From 109cdbc223f6e2d6c80f8371f22415b50c18a366 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 18 May 2012 16:52:19 -0600 Subject: PCI: remove pci_bus_find_ext_capability() (unused) pci_bus_find_ext_capability() is unused, and this patch removes it. Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6ad..2618ad996535 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -714,8 +714,6 @@ enum pci_lost_interrupt_reason pci_lost_interrupt(struct pci_dev *dev); int pci_find_capability(struct pci_dev *dev, int cap); int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap); int pci_find_ext_capability(struct pci_dev *dev, int cap); -int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn, - int cap); int pci_find_ht_capability(struct pci_dev *dev, int ht_cap); int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap); struct pci_bus *pci_find_next_bus(const struct pci_bus *from); -- cgit v1.2.3 From 12ea6cad1c7d046e21decc18b0e2170c6794dc51 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Mon, 11 Jun 2012 05:26:55 +0000 Subject: PCI: add PCI DMA source ID quirk DMA transactions are tagged with the source ID of the device making the request. Occasionally hardware screws this up and uses the source ID of a different device (often the wrong function number of a multifunction device). A specific Ricoh multifunction device is a prime example of this problem and included in this patch. Given a pci_dev, this function returns the pci_dev to use as the source ID for DMA. When hardware works correctly, this returns the input device. For the components of the Ricoh multifunction device, it returns the pci_dev for function 0. This will be used by IOMMU drivers for determining the boundaries of IOMMU groups as multiple devices using the same source ID must be contained within the same group. This can also be used by existing streaming DMA paths for the same purpose. [bhelgaas: fold in pci_dev_get() for !CONFIG_PCI] Signed-off-by: Alex Williamson Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6ad..39983be7b25b 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1332,6 +1332,9 @@ static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus, static inline int pci_domain_nr(struct pci_bus *bus) { return 0; } +static inline struct pci_dev *pci_dev_get(struct pci_dev *dev) +{ return NULL; } + #define dev_is_pci(d) (false) #define dev_is_pf(d) (false) #define dev_num_vf(d) (0) @@ -1486,9 +1489,14 @@ enum pci_fixup_pass { #ifdef CONFIG_PCI_QUIRKS void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); +struct pci_dev *pci_get_dma_source(struct pci_dev *dev); #else static inline void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {} +static inline struct pci_dev *pci_get_dma_source(struct pci_dev *dev) +{ + return pci_dev_get(dev); +} #endif void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen); -- cgit v1.2.3 From c32823f82b42abc1f08b365085862fd1d57c0b61 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Fri, 1 Jun 2012 15:16:25 -0600 Subject: PCI: make pci_ltr_supported() static The PCI Express Latency Tolerance Reporting (LTR) feature's pci_ltr_supported() routine is currently only used within drivers/pci/pci.c so make it static. Acked-by: Donald Dutile Signed-off-by: Myron Stowe Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6ad..b2bec26b7f0a 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -875,7 +875,6 @@ enum pci_obff_signal_type { int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type); void pci_disable_obff(struct pci_dev *dev); -bool pci_ltr_supported(struct pci_dev *dev); int pci_enable_ltr(struct pci_dev *dev); void pci_disable_ltr(struct pci_dev *dev); int pci_set_ltr(struct pci_dev *dev, int snoop_lat_ns, int nosnoop_lat_ns); -- cgit v1.2.3 From c463b8cb9350cf1230cefe467a1cf279140a5437 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Fri, 1 Jun 2012 15:16:37 -0600 Subject: PCI: add pci_pcie_cap2() check for PCIe feature capabilities >= v2 This patch resolves potential issues when accessing PCI Express Capability structures. The makeup of the capability varies substantially between v1 and v2: Version 1 of the PCI Express Capability (defined by PCI Express 1.0 and 1.1 base) neither requires the endpoint to implement the entire PCIe capability structure nor specifies default values of registers that are not implemented by the device. Version 2 of the PCI Express Capability (defined by PCIe 1.1 Capability Structure Expansion ECN, PCIe 2.0, 2.1, and 3.0) added additional registers to the structure and requires all registers to be either implemented or hardwired to 0. Due to the differences in the capability structures, code dealing with capability features must be careful not to access the additional registers introduced with v2 unless the device is specifically known to be a v2 capable device. Otherwise, attempts to access non-existant registers will occur. This is a subtle issue that is hard to track down when it occurs (and it has - see commit 864d296cf94). To try and help mitigate such occurrences, this patch introduces pci_pcie_cap2() which is similar to pci_pcie_cap() but also checks that the PCIe capability version is >= 2. pci_pcie_cap2() should be used for qualifying PCIe capability features introduced after v1. Suggested by Don Dutile. Acked-by: Donald Dutile Signed-off-by: Myron Stowe Signed-off-by: Bjorn Helgaas --- include/linux/pci_regs.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 4b608f543412..e7642f5bb12a 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -507,6 +507,12 @@ #define PCI_EXP_RTSTA 32 /* Root Status */ #define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ #define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ +/* + * Note that the following PCI Express 'Capability Structure' registers + * were introduced with 'Capability Version' 0x2 (v2). These registers + * do not exist on devices with Capability Version 1. Use pci_pcie_cap2() + * to use these fields safely. + */ #define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ #define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */ #define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */ -- cgit v1.2.3 From ad805758c0eb25bce7b2e3b298d63dc62a1bc71c Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Mon, 11 Jun 2012 05:27:07 +0000 Subject: PCI: add ACS validation utility In a PCI environment, transactions aren't always required to reach the root bus before being re-routed. Intermediate switches between an endpoint and the root bus can redirect DMA back downstream before things like IOMMUs have a chance to intervene. Legacy PCI is always susceptible to this as it operates on a shared bus. PCIe added a new capability to describe and control this behavior, Access Control Services, or ACS. The utility function pci_acs_enabled() allows us to test the ACS capabilities of an individual devices against a set of flags while pci_acs_path_enabled() tests a complete path from a given downstream device up to the specified upstream device. We also include the ability to add device specific tests as it's likely we'll see devices that do not implement ACS, but want to indicate support for various capabilities in this space. Signed-off-by: Alex Williamson Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index 39983be7b25b..dd7af0f37b3a 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1490,6 +1490,7 @@ enum pci_fixup_pass { #ifdef CONFIG_PCI_QUIRKS void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); struct pci_dev *pci_get_dma_source(struct pci_dev *dev); +int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags); #else static inline void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {} @@ -1497,6 +1498,11 @@ static inline struct pci_dev *pci_get_dma_source(struct pci_dev *dev) { return pci_dev_get(dev); } +static inline int pci_dev_specific_acs_enabled(struct pci_dev *dev, + u16 acs_flags) +{ + return -ENOTTY; +} #endif void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen); @@ -1599,7 +1605,9 @@ static inline bool pci_is_pcie(struct pci_dev *dev) } void pci_request_acs(void); - +bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags); +bool pci_acs_path_enabled(struct pci_dev *start, + struct pci_dev *end, u16 acs_flags); #define PCI_VPD_LRDT 0x80 /* Large Resource Data Type */ #define PCI_VPD_LRDT_ID(x) (x | PCI_VPD_LRDT) -- cgit v1.2.3 From c63587d7f5b9db84e71daf5962dc0394eb657da2 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Mon, 11 Jun 2012 05:27:19 +0000 Subject: PCI: export pci_user functions for use by other drivers VFIO PCI support will make use of these for user-initiated PCI config accesses. Signed-off-by: Alex Williamson Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index dd7af0f37b3a..9d04599c6bd9 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -777,6 +777,14 @@ static inline int pci_write_config_dword(const struct pci_dev *dev, int where, return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val); } +/* user-space driven config access */ +int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val); +int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val); +int pci_user_read_config_dword(struct pci_dev *dev, int where, u32 *val); +int pci_user_write_config_byte(struct pci_dev *dev, int where, u8 val); +int pci_user_write_config_word(struct pci_dev *dev, int where, u16 val); +int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val); + int __must_check pci_enable_device(struct pci_dev *dev); int __must_check pci_enable_device_io(struct pci_dev *dev); int __must_check pci_enable_device_mem(struct pci_dev *dev); -- cgit v1.2.3 From a6961651408afa9387d6df43c4a1dc4fd35dcb1b Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Mon, 11 Jun 2012 05:27:33 +0000 Subject: PCI: create common pcibios_err_to_errno For returning errors out to non-PCI code. Re-name xen's version. Acked-by: Konrad Rzeszutek Wilk Signed-off-by: Alex Williamson Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index 9d04599c6bd9..a691f62bcf89 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -474,6 +474,32 @@ static inline bool pci_dev_msi_enabled(struct pci_dev *pci_dev) { return false; #define PCIBIOS_SET_FAILED 0x88 #define PCIBIOS_BUFFER_TOO_SMALL 0x89 +/* + * Translate above to generic errno for passing back through non-pci. + */ +static inline int pcibios_err_to_errno(int err) +{ + if (err <= PCIBIOS_SUCCESSFUL) + return err; /* Assume already errno */ + + switch (err) { + case PCIBIOS_FUNC_NOT_SUPPORTED: + return -ENOENT; + case PCIBIOS_BAD_VENDOR_ID: + return -EINVAL; + case PCIBIOS_DEVICE_NOT_FOUND: + return -ENODEV; + case PCIBIOS_BAD_REGISTER_NUMBER: + return -EFAULT; + case PCIBIOS_SET_FAILED: + return -EIO; + case PCIBIOS_BUFFER_TOO_SMALL: + return -ENOSPC; + } + + return -ENOTTY; +} + /* Low-level architecture-dependent routines */ struct pci_ops { -- cgit v1.2.3 From a0dee2ed0cdc666b5622f1fc74979355a6b36850 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Mon, 11 Jun 2012 05:27:45 +0000 Subject: PCI: misc pci_reg additions Fill in many missing definitions and add sizeof fields for many sections allowing for more extensive config parsing. Signed-off-by: Alex Williamson Signed-off-by: Bjorn Helgaas --- include/linux/pci_regs.h | 113 ++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 101 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 4b608f543412..526d2c4bc3a6 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -26,6 +26,7 @@ * Under PCI, each device has 256 bytes of configuration address space, * of which the first 64 bytes are standardized as follows: */ +#define PCI_STD_HEADER_SIZEOF 64 #define PCI_VENDOR_ID 0x00 /* 16 bits */ #define PCI_DEVICE_ID 0x02 /* 16 bits */ #define PCI_COMMAND 0x04 /* 16 bits */ @@ -209,9 +210,12 @@ #define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ #define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */ #define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */ +#define PCI_CAP_ID_SECDEV 0x0F /* Secure Device */ #define PCI_CAP_ID_EXP 0x10 /* PCI Express */ #define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ +#define PCI_CAP_ID_SATA 0x12 /* SATA Data/Index Conf. */ #define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */ +#define PCI_CAP_ID_MAX PCI_CAP_ID_AF #define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */ #define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ #define PCI_CAP_SIZEOF 4 @@ -276,6 +280,7 @@ #define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */ #define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */ #define PCI_VPD_DATA 4 /* 32-bits of data returned here */ +#define PCI_CAP_VPD_SIZEOF 8 /* Slot Identification */ @@ -297,8 +302,10 @@ #define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ #define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */ #define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */ +#define PCI_MSI_PENDING_32 16 /* Pending intrs for 32-bit devices */ #define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ #define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */ +#define PCI_MSI_PENDING_64 20 /* Pending intrs for 64-bit devices */ /* MSI-X registers */ #define PCI_MSIX_FLAGS 2 @@ -308,6 +315,7 @@ #define PCI_MSIX_TABLE 4 #define PCI_MSIX_PBA 8 #define PCI_MSIX_FLAGS_BIRMASK (7 << 0) +#define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX registers */ /* MSI-X entry's format */ #define PCI_MSIX_ENTRY_SIZE 16 @@ -338,6 +346,7 @@ #define PCI_AF_CTRL_FLR 0x01 #define PCI_AF_STATUS 5 #define PCI_AF_STATUS_TP 0x01 +#define PCI_CAP_AF_SIZEOF 6 /* size of AF registers */ /* PCI-X registers */ @@ -374,6 +383,10 @@ #define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */ #define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */ #define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */ +#define PCI_X_ECC_CSR 8 /* ECC control and status */ +#define PCI_CAP_PCIX_SIZEOF_V0 8 /* size of registers for Version 0 */ +#define PCI_CAP_PCIX_SIZEOF_V1 24 /* size for Version 1 */ +#define PCI_CAP_PCIX_SIZEOF_V2 PCI_CAP_PCIX_SIZEOF_V1 /* Same for v2 */ /* PCI Bridge Subsystem ID registers */ @@ -462,6 +475,7 @@ #define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */ #define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */ #define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */ +#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints end here */ #define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ #define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */ #define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */ @@ -521,6 +535,7 @@ #define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */ #define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */ #define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ +#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ #define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ @@ -529,23 +544,43 @@ #define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf) #define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc) -#define PCI_EXT_CAP_ID_ERR 1 -#define PCI_EXT_CAP_ID_VC 2 -#define PCI_EXT_CAP_ID_DSN 3 -#define PCI_EXT_CAP_ID_PWR 4 -#define PCI_EXT_CAP_ID_VNDR 11 -#define PCI_EXT_CAP_ID_ACS 13 -#define PCI_EXT_CAP_ID_ARI 14 -#define PCI_EXT_CAP_ID_ATS 15 -#define PCI_EXT_CAP_ID_SRIOV 16 -#define PCI_EXT_CAP_ID_PRI 19 -#define PCI_EXT_CAP_ID_LTR 24 -#define PCI_EXT_CAP_ID_PASID 27 +#define PCI_EXT_CAP_ID_ERR 0x01 /* Advanced Error Reporting */ +#define PCI_EXT_CAP_ID_VC 0x02 /* Virtual Channel Capability */ +#define PCI_EXT_CAP_ID_DSN 0x03 /* Device Serial Number */ +#define PCI_EXT_CAP_ID_PWR 0x04 /* Power Budgeting */ +#define PCI_EXT_CAP_ID_RCLD 0x05 /* Root Complex Link Declaration */ +#define PCI_EXT_CAP_ID_RCILC 0x06 /* Root Complex Internal Link Control */ +#define PCI_EXT_CAP_ID_RCEC 0x07 /* Root Complex Event Collector */ +#define PCI_EXT_CAP_ID_MFVC 0x08 /* Multi-Function VC Capability */ +#define PCI_EXT_CAP_ID_VC9 0x09 /* same as _VC */ +#define PCI_EXT_CAP_ID_RCRB 0x0A /* Root Complex RB? */ +#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor Specific */ +#define PCI_EXT_CAP_ID_CAC 0x0C /* Config Access - obsolete */ +#define PCI_EXT_CAP_ID_ACS 0x0D /* Access Control Services */ +#define PCI_EXT_CAP_ID_ARI 0x0E /* Alternate Routing ID */ +#define PCI_EXT_CAP_ID_ATS 0x0F /* Address Translation Services */ +#define PCI_EXT_CAP_ID_SRIOV 0x10 /* Single Root I/O Virtualization */ +#define PCI_EXT_CAP_ID_MRIOV 0x11 /* Multi Root I/O Virtualization */ +#define PCI_EXT_CAP_ID_MCAST 0x12 /* Multicast */ +#define PCI_EXT_CAP_ID_PRI 0x13 /* Page Request Interface */ +#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* reserved for AMD */ +#define PCI_EXT_CAP_ID_REBAR 0x15 /* resizable BAR */ +#define PCI_EXT_CAP_ID_DPA 0x16 /* dynamic power alloc */ +#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH request */ +#define PCI_EXT_CAP_ID_LTR 0x18 /* latency tolerance reporting */ +#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe */ +#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */ +#define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */ +#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PASID + +#define PCI_EXT_CAP_DSN_SIZEOF 12 +#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40 /* Advanced Error Reporting */ #define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ #define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */ #define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */ +#define PCI_ERR_UNC_SURPDN 0x00000020 /* Surprise Down */ #define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */ #define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */ #define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */ @@ -555,6 +590,11 @@ #define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */ #define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */ #define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */ +#define PCI_ERR_UNC_ACSV 0x00200000 /* ACS Violation */ +#define PCI_ERR_UNC_INTN 0x00400000 /* internal error */ +#define PCI_ERR_UNC_MCBTLP 0x00800000 /* MC blocked TLP */ +#define PCI_ERR_UNC_ATOMEG 0x01000000 /* Atomic egress blocked */ +#define PCI_ERR_UNC_TLPPRE 0x02000000 /* TLP prefix blocked */ #define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */ /* Same bits as above */ #define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */ @@ -565,6 +605,9 @@ #define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */ #define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */ #define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */ +#define PCI_ERR_COR_ADV_NFAT 0x00002000 /* Advisory Non-Fatal */ +#define PCI_ERR_COR_INTERNAL 0x00004000 /* Corrected Internal */ +#define PCI_ERR_COR_LOG_OVER 0x00008000 /* Header Log Overflow */ #define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */ /* Same bits as above */ #define PCI_ERR_CAP 24 /* Advanced Error Capabilities */ @@ -596,12 +639,18 @@ /* Virtual Channel */ #define PCI_VC_PORT_REG1 4 +#define PCI_VC_REG1_EVCC 0x7 /* extended vc count */ #define PCI_VC_PORT_REG2 8 +#define PCI_VC_REG2_32_PHASE 0x2 +#define PCI_VC_REG2_64_PHASE 0x4 +#define PCI_VC_REG2_128_PHASE 0x8 #define PCI_VC_PORT_CTRL 12 #define PCI_VC_PORT_STATUS 14 #define PCI_VC_RES_CAP 16 #define PCI_VC_RES_CTRL 20 #define PCI_VC_RES_STATUS 26 +#define PCI_CAP_VC_BASE_SIZEOF 0x10 +#define PCI_CAP_VC_PER_VC_SIZEOF 0x0C /* Power Budgeting */ #define PCI_PWR_DSR 4 /* Data Select Register */ @@ -614,6 +663,7 @@ #define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */ #define PCI_PWR_CAP 12 /* Capability */ #define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ +#define PCI_EXT_CAP_PWR_SIZEOF 16 /* * Hypertransport sub capability types @@ -646,6 +696,8 @@ #define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */ #define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */ #define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */ +#define HT_CAP_SIZEOF_LONG 28 /* slave & primary */ +#define HT_CAP_SIZEOF_SHORT 24 /* host & secondary */ /* Alternative Routing-ID Interpretation */ #define PCI_ARI_CAP 0x04 /* ARI Capability Register */ @@ -656,6 +708,7 @@ #define PCI_ARI_CTRL_MFVC 0x0001 /* MFVC Function Groups Enable */ #define PCI_ARI_CTRL_ACS 0x0002 /* ACS Function Groups Enable */ #define PCI_ARI_CTRL_FG(x) (((x) >> 4) & 7) /* Function Group */ +#define PCI_EXT_CAP_ARI_SIZEOF 8 /* Address Translation Service */ #define PCI_ATS_CAP 0x04 /* ATS Capability Register */ @@ -665,6 +718,7 @@ #define PCI_ATS_CTRL_ENABLE 0x8000 /* ATS Enable */ #define PCI_ATS_CTRL_STU(x) ((x) & 0x1f) /* Smallest Translation Unit */ #define PCI_ATS_MIN_STU 12 /* shift of minimum STU block */ +#define PCI_EXT_CAP_ATS_SIZEOF 8 /* Page Request Interface */ #define PCI_PRI_CTRL 0x04 /* PRI control register */ @@ -676,6 +730,7 @@ #define PCI_PRI_STATUS_STOPPED 0x100 /* PRI Stopped */ #define PCI_PRI_MAX_REQ 0x08 /* PRI max reqs supported */ #define PCI_PRI_ALLOC_REQ 0x0c /* PRI max reqs allowed */ +#define PCI_EXT_CAP_PRI_SIZEOF 16 /* PASID capability */ #define PCI_PASID_CAP 0x04 /* PASID feature register */ @@ -685,6 +740,7 @@ #define PCI_PASID_CTRL_ENABLE 0x01 /* Enable bit */ #define PCI_PASID_CTRL_EXEC 0x02 /* Exec permissions Enable */ #define PCI_PASID_CTRL_PRIV 0x04 /* Priviledge Mode Enable */ +#define PCI_EXT_CAP_PASID_SIZEOF 8 /* Single Root I/O Virtualization */ #define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */ @@ -716,12 +772,14 @@ #define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */ #define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */ #define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */ +#define PCI_EXT_CAP_SRIOV_SIZEOF 64 #define PCI_LTR_MAX_SNOOP_LAT 0x4 #define PCI_LTR_MAX_NOSNOOP_LAT 0x6 #define PCI_LTR_VALUE_MASK 0x000003ff #define PCI_LTR_SCALE_MASK 0x00001c00 #define PCI_LTR_SCALE_SHIFT 10 +#define PCI_EXT_CAP_LTR_SIZEOF 8 /* Access Control Service */ #define PCI_ACS_CAP 0x04 /* ACS Capability Register */ @@ -732,7 +790,38 @@ #define PCI_ACS_UF 0x10 /* Upstream Forwarding */ #define PCI_ACS_EC 0x20 /* P2P Egress Control */ #define PCI_ACS_DT 0x40 /* Direct Translated P2P */ +#define PCI_ACS_EGRESS_BITS 0x05 /* ACS Egress Control Vector Size */ #define PCI_ACS_CTRL 0x06 /* ACS Control Register */ #define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */ +#define PCI_VSEC_HDR 4 /* extended cap - vendor specific */ +#define PCI_VSEC_HDR_LEN_SHIFT 20 /* shift for length field */ + +/* sata capability */ +#define PCI_SATA_REGS 4 /* SATA REGs specifier */ +#define PCI_SATA_REGS_MASK 0xF /* location - BAR#/inline */ +#define PCI_SATA_REGS_INLINE 0xF /* REGS in config space */ +#define PCI_SATA_SIZEOF_SHORT 8 +#define PCI_SATA_SIZEOF_LONG 16 + +/* resizable BARs */ +#define PCI_REBAR_CTRL 8 /* control register */ +#define PCI_REBAR_CTRL_NBAR_MASK (7 << 5) /* mask for # bars */ +#define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for # bars */ + +/* dynamic power allocation */ +#define PCI_DPA_CAP 4 /* capability register */ +#define PCI_DPA_CAP_SUBSTATE_MASK 0x1F /* # substates - 1 */ +#define PCI_DPA_BASE_SIZEOF 16 /* size with 0 substates */ + +/* TPH Requester */ +#define PCI_TPH_CAP 4 /* capability register */ +#define PCI_TPH_CAP_LOC_MASK 0x600 /* location mask */ +#define PCI_TPH_LOC_NONE 0x000 /* no location */ +#define PCI_TPH_LOC_CAP 0x200 /* in capability */ +#define PCI_TPH_LOC_MSIX 0x400 /* in MSI-X */ +#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* st table mask */ +#define PCI_TPH_CAP_ST_SHIFT 16 /* st table shift */ +#define PCI_TPH_BASE_SIZEOF 12 /* size with no st table */ + #endif /* LINUX_PCI_REGS_H */ -- cgit v1.2.3 From 92f02430934ca1c1e991a1ab3541880575042697 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 17 May 2012 18:51:11 -0700 Subject: PCI: add busn_res in struct pci_bus This adds a busn_res resource in struct pci_bus. This will replace the secondary/subordinate members and will be used to build a bus number resource tree to help with bus number allocation. [bhelgaas: changelog] CC: Andrew Morton Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6ad..ba7c5cd314b7 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -419,6 +419,7 @@ struct pci_bus { struct list_head slots; /* list of slots on this bus */ struct resource *resource[PCI_BRIDGE_RESOURCE_NUM]; struct list_head resources; /* address space routed to this bus */ + struct resource busn_res; /* bus numbers routed to this bus */ struct pci_ops *ops; /* configuration access functions */ void *sysdata; /* hook for sys-specific extension */ -- cgit v1.2.3 From 3527ed81ca01bbaf09df952e68528377a9cd092f Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 17 May 2012 18:51:11 -0700 Subject: PCI: remove secondary/subordinate in struct pci_bus The pci_bus secondary/subordinate members are now unused, so remove them. Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index ba7c5cd314b7..6b10966cd1b9 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -427,8 +427,6 @@ struct pci_bus { unsigned char number; /* bus number */ unsigned char primary; /* number of primary bridge */ - unsigned char secondary; /* number of secondary bridge */ - unsigned char subordinate; /* max number of subordinate buses */ unsigned char max_bus_speed; /* enum pci_bus_speed */ unsigned char cur_bus_speed; /* enum pci_bus_speed */ -- cgit v1.2.3 From 98a3583107ed587ed3cfe2a1d8e5347421de5a80 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 18 May 2012 11:35:50 -0600 Subject: PCI: add busn_res operation functions Will use them insert/update busn res in pci_bus struct. [bhelgaas: print conflicting entry if insertion fails] Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index 6b10966cd1b9..c4df570f3bbb 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -667,6 +667,9 @@ struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata); struct pci_bus *pci_create_root_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata, struct list_head *resources); +int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int busmax); +int pci_bus_update_busn_res_end(struct pci_bus *b, int busmax); +void pci_bus_release_busn_res(struct pci_bus *b); struct pci_bus * __devinit pci_scan_root_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata, struct list_head *resources); -- cgit v1.2.3 From 67cdc827286366acb6c60c821013c1185ee00b36 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 17 May 2012 18:51:12 -0700 Subject: PCI: add default busn_resource We need to put into the resources list for legacy system. Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index c4df570f3bbb..8c8b44d62105 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -368,6 +368,8 @@ static inline int pci_channel_offline(struct pci_dev *pdev) return (pdev->error_state != pci_channel_io_normal); } +extern struct resource busn_resource; + struct pci_host_bridge_window { struct list_head list; struct resource *res; /* host bridge aperture (CPU address) */ -- cgit v1.2.3 From fbebb9fd22581b6422d60669c4ff86ce99d6cdba Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Sat, 16 Jun 2012 14:40:22 -0600 Subject: PCI: add infrastructure for devices with broken INTx masking pci_intx_mask_supported() assumes INTx masking is supported if the PCI_COMMAND_INTX_DISABLE bit is writable. But when that bit is set, some devices don't actually mask INTx or update PCI_STATUS_INTERRUPT as we expect. This patch adds a way for quirks to identify these broken devices. [bhelgaas: split out from Chelsio quirk addition] Signed-off-by: Jan Kiszka Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6ad..40a039f1dffb 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -324,6 +324,7 @@ struct pci_dev { unsigned int is_hotplug_bridge:1; unsigned int __aer_firmware_first_valid:1; unsigned int __aer_firmware_first:1; + unsigned int broken_intx_masking:1; pci_dev_flags_t dev_flags; atomic_t enable_cnt; /* pci_enable_device has been called */ -- cgit v1.2.3 From f4b57a3b4352f72e461e362cb25917e28bdba80f Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Fri, 22 Jun 2012 14:55:16 +0800 Subject: PCI/ACPI: provide MMCONFIG address for PCI host bridges This patch provide MMCONFIG address for PCI host bridges, which will be used to support host bridge hotplug. It gets MMCONFIG address by evaluating _CBA method if available. Reviewed-by: Yinghai Lu Signed-off-by: Jiang Liu Signed-off-by: Bjorn Helgaas --- include/linux/pci-acpi.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h index 44623500f419..248fba2af98a 100644 --- a/include/linux/pci-acpi.h +++ b/include/linux/pci-acpi.h @@ -17,6 +17,7 @@ extern acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev); extern acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev, struct pci_dev *pci_dev); extern acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev); +extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle); static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev) { -- cgit v1.2.3 From 397038519f2c2ac68c125c0cd766e91041c52b30 Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Fri, 22 Jun 2012 14:55:21 +0800 Subject: ACPI: mark acpi_sfi_table_parse() as __init Mark function acpi_sfi_table_parse() as __init to avoid warning messages: WARNING: vmlinux.o(.text+0x4cd2d2): Section mismatch in reference from the function acpi_sfi_table_parse.clone.0() to the function Function acpi_sfi_table_parse() calls acpi_table_parse() and pci_parse_mcfg(), which are both marked as __init. Currently acpi_sfi_table_parse() is only used by MMCONFIG to scan MCFG table at boot time only, so it's safe to mark acpi_sfi_table_parse() as __init. Reviewed-by: Yinghai Lu Signed-off-by: Jiang Liu Signed-off-by: Bjorn Helgaas --- include/linux/sfi_acpi.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sfi_acpi.h b/include/linux/sfi_acpi.h index c4a5a8cd4469..631af63af42d 100644 --- a/include/linux/sfi_acpi.h +++ b/include/linux/sfi_acpi.h @@ -66,7 +66,7 @@ extern int sfi_acpi_table_parse(char *signature, char *oem_id, char *oem_table_id, int (*handler)(struct acpi_table_header *)); -static inline int acpi_sfi_table_parse(char *signature, +static inline int __init acpi_sfi_table_parse(char *signature, int (*handler)(struct acpi_table_header *)) { if (!acpi_table_parse(signature, handler)) @@ -83,7 +83,7 @@ static inline int sfi_acpi_table_parse(char *signature, char *oem_id, return -1; } -static inline int acpi_sfi_table_parse(char *signature, +static inline int __init acpi_sfi_table_parse(char *signature, int (*handler)(struct acpi_table_header *)) { return acpi_table_parse(signature, handler); -- cgit v1.2.3 From 448bd857d48e69b33ef323739dc6d8ca20d4cda7 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Sat, 23 Jun 2012 10:23:51 +0800 Subject: PCI/PM: add PCIe runtime D3cold support This patch adds runtime D3cold support and corresponding ACPI platform support. This patch only enables runtime D3cold support; it does not enable D3cold support during system suspend/hibernate. D3cold is the deepest power saving state for a PCIe device, where its main power is removed. While it is in D3cold, you can't access the device at all, not even its configuration space (which is still accessible in D3hot). Therefore the PCI PM registers can not be used to transition into/out of the D3cold state; that must be done by platform logic such as ACPI _PR3. To support wakeup from D3cold, a system may provide auxiliary power, which allows a device to request wakeup using a Beacon or the sideband WAKE# signal. WAKE# is usually connected to platform logic such as ACPI GPE. This is quite different from other power saving states, where devices request wakeup via a PME message on the PCIe link. Some devices, such as those in plug-in slots, have no direct platform logic. For example, there is usually no ACPI _PR3 for them. D3cold support for these devices can be done via the PCIe Downstream Port leading to the device. When the PCIe port is powered on/off, the device is powered on/off too. Wakeup events from the device will be notified to the corresponding PCIe port. For more information about PCIe D3cold and corresponding ACPI support, please refer to: - PCI Express Base Specification Revision 2.0 - Advanced Configuration and Power Interface Specification Revision 5.0 [bhelgaas: changelog] Reviewed-by: Rafael J. Wysocki Originally-by: Zheng Yan Signed-off-by: Huang Ying Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6ad..002cfd3e33ca 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -132,9 +132,10 @@ static inline const char *pci_power_name(pci_power_t state) return pci_power_names[1 + (int) state]; } -#define PCI_PM_D2_DELAY 200 -#define PCI_PM_D3_WAIT 10 -#define PCI_PM_BUS_WAIT 50 +#define PCI_PM_D2_DELAY 200 +#define PCI_PM_D3_WAIT 10 +#define PCI_PM_D3COLD_WAIT 100 +#define PCI_PM_BUS_WAIT 50 /** The pci_channel state describes connectivity between the CPU and * the pci device. If some PCI bus between here and the pci device @@ -278,11 +279,18 @@ struct pci_dev { unsigned int pme_poll:1; /* Poll device's PME status bit */ unsigned int d1_support:1; /* Low power state D1 is supported */ unsigned int d2_support:1; /* Low power state D2 is supported */ - unsigned int no_d1d2:1; /* Only allow D0 and D3 */ + unsigned int no_d1d2:1; /* D1 and D2 are forbidden */ + unsigned int no_d3cold:1; /* D3cold is forbidden */ + unsigned int d3cold_allowed:1; /* D3cold is allowed by user */ unsigned int mmio_always_on:1; /* disallow turning off io/mem decoding during bar sizing */ unsigned int wakeup_prepared:1; + unsigned int runtime_d3cold:1; /* whether go through runtime + D3cold, not set for devices + powered on/off by the + corresponding bridge */ unsigned int d3_delay; /* D3->D0 transition time in ms */ + unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */ #ifdef CONFIG_PCIEASPM struct pcie_link_state *link_state; /* ASPM link state. */ -- cgit v1.2.3 From 2b6f2c3520124e8bad4bffa71f5b98e602b9cf03 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Mon, 25 Jun 2012 21:30:57 -0600 Subject: PCI: pull pcibios_setup() up into core Currently, all of the architectures implement their own pcibios_setup() routine. Most of the implementations do nothing so this patch introduces a generic (__weak) routine in the core that can be used by all architectures as a default. If necessary, it can be overridden by architecture-specific code. Signed-off-by: Myron Stowe Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6ad..f91143e86f85 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -642,6 +642,7 @@ extern int no_pci_devices(void); void pcibios_fixup_bus(struct pci_bus *); int __must_check pcibios_enable_device(struct pci_dev *, int mask); +/* Architecture specific versions may override this (weak) */ char *pcibios_setup(char *str); /* Used only when drivers/pci/setup.c is used */ -- cgit v1.2.3 From 2b28ae1912e5ce5bb0527e352ae6ff04e76183d1 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 9 Jul 2012 13:38:57 -0600 Subject: PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2) 9d265124d051 and 15a260d53f7c added quirks for P2P bridges that support I/O windows that start/end at 1K boundaries, not just the 4K boundaries defined by the PCI spec. For details, see the IOBL_ADR register and the EN1K bit in the CNF register in the Intel 82870P2 (P64H2). These quirks complicate the code that reads P2P bridge windows (pci_read_bridge_io() and pci_cfg_fake_ranges()) because the bridge I/O resource is updated in the HEADER quirk, in pci_read_bridge_io(), in pci_setup_bridge(), and again in the FINAL quirk. This is confusing and makes it impossible to reassign the bridge windows after FINAL quirks are run. This patch adds support for 1K windows in the generic paths, so the HEADER quirk only has to enable this support. The FINAL quirk, which used to undo damage done by pci_setup_bridge(), is no longer needed. This removes "if (!res->start) res->start = ..." from pci_read_bridge_io(); that was part of 9d265124d051 to avoid overwriting the resource filled in by the quirk. Since pci_read_bridge_io() itself now knows about granularity, the quirk no longer updates the resource and this test is no longer needed. Signed-off-by: Bjorn Helgaas --- include/linux/pci.h | 1 + include/linux/pci_regs.h | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d8c379dba6ad..89b46fd245c6 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -324,6 +324,7 @@ struct pci_dev { unsigned int is_hotplug_bridge:1; unsigned int __aer_firmware_first_valid:1; unsigned int __aer_firmware_first:1; + unsigned int io_window_1k:1; /* Intel P2P bridge 1K I/O windows */ pci_dev_flags_t dev_flags; atomic_t enable_cnt; /* pci_enable_device has been called */ diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 4b608f543412..88c9ea56e252 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -125,7 +125,8 @@ #define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */ #define PCI_IO_RANGE_TYPE_16 0x00 #define PCI_IO_RANGE_TYPE_32 0x01 -#define PCI_IO_RANGE_MASK (~0x0fUL) +#define PCI_IO_RANGE_MASK (~0x0fUL) /* Standard 4K I/O windows */ +#define PCI_IO_1K_RANGE_MASK (~0x03UL) /* Intel 1K I/O windows */ #define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */ #define PCI_MEMORY_BASE 0x20 /* Memory range behind */ #define PCI_MEMORY_LIMIT 0x22 -- cgit v1.2.3