From b86aeafc766b71f6d55e54ed2c77fdf7f56ec1ba Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Wed, 25 Apr 2012 16:06:20 +0530 Subject: ARM: OMAP2+: SmartReflex: move the smartreflex header to include/linux/power Move the smartreflex header file (arch/arm/mach-omap2/smartreflex.h) in a new header file include/linux/power/smartreflex.h. This change makes the SmartReflex implementation ready for the move to drivers/. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 257 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 257 insertions(+) create mode 100644 include/linux/power/smartreflex.h (limited to 'include/linux/power/smartreflex.h') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h new file mode 100644 index 000000000000..69eb270c6297 --- /dev/null +++ b/include/linux/power/smartreflex.h @@ -0,0 +1,257 @@ +/* + * OMAP Smartreflex Defines and Routines + * + * Author: Thara Gopinath + * + * Copyright (C) 2010 Texas Instruments, Inc. + * Thara Gopinath + * + * Copyright (C) 2008 Nokia Corporation + * Kalle Jokiniemi + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Lesly A M + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __POWER_SMARTREFLEX_H +#define __POWER_SMARTREFLEX_H + +#include +#include + +#include + +/* + * Different Smartreflex IPs version. The v1 is the 65nm version used in + * OMAP3430. The v2 is the update for the 45nm version of the IP + * used in OMAP3630 and OMAP4430 + */ +#define SR_TYPE_V1 1 +#define SR_TYPE_V2 2 + +/* SMART REFLEX REG ADDRESS OFFSET */ +#define SRCONFIG 0x00 +#define SRSTATUS 0x04 +#define SENVAL 0x08 +#define SENMIN 0x0C +#define SENMAX 0x10 +#define SENAVG 0x14 +#define AVGWEIGHT 0x18 +#define NVALUERECIPROCAL 0x1c +#define SENERROR_V1 0x20 +#define ERRCONFIG_V1 0x24 +#define IRQ_EOI 0x20 +#define IRQSTATUS_RAW 0x24 +#define IRQSTATUS 0x28 +#define IRQENABLE_SET 0x2C +#define IRQENABLE_CLR 0x30 +#define SENERROR_V2 0x34 +#define ERRCONFIG_V2 0x38 + +/* Bit/Shift Positions */ + +/* SRCONFIG */ +#define SRCONFIG_ACCUMDATA_SHIFT 22 +#define SRCONFIG_SRCLKLENGTH_SHIFT 12 +#define SRCONFIG_SENNENABLE_V1_SHIFT 5 +#define SRCONFIG_SENPENABLE_V1_SHIFT 3 +#define SRCONFIG_SENNENABLE_V2_SHIFT 1 +#define SRCONFIG_SENPENABLE_V2_SHIFT 0 +#define SRCONFIG_CLKCTRL_SHIFT 0 + +#define SRCONFIG_ACCUMDATA_MASK (0x3ff << 22) + +#define SRCONFIG_SRENABLE BIT(11) +#define SRCONFIG_SENENABLE BIT(10) +#define SRCONFIG_ERRGEN_EN BIT(9) +#define SRCONFIG_MINMAXAVG_EN BIT(8) +#define SRCONFIG_DELAYCTRL BIT(2) + +/* AVGWEIGHT */ +#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT 2 +#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT 0 + +/* NVALUERECIPROCAL */ +#define NVALUERECIPROCAL_SENPGAIN_SHIFT 20 +#define NVALUERECIPROCAL_SENNGAIN_SHIFT 16 +#define NVALUERECIPROCAL_RNSENP_SHIFT 8 +#define NVALUERECIPROCAL_RNSENN_SHIFT 0 + +/* ERRCONFIG */ +#define ERRCONFIG_ERRWEIGHT_SHIFT 16 +#define ERRCONFIG_ERRMAXLIMIT_SHIFT 8 +#define ERRCONFIG_ERRMINLIMIT_SHIFT 0 + +#define SR_ERRWEIGHT_MASK (0x07 << 16) +#define SR_ERRMAXLIMIT_MASK (0xff << 8) +#define SR_ERRMINLIMIT_MASK (0xff << 0) + +#define ERRCONFIG_VPBOUNDINTEN_V1 BIT(31) +#define ERRCONFIG_VPBOUNDINTST_V1 BIT(30) +#define ERRCONFIG_MCUACCUMINTEN BIT(29) +#define ERRCONFIG_MCUACCUMINTST BIT(28) +#define ERRCONFIG_MCUVALIDINTEN BIT(27) +#define ERRCONFIG_MCUVALIDINTST BIT(26) +#define ERRCONFIG_MCUBOUNDINTEN BIT(25) +#define ERRCONFIG_MCUBOUNDINTST BIT(24) +#define ERRCONFIG_MCUDISACKINTEN BIT(23) +#define ERRCONFIG_VPBOUNDINTST_V2 BIT(23) +#define ERRCONFIG_MCUDISACKINTST BIT(22) +#define ERRCONFIG_VPBOUNDINTEN_V2 BIT(22) + +#define ERRCONFIG_STATUS_V1_MASK (ERRCONFIG_VPBOUNDINTST_V1 | \ + ERRCONFIG_MCUACCUMINTST | \ + ERRCONFIG_MCUVALIDINTST | \ + ERRCONFIG_MCUBOUNDINTST | \ + ERRCONFIG_MCUDISACKINTST) +/* IRQSTATUS */ +#define IRQSTATUS_MCUACCUMINT BIT(3) +#define IRQSTATUS_MCVALIDINT BIT(2) +#define IRQSTATUS_MCBOUNDSINT BIT(1) +#define IRQSTATUS_MCUDISABLEACKINT BIT(0) + +/* IRQENABLE_SET and IRQENABLE_CLEAR */ +#define IRQENABLE_MCUACCUMINT BIT(3) +#define IRQENABLE_MCUVALIDINT BIT(2) +#define IRQENABLE_MCUBOUNDSINT BIT(1) +#define IRQENABLE_MCUDISABLEACKINT BIT(0) + +/* Common Bit values */ + +#define SRCLKLENGTH_12MHZ_SYSCLK 0x3c +#define SRCLKLENGTH_13MHZ_SYSCLK 0x41 +#define SRCLKLENGTH_19MHZ_SYSCLK 0x60 +#define SRCLKLENGTH_26MHZ_SYSCLK 0x82 +#define SRCLKLENGTH_38MHZ_SYSCLK 0xC0 + +/* + * 3430 specific values. Maybe these should be passed from board file or + * pmic structures. + */ +#define OMAP3430_SR_ACCUMDATA 0x1f4 + +#define OMAP3430_SR1_SENPAVGWEIGHT 0x03 +#define OMAP3430_SR1_SENNAVGWEIGHT 0x03 + +#define OMAP3430_SR2_SENPAVGWEIGHT 0x01 +#define OMAP3430_SR2_SENNAVGWEIGHT 0x01 + +#define OMAP3430_SR_ERRWEIGHT 0x04 +#define OMAP3430_SR_ERRMAXLIMIT 0x02 + +/** + * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass + * pmic specific info to smartreflex driver + * + * @sr_pmic_init: API to initialize smartreflex on the PMIC side. + */ +struct omap_sr_pmic_data { + void (*sr_pmic_init) (void); +}; + +/** + * struct omap_smartreflex_dev_attr - Smartreflex Device attribute. + * + * @sensor_voltdm_name: Name of voltdomain of SR instance + */ +struct omap_smartreflex_dev_attr { + const char *sensor_voltdm_name; +}; + +#ifdef CONFIG_OMAP_SMARTREFLEX +/* + * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR. + * The smartreflex class driver should pass the class type. + * Should be used to populate the class_type field of the + * omap_smartreflex_class_data structure. + */ +#define SR_CLASS1 0x1 +#define SR_CLASS2 0x2 +#define SR_CLASS3 0x3 + +/** + * struct omap_sr_class_data - Smartreflex class driver info + * + * @enable: API to enable a particular class smaartreflex. + * @disable: API to disable a particular class smartreflex. + * @configure: API to configure a particular class smartreflex. + * @notify: API to notify the class driver about an event in SR. + * Not needed for class3. + * @notify_flags: specify the events to be notified to the class driver + * @class_type: specify which smartreflex class. + * Can be used by the SR driver to take any class + * based decisions. + */ +struct omap_sr_class_data { + int (*enable)(struct voltagedomain *voltdm); + int (*disable)(struct voltagedomain *voltdm, int is_volt_reset); + int (*configure)(struct voltagedomain *voltdm); + int (*notify)(struct voltagedomain *voltdm, u32 status); + u8 notify_flags; + u8 class_type; +}; + +/** + * struct omap_sr_nvalue_table - Smartreflex n-target value info + * + * @efuse_offs: The offset of the efuse where n-target values are stored. + * @nvalue: The n-target value. + */ +struct omap_sr_nvalue_table { + u32 efuse_offs; + u32 nvalue; +}; + +/** + * struct omap_sr_data - Smartreflex platform data. + * + * @ip_type: Smartreflex IP type. + * @senp_mod: SENPENABLE value for the sr + * @senn_mod: SENNENABLE value for sr + * @nvalue_count: Number of distinct nvalues in the nvalue table + * @enable_on_init: whether this sr module needs to enabled at + * boot up or not. + * @nvalue_table: table containing the efuse offsets and nvalues + * corresponding to them. + * @voltdm: Pointer to the voltage domain associated with the SR + */ +struct omap_sr_data { + int ip_type; + u32 senp_mod; + u32 senn_mod; + int nvalue_count; + bool enable_on_init; + struct omap_sr_nvalue_table *nvalue_table; + struct voltagedomain *voltdm; +}; + +/* Smartreflex module enable/disable interface */ +void omap_sr_enable(struct voltagedomain *voltdm); +void omap_sr_disable(struct voltagedomain *voltdm); +void omap_sr_disable_reset_volt(struct voltagedomain *voltdm); + +/* API to register the pmic specific data with the smartreflex driver. */ +void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data); + +/* Smartreflex driver hooks to be called from Smartreflex class driver */ +int sr_enable(struct voltagedomain *voltdm, unsigned long volt); +void sr_disable(struct voltagedomain *voltdm); +int sr_configure_errgen(struct voltagedomain *voltdm); +int sr_disable_errgen(struct voltagedomain *voltdm); +int sr_configure_minmax(struct voltagedomain *voltdm); + +/* API to register the smartreflex class driver with the smartreflex driver */ +int sr_register_class(struct omap_sr_class_data *class_data); +#else +static inline void omap_sr_enable(struct voltagedomain *voltdm) {} +static inline void omap_sr_disable(struct voltagedomain *voltdm) {} +static inline void omap_sr_disable_reset_volt( + struct voltagedomain *voltdm) {} +static inline void omap_sr_register_pmic( + struct omap_sr_pmic_data *pmic_data) {} +#endif +#endif -- cgit v1.2.3 From 80821c9c90427dd0f9274a82f9d69e43300d10bb Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Tue, 24 Apr 2012 10:22:12 +0530 Subject: ARM: OMAP3+: SmartReflex: class drivers should use struct omap_sr * Convert SmartReflex "class" functions to take a struct omap_sr *, rather than a struct voltagedomain *. SmartReflex code should be driver code and not tightly coupled to OMAP subarchitecture-specific structures. Based on Paul's original code for the SmartReflex driver conversion. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) (limited to 'include/linux/power/smartreflex.h') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 69eb270c6297..4224698cf8bd 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -143,6 +143,29 @@ #define OMAP3430_SR_ERRWEIGHT 0x04 #define OMAP3430_SR_ERRMAXLIMIT 0x02 +struct omap_sr { + struct list_head node; + struct platform_device *pdev; + struct omap_sr_nvalue_table *nvalue_table; + struct voltagedomain *voltdm; + struct dentry *dbg_dir; + unsigned int irq; + int srid; + int ip_type; + int nvalue_count; + bool autocomp_active; + u32 clk_length; + u32 err_weight; + u32 err_minlimit; + u32 err_maxlimit; + u32 accum_data; + u32 senn_avgweight; + u32 senp_avgweight; + u32 senp_mod; + u32 senn_mod; + void __iomem *base; +}; + /** * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass * pmic specific info to smartreflex driver @@ -187,10 +210,10 @@ struct omap_smartreflex_dev_attr { * based decisions. */ struct omap_sr_class_data { - int (*enable)(struct voltagedomain *voltdm); - int (*disable)(struct voltagedomain *voltdm, int is_volt_reset); - int (*configure)(struct voltagedomain *voltdm); - int (*notify)(struct voltagedomain *voltdm, u32 status); + int (*enable)(struct omap_sr *sr); + int (*disable)(struct omap_sr *sr, int is_volt_reset); + int (*configure)(struct omap_sr *sr); + int (*notify)(struct omap_sr *sr, u32 status); u8 notify_flags; u8 class_type; }; -- cgit v1.2.3 From 8b765d727d711650ab3521411fd48a0d8f62a84c Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Tue, 24 Apr 2012 10:41:27 +0530 Subject: ARM: OMAP2+: smartreflex: Use the names from hwmod data instead of voltage domains. Associate a name with each SmartReflex instance from the hwmod data, rather than attempting to reuse the name of a voltage domain. The name from hwmod better reflects the smartreflex integration in the system. Also have the name passed to the drivers using pdata, which helps to remove any dependencies on SoC-specific structures. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/power/smartreflex.h') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 4224698cf8bd..884eaeea96be 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -144,6 +144,7 @@ #define OMAP3430_SR_ERRMAXLIMIT 0x02 struct omap_sr { + char *name; struct list_head node; struct platform_device *pdev; struct omap_sr_nvalue_table *nvalue_table; @@ -232,6 +233,7 @@ struct omap_sr_nvalue_table { /** * struct omap_sr_data - Smartreflex platform data. * + * @name: instance name * @ip_type: Smartreflex IP type. * @senp_mod: SENPENABLE value for the sr * @senn_mod: SENNENABLE value for sr @@ -243,6 +245,7 @@ struct omap_sr_nvalue_table { * @voltdm: Pointer to the voltage domain associated with the SR */ struct omap_sr_data { + const char *name; int ip_type; u32 senp_mod; u32 senn_mod; -- cgit v1.2.3 From 50e4a7d0b26c86628300edf4625cc5ff16a7a227 Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Tue, 24 Apr 2012 10:56:40 +0530 Subject: ARM: OMAP2+: SmartReflex: introduce a busy loop condition test macro Now that omap_test_timeout is only accessible from mach-omap2/, introduce a similar function for SR. This change makes the SmartReflex implementation ready for the move to drivers/. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'include/linux/power/smartreflex.h') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 884eaeea96be..78b795ea2709 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -22,7 +22,7 @@ #include #include - +#include #include /* @@ -167,6 +167,27 @@ struct omap_sr { void __iomem *base; }; +/** + * test_cond_timeout - busy-loop, testing a condition + * @cond: condition to test until it evaluates to true + * @timeout: maximum number of microseconds in the timeout + * @index: loop index (integer) + * + * Loop waiting for @cond to become true or until at least @timeout + * microseconds have passed. To use, define some integer @index in the + * calling code. After running, if @index == @timeout, then the loop has + * timed out. + * + * Copied from omap_test_timeout */ +#define sr_test_cond_timeout(cond, timeout, index) \ +({ \ + for (index = 0; index < timeout; index++) { \ + if (cond) \ + break; \ + udelay(1); \ + } \ +}) + /** * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass * pmic specific info to smartreflex driver -- cgit v1.2.3 From 5e7f2e12e4ea14a34fb9b5941d60a4464fc8d40a Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Wed, 25 Apr 2012 11:19:44 +0530 Subject: ARM: OMAP2+: SmartReflex: Use per-OPP data structure The SmartReflex driver incorrectly treats some per-OPP data as data common to all OPPs (e.g., ERRMINLIMIT). Move this data into a per-OPP data structure. Furthermore, in order to make the SmartReflex implementation ready for the move to drivers/, remove the dependency from the SR driver code to the voltage layer by querying the data tables only from the SR device init code. Based on Paul's original code for the SmartReflex driver conversion. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux/power/smartreflex.h') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 78b795ea2709..222f90183712 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -243,12 +243,16 @@ struct omap_sr_class_data { /** * struct omap_sr_nvalue_table - Smartreflex n-target value info * - * @efuse_offs: The offset of the efuse where n-target values are stored. - * @nvalue: The n-target value. + * @efuse_offs: The offset of the efuse where n-target values are stored. + * @nvalue: The n-target value. + * @errminlimit: The value of the ERRMINLIMIT bitfield for this n-target + * @volt_nominal: microvolts DC that the VDD is initially programmed to */ struct omap_sr_nvalue_table { u32 efuse_offs; u32 nvalue; + u32 errminlimit; + unsigned long volt_nominal; }; /** -- cgit v1.2.3 From 7fb149ffe357d6ad672cf9325181530b4c478a81 Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Tue, 24 Apr 2012 11:38:50 +0530 Subject: ARM: OMAP2+: SmartReflex: add POWER_AVS Kconfig options Add a Kconfig menu (POWER_AVS) and rename the Kconfig options for the OMAP SmartReflex implementation: CONFIG_OMAP_SMARTREFLEX renames to CONFIG_POWER_AVS_OMAP CONFIG_OMAP_SMARTREFLEX_CLASS3 renames to CONFIG_POWER_AVS_OMAP_CLASS3 This change makes the SmartReflex implementation ready for the move to drivers/. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/power/smartreflex.h') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 222f90183712..3101e62a1213 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -207,7 +207,7 @@ struct omap_smartreflex_dev_attr { const char *sensor_voltdm_name; }; -#ifdef CONFIG_OMAP_SMARTREFLEX +#ifdef CONFIG_POWER_AVS_OMAP /* * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR. * The smartreflex class driver should pass the class type. -- cgit v1.2.3