From 99cf610aa4840d822cdc67d194b23b55010ca9bd Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 29 Jan 2009 20:31:32 +0900 Subject: libata: clear dev->ering in smarter way dev->ering used to be cleared together with the rest of ata_device in ata_dev_init() which is called whenever a probing event occurs. dev->ering is about to be used to track probing failures so it needs to remain persistent over multiple porbing events. This patch achieves this by doing the following. * Instead of CLEAR_OFFSET, define CLEAR_BEGIN and CLEAR_END and only clear between BEGIN and END. ering is moved after END. The split of persistent area is to allow hotter items remain at the head. * ering is explicitly cleared on ata_dev_disable() and when device attach succeeds. So, ering is persistent throug a device's life time (unless explicitly cleared of course) and also through periods inbetween disablement of an attached device and successful detection of the next one. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'include/linux/libata.h') diff --git a/include/linux/libata.h b/include/linux/libata.h index bca3ba25f52a..9dcefee5843c 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -580,7 +580,7 @@ struct ata_device { acpi_handle acpi_handle; union acpi_object *gtf_cache; #endif - /* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */ + /* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */ u64 n_sectors; /* size of device, if ATA */ unsigned int class; /* ATA_DEV_xxx */ unsigned long unpark_deadline; @@ -605,20 +605,22 @@ struct ata_device { u16 heads; /* Number of heads */ u16 sectors; /* Number of sectors per track */ - /* error history */ - int spdn_cnt; - struct ata_ering ering; - union { u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */ u32 gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */ }; + + /* error history */ + int spdn_cnt; + /* ering is CLEAR_END, read comment above CLEAR_END */ + struct ata_ering ering; }; -/* Offset into struct ata_device. Fields above it are maintained - * acress device init. Fields below are zeroed. +/* Fields between ATA_DEVICE_CLEAR_BEGIN and ATA_DEVICE_CLEAR_END are + * cleared to zero on ata_dev_init(). */ -#define ATA_DEVICE_CLEAR_OFFSET offsetof(struct ata_device, n_sectors) +#define ATA_DEVICE_CLEAR_BEGIN offsetof(struct ata_device, n_sectors) +#define ATA_DEVICE_CLEAR_END offsetof(struct ata_device, ering) struct ata_eh_info { struct ata_device *dev; /* offending device */ -- cgit v1.2.3 From 9062712fa9ed13b531dfc2228086650b8bd6a255 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 29 Jan 2009 20:31:36 +0900 Subject: libata: implement HORKAGE_1_5_GBPS and apply it to WD My Book 3Gbps is often much more prone to transmission failures. It's usually okay to let EH handle speed down after transmission failures but some WD My Book drives completely shutdown after certain transmission failures and after it only power cycling can revive them. Combined with the fact that external drives often end up with cable assembly which is longer than usual and more likely to have intervening gender, this makes these drives very likely to shutdown under certain configurations virtually rendering them unusable. This patch implements HOARKGE_1_5_GBPS and applies it to WD My Book such that 1.5Gbps is forced once the device is identified. Please take a look at the following bz for related reports. http://bugzilla.kernel.org/show_bug.cgi?id=9913 Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/libata.h') diff --git a/include/linux/libata.h b/include/linux/libata.h index 9dcefee5843c..5d87bc09a1f5 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -380,6 +380,7 @@ enum { ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands not multiple of 16 bytes */ ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firwmare update warning */ + ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ -- cgit v1.2.3 From e7d3ef13d52a126438f687a1a32da65ff926ed57 Mon Sep 17 00:00:00 2001 From: Stuart Hayes Date: Wed, 4 Mar 2009 11:59:46 -0800 Subject: libata: change drive ready wait after hard reset to 5s This fixes problems during resume with drives that take longer than 1s to be ready. The ATA-6 spec appears to allow 5 seconds for a drive to be ready. On one affected system, this patch changes "PM: resume devices took..." message from 17 seconds to 4 seconds, and gets rid of a lot of ugly timeout/error messages. Without this patch, the libata code moves on after 1s, tries to send a soft reset (which the drive doesn't see because it isn't ready) which also times out, then an IDENTIFY command is sent to the drive which times out, and finally the error handler will try to send another hard reset which will finally get things working. Signed-off-by: Stuart Hayes Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- include/linux/libata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/libata.h') diff --git a/include/linux/libata.h b/include/linux/libata.h index 5d87bc09a1f5..dd818c7decd7 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -275,7 +275,7 @@ enum { * advised to wait only for the following duration before * doing SRST. */ - ATA_TMOUT_PMP_SRST_WAIT = 1000, + ATA_TMOUT_PMP_SRST_WAIT = 5000, /* ATA bus states */ BUS_UNKNOWN = 0, -- cgit v1.2.3 From 5825627c9463581fd9e70f8285685889ae5bb9bb Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 27 Feb 2009 17:35:43 +0900 Subject: libata: fix dma_unmap_sg misuse libata passes the returned value of dma_map_sg() to dma_unmap_sg(),which is the misuse of dma_unmap_sg(). DMA-mapping.txt says: To unmap a scatterlist, just call: pci_unmap_sg(pdev, sglist, nents, direction); Again, make sure DMA activity has already finished. PLEASE NOTE: The 'nents' argument to the pci_unmap_sg call must be the _same_ one you passed into the pci_map_sg call, it should _NOT_ be the 'count' value _returned_ from the pci_map_sg call. Signed-off-by: FUJITA Tomonori Acked-by: Bartlomiej Zolnierkiewicz Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/libata.h') diff --git a/include/linux/libata.h b/include/linux/libata.h index dd818c7decd7..fbf064e13ad5 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -530,6 +530,7 @@ struct ata_queued_cmd { unsigned long flags; /* ATA_QCFLAG_xxx */ unsigned int tag; unsigned int n_elem; + unsigned int orig_n_elem; int dma_dir; -- cgit v1.2.3 From 84bda12af31f930e4200c5244aa111de2485d7b0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 2 Mar 2009 18:53:26 +0900 Subject: libata: align ap->sector_buf ap->sector_buf is used as DMA target and should at least be aligned on cacheline. This caused problems on some embedded machines. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux/libata.h') diff --git a/include/linux/libata.h b/include/linux/libata.h index fbf064e13ad5..dc18b87ed722 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -751,7 +751,8 @@ struct ata_port { acpi_handle acpi_handle; struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ #endif - u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */ + /* owned by EH */ + u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned; }; /* The following initializer overrides a method to NULL whether one of -- cgit v1.2.3