From fffe5d5aa05b4e69f79bc75a51c5ee0fc6203fa5 Mon Sep 17 00:00:00 2001 From: Qiang Liu Date: Tue, 8 Nov 2011 08:43:08 -0500 Subject: mmc: sd: Macro name cleanup for high speed dtr Add new macros for the high speed 50MHz case, rather than having a confusing reuse of the value for UHS SDR50, which is 100MHz. Reported-by: Aaron Lu Signed-off-by: Chris Ball --- include/linux/mmc/card.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index c8ef9bc54d50..2c9be29684cf 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -110,6 +110,7 @@ struct sd_ssr { struct sd_switch_caps { unsigned int hs_max_dtr; unsigned int uhs_max_dtr; +#define HIGH_SPEED_MAX_DTR 50000000 #define UHS_SDR104_MAX_DTR 208000000 #define UHS_SDR50_MAX_DTR 100000000 #define UHS_DDR50_MAX_DTR 50000000 @@ -117,11 +118,13 @@ struct sd_switch_caps { #define UHS_SDR12_MAX_DTR 25000000 unsigned int sd3_bus_mode; #define UHS_SDR12_BUS_SPEED 0 +#define HIGH_SPEED_BUS_SPEED 1 #define UHS_SDR25_BUS_SPEED 1 #define UHS_SDR50_BUS_SPEED 2 #define UHS_SDR104_BUS_SPEED 3 #define UHS_DDR50_BUS_SPEED 4 +#define SD_MODE_HIGH_SPEED (1 << HIGH_SPEED_BUS_SPEED) #define SD_MODE_UHS_SDR12 (1 << UHS_SDR12_BUS_SPEED) #define SD_MODE_UHS_SDR25 (1 << UHS_SDR25_BUS_SPEED) #define SD_MODE_UHS_SDR50 (1 << UHS_SDR50_BUS_SPEED) -- cgit v1.2.3 From df16219f365f7f5a2d88a6e123251d57255cca3f Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Fri, 4 Nov 2011 13:53:19 +0100 Subject: mmc: debugfs: expose the SDCLK frq in sys ios This patch is to expose the actual SDCLK frequency in /sys/kernel/debug/mmcX/ios entry. For example, if the max clk for a normal speed card is 20MHz this is reported in /sys/kernel/debug/mmcX/ios. Unfortunately the actual SDCLK frequency (i.e. Baseclock / divisor) is not reported at all: for example, in that case, on Arasan HC, it should be 48/4=12 (MHz). Signed-off-by: Giuseppe Cavallaro Acked-by: Adrian Hunter Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index a3ac9c48e5de..cea064f73514 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -323,6 +323,8 @@ struct mmc_host { struct fault_attr fail_mmc_request; #endif + unsigned int actual_clock; /* Actual HC clock rate */ + unsigned long private[0] ____cacheline_aligned; }; -- cgit v1.2.3 From 597dd9d79cfbbb1636d00a7fd0880355d9b20c41 Mon Sep 17 00:00:00 2001 From: Sujit Reddy Thumma Date: Mon, 14 Nov 2011 13:53:29 +0530 Subject: mmc: core: Use delayed work in clock gating framework Current clock gating framework disables the MCI clock as soon as the request is completed and enables it when a request arrives. This aggressive clock gating framework, when enabled, cause following issues: When there are back-to-back requests from the Queue layer, we unnecessarily end up disabling and enabling the clocks between these requests since 8MCLK clock cycles is a very short duration compared to the time delay between back to back requests reaching the MMC layer. This overhead can effect the overall performance depending on how long the clock enable and disable calls take which is platform dependent. For example on some platforms we can have clock control not on the local processor, but on a different subsystem and the time taken to perform the clock enable/disable can add significant overhead. Also if the host controller driver decides to disable the host clock too when mmc_set_ios function is called with ios.clock=0, it adds additional delay and it is highly possible that the next request had already arrived and unnecessarily blocked in enabling the clocks. This is seen frequently when the processor is executing at high speeds and in multi-core platforms thus reduces the overall throughput compared to if clock gating is disabled. Fix this by delaying turning off the clocks by posting request on delayed workqueue. Also cancel the unscheduled pending work, if any, when there is access to card. sysfs entry is provided to tune the delay as needed, default value set to 200ms. Signed-off-by: Sujit Reddy Thumma Acked-by: Linus Walleij Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index cea064f73514..706f72279a17 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -253,10 +253,12 @@ struct mmc_host { int clk_requests; /* internal reference counter */ unsigned int clk_delay; /* number of MCI clk hold cycles */ bool clk_gated; /* clock gated */ - struct work_struct clk_gate_work; /* delayed clock gate */ + struct delayed_work clk_gate_work; /* delayed clock gate */ unsigned int clk_old; /* old clock value cache */ spinlock_t clk_lock; /* lock for clk fields */ struct mutex clk_gate_mutex; /* mutex for clock gating */ + struct device_attribute clkgate_delay_attr; + unsigned long clkgate_delay; #endif /* host specific block data */ -- cgit v1.2.3 From a303c5319c8e6ab0e744ebca118da8420043b2c3 Mon Sep 17 00:00:00 2001 From: Philip Rakity Date: Mon, 14 Nov 2011 19:14:38 -0800 Subject: mmc: sdio: support SDIO UHS cards This patch adds support for sdio UHS cards per the version 3.0 spec. UHS mode is only enabled for version 3.0 cards when both the host and the controller support UHS modes. 1.8v signaling support is removed if both the card and the host do not support UHS. This is done to maintain compatibility and some system/card combinations break when 1.8v signaling is enabled when the host does not support UHS. Signed-off-by: Philip Rakity Signed-off-by: Aaron Lu Reviewed-by: Arindam Nath Tested-by: Bing Zhao Signed-off-by: Chris Ball --- include/linux/mmc/card.h | 4 +++- include/linux/mmc/sdio.h | 29 +++++++++++++++++++++++++++-- 2 files changed, 30 insertions(+), 3 deletions(-) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 2c9be29684cf..534974c3ef0c 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -367,7 +367,8 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED) #define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR) #define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR) -#define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) +#define mmc_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) +#define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) @@ -375,6 +376,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED) #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) #define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR) +#define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC) diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h index e0b1123497b9..c9fe66c58f8f 100644 --- a/include/linux/mmc/sdio.h +++ b/include/linux/mmc/sdio.h @@ -38,6 +38,7 @@ * [8:0] Byte/block count */ +#define R4_18V_PRESENT (1<<24) #define R4_MEMORY_PRESENT (1 << 27) /* @@ -85,6 +86,7 @@ #define SDIO_SD_REV_1_01 0 /* SD Physical Spec Version 1.01 */ #define SDIO_SD_REV_1_10 1 /* SD Physical Spec Version 1.10 */ #define SDIO_SD_REV_2_00 2 /* SD Physical Spec Version 2.00 */ +#define SDIO_SD_REV_3_00 3 /* SD Physical Spev Version 3.00 */ #define SDIO_CCCR_IOEx 0x02 #define SDIO_CCCR_IORx 0x03 @@ -134,8 +136,31 @@ #define SDIO_CCCR_SPEED 0x13 #define SDIO_SPEED_SHS 0x01 /* Supports High-Speed mode */ -#define SDIO_SPEED_EHS 0x02 /* Enable High-Speed mode */ - +#define SDIO_SPEED_BSS_SHIFT 1 +#define SDIO_SPEED_BSS_MASK (7< Date: Mon, 28 Nov 2011 16:22:00 +0200 Subject: mmc: allow upper layers to know immediately if card has been removed Add a function mmc_detect_card_removed() which upper layers can use to determine immediately if a card has been removed. This function should be called after an I/O request fails so that all queued I/O requests can be errored out immediately instead of waiting for the card device to be removed. Signed-off-by: Adrian Hunter Acked-by: Sujit Reddy Thumma Signed-off-by: Chris Ball --- include/linux/mmc/card.h | 3 +++ include/linux/mmc/core.h | 2 ++ include/linux/mmc/host.h | 1 + 3 files changed, 6 insertions(+) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 534974c3ef0c..6402d9224d6a 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -209,6 +209,7 @@ struct mmc_card { #define MMC_STATE_HIGHSPEED_DDR (1<<4) /* card is in high speed mode */ #define MMC_STATE_ULTRAHIGHSPEED (1<<5) /* card is in ultra high speed mode */ #define MMC_CARD_SDXC (1<<6) /* card is SDXC */ +#define MMC_CARD_REMOVED (1<<7) /* card has been removed */ unsigned int quirks; /* card quirks */ #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ @@ -370,6 +371,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) #define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC) +#define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED)) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) @@ -379,6 +381,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC) +#define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED) /* * Quirk add/remove for MMC products. diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 174a844a5dda..87a976cc5654 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -180,6 +180,8 @@ extern int mmc_try_claim_host(struct mmc_host *host); extern int mmc_flush_cache(struct mmc_card *); +extern int mmc_detect_card_removed(struct mmc_host *host); + /** * mmc_claim_host - exclusively claim a host * @host: mmc host to claim diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 706f72279a17..9a03d0335745 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -299,6 +299,7 @@ struct mmc_host { int claim_cnt; /* "claim" nesting count */ struct delayed_work detect; + int detect_change; /* card detect flag */ const struct mmc_bus_ops *bus_ops; /* current bus driver */ unsigned int bus_refs; /* reference counter */ -- cgit v1.2.3 From add710eaa88606de8ba98a014d37178579e6dbaf Mon Sep 17 00:00:00 2001 From: Johan Rudholm Date: Fri, 2 Dec 2011 08:51:06 +0100 Subject: mmc: boot partition ro lock support Enable boot partitions to be read-only locked until next power on via a sysfs entry. There will be one sysfs entry for each boot partition: /sys/block/mmcblkXbootY/ro_lock_until_next_power_on Each boot partition is locked by writing 1 to its file. Signed-off-by: Johan Rudholm Signed-off-by: John Beckett Signed-off-by: Chris Ball --- include/linux/mmc/card.h | 10 +++++++++- include/linux/mmc/mmc.h | 6 ++++++ 2 files changed, 15 insertions(+), 1 deletion(-) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 6402d9224d6a..9478a6bf1bb1 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -71,6 +71,8 @@ struct mmc_ext_csd { bool hpi_en; /* HPI enablebit */ bool hpi; /* HPI support bit */ unsigned int hpi_cmd; /* cmd used as HPI */ + unsigned int boot_ro_lock; /* ro lock support */ + bool boot_ro_lockable; u8 raw_partition_support; /* 160 */ u8 raw_erased_mem_count; /* 181 */ u8 raw_ext_csd_structure; /* 194 */ @@ -187,6 +189,10 @@ struct mmc_part { unsigned int part_cfg; /* partition type */ char name[MAX_MMC_PART_NAME_LEN]; bool force_ro; /* to make boot parts RO by default */ + unsigned int area_type; +#define MMC_BLK_DATA_AREA_MAIN (1<<0) +#define MMC_BLK_DATA_AREA_BOOT (1<<1) +#define MMC_BLK_DATA_AREA_GP (1<<2) }; /* @@ -265,12 +271,14 @@ struct mmc_card { * This function fill contents in mmc_part. */ static inline void mmc_part_add(struct mmc_card *card, unsigned int size, - unsigned int part_cfg, char *name, int idx, bool ro) + unsigned int part_cfg, char *name, int idx, bool ro, + int area_type) { card->part[card->nr_parts].size = size; card->part[card->nr_parts].part_cfg = part_cfg; sprintf(card->part[card->nr_parts].name, name, idx); card->part[card->nr_parts].force_ro = ro; + card->part[card->nr_parts].area_type = area_type; card->nr_parts++; } diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 0e7135697d11..665548e639e8 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -280,6 +280,7 @@ struct _mmc_csd { #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ #define EXT_CSD_SANITIZE_START 165 /* W */ #define EXT_CSD_WR_REL_PARAM 166 /* RO */ +#define EXT_CSD_BOOT_WP 173 /* R/W */ #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ #define EXT_CSD_PART_CONFIG 179 /* R/W */ #define EXT_CSD_ERASED_MEM_CONT 181 /* RO */ @@ -321,6 +322,11 @@ struct _mmc_csd { #define EXT_CSD_WR_REL_PARAM_EN (1<<2) +#define EXT_CSD_BOOT_WP_B_PWR_WP_DIS (0x40) +#define EXT_CSD_BOOT_WP_B_PERM_WP_DIS (0x10) +#define EXT_CSD_BOOT_WP_B_PERM_WP_EN (0x04) +#define EXT_CSD_BOOT_WP_B_PWR_WP_EN (0x01) + #define EXT_CSD_PART_CONFIG_ACC_MASK (0x7) #define EXT_CSD_PART_CONFIG_ACC_BOOT0 (0x1) #define EXT_CSD_PART_CONFIG_ACC_GP0 (0x4) -- cgit v1.2.3 From 4f408cc67a0613f969d1e02fff6de74d31a29fb3 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Fri, 9 Dec 2011 14:55:52 +0900 Subject: mmc: dw_mmc: Add more capabilities field This patch adds another capabilities field for MMC_CAPS2_XXX. Signed-off-by: Seungwon Jeon Signed-off-by: Chris Ball --- include/linux/mmc/dw_mmc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index 6dc9b80568a0..e8779c6d1759 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -214,6 +214,7 @@ struct dw_mci_board { unsigned int bus_hz; /* Bus speed */ unsigned int caps; /* Capabilities */ + unsigned int caps2; /* More capabilities */ /* * Override fifo depth. If 0, autodetect it from the FIFOTH register, * but note that this may not be reliable after a bootloader has used -- cgit v1.2.3 From b67e198073b2d2f16572f5fa77553fec14775f69 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Sun, 25 Dec 2011 20:40:03 -0500 Subject: mmc: add a card hotplug handler context SD/MMC controllers provide different card insertion and removal detection methods. On some of them the controller itself issues an interrupt, on others polling is used, on yet others auxiliary means are used for this purpose, e.g., a GPIO IRQ. Further, on some systems one of those methods can be chosen at driver probing time and configured in software. E.g., on some systems the SD/MMC controller card hot-plug detection pin can be configured either as a respective controller functions, or an IRQ-capable GPIO. To support such flexible configurations a card hot-plug context is added by this patch. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 9a03d0335745..742f0e102e1e 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -167,6 +167,11 @@ struct mmc_async_req { int (*err_check) (struct mmc_card *, struct mmc_async_req *); }; +struct mmc_hotplug { + unsigned int irq; + void *handler_priv; +}; + struct mmc_host { struct device *parent; struct device class_dev; @@ -300,6 +305,7 @@ struct mmc_host { struct delayed_work detect; int detect_change; /* card detect flag */ + struct mmc_hotplug hotplug; const struct mmc_bus_ops *bus_ops; /* current bus driver */ unsigned int bus_refs; /* reference counter */ -- cgit v1.2.3 From 349ab52446772a359bc7e7699cae3880d48fa5c9 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Sun, 25 Dec 2011 21:36:02 +0100 Subject: mmc: add a generic GPIO card-detect helper This patch adds a primitive helper to support card hotplug detection on platforms, where a GPIO, capable of producing interrupts, is used for detection of card-insertion and -removal events. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- include/linux/mmc/cd-gpio.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 include/linux/mmc/cd-gpio.h (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/cd-gpio.h b/include/linux/mmc/cd-gpio.h new file mode 100644 index 000000000000..a8e469783318 --- /dev/null +++ b/include/linux/mmc/cd-gpio.h @@ -0,0 +1,19 @@ +/* + * Generic GPIO card-detect helper header + * + * Copyright (C) 2011, Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MMC_CD_GPIO_H +#define MMC_CD_GPIO_H + +struct mmc_host; +int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio, + unsigned int irq, unsigned long flags); +void mmc_cd_gpio_free(struct mmc_host *host); + +#endif -- cgit v1.2.3 From 52c506f0bc72530fb786838e7ffd4f158a2e5c3a Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 27 Dec 2011 15:48:43 +0200 Subject: mmc: sdhci-pci: add platform data Add a means of getting platform data for the SDHCI PCI devices. The data is stored against the slot not the device in order to support multi-slot devices. The data allows platform-specific setup (such as getting GPIO numbers from firmware or setting up wl12xx for SDIO) to be done in platform support files instead of the sdhci-pci driver. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- include/linux/mmc/sdhci-pci-data.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 include/linux/mmc/sdhci-pci-data.h (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/sdhci-pci-data.h b/include/linux/mmc/sdhci-pci-data.h new file mode 100644 index 000000000000..8959604a13d3 --- /dev/null +++ b/include/linux/mmc/sdhci-pci-data.h @@ -0,0 +1,18 @@ +#ifndef LINUX_MMC_SDHCI_PCI_DATA_H +#define LINUX_MMC_SDHCI_PCI_DATA_H + +struct pci_dev; + +struct sdhci_pci_data { + struct pci_dev *pdev; + int slotno; + int rst_n_gpio; /* Set to -EINVAL if unused */ + int cd_gpio; /* Set to -EINVAL if unused */ + int (*setup)(struct sdhci_pci_data *data); + void (*cleanup)(struct sdhci_pci_data *data); +}; + +extern struct sdhci_pci_data *(*sdhci_pci_get_data)(struct pci_dev *pdev, + int slotno); + +#endif -- cgit v1.2.3 From e2a0a5829c4069ee4a0f28c7301187ffaba91a46 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 27 Dec 2011 15:48:45 +0200 Subject: mmc: sdhci-pci: remove SDHCI_QUIRK2_OWN_CARD_DETECTION Even if a driver provides separate card detection, an interrupt is still needed to abort mmc requests that are in progress. SDHCI_QUIRK2_OWN_CARD_DETECTION prevents that, so remove it. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- include/linux/mmc/sdhci.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index e4b69353678d..dad7a469f09c 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -90,8 +90,6 @@ struct sdhci_host { unsigned int quirks2; /* More deviations from spec. */ -#define SDHCI_QUIRK2_OWN_CARD_DETECTION (1<<0) - int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ -- cgit v1.2.3 From aa9df4fb2adcc73d36fa41e23059519be770aaa5 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 19 Dec 2011 16:24:19 +0100 Subject: mmc: core: Add option to prevent eMMC sleep command Host may now use MMC_CAP2_NO_SLEEP_CMD to disable the use of eMMC sleep/awake command. This option can be used when your platform has a buggy kernel crash dump software, which is supposed to store the dump on the eMMC, but is not able to wake up the eMMC from sleep state. In particular, failures have been seen with u-boot; even if it is fixed there, platforms will be slow to update their bootloader binaries. Signed-off-by: Ulf Hansson Reviewed-by: Hanumath Prasad Reviewed-by: Srinidhi Kasagar Acked-by: Subhash Jadavani Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 742f0e102e1e..031d865167a2 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -247,6 +247,7 @@ struct mmc_host { #define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */ #define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff supported */ #define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads don't work */ +#define MMC_CAP2_NO_SLEEP_CMD (1 << 4) /* Don't allow sleep command */ mmc_pm_flag_t pm_caps; /* supported pm features */ unsigned int power_notify_type; -- cgit v1.2.3 From a4924c71aa43d4f8a3f342b1f71788349472e684 Mon Sep 17 00:00:00 2001 From: Girish K S Date: Wed, 11 Jan 2012 14:04:52 -0500 Subject: mmc: core: HS200 mode support for eMMC 4.5 This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S Signed-off-by: Philip Rakity Signed-off-by: Chris Ball --- include/linux/mmc/card.h | 3 +++ include/linux/mmc/host.h | 11 +++++++- include/linux/mmc/mmc.h | 66 +++++++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 78 insertions(+), 2 deletions(-) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 9478a6bf1bb1..9f22ba572de0 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -216,6 +216,7 @@ struct mmc_card { #define MMC_STATE_ULTRAHIGHSPEED (1<<5) /* card is in ultra high speed mode */ #define MMC_CARD_SDXC (1<<6) /* card is SDXC */ #define MMC_CARD_REMOVED (1<<7) /* card has been removed */ +#define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */ unsigned int quirks; /* card quirks */ #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ @@ -374,6 +375,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT) #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY) #define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED) +#define mmc_card_hs200(c) ((c)->state & MMC_STATE_HIGHSPEED_200) #define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR) #define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR) #define mmc_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) @@ -384,6 +386,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED) +#define mmc_card_set_hs200(c) ((c)->state |= MMC_STATE_HIGHSPEED_200) #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) #define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR) #define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 031d865167a2..dd13e0539092 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -56,10 +56,13 @@ struct mmc_ios { #define MMC_TIMING_UHS_SDR50 3 #define MMC_TIMING_UHS_SDR104 4 #define MMC_TIMING_UHS_DDR50 5 +#define MMC_TIMING_MMC_HS200 6 #define MMC_SDR_MODE 0 #define MMC_1_2V_DDR_MODE 1 #define MMC_1_8V_DDR_MODE 2 +#define MMC_1_2V_SDR_MODE 3 +#define MMC_1_8V_SDR_MODE 4 unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */ @@ -148,7 +151,9 @@ struct mmc_host_ops { void (*init_card)(struct mmc_host *host, struct mmc_card *card); int (*start_signal_voltage_switch)(struct mmc_host *host, struct mmc_ios *ios); - int (*execute_tuning)(struct mmc_host *host); + + /* The tuning command opcode value is different for SD and eMMC cards */ + int (*execute_tuning)(struct mmc_host *host, u32 opcode); void (*enable_preset_value)(struct mmc_host *host, bool enable); int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv); void (*hw_reset)(struct mmc_host *host); @@ -248,6 +253,10 @@ struct mmc_host { #define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff supported */ #define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads don't work */ #define MMC_CAP2_NO_SLEEP_CMD (1 << 4) /* Don't allow sleep command */ +#define MMC_CAP2_HS200_1_8V_SDR (1 << 5) /* can support */ +#define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */ +#define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \ + MMC_CAP2_HS200_1_2V_SDR) mmc_pm_flag_t pm_caps; /* supported pm features */ unsigned int power_notify_type; diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 665548e639e8..fb9f6e116e1c 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -51,6 +51,7 @@ #define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */ #define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */ #define MMC_SEND_TUNING_BLOCK 19 /* adtc R1 */ +#define MMC_SEND_TUNING_BLOCK_HS200 21 /* adtc R1 */ /* class 3 */ #define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */ @@ -339,13 +340,76 @@ struct _mmc_csd { #define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */ #define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */ -#define EXT_CSD_CARD_TYPE_MASK 0xF /* Mask out reserved bits */ +#define EXT_CSD_CARD_TYPE_MASK 0x3F /* Mask out reserved bits */ #define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */ /* DDR mode @1.8V or 3V I/O */ #define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */ /* DDR mode @1.2V I/O */ #define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ | EXT_CSD_CARD_TYPE_DDR_1_2V) +#define EXT_CSD_CARD_TYPE_SDR_1_8V (1<<4) /* Card can run at 200MHz */ +#define EXT_CSD_CARD_TYPE_SDR_1_2V (1<<5) /* Card can run at 200MHz */ + /* SDR mode @1.2V I/O */ + +#define EXT_CSD_CARD_TYPE_SDR_200 (EXT_CSD_CARD_TYPE_SDR_1_8V | \ + EXT_CSD_CARD_TYPE_SDR_1_2V) + +#define EXT_CSD_CARD_TYPE_SDR_ALL (EXT_CSD_CARD_TYPE_SDR_200 | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_2V_ALL (EXT_CSD_CARD_TYPE_SDR_1_2V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_8V_ALL (EXT_CSD_CARD_TYPE_SDR_1_8V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_1_2V | \ + EXT_CSD_CARD_TYPE_DDR_1_8V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_1_8V | \ + EXT_CSD_CARD_TYPE_DDR_1_8V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_1_2V | \ + EXT_CSD_CARD_TYPE_DDR_1_2V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_1_8V | \ + EXT_CSD_CARD_TYPE_DDR_1_2V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52 (EXT_CSD_CARD_TYPE_SDR_1_2V | \ + EXT_CSD_CARD_TYPE_DDR_52 | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52 (EXT_CSD_CARD_TYPE_SDR_1_8V | \ + EXT_CSD_CARD_TYPE_DDR_52 | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_200 | \ + EXT_CSD_CARD_TYPE_DDR_1_8V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_200 | \ + EXT_CSD_CARD_TYPE_DDR_1_2V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52 (EXT_CSD_CARD_TYPE_SDR_200 | \ + EXT_CSD_CARD_TYPE_DDR_52 | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ -- cgit v1.2.3 From 069c9f142822d552ec885572945d8bce9eff0519 Mon Sep 17 00:00:00 2001 From: Girish K S Date: Fri, 6 Jan 2012 09:56:39 +0530 Subject: mmc: host: Adds support for eMMC 4.5 HS200 mode This patch adds support for the HS200 mode on the host side. Also enables the tuning feature required when the HS200 mode is selected. Signed-off-by: Girish K S Signed-off-by: Chris Ball --- include/linux/mmc/sdhci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index dad7a469f09c..c750f85177d9 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -119,6 +119,7 @@ struct sdhci_host { #define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ #define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ #define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ +#define SDHCI_HS200_NEEDS_TUNING (1<<10) /* HS200 needs tuning */ unsigned int version; /* SDHCI spec. version */ -- cgit v1.2.3 From 90ab5ee94171b3e28de6bb42ee30b527014e0be7 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 13 Jan 2012 09:32:20 +1030 Subject: module_param: make bool parameters really bool (drivers & misc) module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab Signed-off-by: Rusty Russell --- include/linux/mmc/host.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index a3ac9c48e5de..8ef7894a48d0 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -396,7 +396,7 @@ static inline void mmc_set_disable_delay(struct mmc_host *host, } /* Module parameter */ -extern int mmc_assume_removable; +extern bool mmc_assume_removable; static inline int mmc_card_is_removable(struct mmc_host *host) { -- cgit v1.2.3 From 2c4967f741e87cdd63de7271b97807041dccbf3b Mon Sep 17 00:00:00 2001 From: Sujit Reddy Thumma Date: Sat, 4 Feb 2012 16:14:50 -0500 Subject: mmc: core: Ensure clocks are always enabled before host interaction Ensure clocks are always enabled before any interaction with the host controller driver. This makes sure that there is no race between host execution and the core layer turning off clocks in different context with clock gating framework. Signed-off-by: Sujit Reddy Thumma Acked-by: Linus Walleij Acked-by: Per Forlin Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 0beba1e5e1ed..73e5ee8e9ca2 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -444,4 +444,23 @@ static inline int mmc_boot_partition_access(struct mmc_host *host) return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC); } +#ifdef CONFIG_MMC_CLKGATE +void mmc_host_clk_hold(struct mmc_host *host); +void mmc_host_clk_release(struct mmc_host *host); +unsigned int mmc_host_clk_rate(struct mmc_host *host); + +#else +static inline void mmc_host_clk_hold(struct mmc_host *host) +{ +} + +static inline void mmc_host_clk_release(struct mmc_host *host) +{ +} + +static inline unsigned int mmc_host_clk_rate(struct mmc_host *host) +{ + return host->ios.clock; +} +#endif #endif /* LINUX_MMC_HOST_H */ -- cgit v1.2.3 From 6e8201f57c9359c9c5dc8f9805c15a4392492a10 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Mon, 16 Jan 2012 17:49:01 +0900 Subject: mmc: core: add the capability for broken voltage There is an understood mismatch between the voltage the host controller is set to and the voltage supplied to the card by a fixed voltage regulator. Teaching the driver to accept the mismatch is overly complicated. Instead just accept the regulator's voltage. This patch adds MMC_CAP2_BROKEN_VOLTAGE. If the voltage didn't satisfy between min_uV and max_uV, try to change the voltage in core.c. When changing the voltage, maybe use regulator_set_voltage(). In regulator_set_voltage(), check the below condition. /* sanity check */ if (!rdev->desc->ops->set_voltage && !rdev->desc->ops->set_voltage_sel) { ret = -EINVAL; goto out; } If some board should use the fixed-regulator, always return -EINVAL. Then, eMMC didn't initialize always. So if use a fixed-regulator, we need to add the MMC_CAP2_BROKEN_VOLTAGE. Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Acked-by: Adrian Hunter Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 73e5ee8e9ca2..ee2b0363c040 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -257,6 +257,7 @@ struct mmc_host { #define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */ #define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \ MMC_CAP2_HS200_1_2V_SDR) +#define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */ mmc_pm_flag_t pm_caps; /* supported pm features */ unsigned int power_notify_type; -- cgit v1.2.3 From 3e73c36b4dc224529d0b0c0d5d69c0dacd793c42 Mon Sep 17 00:00:00 2001 From: Girish K S Date: Tue, 31 Jan 2012 15:44:03 +0530 Subject: mmc: core: Fix PowerOff Notify suspend/resume Modified the mmc_poweroff to resume before sending the poweroff notification command. In sleep mode only AWAKE and RESET commands are allowed, so before sending the poweroff notification command resume from sleep mode and then send the notification command. PowerOff Notify is tested on a Synopsis Designware Host Controller (eMMC 4.5). The suspend to RAM and resume works fine. Signed-off-by: Girish K S Tested-by: Girish K S Reviewed-by: Saugata Das Signed-off-by: Chris Ball --- include/linux/mmc/card.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 9f22ba572de0..19a41d1737af 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -217,6 +217,7 @@ struct mmc_card { #define MMC_CARD_SDXC (1<<6) /* card is SDXC */ #define MMC_CARD_REMOVED (1<<7) /* card has been removed */ #define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */ +#define MMC_STATE_SLEEP (1<<9) /* card is in sleep state */ unsigned int quirks; /* card quirks */ #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ @@ -382,6 +383,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC) #define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED)) +#define mmc_card_is_sleep(c) ((c)->state & MMC_STATE_SLEEP) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) @@ -393,7 +395,9 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC) #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED) +#define mmc_card_set_sleep(c) ((c)->state |= MMC_STATE_SLEEP) +#define mmc_card_clr_sleep(c) ((c)->state &= ~MMC_STATE_SLEEP) /* * Quirk add/remove for MMC products. */ -- cgit v1.2.3 From f9c2a0dc42a6938ff2a80e55ca2bbd1d5581c72e Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Thu, 9 Feb 2012 14:32:43 +0900 Subject: mmc: dw_mmc: Fix PIO mode with support of highmem Current PIO mode makes a kernel crash with CONFIG_HIGHMEM. Highmem pages have a NULL from sg_virt(sg). This patch fixes the following problem. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01423-gdbf465f #589) PC is at dw_mci_pull_data32+0x4c/0x9c LR is at dw_mci_read_data_pio+0x54/0x1f0 pc : [] lr : [] psr: 20000193 sp : c0619d48 ip : c0619d70 fp : c0619d6c r10: 00000000 r9 : 00000002 r8 : 00001000 r7 : 00000200 r6 : 00000000 r5 : e1dd3100 r4 : 00000000 r3 : 65622023 r2 : 0000007f r1 : eeb96000 r0 : e1dd3100 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment xkernel Control: 10c5387d Table: 61e2004a DAC: 00000015 Process swapper (pid: 0, stack limit = 0xc06182f0) Stack: (0xc0619d48 to 0xc061a000) 9d40: e1dd3100 e1a4f000 00000000 e1dd3100 e1a4f000 00000200 9d60: c0619da4 c0619d70 c035988c c03587e4 c0619d9c e18158f4 e1dd3100 e1dd3100 9d80: 00000020 00000000 00000000 00000020 c06e8a84 00000000 c0619e04 c0619da8 9da0: c0359b24 c0359844 e18158f4 e1dd3164 e1dd3168 e1dd3150 3d02fc79 e1dd3154 9dc0: e1dd3178 00000000 00000020 00000000 e1dd3150 00000000 c10dd7e8 e1a84900 9de0: c061e7cc 00000000 00000000 0000008d c06e8a84 c061e780 c0619e4c c0619e08 9e00: c00c4738 c0359a34 3d02fc79 00000000 c0619e4c c05a1698 c05a1670 c05a165c 9e20: c04de8b0 c061e780 c061e7cc e1a84900 ffffed68 0000008d c0618000 00000000 9e40: c0619e6c c0619e50 c00c48b4 c00c46c8 c061e780 c00423ac c061e7cc ffffed68 9e60: c0619e8c c0619e70 c00c7358 c00c487c 0000008d ffffee38 c0618000 ffffed68 9e80: c0619ea4 c0619e90 c00c4258 c00c72b0 c00423ac ffffee38 c0619ecc c0619ea8 9ea0: c004241c c00c4234 ffffffff f8810000 0000006d 00000002 00000001 7fffffff 9ec0: c0619f44 c0619ed0 c0048bc0 c00423c4 220ae7a9 00000000 386f0d30 0005d3a4 9ee0: c00423ac c10dd0b8 c06f2cd8 c0618000 c0594778 c003a674 7fffffff c0619f44 9f00: 386f0d30 c0619f18 c00a6f94 c005be3c 80000013 ffffffff 386f0d30 0005d3a4 9f20: 386f0d30 0005d2d1 c10dd0a8 c10dd0b8 c06f2cd8 c0618000 c0619f74 c0619f48 9f40: c0345858 c005be00 c00a2440 c0618000 c0618000 c00410d8 c06c1944 c00410fc 9f60: c0594778 c003a674 c0619f9c c0619f78 c004a7e8 c03457b4 c0618000 c06c18f8 9f80: 00000000 c0039c70 c06c18d4 c003a674 c0619fb4 c0619fa0 c04ceafc c004a714 9fa0: c06287b4 c06c18f8 c0619ff4 c0619fb8 c0008b68 c04cea68 c0008578 00000000 9fc0: 00000000 c003a674 00000000 10c5387d c0628658 c003aa78 c062f1c4 4000406a 9fe0: 413fc090 00000000 00000000 c0619ff8 40008044 c0008858 00000000 00000000 Backtrace: [] (dw_mci_pull_data32+0x0/0x9c) from [] (dw_mci_read_data_pio+0x54/0x1f0) r6:00000200 r5:e1a4f000 r4:e1dd3100 [] (dw_mci_read_data_pio+0x0/0x1f0) from [] (dw_mci_interrupt+0xfc/0x4a4) [] (dw_mci_interrupt+0x0/0x4a4) from [] (handle_irq_event_percpu+0x7c/0x1b4) [] (handle_irq_event_percpu+0x0/0x1b4) from [] (handle_irq_event+0x44/0x64) [] (handle_irq_event+0x0/0x64) from [] (handle_fasteoi_irq+0xb4/0x124) r7:ffffed68 r6:c061e7cc r5:c00423ac r4:c061e780 [] (handle_fasteoi_irq+0x0/0x124) from [] (generic_handle_irq+0x30/0x38) r7:ffffed68 r6:c0618000 r5:ffffee38 r4:0000008d [] (generic_handle_irq+0x0/0x38) from [] (asm_do_IRQ+0x64/0xe0) r5:ffffee38 r4:c00423ac [] (asm_do_IRQ+0x0/0xe0) from [] (__irq_svc+0x80/0x14c) Exception stack(0xc0619ed0 to 0xc0619f18) Signed-off-by: Seungwon Jeon Acked-by: Will Newton Cc: stable Signed-off-by: Chris Ball --- include/linux/mmc/dw_mmc.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index e8779c6d1759..aae5d1f1bb39 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -14,6 +14,8 @@ #ifndef LINUX_MMC_DW_MMC_H #define LINUX_MMC_DW_MMC_H +#include + #define MAX_MCI_SLOTS 2 enum dw_mci_state { @@ -40,7 +42,7 @@ struct mmc_data; * @lock: Spinlock protecting the queue and associated data. * @regs: Pointer to MMIO registers. * @sg: Scatterlist entry currently being processed by PIO code, if any. - * @pio_offset: Offset into the current scatterlist entry. + * @sg_miter: PIO mapping scatterlist iterator. * @cur_slot: The slot which is currently using the controller. * @mrq: The request currently being processed on @cur_slot, * or NULL if the controller is idle. @@ -115,7 +117,7 @@ struct dw_mci { void __iomem *regs; struct scatterlist *sg; - unsigned int pio_offset; + struct sg_mapping_iter sg_miter; struct dw_mci_slot *cur_slot; struct mmc_request *mrq; -- cgit v1.2.3