIC_SB3 (3 << 13) /* single-ended/bidirectional 3 wire */ +#define UCTRL_OLOCKD (1 << 13) /* otg lock disable */ +#define UCTRL_H2LOCKD (1 << 12) /* HOST2 lock disable */ +#define UCTRL_H1UIE (1 << 12) /* Host1 ULPI interrupt enable */ + +#if defined(CONFIG_ARCH_MX37) +/* VBUS wakeup enable, UTMI only */ +#define UCTRL_VBUS_WKUP_EN (1 << 12) +#elif defined(CONFIG_ARCH_MX25) || defined(CONFIG_ARCH_MX35) +#define UCTRL_VBUS_WKUP_EN (1 << 15) +#endif + +#define UCTRL_PP (1 << 11) /* power polarity bit */ +#define UCTRL_H1WIE (1 << 11) /* HOST1 wakeup intr enable */ +#define UCTRL_H1BPVAL_RXDP (1 << 10) /* HOST1 RxDp status in bypass mode */ +#define UCTRL_XCSO (1 << 10) /* Xcvr Clock Select for OTG port */ +#define UCTRL_H1BPVAL_RXDM (1 << 9) /* HOST1 RxDm status in bypass mode */ +#define UCTRL_XCSH2 (1 << 9) /* Xcvr Clock Select for Host port */ +#define UCTRL_H1PM (1 << 8) /* HOST1 power mask */ +#define UCTRL_IP_PULIDP (1 << 8) /* Ipp_Puimpel_Pullup_Dp */ + +#define UCTRL_IP_PUE_UP (1 << 7) /* ipp_pue_pullup_dp */ +#define UCTRL_IP_PUE_DOWN (1 << 6) /* ipp_pue_pulldwn_dpdm */ +#define UCTRL_H2DT (1 << 5) /* HOST2 TLL disabled */ +#define UCTRL_H1DT (1 << 4) /* HOST1 TLL disabled */ +#define UCTRL_USBTE (1 << 4) /* USBT Transceiver enable */ +#define UCTRL_OCPOL (1 << 3) /* OverCurrent Polarity */ +#define UCTRL_OCE (1 << 2) /* OverCurrent Enable */ +#define UCTRL_H2OCPOL (1 << 2) /* OverCurrent Polarity of Host2 */ +#define UCTRL_H2OCS (1 << 1) /* Host OverCurrent State */ +#define UCTRL_BPE (1 << 0) /* bypass mode enable */ +#define UCTRL_OTD (1 << 0) /* OTG TLL Disable */ +#define UCTRL_OOCS (1 << 0) /* OTG OverCurrent State */ + +/* USBCMD */ +#define UCMD_RUN_STOP (1 << 0) /* controller run/stop */ +#define UCMD_RESET (1 << 1) /* controller reset */ +#define UCMD_ITC_NO_THRESHOLD (~(0xff << 16)) /* Interrupt Threshold Control */ + +/* OTG_MIRROR */ +#define OTGM_SESEND (1 << 4) /* B device session end */ +#define OTGM_VBUSVAL (1 << 3) /* Vbus valid */ +#define OTGM_BSESVLD (1 << 2) /* B session Valid */ +#define OTGM_ASESVLD (1 << 1) /* A session Valid */ +#define OTGM_IDIDG (1 << 0) /* OTG ID pin status */ + /* 1=high: Operate as B-device */ + /* 0=low : Operate as A-device */ + +/* USB_PHY_CTRL_FUNC */ +/* PHY control0 Register Bit Masks */ +#define USB_UTMI_PHYCTRL_CONF2 (1 << 26) + +#define USB_UTMI_PHYCTRL_UTMI_ENABLE (1 << 24) +#define USB_UTMI_PHYCTRL_CHGRDETEN (1 << 24) /* Enable Charger Detector */ +#define USB_UTMI_PHYCTRL_CHGRDETON (1 << 23) /* Charger Detector Power On Control */ +#define USB_UTMI_PHYCTRL_OC_POL (1 << 9) /* OTG Polarity of Overcurrent */ +#define USB_UTMI_PHYCTRL_OC_DIS (1 << 8) /* OTG Disable Overcurrent Event */ +#define USB_UH1_OC_DIS (1 << 5) /* UH1 Disable Overcurrent Event */ +#define USB_UH1_OC_POL (1 << 6) /* UH1 Polarity of OC,Low active */ +/* USB_PHY_CTRL_FUNC2*/ +#define USB_UTMI_PHYCTRL2_PLLDIV_MASK 0x3 +#define USB_UTMI_PHYCTRL2_PLLDIV_SHIFT 0 +#define USB_UTMI_PHYCTRL2_HSDEVSEL_MASK 0x3 +#define USB_UTMI_PHYCTRL2_HSDEVSEL_SHIFT 19 + +/* USB_CTRL_1 */ +#define USB_CTRL_UH1_EXT_CLK_EN (1 << 25) +#define USB_CTRL_UH2_EXT_CLK_EN (1 << 26) +#define USB_CTRL_UH2_CLK_FROM_ULPI_PHY (1 << 2) +/* ULPIVIEW register bits */ +#define ULPIVW_OFF (0x170) +#define ULPIVW_WU (1 << 31) /* Wakeup */ +#define ULPIVW_RUN (1 << 30) /* read/write run */ +#define ULPIVW_WRITE (1 << 29) /* 0=read 1=write */ +#define ULPIVW_SS (1 << 27) /* SyncState */ +#define ULPIVW_PORT_MASK 0x07 /* Port field */ +#define ULPIVW_PORT_SHIFT 24 +#define ULPIVW_ADDR_MASK 0xFF /* data address field */ +#define ULPIVW_ADDR_SHIFT 16 +#define ULPIVW_RDATA_MASK 0xFF /* read data field */ +#define ULPIVW_RDATA_SHIFT 8 +#define ULPIVW_WDATA_MASK 0xFF /* write data field */ +#define ULPIVW_WDATA_SHIFT 0 + +#define HCSPARAMS_PPC (0x1<<4) /* Port Power Control */ +/* USB Clock on/off Control Register */ +#define OTG_AHBCLK_OFF (0x1<<17) /* 1: OFF */ +#define H1_AHBCLK_OFF (0x1<<18) /* 1: OFF */ +extern enum fsl_usb2_modes get_usb_mode(struct fsl_usb2_platform_data *pdata); +#endif |