From 6e16d90b5218307db805e6b3e0b06d3946eb8c4c Mon Sep 17 00:00:00 2001 From: Colleen Twitty Date: Wed, 8 May 2013 11:45:59 -0700 Subject: cfg80211: Userspace may inform kernel of mesh auth method. Authentication takes place in userspace, but the beacon is generated in the kernel. Allow userspace to inform the kernel of the authentication method so the appropriate mesh config IE can be set prior to beacon generation when joining the MBSS. Signed-off-by: Colleen Twitty Signed-off-by: Johannes Berg --- net/wireless/mesh.c | 1 + 1 file changed, 1 insertion(+) (limited to 'net/wireless/mesh.c') diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index 0bb93f3061a4..9546ad210550 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -82,6 +82,7 @@ const struct mesh_setup default_mesh_setup = { .sync_method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET, .path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP, .path_metric = IEEE80211_PATH_METRIC_AIRTIME, + .auth_id = 0, /* open */ .ie = NULL, .ie_len = 0, .is_secure = false, -- cgit v1.2.3 From 5fe231e873729fa2f57cdc417d5c1f80871e2d7d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 8 May 2013 21:45:15 +0200 Subject: cfg80211: vastly simplify locking Virtually all code paths in cfg80211 already (need to) hold the RTNL. As such, there's little point in having another four mutexes for various parts of the code, they just cause lock ordering issues (and much of the time, the RTNL and a few of the others need thus be held.) Simplify all this by getting rid of the extra four mutexes and just use the RTNL throughout. Only a few code changes were needed to do this and we can get rid of a work struct for bonus points. Signed-off-by: Johannes Berg --- net/wireless/mesh.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'net/wireless/mesh.c') diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index 9546ad210550..5dfb289ab761 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -186,11 +186,9 @@ int cfg80211_join_mesh(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev = dev->ieee80211_ptr; int err; - mutex_lock(&rdev->devlist_mtx); wdev_lock(wdev); err = __cfg80211_join_mesh(rdev, dev, setup, conf); wdev_unlock(wdev); - mutex_unlock(&rdev->devlist_mtx); return err; } -- cgit v1.2.3 From 8e7c053853b7d299e8a2b8733659b0df8eee51f7 Mon Sep 17 00:00:00 2001 From: Colleen Twitty Date: Mon, 3 Jun 2013 09:53:39 -0700 Subject: {nl,cfg}80211: make peer link expiration time configurable If a STA has a peer that it hasn't seen any tx activity from for a certain length of time, the peer link is expired. This means the inactive STA is removed from the list of peers and that STA is not considered a peer again unless it re-peers. Previously, this inactivity time was always 30 minutes. Now, add it to the mesh configuration and allow it to be configured. Retain 30 minutes as a default value. Signed-off-by: Colleen Twitty Signed-off-by: Johannes Berg --- net/wireless/mesh.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'net/wireless/mesh.c') diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index 5dfb289ab761..0daaf72e1b81 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -18,6 +18,7 @@ #define MESH_PATH_TO_ROOT_TIMEOUT 6000 #define MESH_ROOT_INTERVAL 5000 #define MESH_ROOT_CONFIRMATION_INTERVAL 2000 +#define MESH_DEFAULT_PLINK_TIMEOUT 1800 /* timeout in seconds */ /* * Minimum interval between two consecutive PREQs originated by the same @@ -75,6 +76,7 @@ const struct mesh_config default_mesh_config = { .dot11MeshHWMPconfirmationInterval = MESH_ROOT_CONFIRMATION_INTERVAL, .power_mode = NL80211_MESH_POWER_ACTIVE, .dot11MeshAwakeWindowDuration = MESH_DEFAULT_AWAKE_WINDOW, + .plink_timeout = MESH_DEFAULT_PLINK_TIMEOUT, }; const struct mesh_setup default_mesh_setup = { -- cgit v1.2.3 From ffb3cf3000aa12facdccbdfcb10bfebda7199209 Mon Sep 17 00:00:00 2001 From: Ashok Nagarajan Date: Mon, 3 Jun 2013 10:33:36 -0700 Subject: {nl,mac,cfg}80211: Allow user to configure basic rates for mesh Currently mesh uses mandatory rates as the default basic rates. Allow basic rates to be configured during mesh join. Basic rates are applied only if channel is also provided with mesh join command. Signed-off-by: Ashok Nagarajan [some whitespace fixes, refuse basic rates w/o channel] Signed-off-by: Johannes Berg --- net/wireless/mesh.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'net/wireless/mesh.c') diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index 0daaf72e1b81..30c49202ee4d 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -162,6 +162,16 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, setup->chandef.center_freq1 = setup->chandef.chan->center_freq; } + /* + * check if basic rates are available otherwise use mandatory rates as + * basic rates + */ + if (!setup->basic_rates) { + struct ieee80211_supported_band *sband = + rdev->wiphy.bands[setup->chandef.chan->band]; + setup->basic_rates = ieee80211_mandatory_rates(sband); + } + if (!cfg80211_reg_can_beacon(&rdev->wiphy, &setup->chandef)) return -EINVAL; -- cgit v1.2.3