From a97c13c34509be460dea23c86f31c02daa2428b5 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Tue, 23 Mar 2010 09:02:34 +0200 Subject: mac80211: Add support for connection quality monitoring Add support for the set_cqm_config op. This op function configures the requested connection quality monitor rssi threshold and rssi hysteresis values to the hardware if the hardware supports IEEE80211_HW_SUPPORTS_CQM. For unsupported hardware, currently -EOPNOTSUPP is returned, so the mac80211 is currently not doing connection quality monitoring on the host. This could be added later, if needed. Signed-off-by: Juuso Oikarinen Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'net/mac80211/cfg.c') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index b7116ef84a3b..c8f520529eec 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1402,6 +1402,32 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, return 0; } +static int ieee80211_set_cqm_rssi_config(struct wiphy *wiphy, + struct net_device *dev, + s32 rssi_thold, u32 rssi_hyst) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_vif *vif = &sdata->vif; + struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; + + if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_CQM_RSSI)) + return -EOPNOTSUPP; + + if (rssi_thold == bss_conf->cqm_rssi_thold && + rssi_hyst == bss_conf->cqm_rssi_hyst) + return 0; + + bss_conf->cqm_rssi_thold = rssi_thold; + bss_conf->cqm_rssi_hyst = rssi_hyst; + + /* tell the driver upon association, unless already associated */ + if (sdata->u.mgd.associated) + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_CQM); + + return 0; +} + static int ieee80211_set_bitrate_mask(struct wiphy *wiphy, struct net_device *dev, const u8 *addr, @@ -1506,4 +1532,5 @@ struct cfg80211_ops mac80211_config_ops = { .remain_on_channel = ieee80211_remain_on_channel, .cancel_remain_on_channel = ieee80211_cancel_remain_on_channel, .action = ieee80211_action, + .set_cqm_rssi_config = ieee80211_set_cqm_rssi_config, }; -- cgit v1.2.3 From 0af26b278bc1d747370b451595b7586cb7b3455c Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 29 Mar 2010 12:18:36 +0200 Subject: mac80211: enable QoS explicitly in AP mode Enable QoS explicitly, when user space AP program will setup a QoS queues. Currently this is not needed as iwlwifi not work in AP mode and no other driver implement enable/disable QoS. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'net/mac80211/cfg.c') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index c8f520529eec..a4ca425e4f3f 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1136,6 +1136,10 @@ static int ieee80211_set_txq_params(struct wiphy *wiphy, return -EINVAL; } + /* enable WMM or activate new settings */ + local->hw.conf.flags |= IEEE80211_CONF_QOS; + drv_config(local, IEEE80211_CONF_CHANGE_QOS); + return 0; } -- cgit v1.2.3 From 17e4ec147f4939ca8c81b41b4261ec7974531381 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 29 Mar 2010 23:28:30 -0700 Subject: mac80211: Track Beacon signal strength and implement cqm events Calculate a running average of the signal strength reported for Beacon frames and indicate cqm events if the average value moves below or above the configured threshold value (and filter out repetitive events with by using the configured hysteresis). Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'net/mac80211/cfg.c') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index a4ca425e4f3f..4edd73cbf052 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1415,9 +1415,6 @@ static int ieee80211_set_cqm_rssi_config(struct wiphy *wiphy, struct ieee80211_vif *vif = &sdata->vif; struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; - if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_CQM_RSSI)) - return -EOPNOTSUPP; - if (rssi_thold == bss_conf->cqm_rssi_thold && rssi_hyst == bss_conf->cqm_rssi_hyst) return 0; @@ -1425,6 +1422,12 @@ static int ieee80211_set_cqm_rssi_config(struct wiphy *wiphy, bss_conf->cqm_rssi_thold = rssi_thold; bss_conf->cqm_rssi_hyst = rssi_hyst; + if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_CQM_RSSI)) { + if (sdata->vif.type != NL80211_IFTYPE_STATION) + return -EOPNOTSUPP; + return 0; + } + /* tell the driver upon association, unless already associated */ if (sdata->u.mgd.associated) ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_CQM); -- cgit v1.2.3 From 1289723ef238908ca8d95ff48a46ee0de970f882 Mon Sep 17 00:00:00 2001 From: Holger Schurig Date: Mon, 19 Apr 2010 10:23:57 +0200 Subject: mac80211: sample survey implementation for mac80211 & hwsim This adds the survey function to both mac80211 itself and to mac80211_hwsim. For the latter driver, we simply invent some noise level.A real driver which cannot determine the real channel noise MUST NOT report any noise, especially not a magically conjured one :-) Signed-off-by: Holger Schurig Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'net/mac80211/cfg.c') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 4edd73cbf052..f97dda735cbb 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -410,6 +410,17 @@ static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev, return ret; } +static int ieee80211_dump_survey(struct wiphy *wiphy, struct net_device *dev, + int idx, struct survey_info *survey) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + + if (!local->ops->get_survey) + return -EOPNOTSUPP; + + return drv_get_survey(local, idx, survey); +} + static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev, u8 *mac, struct station_info *sinfo) { @@ -1507,6 +1518,7 @@ struct cfg80211_ops mac80211_config_ops = { .change_station = ieee80211_change_station, .get_station = ieee80211_get_station, .dump_station = ieee80211_dump_station, + .dump_survey = ieee80211_dump_survey, #ifdef CONFIG_MAC80211_MESH .add_mpath = ieee80211_add_mpath, .del_mpath = ieee80211_del_mpath, -- cgit v1.2.3 From f7917af92024d43bc20bc1afc92de27b0bd0f50b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 27 Apr 2010 00:26:34 +0200 Subject: mac80211: fix handling of 4-address-mode in ieee80211_change_iface A misplaced interface type check bails out too early if the interface is not in monitor mode. This patch moves it to the right place, so that it only covers changes to the monitor flags. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'net/mac80211/cfg.c') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index f97dda735cbb..592f07d2ae5c 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -96,9 +96,6 @@ static int ieee80211_change_iface(struct wiphy *wiphy, params->mesh_id_len, params->mesh_id); - if (sdata->vif.type != NL80211_IFTYPE_MONITOR || !flags) - return 0; - if (type == NL80211_IFTYPE_AP_VLAN && params && params->use_4addr == 0) rcu_assign_pointer(sdata->u.vlan.sta, NULL); @@ -106,7 +103,9 @@ static int ieee80211_change_iface(struct wiphy *wiphy, params && params->use_4addr >= 0) sdata->u.mgd.use_4addr = params->use_4addr; - sdata->u.mntr_flags = *flags; + if (sdata->vif.type == NL80211_IFTYPE_MONITOR && flags) + sdata->u.mntr_flags = *flags; + return 0; } -- cgit v1.2.3 From 7b7b5e56d7bdfdd0eb5ea13e6c9613b16b8eac46 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 27 Apr 2010 01:23:36 +0200 Subject: mac80211: implement ap isolation support Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'net/mac80211/cfg.c') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 592f07d2ae5c..e13fb3a62239 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1113,6 +1113,13 @@ static int ieee80211_change_bss(struct wiphy *wiphy, changed |= BSS_CHANGED_BASIC_RATES; } + if (params->ap_isolate >= 0) { + if (params->ap_isolate) + sdata->flags |= IEEE80211_SDATA_DONT_BRIDGE_PACKETS; + else + sdata->flags &= ~IEEE80211_SDATA_DONT_BRIDGE_PACKETS; + } + ieee80211_bss_info_change_notify(sdata, changed); return 0; -- cgit v1.2.3 From 195e294d21e88af879da4f88db2ceeb4ec28a755 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Tue, 27 Apr 2010 12:47:40 +0300 Subject: mac80211: Determine dynamic PS timeout based on ps-qos network latency Determine the dynamic PS timeout based on the configured ps-qos network latency. For backwards wext compatibility, allow the dynamic PS timeout configured by the cfg80211 to overrule the automatically determined value. Signed-off-by: Juuso Oikarinen Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net/mac80211/cfg.c') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index e13fb3a62239..b575a5066219 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1404,11 +1404,11 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, return -EOPNOTSUPP; if (enabled == sdata->u.mgd.powersave && - timeout == conf->dynamic_ps_timeout) + timeout == conf->dynamic_ps_forced_timeout) return 0; sdata->u.mgd.powersave = enabled; - conf->dynamic_ps_timeout = timeout; + conf->dynamic_ps_forced_timeout = timeout; /* no change, but if automatic follow powersave */ mutex_lock(&sdata->u.mgd.mtx); -- cgit v1.2.3 From f444de05d20e27cdd960c13fcbcfca3099f03143 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 5 May 2010 15:25:02 +0200 Subject: cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'net/mac80211/cfg.c') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index b575a5066219..414b7dd7d7fd 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1161,11 +1161,24 @@ static int ieee80211_set_txq_params(struct wiphy *wiphy, } static int ieee80211_set_channel(struct wiphy *wiphy, + struct net_device *netdev, struct ieee80211_channel *chan, enum nl80211_channel_type channel_type) { struct ieee80211_local *local = wiphy_priv(wiphy); + switch (ieee80211_get_channel_mode(local, NULL)) { + case CHAN_MODE_HOPPING: + return -EBUSY; + case CHAN_MODE_FIXED: + if (local->oper_channel == chan && + local->oper_channel_type == channel_type) + return 0; + return -EBUSY; + case CHAN_MODE_UNDEFINED: + break; + } + local->oper_channel = chan; local->oper_channel_type = channel_type; @@ -1213,6 +1226,20 @@ static int ieee80211_auth(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_assoc_request *req) { + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + switch (ieee80211_get_channel_mode(local, sdata)) { + case CHAN_MODE_HOPPING: + return -EBUSY; + case CHAN_MODE_FIXED: + if (local->oper_channel == req->bss->channel) + break; + return -EBUSY; + case CHAN_MODE_UNDEFINED: + break; + } + return ieee80211_mgd_assoc(IEEE80211_DEV_TO_SUB_IF(dev), req); } @@ -1235,8 +1262,22 @@ static int ieee80211_disassoc(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_join_ibss(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_ibss_params *params) { + struct ieee80211_local *local = wiphy_priv(wiphy); struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + switch (ieee80211_get_channel_mode(local, sdata)) { + case CHAN_MODE_HOPPING: + return -EBUSY; + case CHAN_MODE_FIXED: + if (!params->channel_fixed) + return -EBUSY; + if (local->oper_channel == params->channel) + break; + return -EBUSY; + case CHAN_MODE_UNDEFINED: + break; + } + return ieee80211_ibss_join(sdata, params); } -- cgit v1.2.3 From 0aaffa9b9699894aab3266195a529baf9f96ac29 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 5 May 2010 15:28:27 +0200 Subject: mac80211: improve HT channel handling Currently, when one interface switches HT mode, all others will follow along. This is clearly undesirable, since the new one might switch to no-HT while another one is operating in HT. Address this issue by keeping track of the HT mode per interface, and allowing only changes that are compatible, i.e. switching into HT40+ is not possible when another interface is in HT40-, in that case the second one needs to fall back to HT20. Also, to allow drivers to know what's going on, store the per-interface HT mode (channel type) in the virtual interface's bss_conf. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) (limited to 'net/mac80211/cfg.c') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 414b7dd7d7fd..ab166c6d9399 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1166,23 +1166,34 @@ static int ieee80211_set_channel(struct wiphy *wiphy, enum nl80211_channel_type channel_type) { struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata = NULL; + + if (netdev) + sdata = IEEE80211_DEV_TO_SUB_IF(netdev); switch (ieee80211_get_channel_mode(local, NULL)) { case CHAN_MODE_HOPPING: return -EBUSY; case CHAN_MODE_FIXED: - if (local->oper_channel == chan && - local->oper_channel_type == channel_type) + if (local->oper_channel != chan) + return -EBUSY; + if (!sdata && local->_oper_channel_type == channel_type) return 0; - return -EBUSY; + break; case CHAN_MODE_UNDEFINED: break; } local->oper_channel = chan; - local->oper_channel_type = channel_type; - return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); + if (!ieee80211_set_channel_type(local, sdata, channel_type)) + return -EBUSY; + + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); + if (sdata && sdata->vif.type != NL80211_IFTYPE_MONITOR) + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT); + + return 0; } #ifdef CONFIG_PM @@ -1406,7 +1417,7 @@ int __ieee80211_request_smps(struct ieee80211_sub_if_data *sdata, * association, there's no need to send an action frame. */ if (!sdata->u.mgd.associated || - sdata->local->oper_channel_type == NL80211_CHAN_NO_HT) { + sdata->vif.bss_conf.channel_type == NL80211_CHAN_NO_HT) { mutex_lock(&sdata->local->iflist_mtx); ieee80211_recalc_smps(sdata->local, sdata); mutex_unlock(&sdata->local->iflist_mtx); -- cgit v1.2.3