From e628dc999e43a9dd51fb6bd810772c277f934484 Mon Sep 17 00:00:00 2001 From: David Milburn Date: Tue, 14 May 2013 13:48:40 -0500 Subject: libata: export ata_port port_no attribute via /sys While registering host controller track port number based upon number of ports available on the controller, export port_no attribute through /sys. This patch is needed by udev for composing persistent links in /dev/disk/by-path. /sys/devices/pci0000:00/0000:00:1f.2/ata8/ata_port/ata8 total 0 lrwxrwxrwx. 1 root root 0 Mar 6 12:43 device -> ../../../ata8 -r--r--r--. 1 root root 4096 Mar 6 12:43 idle_irq -r--r--r--. 1 root root 4096 Mar 6 12:43 nr_pmp_links -r--r--r--. 1 root root 4096 Mar 6 12:43 port_no drwxr-xr-x. 2 root root 0 Mar 6 12:42 power lrwxrwxrwx. 1 root root 0 Mar 6 12:41 subsystem -> ../../../../../../class/ata_port -rw-r--r--. 1 root root 4096 Mar 6 12:40 uevent 1 Signed-off-by: David Milburn Signed-off-by: Tejun Heo --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/libata.h') diff --git a/include/linux/libata.h b/include/linux/libata.h index eae7a053dc51..47e029236f6e 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -746,6 +746,7 @@ struct ata_port { /* Flags that change dynamically, protected by ap->lock */ unsigned int pflags; /* ATA_PFLAG_xxx */ unsigned int print_id; /* user visible unique port ID */ + unsigned int local_port_no; /* host local port num */ unsigned int port_no; /* 0 based port no. inside the host */ #ifdef CONFIG_ATA_SFF -- cgit v1.2.3 From 966fbe193f47c68e70a80ec9991098e88e7959cb Mon Sep 17 00:00:00 2001 From: Vincent Pelletier Date: Tue, 21 May 2013 22:30:58 +0200 Subject: libata: Add atapi_dmadir force flag Some device require DMADIR to be enabled, but are not detected as such by atapi_id_dmadir. One such example is "Asus Serillel 2" SATA-host-to-PATA-device bridge: the bridge itself requires DMADIR, even if the bridged device does not. As atapi_dmadir module parameter can cause problems with some devices (as per Tejun Heo's memory), enabling it globally may not be possible depending on the hardware. This patch adds atapi_dmadir in the form of a "force" horkage value, allowing global, per-bus and per-device control. Signed-off-by: Vincent Pelletier Signed-off-by: Tejun Heo --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/libata.h') diff --git a/include/linux/libata.h b/include/linux/libata.h index 47e029236f6e..c886dc87aa81 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -399,6 +399,7 @@ enum { ATA_HORKAGE_BROKEN_FPDMA_AA = (1 << 15), /* skip AA */ ATA_HORKAGE_DUMP_ID = (1 << 16), /* dump IDENTIFY data */ ATA_HORKAGE_MAX_SEC_LBA48 = (1 << 17), /* Set max sects to 65535 */ + ATA_HORKAGE_ATAPI_DMADIR = (1 << 18), /* device requires dmadir */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ -- cgit v1.2.3 From 439d7a358f93a52458527329939be9f97db1242a Mon Sep 17 00:00:00 2001 From: Mark Langsdorf Date: Thu, 30 May 2013 15:17:30 -0500 Subject: ahci: make ahci_transmit_led_message into a function pointer Create a new ata_port_operations function pointer called transmit_led_message and give it the default value of ahci_transmit_led_message. This allows AHCI controllers with non-standard LED interfaces to use the existing em_ interface. Signed-off-by: Mark Langsdorf Signed-off-by: Tejun Heo --- include/linux/libata.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/libata.h') diff --git a/include/linux/libata.h b/include/linux/libata.h index c886dc87aa81..4ea55bb45deb 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -910,6 +910,9 @@ struct ata_port_operations { ssize_t (*sw_activity_show)(struct ata_device *dev, char *buf); ssize_t (*sw_activity_store)(struct ata_device *dev, enum sw_activity val); + ssize_t (*transmit_led_message)(struct ata_port *ap, u32 state, + ssize_t size); + /* * Obsolete */ -- cgit v1.2.3