From 2103dec14792be2c2194a454630b01120d30e5cb Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Mon, 8 Jul 2013 16:55:53 +0200 Subject: mac80211: select and adjust bitrates according to channel mode The various components accessing the bitrates table must use consider the used channel bandwidth to select only available rates or calculate the bitrate correctly. There are some rates in reduced bandwidth modes which can't be represented as multiples of 500kbps, like 2.25 MBit/s in 5 MHz mode. The standard suggests to round up to the next multiple of 500kbps, just do that in mac80211 as well. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer [make rate unsigned in ieee80211_add_tx_radiotap_header(), squash fix] Signed-off-by: Johannes Berg --- net/mac80211/mesh.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'net/mac80211/mesh.c') diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 447f41bbe744..e536f22fbeca 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -62,7 +62,6 @@ bool mesh_matches_local(struct ieee80211_sub_if_data *sdata, struct ieee802_11_elems *ie) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; - struct ieee80211_local *local = sdata->local; u32 basic_rates = 0; struct cfg80211_chan_def sta_chan_def; @@ -85,7 +84,7 @@ bool mesh_matches_local(struct ieee80211_sub_if_data *sdata, (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth))) return false; - ieee80211_sta_get_rates(local, ie, ieee80211_get_sdata_band(sdata), + ieee80211_sta_get_rates(sdata, ie, ieee80211_get_sdata_band(sdata), &basic_rates); if (sdata->vif.bss_conf.basic_rates != basic_rates) -- cgit v1.2.3 From b60e527a729cbb9c88b49cc10738a13328cd1ed2 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Fri, 12 Jul 2013 18:55:22 +0800 Subject: mac80211: set forwarding in mesh capability info Set the Forwarding bit in Mesh Capability Info according to dot11MeshForwarding as defined in IEEE 802.11-2012 section 8.4.2.100.8. Signed-off-by: Chun-Yeow Yeoh Signed-off-by: Johannes Berg --- net/mac80211/mesh.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'net/mac80211/mesh.c') diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index e536f22fbeca..885a5f6e2c21 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -273,7 +273,9 @@ int mesh_add_meshconf_ie(struct ieee80211_sub_if_data *sdata, neighbors = min_t(int, neighbors, IEEE80211_MAX_MESH_PEERINGS); *pos++ = neighbors << 1; /* Mesh capability */ - *pos = IEEE80211_MESHCONF_CAPAB_FORWARDING; + *pos = 0x00; + *pos |= ifmsh->mshcfg.dot11MeshForwarding ? + IEEE80211_MESHCONF_CAPAB_FORWARDING : 0x00; *pos |= ifmsh->accepting_plinks ? IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00; /* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */ -- cgit v1.2.3 From a4ef66a915b957416a89a48365aea2ec2dc551f6 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Thu, 22 Aug 2013 10:28:58 -0700 Subject: mac80211: only respond to probe request with mesh ID Previously, the mesh STA responds to probe request from legacy STA but now it will only respond to legacy STA if the legacy STA does include the specific mesh ID or wildcard mesh ID in the probe request. The iw patch "iw: scan using meshid" can be used either by legacy STA or by mesh STA to do active scanning by inserting the mesh ID in the probe request frame. Signed-off-by: Chun-Yeow Yeoh Acked-by: Thomas Pedersen Acked-by: Javier Cardona Signed-off-by: Johannes Berg --- net/mac80211/mesh.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'net/mac80211/mesh.c') diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 885a5f6e2c21..707ac61d63e5 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -832,6 +832,9 @@ ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data *sdata, ieee802_11_parse_elems(pos, len - baselen, false, &elems); + if (!elems.mesh_id) + return; + /* 802.11-2012 10.1.4.3.2 */ if ((!ether_addr_equal(mgmt->da, sdata->vif.addr) && !is_broadcast_ether_addr(mgmt->da)) || -- cgit v1.2.3