From b2c1fe81df7471de9f7e2918877ac04ec9cde35f Mon Sep 17 00:00:00 2001
From: Grant Grundler <grundler@parisc-linux.org>
Date: Fri, 21 Oct 2005 22:39:43 -0400
Subject: [PARISC] Allow STI_CONSOLE access to some FONTS

add || STI_CONSOLE to some of the basic FONTs. May need to get at
least one of them to default to "Y" for parisc.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
---
 drivers/video/console/Kconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index eb83a7874c71..7e731691e2a9 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -110,7 +110,7 @@ config STI_CONSOLE
 
 config FONTS
 	bool "Select compiled-in fonts"
-	depends on FRAMEBUFFER_CONSOLE
+	depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
 	help
 	  Say Y here if you would like to use fonts other than the default
 	  your frame buffer console usually use.
@@ -123,7 +123,7 @@ config FONTS
 
 config FONT_8x8
 	bool "VGA 8x8 font" if FONTS
-	depends on FRAMEBUFFER_CONSOLE
+	depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
 	default y if !SPARC32 && !SPARC64 && !FONTS
 	help
 	  This is the "high resolution" font for the VGA frame buffer (the one
@@ -137,7 +137,7 @@ config FONT_8x8
 
 config FONT_8x16
 	bool "VGA 8x16 font" if FONTS
-	depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || USB_SISUSBVGA_CON
+	depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON 
 	default y if !SPARC32 && !SPARC64 && !FONTS
 	help
 	  This is the "high resolution" font for the VGA frame buffer (the one
@@ -147,7 +147,7 @@ config FONT_8x16
 
 config FONT_6x11
 	bool "Mac console 6x11 font (not supported by all drivers)" if FONTS
-	depends on FRAMEBUFFER_CONSOLE
+	depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
 	default y if !SPARC32 && !SPARC64 && !FONTS && MAC
 	help
 	  Small console font with Macintosh-style high-half glyphs.  Some Mac
-- 
cgit v1.2.3


From 951a0150135c46c7791d68e0d1112900d99302d7 Mon Sep 17 00:00:00 2001
From: Matthew Wilcox <willy@parisc-linux.org>
Date: Fri, 21 Oct 2005 22:41:49 -0400
Subject: [PARISC] Reorganize sticore probe routine to be a little less
 convoluted

Fix some whitespace issues
Reorganise parisc_device probe routine to be a little less convoluted
Use ->hpa.start instead of ->hpa

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
---
 drivers/video/console/sticore.c | 126 +++++++++++++++++++---------------------
 1 file changed, 60 insertions(+), 66 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index d940f605acb6..a7bcd17112c0 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -511,12 +511,12 @@ sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name )
 	struct sti_cooked_font *cooked_font;
 	
 	if (!fbfont_name || !strlen(fbfont_name))
-	    return NULL;
+		return NULL;
 	fbfont = find_font(fbfont_name);
 	if (!fbfont)
-	    fbfont = get_default_font(1024,768);
+		fbfont = get_default_font(1024,768);
 	if (!fbfont)
-	    return NULL;
+		return NULL;
 
 	DPRINTK((KERN_DEBUG "selected %dx%d fb-font %s\n",
 			fbfont->width, fbfont->height, fbfont->name));
@@ -527,7 +527,7 @@ sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name )
 
 	nf = kmalloc(size, GFP_KERNEL);
 	if (!nf)
-	    return NULL;
+		return NULL;
 	memset(nf, 0, size);
 
 	nf->first_char = 0;
@@ -546,8 +546,8 @@ sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name )
 
 	cooked_font = kmalloc(sizeof(*cooked_font), GFP_KERNEL);
 	if (!cooked_font) {
-	    kfree(nf);
-	    return NULL;
+		kfree(nf);
+		return NULL;
 	}
 	
 	cooked_font->raw = nf;
@@ -595,7 +595,7 @@ sti_select_font(struct sti_cooked_rom *rom,
 static void __init 
 sti_dump_rom(struct sti_rom *rom)
 {
-        printk(KERN_INFO "    id %04x-%04x, conforms to spec rev. %d.%02x\n",
+	printk(KERN_INFO "    id %04x-%04x, conforms to spec rev. %d.%02x\n",
 		rom->graphics_id[0], 
 		rom->graphics_id[1],
 		rom->revno[0] >> 4, 
@@ -651,15 +651,16 @@ sti_search_font(struct sti_cooked_rom *rom, int height, int width)
 	struct sti_cooked_font *font;
 	int i = 0;
 	
-	for(font = rom->font_start; font; font = font->next_font, i++) {
-	    if((font->raw->width == width) && (font->raw->height == height))
+	for (font = rom->font_start; font; font = font->next_font, i++) {
+		if ((font->raw->width == width) &&
+		    (font->raw->height == height))
 			return i;
 	}
 	return 0;
 }
 
-#define BMODE_RELOCATE(offset)        offset = (offset) / 4;
-#define BMODE_LAST_ADDR_OFFS          0x50
+#define BMODE_RELOCATE(offset)		offset = (offset) / 4;
+#define BMODE_LAST_ADDR_OFFS		0x50
 
 static void * __init
 sti_bmode_font_raw(struct sti_cooked_font *f)
@@ -700,35 +701,35 @@ sti_get_bmode_rom (unsigned long address)
 {
 	struct sti_rom *raw;
 	u32 size;
-        struct sti_rom_font *raw_font, *font_start;
-    
+	struct sti_rom_font *raw_font, *font_start;
+
 	sti_bmode_rom_copy(address + BMODE_LAST_ADDR_OFFS, sizeof(size), &size);
-    
-        size = (size+3) / 4;
+
+	size = (size+3) / 4;
 	raw = kmalloc(size, GFP_KERNEL);
 	if (raw) {
-	    sti_bmode_rom_copy(address, size, raw);
-	    memmove (&raw->res004, &raw->type[0], 0x3c);
-    	    raw->type[3] = raw->res004;
+		sti_bmode_rom_copy(address, size, raw);
+		memmove (&raw->res004, &raw->type[0], 0x3c);
+		raw->type[3] = raw->res004;
 
-	    BMODE_RELOCATE (raw->region_list);
-	    BMODE_RELOCATE (raw->font_start);
+		BMODE_RELOCATE (raw->region_list);
+		BMODE_RELOCATE (raw->font_start);
 
-	    BMODE_RELOCATE (raw->init_graph);
-	    BMODE_RELOCATE (raw->state_mgmt);
-	    BMODE_RELOCATE (raw->font_unpmv);
-	    BMODE_RELOCATE (raw->block_move);
-	    BMODE_RELOCATE (raw->inq_conf);
+		BMODE_RELOCATE (raw->init_graph);
+		BMODE_RELOCATE (raw->state_mgmt);
+		BMODE_RELOCATE (raw->font_unpmv);
+		BMODE_RELOCATE (raw->block_move);
+		BMODE_RELOCATE (raw->inq_conf);
 
-	    raw_font = ((void *)raw) + raw->font_start;
-	    font_start = raw_font;
+		raw_font = ((void *)raw) + raw->font_start;
+		font_start = raw_font;
 		
-	    while (raw_font->next_font) {
-		    BMODE_RELOCATE (raw_font->next_font);
-		    raw_font = ((void *)font_start) + raw_font->next_font;
-	    }
+		while (raw_font->next_font) {
+			BMODE_RELOCATE (raw_font->next_font);
+			raw_font = ((void *)font_start) + raw_font->next_font;
+		}
 	}
-        return raw;
+	return raw;
 }
 
 struct sti_rom * __init
@@ -736,15 +737,15 @@ sti_get_wmode_rom (unsigned long address)
 {
 	struct sti_rom *raw;
 	unsigned long size;
-    
+
 	/* read the ROM size directly from the struct in ROM */ 
 	size = gsc_readl(address + offsetof(struct sti_rom,last_addr));
 
 	raw = kmalloc(size, GFP_KERNEL);
-	if(raw)
-	        sti_rom_copy(address, size, raw);
+	if (raw)
+		sti_rom_copy(address, size, raw);
 
-        return raw;
+	return raw;
 }
 
 int __init
@@ -757,14 +758,14 @@ sti_read_rom(int wordmode, struct sti_struct *sti, unsigned long address)
 	if (!cooked)
 		goto out_err;
 
-        if (wordmode)
-                raw = sti_get_wmode_rom (address);
-        else
-	        raw = sti_get_bmode_rom (address);
+	if (wordmode)
+		raw = sti_get_wmode_rom (address);
+	else
+		raw = sti_get_bmode_rom (address);
+
+	if (!raw)
+		goto out_err;
 
-        if (!raw)
-	        goto out_err;
-    
 	if (!sti_cook_fonts(cooked, raw)) {
 		printk(KERN_ERR "No font found for STI at %08lx\n", address);
 		goto out_err;
@@ -787,7 +788,7 @@ sti_read_rom(int wordmode, struct sti_struct *sti, unsigned long address)
 	sti->font_width = sti->font->raw->width;
 	sti->font_height = sti->font->raw->height;
 	if (!wordmode)
-	        sti->font->raw = sti_bmode_font_raw(sti->font);
+		sti->font->raw = sti_bmode_font_raw(sti->font);
 
 	sti->sti_mem_request = raw->sti_mem_req;
 	sti->graphics_id[0] = raw->graphics_id[0];
@@ -811,16 +812,16 @@ sti_try_rom_generic(unsigned long address, unsigned long hpa, struct pci_dev *pd
 	u32 sig;
 
 	if (num_sti_roms >= MAX_STI_ROMS) {
-	    printk(KERN_WARNING "maximum number of STI ROMS reached !\n");
-	    return NULL;
+		printk(KERN_WARNING "maximum number of STI ROMS reached !\n");
+		return NULL;
 	}
 	
 	sti = kmalloc(sizeof(*sti), GFP_KERNEL);
 	if (!sti) {
-	    printk(KERN_ERR "Not enough memory !\n");
-	    return NULL;
+		printk(KERN_ERR "Not enough memory !\n");
+		return NULL;
 	}
-		    
+
 	memset(sti, 0, sizeof(*sti));
 	spin_lock_init(&sti->lock);
 
@@ -932,28 +933,21 @@ static void __init sticore_check_for_default_sti(struct sti_struct *sti, char *p
  */
 static int __init sticore_pa_init(struct parisc_device *dev)
 {
-	unsigned long rom = 0;
 	char pa_path[21];
 	struct sti_struct *sti = NULL;
-	
-	if(dev->num_addrs) {
-		rom = dev->addr[0];
-	}
-	if (!rom) {
-		rom = dev->hpa;
-		DPRINTK((KERN_DEBUG "Trying STI ROM at %08lx, hpa at %08lx\n", rom, dev->hpa));
-		sti = sti_try_rom_generic(rom, dev->hpa, NULL);
-		rom = PAGE0->proc_sti;
-	}
-	if (!sti) {
-		DPRINTK((KERN_DEBUG "Trying STI ROM at %08lx, hpa at %08lx\n", rom, dev->hpa));
-		sti = sti_try_rom_generic(rom, dev->hpa, NULL);
-	}
+	int hpa = dev->hpa.start;
+
+	if (dev->num_addrs && dev->addr[0])
+		sti = sti_try_rom_generic(dev->addr[0], hpa, NULL);
+	if (!sti)
+		sti = sti_try_rom_generic(hpa, hpa, NULL);
+	if (!sti)
+		sti = sti_try_rom_generic(PAGE0->proc_sti, hpa, NULL);
 	if (!sti)
 		return 1;
-	
+
 	print_pa_hwpath(dev, pa_path);
-	sticore_check_for_default_sti (sti, pa_path);
+	sticore_check_for_default_sti(sti, pa_path);
 	return 0;
 }
 
-- 
cgit v1.2.3


From c6b8fdad144bbb915d124ffd95011ad55730bf9f Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Fri, 28 Oct 2005 14:05:16 +0100
Subject: [ARM] 3/4: Remove asm/hardware.h from Versatile and Integrator io.h

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/video/amba-clcd.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/video')

diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index 321dbe91dc14..cde6fd8eb390 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -22,6 +22,7 @@
 #include <linux/ioport.h>
 #include <linux/list.h>
 
+#include <asm/sizes.h>
 #include <asm/hardware/amba.h>
 #include <asm/hardware/clock.h>
 
-- 
cgit v1.2.3


From 53f4654272df7c51064825024340554b39c9efba Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Thu, 27 Oct 2005 22:25:43 -0700
Subject: [PATCH] Driver Core: fix up all callers of class_device_create()

The previous patch adding the ability to nest struct class_device
changed the paramaters to the call class_device_create().  This patch
fixes up all in-kernel users of the function.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/video/fbmem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 70be7009f8af..9073be4221a8 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1031,7 +1031,7 @@ register_framebuffer(struct fb_info *fb_info)
 			break;
 	fb_info->node = i;
 
-	fb_info->class_device = class_device_create(fb_class, MKDEV(FB_MAJOR, i),
+	fb_info->class_device = class_device_create(fb_class, NULL, MKDEV(FB_MAJOR, i),
 				    fb_info->device, "fb%d", i);
 	if (IS_ERR(fb_info->class_device)) {
 		/* Not fatal */
-- 
cgit v1.2.3


From 9480e307cd88ef09ec9294c7d97ebec18e6d2221 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@arm.linux.org.uk>
Date: Fri, 28 Oct 2005 09:52:56 -0700
Subject: [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level
 suspend/resume callbacks

In PM v1, all devices were called at SUSPEND_DISABLE level.  Then
all devices were called at SUSPEND_SAVE_STATE level, and finally
SUSPEND_POWER_DOWN level.  However, with PM v2, to maintain
compatibility for platform devices, I arranged for the PM v2
suspend/resume callbacks to call the old PM v1 suspend/resume
callbacks three times with each level in order so that existing
drivers continued to work.

Since this is obsolete infrastructure which is no longer necessary,
we can remove it.  Here's an (untested) patch to do exactly that.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/video/backlight/corgi_bl.c | 10 ++++-----
 drivers/video/imxfb.c              | 10 ++++-----
 drivers/video/pxafb.c              | 10 ++++-----
 drivers/video/s1d13xxxfb.c         |  7 ++----
 drivers/video/s3c2410fb.c          | 27 +++++++++-------------
 drivers/video/sa1100fb.c           | 10 ++++-----
 drivers/video/w100fb.c             | 46 ++++++++++++++++++--------------------
 7 files changed, 51 insertions(+), 69 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c
index 3c72c627e65e..1991fdb32dfb 100644
--- a/drivers/video/backlight/corgi_bl.c
+++ b/drivers/video/backlight/corgi_bl.c
@@ -73,17 +73,15 @@ static void corgibl_blank(int blank)
 }
 
 #ifdef CONFIG_PM
-static int corgibl_suspend(struct device *dev, pm_message_t state, u32 level)
+static int corgibl_suspend(struct device *dev, pm_message_t state)
 {
-	if (level == SUSPEND_POWER_DOWN)
-		corgibl_blank(FB_BLANK_POWERDOWN);
+	corgibl_blank(FB_BLANK_POWERDOWN);
 	return 0;
 }
 
-static int corgibl_resume(struct device *dev, u32 level)
+static int corgibl_resume(struct device *dev)
 {
-	if (level == RESUME_POWER_ON)
-		corgibl_blank(FB_BLANK_UNBLANK);
+	corgibl_blank(FB_BLANK_UNBLANK);
 	return 0;
 }
 #else
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 1d54d3d6960b..0b9301facbd3 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -424,23 +424,21 @@ static void imxfb_setup_gpio(struct imxfb_info *fbi)
  * Power management hooks.  Note that we won't be called from IRQ context,
  * unlike the blank functions above, so we may sleep.
  */
-static int imxfb_suspend(struct device *dev, pm_message_t state, u32 level)
+static int imxfb_suspend(struct device *dev, pm_message_t state)
 {
 	struct imxfb_info *fbi = dev_get_drvdata(dev);
 	pr_debug("%s\n",__FUNCTION__);
 
-	if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN)
-		imxfb_disable_controller(fbi);
+	imxfb_disable_controller(fbi);
 	return 0;
 }
 
-static int imxfb_resume(struct device *dev, u32 level)
+static int imxfb_resume(struct device *dev)
 {
 	struct imxfb_info *fbi = dev_get_drvdata(dev);
 	pr_debug("%s\n",__FUNCTION__);
 
-	if (level == RESUME_ENABLE)
-		imxfb_enable_controller(fbi);
+	imxfb_enable_controller(fbi);
 	return 0;
 }
 #else
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 194eed0a238c..6206da9dd5da 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -981,21 +981,19 @@ pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data)
  * Power management hooks.  Note that we won't be called from IRQ context,
  * unlike the blank functions above, so we may sleep.
  */
-static int pxafb_suspend(struct device *dev, pm_message_t state, u32 level)
+static int pxafb_suspend(struct device *dev, pm_message_t state)
 {
 	struct pxafb_info *fbi = dev_get_drvdata(dev);
 
-	if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN)
-		set_ctrlr_state(fbi, C_DISABLE_PM);
+	set_ctrlr_state(fbi, C_DISABLE_PM);
 	return 0;
 }
 
-static int pxafb_resume(struct device *dev, u32 level)
+static int pxafb_resume(struct device *dev)
 {
 	struct pxafb_info *fbi = dev_get_drvdata(dev);
 
-	if (level == RESUME_ENABLE)
-		set_ctrlr_state(fbi, C_ENABLE_PM);
+	set_ctrlr_state(fbi, C_ENABLE_PM);
 	return 0;
 }
 #else
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
index fa98d91c42eb..cb2f7a1de947 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -655,7 +655,7 @@ bail:
 }
 
 #ifdef CONFIG_PM
-static int s1d13xxxfb_suspend(struct device *dev, pm_message_t state, u32 level)
+static int s1d13xxxfb_suspend(struct device *dev, pm_message_t state)
 {
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct s1d13xxxfb_par *s1dfb = info->par;
@@ -702,15 +702,12 @@ static int s1d13xxxfb_suspend(struct device *dev, pm_message_t state, u32 level)
 		return 0;
 }
 
-static int s1d13xxxfb_resume(struct device *dev, u32 level)
+static int s1d13xxxfb_resume(struct device *dev)
 {
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct s1d13xxxfb_par *s1dfb = info->par;
 	struct s1d13xxxfb_pdata *pdata = NULL;
 
-	if (level != RESUME_ENABLE)
-		return 0;
-
 	/* awaken the chip */
 	s1d13xxxfb_writereg(s1dfb, S1DREG_PS_CNF, 0x10);
 
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index 5ab79afb53b7..3862d3cb1fb2 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -847,37 +847,32 @@ static int s3c2410fb_remove(struct device *dev)
 
 /* suspend and resume support for the lcd controller */
 
-static int s3c2410fb_suspend(struct device *dev, pm_message_t state, u32 level)
+static int s3c2410fb_suspend(struct device *dev, pm_message_t state)
 {
 	struct fb_info	   *fbinfo = dev_get_drvdata(dev);
 	struct s3c2410fb_info *info = fbinfo->par;
 
-	if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN) {
-		s3c2410fb_stop_lcd();
+	s3c2410fb_stop_lcd();
 
-		/* sleep before disabling the clock, we need to ensure
-		 * the LCD DMA engine is not going to get back on the bus
-		 * before the clock goes off again (bjd) */
+	/* sleep before disabling the clock, we need to ensure
+	 * the LCD DMA engine is not going to get back on the bus
+	 * before the clock goes off again (bjd) */
 
-		msleep(1);
-		clk_disable(info->clk);
-	}
+	msleep(1);
+	clk_disable(info->clk);
 
 	return 0;
 }
 
-static int s3c2410fb_resume(struct device *dev, u32 level)
+static int s3c2410fb_resume(struct device *dev)
 {
 	struct fb_info	   *fbinfo = dev_get_drvdata(dev);
 	struct s3c2410fb_info *info = fbinfo->par;
 
-	if (level == RESUME_ENABLE) {
-		clk_enable(info->clk);
-		msleep(1);
-
-		s3c2410fb_init_registers(info);
+	clk_enable(info->clk);
+	msleep(1);
 
-	}
+	s3c2410fb_init_registers(info);
 
 	return 0;
 }
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 8000890e4271..78e5f194b0df 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -1309,21 +1309,19 @@ sa1100fb_freq_policy(struct notifier_block *nb, unsigned long val,
  * Power management hooks.  Note that we won't be called from IRQ context,
  * unlike the blank functions above, so we may sleep.
  */
-static int sa1100fb_suspend(struct device *dev, pm_message_t state, u32 level)
+static int sa1100fb_suspend(struct device *dev, pm_message_t state)
 {
 	struct sa1100fb_info *fbi = dev_get_drvdata(dev);
 
-	if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN)
-		set_ctrlr_state(fbi, C_DISABLE_PM);
+	set_ctrlr_state(fbi, C_DISABLE_PM);
 	return 0;
 }
 
-static int sa1100fb_resume(struct device *dev, u32 level)
+static int sa1100fb_resume(struct device *dev)
 {
 	struct sa1100fb_info *fbi = dev_get_drvdata(dev);
 
-	if (level == RESUME_ENABLE)
-		set_ctrlr_state(fbi, C_ENABLE_PM);
+	set_ctrlr_state(fbi, C_ENABLE_PM);
 	return 0;
 }
 #else
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index 0030c071da8f..752bf88906a9 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -438,36 +438,34 @@ static void w100fb_restore_vidmem(struct w100fb_par *par)
 	}
 }
 
-static int w100fb_suspend(struct device *dev, pm_message_t state, uint32_t level)
+static int w100fb_suspend(struct device *dev, pm_message_t state)
 {
-	if (level == SUSPEND_POWER_DOWN) {
-		struct fb_info *info = dev_get_drvdata(dev);
-		struct w100fb_par *par=info->par;
-		struct w100_tg_info *tg = par->mach->tg;
-
-		w100fb_save_vidmem(par);
-		if(tg && tg->suspend)
-			tg->suspend(par);
-		w100_suspend(W100_SUSPEND_ALL);
-		par->blanked = 1;
-	}
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct w100fb_par *par=info->par;
+	struct w100_tg_info *tg = par->mach->tg;
+
+	w100fb_save_vidmem(par);
+	if(tg && tg->suspend)
+		tg->suspend(par);
+	w100_suspend(W100_SUSPEND_ALL);
+	par->blanked = 1;
+
 	return 0;
 }
 
-static int w100fb_resume(struct device *dev, uint32_t level)
+static int w100fb_resume(struct device *dev)
 {
-	if (level == RESUME_POWER_ON) {
-		struct fb_info *info = dev_get_drvdata(dev);
-		struct w100fb_par *par=info->par;
-		struct w100_tg_info *tg = par->mach->tg;
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct w100fb_par *par=info->par;
+	struct w100_tg_info *tg = par->mach->tg;
+
+	w100_hw_init(par);
+	w100fb_activate_var(par);
+	w100fb_restore_vidmem(par);
+	if(tg && tg->resume)
+		tg->resume(par);
+	par->blanked = 0;
 
-		w100_hw_init(par);
-		w100fb_activate_var(par);
-		w100fb_restore_vidmem(par);
-		if(tg && tg->resume)
-			tg->resume(par);
-		par->blanked = 0;
-	}
 	return 0;
 }
 #else
-- 
cgit v1.2.3


From 4153812fc10ea91cb1a7b6ea4f4337dd211c1ef7 Mon Sep 17 00:00:00 2001
From: Grant Coady <gcoady@gmail.com>
Date: Thu, 29 Sep 2005 10:40:52 +1000
Subject: [PATCH] pci_ids: macros: replace partial with whole symbols

pci_ids cleanup: replace symbols built by macros with whole symbols to
aid grep searches.

Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/video/cirrusfb.c |   24 ++++++++++++------------
 sound/oss/ymfpci.c       |   17 +++++++++--------
 sound/pci/bt87x.c        |   11 +++++++----
 3 files changed, 28 insertions(+), 24 deletions(-)
---
 drivers/video/cirrusfb.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index a3040429c27b..3a26f9cc8585 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -275,20 +275,20 @@ static const struct cirrusfb_board_info_rec {
 
 #ifdef CONFIG_PCI
 #define CHIP(id, btype) \
-	{ PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_##id, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (btype) }
+	{ PCI_VENDOR_ID_CIRRUS, id, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (btype) }
 
 static struct pci_device_id cirrusfb_pci_table[] = {
-	CHIP( CIRRUS_5436,	BT_ALPINE ),
-	CHIP( CIRRUS_5434_8,	BT_ALPINE ),
-	CHIP( CIRRUS_5434_4,	BT_ALPINE ),
-	CHIP( CIRRUS_5430,	BT_ALPINE ), /* GD-5440 has identical id */
-	CHIP( CIRRUS_7543,	BT_ALPINE ),
-	CHIP( CIRRUS_7548,	BT_ALPINE ),
-	CHIP( CIRRUS_5480,	BT_GD5480 ), /* MacPicasso probably */
-	CHIP( CIRRUS_5446,	BT_PICASSO4 ), /* Picasso 4 is a GD5446 */
-	CHIP( CIRRUS_5462,	BT_LAGUNA ), /* CL Laguna */
-	CHIP( CIRRUS_5464,	BT_LAGUNA ), /* CL Laguna 3D */
-	CHIP( CIRRUS_5465,	BT_LAGUNA ), /* CL Laguna 3DA*/
+	CHIP( PCI_DEVICE_ID_CIRRUS_5436, BT_ALPINE ),
+	CHIP( PCI_DEVICE_ID_CIRRUS_5434_8, BT_ALPINE ),
+	CHIP( PCI_DEVICE_ID_CIRRUS_5434_4, BT_ALPINE ),
+	CHIP( PCI_DEVICE_ID_CIRRUS_5430, BT_ALPINE ), /* GD-5440 is same id */
+	CHIP( PCI_DEVICE_ID_CIRRUS_7543, BT_ALPINE ),
+	CHIP( PCI_DEVICE_ID_CIRRUS_7548, BT_ALPINE ),
+	CHIP( PCI_DEVICE_ID_CIRRUS_5480, BT_GD5480 ), /* MacPicasso likely */
+	CHIP( PCI_DEVICE_ID_CIRRUS_5446, BT_PICASSO4 ), /* Picasso 4 is 5446 */
+	CHIP( PCI_DEVICE_ID_CIRRUS_5462, BT_LAGUNA ), /* CL Laguna */
+	CHIP( PCI_DEVICE_ID_CIRRUS_5464, BT_LAGUNA ), /* CL Laguna 3D */
+	CHIP( PCI_DEVICE_ID_CIRRUS_5465, BT_LAGUNA ), /* CL Laguna 3DA*/
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, cirrusfb_pci_table);
-- 
cgit v1.2.3


From 8b150478aeb1a8edb9015c2f7ac4da637ff65c45 Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Fri, 28 Oct 2005 17:46:18 -0700
Subject: [PATCH] ppc: make phys_mem_access_prot() work with pfns instead of
 addresses

Change the phys_mem_access_prot() function to take a pfn instead of an
address.  This allows mmap64() to work on /dev/mem for addresses above 4G
on 32-bit architectures.  We start with a pfn in mmap_mem(), so there's no
need to convert to an address; in fact, it's actively bad, since the
conversion can overflow when the address is above 4G.

Similarly fix the ppc32 page_is_ram() function to avoid a conversion to an
address by directly comparing to max_pfn.  Working with max_pfn instead of
high_memory fixes page_is_ram() to give the right answer for highmem pages.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 drivers/video/fbmem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 70be7009f8af..ca02aa2bfcec 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -918,7 +918,7 @@ fb_mmap(struct file *file, struct vm_area_struct * vma)
 	}
 #endif
 #elif defined(__powerpc__)
-	vma->vm_page_prot = phys_mem_access_prot(file, off,
+	vma->vm_page_prot = phys_mem_access_prot(file, off >> PAGE_SHIFT,
 						 vma->vm_end - vma->vm_start,
 						 vma->vm_page_prot);
 #elif defined(__alpha__)
-- 
cgit v1.2.3


From d052d1beff706920e82c5d55006b08e256b5df09 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 29 Oct 2005 19:07:23 +0100
Subject: Create platform_device.h to contain all the platform device details.
 Convert everyone who uses platform_bus_type to include
 linux/platform_device.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/video/acornfb.c            | 2 +-
 drivers/video/arcfb.c              | 1 +
 drivers/video/backlight/corgi_bl.c | 2 +-
 drivers/video/dnfb.c               | 2 ++
 drivers/video/epson1355fb.c        | 2 ++
 drivers/video/gbefb.c              | 2 +-
 drivers/video/imxfb.c              | 2 +-
 drivers/video/pxafb.c              | 2 +-
 drivers/video/q40fb.c              | 1 +
 drivers/video/s1d13xxxfb.c         | 2 +-
 drivers/video/s3c2410fb.c          | 1 +
 drivers/video/sa1100fb.c           | 2 +-
 drivers/video/sgivwfb.c            | 2 ++
 drivers/video/vesafb.c             | 2 ++
 drivers/video/vfb.c                | 2 ++
 drivers/video/w100fb.c             | 2 +-
 16 files changed, 21 insertions(+), 8 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
index f02965f39501..9b6a39348f81 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -26,7 +26,7 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/fb.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
 #include <asm/hardware.h>
diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
index d28457e0c063..126daff1c848 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/arcfb.c
@@ -47,6 +47,7 @@
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/arcfb.h>
+#include <linux/platform_device.h>
 
 #include <asm/uaccess.h>
 
diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c
index 1991fdb32dfb..4867498f68e8 100644
--- a/drivers/video/backlight/corgi_bl.c
+++ b/drivers/video/backlight/corgi_bl.c
@@ -14,7 +14,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/fb.h>
 #include <linux/backlight.h>
diff --git a/drivers/video/dnfb.c b/drivers/video/dnfb.c
index 1dbb82dca40b..1785686a7f11 100644
--- a/drivers/video/dnfb.c
+++ b/drivers/video/dnfb.c
@@ -6,6 +6,8 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/irq.h>
diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
index 116e808d71cd..7363d0b25fdf 100644
--- a/drivers/video/epson1355fb.c
+++ b/drivers/video/epson1355fb.c
@@ -54,6 +54,8 @@
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/platform_device.h>
+
 #include <asm/types.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index d3c1922cb13a..fc0a1beef968 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -11,7 +11,7 @@
 
 #include <linux/config.h>
 #include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/errno.h>
 #include <linux/fb.h>
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 0b9301facbd3..64d9bcc38da3 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -31,7 +31,7 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
 #include <asm/hardware.h>
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 6206da9dd5da..efd9333b05c2 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -36,7 +36,7 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
 #include <asm/hardware.h>
diff --git a/drivers/video/q40fb.c b/drivers/video/q40fb.c
index 162012bb9264..8416b2e2b501 100644
--- a/drivers/video/q40fb.c
+++ b/drivers/video/q40fb.c
@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/platform_device.h>
 
 #include <asm/uaccess.h>
 #include <asm/setup.h>
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
index cb2f7a1de947..f4437430dc5f 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -30,7 +30,7 @@
 
 #include <linux/config.h>
 #include <linux/module.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/delay.h>
 
 #include <linux/types.h>
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index 3862d3cb1fb2..3cef90456a4b 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -86,6 +86,7 @@
 #include <linux/interrupt.h>
 #include <linux/workqueue.h>
 #include <linux/wait.h>
+#include <linux/platform_device.h>
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 78e5f194b0df..3d35b28aaac7 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -173,7 +173,7 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
 #include <asm/hardware.h>
diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
index 8413907b379a..cf5106eab2d5 100644
--- a/drivers/video/sgivwfb.c
+++ b/drivers/video/sgivwfb.c
@@ -18,6 +18,8 @@
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/platform_device.h>
+
 #include <asm/io.h>
 #include <asm/mtrr.h>
 
diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c
index b1243da55fc5..3cc23106641d 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/vesafb.c
@@ -19,6 +19,8 @@
 #include <linux/fb.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
+
 #include <video/vga.h>
 #include <asm/io.h>
 #include <asm/mtrr.h>
diff --git a/drivers/video/vfb.c b/drivers/video/vfb.c
index b137a3fe0752..92d46555dd86 100644
--- a/drivers/video/vfb.c
+++ b/drivers/video/vfb.c
@@ -20,6 +20,8 @@
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
 #include <asm/uaccess.h>
 #include <linux/fb.h>
 #include <linux/init.h>
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index 752bf88906a9..cf8cdb108fd9 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -25,7 +25,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/string.h>
 #include <linux/vmalloc.h>
 #include <asm/io.h>
-- 
cgit v1.2.3


From 6d7bf017e821f3c093c80d1ee919d8d87904701c Mon Sep 17 00:00:00 2001
From: Thiemo Seufer <ths@networkno.de>
Date: Fri, 4 Mar 2005 19:40:45 +0000
Subject: It helps to not use a _mem_ function for requesting I/O space.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 drivers/video/gbefb.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index d3c1922cb13a..485604cd4462 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -1126,7 +1126,7 @@ static int __init gbefb_probe(struct device *dev)
 	gbefb_setup(options);
 #endif
 
-	if (!request_mem_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) {
+	if (!request_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) {
 		printk(KERN_ERR "gbefb: couldn't reserve mmio region\n");
 		ret = -EBUSY;
 		goto out_release_framebuffer;
@@ -1152,12 +1152,24 @@ static int __init gbefb_probe(struct device *dev)
 	if (gbe_mem_phys) {
 		/* memory was allocated at boot time */
 		gbe_mem = ioremap_nocache(gbe_mem_phys, gbe_mem_size);
+		if (!gbe_mem) {
+			printk(KERN_ERR "gbefb: couldn't map framebuffer\n");
+			ret = -ENOMEM;
+			goto out_tiles_free;
+		}
+
 		gbe_dma_addr = 0;
 	} else {
 		/* try to allocate memory with the classical allocator
 		 * this has high chance to fail on low memory machines */
 		gbe_mem = dma_alloc_coherent(NULL, gbe_mem_size, &gbe_dma_addr,
 					     GFP_KERNEL);
+		if (!gbe_mem) {
+			printk(KERN_ERR "gbefb: couldn't allocate framebuffer memory\n");
+			ret = -ENOMEM;
+			goto out_tiles_free;
+		}
+
 		gbe_mem_phys = (unsigned long) gbe_dma_addr;
 	}
 
@@ -1165,12 +1177,6 @@ static int __init gbefb_probe(struct device *dev)
 	mtrr_add(gbe_mem_phys, gbe_mem_size, MTRR_TYPE_WRCOMB, 1);
 #endif
 
-	if (!gbe_mem) {
-		printk(KERN_ERR "gbefb: couldn't map framebuffer\n");
-		ret = -ENXIO;
-		goto out_tiles_free;
-	}
-
 	/* map framebuffer memory into tiles table */
 	for (i = 0; i < (gbe_mem_size >> TILE_SHIFT); i++)
 		gbe_tiles.cpu[i] = (gbe_mem_phys >> TILE_SHIFT) + i;
-- 
cgit v1.2.3


From 3b495f2bb749b828499135743b9ddec46e34fda8 Mon Sep 17 00:00:00 2001
From: Pete Popov <ppopov@embeddedalley.com>
Date: Mon, 4 Apr 2005 01:06:19 +0000
Subject: Au1100 FB driver uplift for 2.6.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Antonino Daplas <adaplas@pol.net>
---
 drivers/video/Makefile   |   2 +-
 drivers/video/au1100fb.c | 971 ++++++++++++++++++++++++-----------------------
 drivers/video/au1100fb.h | 614 +++++++++++++++---------------
 3 files changed, 810 insertions(+), 777 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 1fff29f48ca8..97c5d03ac8d9 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -86,7 +86,7 @@ obj-$(CONFIG_FB_CIRRUS)		  += cirrusfb.o
 obj-$(CONFIG_FB_ASILIANT)	  += asiliantfb.o
 obj-$(CONFIG_FB_PXA)		  += pxafb.o
 obj-$(CONFIG_FB_W100)		  += w100fb.o
-obj-$(CONFIG_FB_AU1100)		  += au1100fb.o fbgen.o
+obj-$(CONFIG_FB_AU1100)		  += au1100fb.o
 obj-$(CONFIG_FB_PMAG_AA)	  += pmag-aa-fb.o
 obj-$(CONFIG_FB_PMAG_BA)	  += pmag-ba-fb.o
 obj-$(CONFIG_FB_PMAGB_B)	  += pmagb-b-fb.o
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index b6fe30c3ad62..a5129806172f 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -2,6 +2,11 @@
  * BRIEF MODULE DESCRIPTION
  *	Au1100 LCD Driver.
  *
+ * Rewritten for 2.6 by Embedded Alley Solutions
+ * 	<source@embeddedalley.com>, based on submissions by
+ *  	Karl Lessard <klessard@sunrisetelecom.com>
+ *  	<c.pellegrin@exadron.com>
+ *
  * Copyright 2002 MontaVista Software
  * Author: MontaVista Software, Inc.
  *		ppopov@mvista.com or source@mvista.com
@@ -33,298 +38,253 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-
+#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
 #include <linux/fb.h>
 #include <linux/init.h>
-#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
 
-#include <asm/au1000.h>
-#include <asm/pb1100.h>
-#include "au1100fb.h"
+#include <asm/mach-au1x00/au1000.h>
 
-#include <video/fbcon.h>
-#include <video/fbcon-mfb.h>
-#include <video/fbcon-cfb2.h>
-#include <video/fbcon-cfb4.h>
-#include <video/fbcon-cfb8.h>
-#include <video/fbcon-cfb16.h>
+#define DEBUG 0
+
+#include "au1100fb.h"
 
 /*
  * Sanity check. If this is a new Au1100 based board, search for
  * the PB1100 ifdefs to make sure you modify the code accordingly.
  */
-#if defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_HYDROGEN3)
+#if defined(CONFIG_MIPS_PB1100)
+  #include <asm/mach-pb1x00/pb1100.h>
+#elif defined(CONFIG_MIPS_DB1100)
+  #include <asm/mach-db1x00/db1x00.h>
 #else
-error Unknown Au1100 board
+  #error "Unknown Au1100 board, Au1100 FB driver not supported"
 #endif
 
-#define CMAPSIZE 16
-
-static int my_lcd_index; /* default is zero */
-struct known_lcd_panels *p_lcd;
-AU1100_LCD *p_lcd_reg = (AU1100_LCD *)AU1100_LCD_ADDR;
-
-struct au1100fb_info {
-	struct fb_info_gen gen;
-	unsigned long fb_virt_start;
-	unsigned long fb_size;
-	unsigned long fb_phys;
-	int mmaped;
-	int nohwcursor;
+#define DRIVER_NAME "au1100fb"
+#define DRIVER_DESC "LCD controller driver for AU1100 processors"
 
-	struct { unsigned red, green, blue, pad; } palette[256];
+#define to_au1100fb_device(_info) \
+	  (_info ? container_of(_info, struct au1100fb_device, info) : NULL);
 
-#if defined(FBCON_HAS_CFB16)
-	u16 fbcon_cmap16[16];
-#endif
+/* Bitfields format supported by the controller. Note that the order of formats
+ * SHOULD be the same as in the LCD_CONTROL_SBPPF field, so we can retrieve the
+ * right pixel format by doing rgb_bitfields[LCD_CONTROL_SBPPF_XXX >> LCD_CONTROL_SBPPF]
+ */
+struct fb_bitfield rgb_bitfields[][4] =
+{
+  	/*     Red, 	   Green, 	 Blue, 	     Transp   */
+	{ { 10, 6, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
+	{ { 11, 5, 0 }, { 5, 6, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
+	{ { 11, 5, 0 }, { 6, 5, 0 }, { 0, 6, 0 }, { 0, 0, 0 } },
+	{ { 10, 5, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 15, 1, 0 } },
+	{ { 11, 5, 0 }, { 6, 5, 0 }, { 1, 5, 0 }, { 0, 1, 0 } },
+
+	/* The last is used to describe 12bpp format */
+	{ { 8, 4, 0 },  { 4, 4, 0 }, { 0, 4, 0 }, { 0, 0, 0 } },
 };
 
-
-struct au1100fb_par {
-        struct fb_var_screeninfo var;
-
-	int line_length;  // in bytes
-	int cmap_len;     // color-map length
+static struct fb_fix_screeninfo au1100fb_fix __initdata = {
+	.id		= "AU1100 FB",
+	.xpanstep 	= 1,
+	.ypanstep 	= 1,
+	.type		= FB_TYPE_PACKED_PIXELS,
+	.accel		= FB_ACCEL_NONE,
 };
 
-
-static struct au1100fb_info fb_info;
-static struct au1100fb_par current_par;
-static struct display disp;
-
-int au1100fb_init(void);
-void au1100fb_setup(char *options, int *ints);
-static int au1100fb_mmap(struct fb_info *fb, struct file *file,
-		struct vm_area_struct *vma);
-static int au1100_blank(int blank_mode, struct fb_info_gen *info);
-static int au1100fb_ioctl(struct inode *inode, struct file *file, u_int cmd,
-			  u_long arg, int con, struct fb_info *info);
-
-void au1100_nocursor(struct display *p, int mode, int xx, int yy){};
-
-static struct fb_ops au1100fb_ops = {
-	.owner		= THIS_MODULE,
-	.fb_get_fix	= fbgen_get_fix,
-	.fb_get_var	= fbgen_get_var,
-	.fb_set_var	= fbgen_set_var,
-	.fb_get_cmap	= fbgen_get_cmap,
-	.fb_set_cmap	= fbgen_set_cmap,
-	.fb_pan_display	= fbgen_pan_display,
-        .fb_ioctl	= au1100fb_ioctl,
-	.fb_mmap	= au1100fb_mmap,
+static struct fb_var_screeninfo au1100fb_var __initdata = {
+	.activate	= FB_ACTIVATE_NOW,
+	.height		= -1,
+	.width		= -1,
+	.vmode		= FB_VMODE_NONINTERLACED,
 };
 
-static void au1100_detect(void)
-{
-	/*
-	 *  This function should detect the current video mode settings
-	 *  and store it as the default video mode
-	 */
+static struct au1100fb_drv_info drv_info;
 
-	/*
-	 * Yeh, well, we're not going to change any settings so we're
-	 * always stuck with the default ...
+/*
+ * Set hardware with var settings. This will enable the controller with a specific
+ * mode, normally validated with the fb_check_var method
 	 */
-
-}
-
-static int au1100_encode_fix(struct fb_fix_screeninfo *fix,
-		const void *_par, struct fb_info_gen *_info)
+int au1100fb_setmode(struct au1100fb_device *fbdev)
 {
-        struct au1100fb_info *info = (struct au1100fb_info *) _info;
-        struct au1100fb_par *par = (struct au1100fb_par *) _par;
-	struct fb_var_screeninfo *var = &par->var;
-
-	memset(fix, 0, sizeof(struct fb_fix_screeninfo));
-
-	fix->smem_start = info->fb_phys;
-	fix->smem_len = info->fb_size;
-	fix->type = FB_TYPE_PACKED_PIXELS;
-	fix->type_aux = 0;
-        fix->visual = (var->bits_per_pixel == 8) ?
-	       	FB_VISUAL_PSEUDOCOLOR	: FB_VISUAL_TRUECOLOR;
-	fix->ywrapstep = 0;
-	fix->xpanstep = 1;
-	fix->ypanstep = 1;
-	fix->line_length = current_par.line_length;
-	return 0;
-}
+	struct fb_info *info = &fbdev->info;
+	u32 words;
+	int index;
 
-static void set_color_bitfields(struct fb_var_screeninfo *var)
-{
-	switch (var->bits_per_pixel) {
-	case 8:
-		var->red.offset = 0;
-		var->red.length = 8;
-		var->green.offset = 0;
-		var->green.length = 8;
-		var->blue.offset = 0;
-		var->blue.length = 8;
-		var->transp.offset = 0;
-		var->transp.length = 0;
-		break;
-	case 16:	/* RGB 565 */
-		var->red.offset = 11;
-		var->red.length = 5;
-		var->green.offset = 5;
-		var->green.length = 6;
-		var->blue.offset = 0;
-		var->blue.length = 5;
-		var->transp.offset = 0;
-		var->transp.length = 0;
-		break;
+	if (!fbdev)
+		return -EINVAL;
+
+	/* Update var-dependent FB info */
+	if (panel_is_active(fbdev->panel) || panel_is_color(fbdev->panel)) {
+		if (info->var.bits_per_pixel <= 8) {
+			/* palettized */
+			info->var.red.offset    = 0;
+			info->var.red.length    = info->var.bits_per_pixel;
+			info->var.red.msb_right = 0;
+
+			info->var.green.offset  = 0;
+			info->var.green.length  = info->var.bits_per_pixel;
+			info->var.green.msb_right = 0;
+
+			info->var.blue.offset   = 0;
+			info->var.blue.length   = info->var.bits_per_pixel;
+			info->var.blue.msb_right = 0;
+
+			info->var.transp.offset = 0;
+			info->var.transp.length = 0;
+			info->var.transp.msb_right = 0;
+
+			info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+			info->fix.line_length = info->var.xres_virtual /
+							(8/info->var.bits_per_pixel);
+		} else {
+			/* non-palettized */
+			index = (fbdev->panel->control_base & LCD_CONTROL_SBPPF_MASK) >> LCD_CONTROL_SBPPF_BIT;
+			info->var.red = rgb_bitfields[index][0];
+			info->var.green = rgb_bitfields[index][1];
+			info->var.blue = rgb_bitfields[index][2];
+			info->var.transp = rgb_bitfields[index][3];
+
+			info->fix.visual = FB_VISUAL_TRUECOLOR;
+			info->fix.line_length = info->var.xres_virtual << 1; /* depth=16 */
+	}
+	} else {
+		/* mono */
+		info->fix.visual = FB_VISUAL_MONO10;
+		info->fix.line_length = info->var.xres_virtual / 8;
 	}
 
-	var->red.msb_right = 0;
-	var->green.msb_right = 0;
-	var->blue.msb_right = 0;
-	var->transp.msb_right = 0;
-}
+	info->screen_size = info->fix.line_length * info->var.yres_virtual;
 
-static int au1100_decode_var(const struct fb_var_screeninfo *var,
-		void *_par, struct fb_info_gen *_info)
-{
+	/* Determine BPP mode and format */
+	fbdev->regs->lcd_control = fbdev->panel->control_base |
+			    ((info->var.rotate/90) << LCD_CONTROL_SM_BIT);
 
-	struct au1100fb_par *par = (struct au1100fb_par *)_par;
+	fbdev->regs->lcd_intenable = 0;
+	fbdev->regs->lcd_intstatus = 0;
 
-	/*
-	 * Don't allow setting any of these yet: xres and yres don't
-	 * make sense for LCD panels.
-	 */
-	if (var->xres != p_lcd->xres ||
-	    var->yres != p_lcd->yres ||
-	    var->xres != p_lcd->xres ||
-	    var->yres != p_lcd->yres) {
-		return -EINVAL;
-	}
-	if(var->bits_per_pixel != p_lcd->bpp) {
-		return -EINVAL;
-	}
+	fbdev->regs->lcd_horztiming = fbdev->panel->horztiming;
 
-	memset(par, 0, sizeof(struct au1100fb_par));
-	par->var = *var;
-
-	/* FIXME */
-	switch (var->bits_per_pixel) {
-		case 8:
-			par->var.bits_per_pixel = 8;
-			break;
-		case 16:
-			par->var.bits_per_pixel = 16;
-			break;
-		default:
-			printk("color depth %d bpp not supported\n",
-					var->bits_per_pixel);
-			return -EINVAL;
+	fbdev->regs->lcd_verttiming = fbdev->panel->verttiming;
+
+	fbdev->regs->lcd_clkcontrol = fbdev->panel->clkcontrol_base;
 
+	fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(fbdev->fb_phys);
+
+	if (panel_is_dual(fbdev->panel)) {
+		/* Second panel display seconf half of screen if possible,
+		 * otherwise display the same as the first panel */
+		if (info->var.yres_virtual >= (info->var.yres << 1)) {
+			fbdev->regs->lcd_dmaaddr1 = LCD_DMA_SA_N(fbdev->fb_phys +
+							  (info->fix.line_length *
+						          (info->var.yres_virtual >> 1)));
+		} else {
+			fbdev->regs->lcd_dmaaddr1 = LCD_DMA_SA_N(fbdev->fb_phys);
+		}
 	}
-	set_color_bitfields(&par->var);
-	par->cmap_len = (par->var.bits_per_pixel == 8) ? 256 : 16;
-	return 0;
-}
 
-static int au1100_encode_var(struct fb_var_screeninfo *var,
-		const void *par, struct fb_info_gen *_info)
-{
+	words = info->fix.line_length / sizeof(u32);
+	if (!info->var.rotate || (info->var.rotate == 180)) {
+		words *= info->var.yres_virtual;
+		if (info->var.rotate /* 180 */) {
+			words -= (words % 8); /* should be divisable by 8 */
+		}
+	}
+	fbdev->regs->lcd_words = LCD_WRD_WRDS_N(words);
 
-	*var = ((struct au1100fb_par *)par)->var;
-	return 0;
-}
+	fbdev->regs->lcd_pwmdiv = 0;
+	fbdev->regs->lcd_pwmhi = 0;
 
-static void
-au1100_get_par(void *_par, struct fb_info_gen *_info)
-{
-	*(struct au1100fb_par *)_par = current_par;
-}
+	/* Resume controller */
+	fbdev->regs->lcd_control |= LCD_CONTROL_GO;
 
-static void au1100_set_par(const void *par, struct fb_info_gen *info)
-{
-	/* nothing to do: we don't change any settings */
+	return 0;
 }
 
-static int au1100_getcolreg(unsigned regno, unsigned *red, unsigned *green,
-			 unsigned *blue, unsigned *transp,
-			 struct fb_info *info)
+/* fb_setcolreg
+ * Set color in LCD palette.
+ */
+int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
 {
+	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+	u32 *palette = fbdev->regs->lcd_pallettebase;
+	u32 value;
 
-	struct au1100fb_info* i = (struct au1100fb_info*)info;
-
-	if (regno > 255)
-		return 1;
+	if (regno > (AU1100_LCD_NBR_PALETTE_ENTRIES - 1))
+		return -EINVAL;
 
-	*red    = i->palette[regno].red;
-	*green  = i->palette[regno].green;
-	*blue   = i->palette[regno].blue;
-	*transp = 0;
+	if (fbi->var.grayscale) {
+		/* Convert color to grayscale */
+		red = green = blue =
+			(19595 * red + 38470 * green + 7471 * blue) >> 16;
+	}
 
-	return 0;
-}
+	if (fbi->fix.visual == FB_VISUAL_TRUECOLOR) {
+		/* Place color in the pseudopalette */
+		if (regno > 16)
+			return -EINVAL;
 
-static int au1100_setcolreg(unsigned regno, unsigned red, unsigned green,
-			 unsigned blue, unsigned transp,
-			 struct fb_info *info)
-{
-	struct au1100fb_info* i = (struct au1100fb_info *)info;
-	u32 rgbcol;
-
-	if (regno > 255)
-		return 1;
-
-	i->palette[regno].red    = red;
-	i->palette[regno].green  = green;
-	i->palette[regno].blue   = blue;
-
-	switch(p_lcd->bpp) {
-#ifdef FBCON_HAS_CFB8
-	case 8:
-		red >>= 10;
-		green >>= 10;
-		blue >>= 10;
-		p_lcd_reg->lcd_pallettebase[regno] = (blue&0x1f) |
-			((green&0x3f)<<5) | ((red&0x1f)<<11);
-		break;
-#endif
-#ifdef FBCON_HAS_CFB16
-	case 16:
-		i->fbcon_cmap16[regno] =
-			((red & 0xf800) >> 0) |
-			((green & 0xfc00) >> 5) |
-			((blue & 0xf800) >> 11);
-		break;
-#endif
-	default:
-		break;
+		palette = (u32*)fbi->pseudo_palette;
+
+		red   >>= (16 - fbi->var.red.length);
+		green >>= (16 - fbi->var.green.length);
+		blue  >>= (16 - fbi->var.blue.length);
+
+		value = (red   << fbi->var.red.offset) 	|
+			(green << fbi->var.green.offset)|
+			(blue  << fbi->var.blue.offset);
+		value &= 0xFFFF;
+
+	} else if (panel_is_active(fbdev->panel)) {
+		/* COLOR TFT PALLETTIZED (use RGB 565) */
+		value = (red & 0xF800)|((green >> 5) & 0x07E0)|((blue >> 11) & 0x001F);
+		value &= 0xFFFF;
+
+	} else if (panel_is_color(fbdev->panel)) {
+		/* COLOR STN MODE */
+		value = (((panel_swap_rgb(fbdev->panel) ? blue : red) >> 12) & 0x000F) |
+			((green >> 8) & 0x00F0) |
+			(((panel_swap_rgb(fbdev->panel) ? red : blue) >> 4) & 0x0F00);
+		value &= 0xFFF;
+	} else {
+		/* MONOCHROME MODE */
+		value = (green >> 12) & 0x000F;
+		value &= 0xF;
 	}
 
+	palette[regno] = value;
+
 	return 0;
 }
 
-
-static int  au1100_blank(int blank_mode, struct fb_info_gen *_info)
+/* fb_blank
+ * Blank the screen. Depending on the mode, the screen will be
+ * activated with the backlight color, or desactivated
+ */
+int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
 {
+	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+
+	print_dbg("fb_blank %d %p", blank_mode, fbi);
 
 	switch (blank_mode) {
+
 	case VESA_NO_BLANKING:
-		/* turn on panel */
-		//printk("turn on panel\n");
+			/* Turn on panel */
+			fbdev->regs->lcd_control |= LCD_CONTROL_GO;
 #ifdef CONFIG_MIPS_PB1100
-		p_lcd_reg->lcd_control |= LCD_CONTROL_GO;
-		au_writew(au_readw(PB1100_G_CONTROL) | p_lcd->mode_backlight,
+			if (drv_info.panel_idx == 1) {
+				au_writew(au_readw(PB1100_G_CONTROL)
+					  | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
 			PB1100_G_CONTROL);
-#endif
-#ifdef CONFIG_MIPS_HYDROGEN3
-		/*  Turn controller & power supply on,  GPIO213 */
-		au_writel(0x20002000, 0xB1700008);
-		au_writel(0x00040000, 0xB1900108);
-		au_writel(0x01000100, 0xB1700008);
+			}
 #endif
 		au_sync();
 		break;
@@ -332,12 +292,14 @@ static int  au1100_blank(int blank_mode, struct fb_info_gen *_info)
 	case VESA_VSYNC_SUSPEND:
 	case VESA_HSYNC_SUSPEND:
 	case VESA_POWERDOWN:
-		/* turn off panel */
-		//printk("turn off panel\n");
+			/* Turn off panel */
+			fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
 #ifdef CONFIG_MIPS_PB1100
-		au_writew(au_readw(PB1100_G_CONTROL) & ~p_lcd->mode_backlight,
+			if (drv_info.panel_idx == 1) {
+				au_writew(au_readw(PB1100_G_CONTROL)
+				  	  & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
 			PB1100_G_CONTROL);
-		p_lcd_reg->lcd_control &= ~LCD_CONTROL_GO;
+			}
 #endif
 		au_sync();
 		break;
@@ -348,49 +310,87 @@ static int  au1100_blank(int blank_mode, struct fb_info_gen *_info)
 	return 0;
 }
 
-static void au1100_set_disp(const void *unused, struct display *disp,
-			 struct fb_info_gen *info)
+/* fb_pan_display
+ * Pan display in x and/or y as specified
+ */
+int au1100fb_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
 {
-	disp->screen_base = (char *)fb_info.fb_virt_start;
-
-	switch (disp->var.bits_per_pixel) {
-#ifdef FBCON_HAS_CFB8
-	case 8:
-		disp->dispsw = &fbcon_cfb8;
-		if (fb_info.nohwcursor)
-			fbcon_cfb8.cursor = au1100_nocursor;
-		break;
-#endif
-#ifdef FBCON_HAS_CFB16
-	case 16:
-		disp->dispsw = &fbcon_cfb16;
-		disp->dispsw_data = fb_info.fbcon_cmap16;
-		if (fb_info.nohwcursor)
-			fbcon_cfb16.cursor = au1100_nocursor;
-		break;
-#endif
-	default:
-		disp->dispsw = &fbcon_dummy;
-		disp->dispsw_data = NULL;
-		break;
+	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+	int dy;
+
+	print_dbg("fb_pan_display %p %p", var, fbi);
+
+	if (!var || !fbdev) {
+		return -EINVAL;
+	}
+
+	if (var->xoffset - fbi->var.xoffset) {
+		/* No support for X panning for now! */
+		return -EINVAL;
+	}
+
+	print_dbg("fb_pan_display 2 %p %p", var, fbi);
+	dy = var->yoffset - fbi->var.yoffset;
+	if (dy) {
+
+		u32 dmaaddr;
+
+		print_dbg("Panning screen of %d lines", dy);
+
+		dmaaddr = fbdev->regs->lcd_dmaaddr0;
+		dmaaddr += (fbi->fix.line_length * dy);
+
+		/* TODO: Wait for current frame to finished */
+		fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(dmaaddr);
+
+		if (panel_is_dual(fbdev->panel)) {
+			dmaaddr = fbdev->regs->lcd_dmaaddr1;
+			dmaaddr += (fbi->fix.line_length * dy);
+			fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(dmaaddr);
+	}
+	}
+	print_dbg("fb_pan_display 3 %p %p", var, fbi);
+
+	return 0;
+}
+
+/* fb_rotate
+ * Rotate the display of this angle. This doesn't seems to be used by the core,
+ * but as our hardware supports it, so why not implementing it...
+ */
+void au1100fb_fb_rotate(struct fb_info *fbi, int angle)
+{
+	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+
+	print_dbg("fb_rotate %p %d", fbi, angle);
+
+	if (fbdev && (angle > 0) && !(angle % 90)) {
+
+		fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
+
+		fbdev->regs->lcd_control &= ~(LCD_CONTROL_SM_MASK);
+		fbdev->regs->lcd_control |= ((angle/90) << LCD_CONTROL_SM_BIT);
+
+		fbdev->regs->lcd_control |= LCD_CONTROL_GO;
 	}
 }
 
-static int
-au1100fb_mmap(struct fb_info *_fb,
-	     struct file *file,
-	     struct vm_area_struct *vma)
+/* fb_mmap
+ * Map video memory in user space. We don't use the generic fb_mmap method mainly
+ * to allow the use of the TLB streaming flag (CCA=6)
+ */
+int au1100fb_fb_mmap(struct fb_info *fbi, struct file *file, struct vm_area_struct *vma)
 {
+	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
 	unsigned int len;
 	unsigned long start=0, off;
-	struct au1100fb_info *fb = (struct au1100fb_info *)_fb;
 
 	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
 		return -EINVAL;
 	}
 
-	start = fb_info.fb_phys & PAGE_MASK;
-	len = PAGE_ALIGN((start & ~PAGE_MASK) + fb_info.fb_size);
+	start = fbdev->fb_phys & PAGE_MASK;
+	len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len);
 
 	off = vma->vm_pgoff << PAGE_SHIFT;
 
@@ -401,276 +401,309 @@ au1100fb_mmap(struct fb_info *_fb,
 	off += start;
 	vma->vm_pgoff = off >> PAGE_SHIFT;
 
-	pgprot_val(vma->vm_page_prot) &= ~_CACHE_MASK;
-	//pgprot_val(vma->vm_page_prot) |= _CACHE_CACHABLE_NONCOHERENT;
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 	pgprot_val(vma->vm_page_prot) |= (6 << 9); //CCA=6
 
-	/* This is an IO map - tell maydump to skip this VMA */
 	vma->vm_flags |= VM_IO;
 
-	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
+	if (io_remap_page_range(vma, vma->vm_start, off,
 				vma->vm_end - vma->vm_start,
 				vma->vm_page_prot)) {
 		return -EAGAIN;
 	}
 
-	fb->mmaped = 1;
 	return 0;
 }
 
-int au1100_pan_display(const struct fb_var_screeninfo *var,
-		       struct fb_info_gen *info)
+static struct fb_ops au1100fb_ops =
 {
-	return 0;
-}
+	.owner			= THIS_MODULE,
+	.fb_setcolreg		= au1100fb_fb_setcolreg,
+	.fb_blank		= au1100fb_fb_blank,
+	.fb_pan_display		= au1100fb_fb_pan_display,
+	.fb_fillrect		= cfb_fillrect,
+	.fb_copyarea		= cfb_copyarea,
+	.fb_imageblit		= cfb_imageblit,
+	.fb_rotate		= au1100fb_fb_rotate,
+	.fb_mmap		= au1100fb_fb_mmap,
+};
 
-static int au1100fb_ioctl(struct inode *inode, struct file *file, u_int cmd,
-			  u_long arg, int con, struct fb_info *info)
-{
-	/* nothing to do yet */
-	return -EINVAL;
-}
 
-static struct fbgen_hwswitch au1100_switch = {
-	au1100_detect,
-	au1100_encode_fix,
-	au1100_decode_var,
-	au1100_encode_var,
-	au1100_get_par,
-	au1100_set_par,
-	au1100_getcolreg,
-	au1100_setcolreg,
-	au1100_pan_display,
-	au1100_blank,
-	au1100_set_disp
-};
+/*-------------------------------------------------------------------------*/
 
+/* AU1100 LCD controller device driver */
 
-int au1100_setmode(void)
+int au1100fb_drv_probe(struct device *dev)
 {
-	int words;
-
-	/* FIXME Need to accomodate for swivel mode and 12bpp, <8bpp*/
-	switch (p_lcd->mode_control & LCD_CONTROL_SM)
-	{
-		case LCD_CONTROL_SM_0:
-		case LCD_CONTROL_SM_180:
-		words = (p_lcd->xres * p_lcd->yres * p_lcd->bpp) / 32;
-			break;
-		case LCD_CONTROL_SM_90:
-		case LCD_CONTROL_SM_270:
-			/* is this correct? */
-		words = (p_lcd->xres * p_lcd->bpp) / 8;
-			break;
-		default:
-			printk("mode_control reg not initialized\n");
+	struct au1100fb_device *fbdev = NULL;
+	struct resource *regs_res;
+	unsigned long page;
+	u32 sys_clksrc;
+
+	if (!dev)
 			return -EINVAL;
+
+	/* Allocate new device private */
+	if (!(fbdev = kmalloc(sizeof(struct au1100fb_device), GFP_KERNEL))) {
+		print_err("fail to allocate device private record");
+		return -ENOMEM;
 	}
+	memset((void*)fbdev, 0, sizeof(struct au1100fb_device));
 
-	/*
-	 * Setup LCD controller
-	 */
+	fbdev->panel = &known_lcd_panels[drv_info.panel_idx];
 
-	p_lcd_reg->lcd_control = p_lcd->mode_control;
-	p_lcd_reg->lcd_intstatus = 0;
-	p_lcd_reg->lcd_intenable = 0;
-	p_lcd_reg->lcd_horztiming = p_lcd->mode_horztiming;
-	p_lcd_reg->lcd_verttiming = p_lcd->mode_verttiming;
-	p_lcd_reg->lcd_clkcontrol = p_lcd->mode_clkcontrol;
-	p_lcd_reg->lcd_words = words - 1;
-	p_lcd_reg->lcd_dmaaddr0 = fb_info.fb_phys;
+	dev_set_drvdata(dev, (void*)fbdev);
 
-	/* turn on panel */
-#ifdef CONFIG_MIPS_PB1100
-	au_writew(au_readw(PB1100_G_CONTROL) | p_lcd->mode_backlight,
-			PB1100_G_CONTROL);
-#endif
-#ifdef CONFIG_MIPS_HYDROGEN3
-	/*  Turn controller & power supply on,  GPIO213 */
-	au_writel(0x20002000, 0xB1700008);
-	au_writel(0x00040000, 0xB1900108);
-	au_writel(0x01000100, 0xB1700008);
-#endif
+	/* Allocate region for our registers and map them */
+	if (!(regs_res = platform_get_resource(to_platform_device(dev),
+					IORESOURCE_MEM, 0))) {
+		print_err("fail to retrieve registers resource");
+		return -EFAULT;
+	}
 
-	p_lcd_reg->lcd_control |= LCD_CONTROL_GO;
+	au1100fb_fix.mmio_start = regs_res->start;
+	au1100fb_fix.mmio_len = regs_res->end - regs_res->start + 1;
 
-	return 0;
-}
+	if (!request_mem_region(au1100fb_fix.mmio_start, au1100fb_fix.mmio_len,
+				DRIVER_NAME)) {
+		print_err("fail to lock memory region at 0x%08x",
+				au1100fb_fix.mmio_start);
+		return -EBUSY;
+	}
 
+	fbdev->regs = (struct au1100fb_regs*)KSEG1ADDR(au1100fb_fix.mmio_start);
 
-int __init au1100fb_init(void)
-{
-	uint32 sys_clksrc;
-	unsigned long page;
+	print_dbg("Register memory map at %p", fbdev->regs);
+	print_dbg("phys=0x%08x, size=%d", fbdev->regs_phys, fbdev->regs_len);
 
-	/*
-	* Get the panel information/display mode and update the registry
-	*/
-	p_lcd = &panels[my_lcd_index];
-
-	switch (p_lcd->mode_control & LCD_CONTROL_SM)
-	{
-		case LCD_CONTROL_SM_0:
-		case LCD_CONTROL_SM_180:
-		p_lcd->xres =
-			(p_lcd->mode_horztiming & LCD_HORZTIMING_PPL) + 1;
-		p_lcd->yres =
-			(p_lcd->mode_verttiming & LCD_VERTTIMING_LPP) + 1;
-			break;
-		case LCD_CONTROL_SM_90:
-		case LCD_CONTROL_SM_270:
-		p_lcd->yres =
-			(p_lcd->mode_horztiming & LCD_HORZTIMING_PPL) + 1;
-		p_lcd->xres =
-			(p_lcd->mode_verttiming & LCD_VERTTIMING_LPP) + 1;
-			break;
-	}
 
-	/*
-	 * Panel dimensions x bpp must be divisible by 32
-	 */
-	if (((p_lcd->yres * p_lcd->bpp) % 32) != 0)
-		printk("VERT %% 32\n");
-	if (((p_lcd->xres * p_lcd->bpp) % 32) != 0)
-		printk("HORZ %% 32\n");
 
-	/*
-	 * Allocate LCD framebuffer from system memory
-	 */
-	fb_info.fb_size = (p_lcd->xres * p_lcd->yres * p_lcd->bpp) / 8;
-
-	current_par.var.xres = p_lcd->xres;
-	current_par.var.xres_virtual = p_lcd->xres;
-	current_par.var.yres = p_lcd->yres;
-	current_par.var.yres_virtual = p_lcd->yres;
-	current_par.var.bits_per_pixel = p_lcd->bpp;
-
-	/* FIX!!! only works for 8/16 bpp */
-	current_par.line_length = p_lcd->xres * p_lcd->bpp / 8; /* in bytes */
-	fb_info.fb_virt_start = (unsigned long )
-		__get_free_pages(GFP_ATOMIC | GFP_DMA,
-				get_order(fb_info.fb_size + 0x1000));
-	if (!fb_info.fb_virt_start) {
-		printk("Unable to allocate fb memory\n");
+	/* Allocate the framebuffer to the maximum screen size * nbr of video buffers */
+	fbdev->fb_len = fbdev->panel->xres * fbdev->panel->yres *
+		  	(fbdev->panel->bpp >> 3) * AU1100FB_NBR_VIDEO_BUFFERS;
+
+	fbdev->fb_mem = dma_alloc_coherent(dev, PAGE_ALIGN(fbdev->fb_len),
+					&fbdev->fb_phys, GFP_KERNEL);
+	if (!fbdev->fb_mem) {
+		print_err("fail to allocate frambuffer (size: %dK))",
+			  fbdev->fb_len / 1024);
 		return -ENOMEM;
 	}
-	fb_info.fb_phys = virt_to_bus((void *)fb_info.fb_virt_start);
+
+	au1100fb_fix.smem_start = fbdev->fb_phys;
+	au1100fb_fix.smem_len = fbdev->fb_len;
 
 	/*
 	 * Set page reserved so that mmap will work. This is necessary
 	 * since we'll be remapping normal memory.
 	 */
-	for (page = fb_info.fb_virt_start;
-	     page < PAGE_ALIGN(fb_info.fb_virt_start + fb_info.fb_size);
+	for (page = (unsigned long)fbdev->fb_mem;
+	     page < PAGE_ALIGN((unsigned long)fbdev->fb_mem + fbdev->fb_len);
 	     page += PAGE_SIZE) {
+#if CONFIG_DMA_NONCOHERENT
+		SetPageReserved(virt_to_page(CAC_ADDR(page)));
+#else
 		SetPageReserved(virt_to_page(page));
+#endif
 	}
 
-	memset((void *)fb_info.fb_virt_start, 0, fb_info.fb_size);
-
-	/* set freqctrl now to allow more time to stabilize */
-	/* zero-out out LCD bits */
-	sys_clksrc = au_readl(SYS_CLKSRC) & ~0x000003e0;
-	sys_clksrc |= p_lcd->mode_toyclksrc;
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	/* FIXME add check to make sure auxpll is what is expected! */
-	au1100_setmode();
-
-	fb_info.gen.parsize = sizeof(struct au1100fb_par);
-	fb_info.gen.fbhw = &au1100_switch;
-
-	strcpy(fb_info.gen.info.modename, "Au1100 LCD");
-	fb_info.gen.info.changevar = NULL;
-	fb_info.gen.info.node = -1;
-
-	fb_info.gen.info.fbops = &au1100fb_ops;
-	fb_info.gen.info.disp = &disp;
-	fb_info.gen.info.switch_con = &fbgen_switch;
-	fb_info.gen.info.updatevar = &fbgen_update_var;
-	fb_info.gen.info.blank = &fbgen_blank;
-	fb_info.gen.info.flags = FBINFO_FLAG_DEFAULT;
-
-	/* This should give a reasonable default video mode */
-	fbgen_get_var(&disp.var, -1, &fb_info.gen.info);
-	fbgen_do_set_var(&disp.var, 1, &fb_info.gen);
-	fbgen_set_disp(-1, &fb_info.gen);
-	fbgen_install_cmap(0, &fb_info.gen);
-	if (register_framebuffer(&fb_info.gen.info) < 0)
-		return -EINVAL;
-	printk(KERN_INFO "fb%d: %s frame buffer device\n",
-			GET_FB_IDX(fb_info.gen.info.node),
-			fb_info.gen.info.modename);
+	print_dbg("Framebuffer memory map at %p", fbdev->fb_mem);
+	print_dbg("phys=0x%08x, size=%dK", fbdev->fb_phys, fbdev->fb_len / 1024);
+
+	/* Setup LCD clock to AUX (48 MHz) */
+	sys_clksrc = au_readl(SYS_CLKSRC) & ~(SYS_CS_ML_MASK | SYS_CS_DL | SYS_CS_CL);
+	au_writel((sys_clksrc | (1 << SYS_CS_ML_BIT)), SYS_CLKSRC);
+
+	/* load the panel info into the var struct */
+	au1100fb_var.bits_per_pixel = fbdev->panel->bpp;
+	au1100fb_var.xres = fbdev->panel->xres;
+	au1100fb_var.xres_virtual = au1100fb_var.xres;
+	au1100fb_var.yres = fbdev->panel->yres;
+	au1100fb_var.yres_virtual = au1100fb_var.yres;
+
+	fbdev->info.screen_base = fbdev->fb_mem;
+	fbdev->info.fbops = &au1100fb_ops;
+	fbdev->info.fix = au1100fb_fix;
+
+	if (!(fbdev->info.pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL))) {
+		return -ENOMEM;
+	}
+	memset(fbdev->info.pseudo_palette, 0, sizeof(u32) * 16);
+
+	if (fb_alloc_cmap(&fbdev->info.cmap, AU1100_LCD_NBR_PALETTE_ENTRIES, 0) < 0) {
+		print_err("Fail to allocate colormap (%d entries)",
+			   AU1100_LCD_NBR_PALETTE_ENTRIES);
+		kfree(fbdev->info.pseudo_palette);
+		return -EFAULT;
+	}
+
+	fbdev->info.var = au1100fb_var;
+
+	/* Set h/w registers */
+	au1100fb_setmode(fbdev);
+
+	/* Register new framebuffer */
+	if (register_framebuffer(&fbdev->info) < 0) {
+		print_err("cannot register new framebuffer");
+		goto failed;
+	}
+
+	return 0;
+
+failed:
+	if (fbdev->regs) {
+		release_mem_region(fbdev->regs_phys, fbdev->regs_len);
+	}
+	if (fbdev->fb_mem) {
+		dma_free_noncoherent(dev, fbdev->fb_len, fbdev->fb_mem, fbdev->fb_phys);
+	}
+	if (fbdev->info.cmap.len != 0) {
+		fb_dealloc_cmap(&fbdev->info.cmap);
+	}
+	kfree(fbdev);
+	dev_set_drvdata(dev, NULL);
 
 	return 0;
 }
 
+int au1100fb_drv_remove(struct device *dev)
+{
+	struct au1100fb_device *fbdev = NULL;
+
+	if (!dev)
+		return -ENODEV;
+
+	fbdev = (struct au1100fb_device*) dev_get_drvdata(dev);
+
+#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
+	au1100fb_fb_blank(VESA_POWERDOWN, &fbdev->info);
+#endif
+	fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
 
-void au1100fb_cleanup(struct fb_info *info)
+	/* Clean up all probe data */
+	unregister_framebuffer(&fbdev->info);
+
+	release_mem_region(fbdev->regs_phys, fbdev->regs_len);
+
+	dma_free_coherent(dev, PAGE_ALIGN(fbdev->fb_len), fbdev->fb_mem, fbdev->fb_phys);
+
+	fb_dealloc_cmap(&fbdev->info.cmap);
+	kfree(fbdev->info.pseudo_palette);
+	kfree((void*)fbdev);
+
+	return 0;
+}
+
+int au1100fb_drv_suspend(struct device *dev, u32 state, u32 level)
+{
+	/* TODO */
+	return 0;
+}
+
+int au1100fb_drv_resume(struct device *dev, u32 level)
 {
-	unregister_framebuffer(info);
+	/* TODO */
+	return 0;
 }
 
+static struct device_driver au1100fb_driver = {
+	.name		= "au1100-lcd",
+	.bus		= &platform_bus_type,
 
-void au1100fb_setup(char *options, int *ints)
+	.probe		= au1100fb_drv_probe,
+        .remove		= au1100fb_drv_remove,
+	.suspend	= au1100fb_drv_suspend,
+        .resume		= au1100fb_drv_resume,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Kernel driver */
+
+int au1100fb_setup(char *options)
 {
 	char* this_opt;
-	int i;
-	int num_panels = sizeof(panels)/sizeof(struct known_lcd_panels);
+	int num_panels = ARRAY_SIZE(known_lcd_panels);
+	char* mode = NULL;
+	int panel_idx = 0;
 
+	if (num_panels <= 0) {
+		print_err("No LCD panels supported by driver!");
+		return -EFAULT;
+			}
 
-	if (!options || !*options)
-		return;
-
-	for(this_opt=strtok(options, ","); this_opt;
-	    this_opt=strtok(NULL, ",")) {
+	if (options) {
+		while ((this_opt = strsep(&options,",")) != NULL) {
+			/* Panel option */
 		if (!strncmp(this_opt, "panel:", 6)) {
-#if defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100)
-			/* Read Pb1100 Switch S10 ? */
-			if (!strncmp(this_opt+6, "s10", 3))
-			{
-				int panel;
-				panel = *(volatile int *)0xAE000008; /* BCSR SWITCHES */
-				panel >>= 8;
-				panel &= 0x0F;
-				if (panel >= num_panels) panel = 0;
-				my_lcd_index = panel;
-			}
-			else
-#endif
-			/* Get the panel name, everything else if fixed */
-			for (i=0; i<num_panels; i++) {
-				if (!strncmp(this_opt+6, panels[i].panel_name,
+				int i;
+				this_opt += 6;
+				for (i = 0; i < num_panels; i++) {
+					if (!strncmp(this_opt,
+					      	     known_lcd_panels[i].name,
 							strlen(this_opt))) {
-					my_lcd_index = i;
+						panel_idx = i;
 					break;
 				}
 			}
+				if (i >= num_panels) {
+ 					print_warn("Panel %s not supported!", this_opt);
+				}
+			}
+			/* Mode option (only option that start with digit) */
+			else if (isdigit(this_opt[0])) {
+				mode = kmalloc(strlen(this_opt) + 1, GFP_KERNEL);
+				strncpy(mode, this_opt, strlen(this_opt) + 1);
+			}
+			/* Unsupported option */
+			else {
+				print_warn("Unsupported option \"%s\"", this_opt);
 		}
-		else if (!strncmp(this_opt, "nohwcursor", 10)) {
-			printk("nohwcursor\n");
-			fb_info.nohwcursor = 1;
 		}
 	}
 
-	printk("au1100fb: Panel %d %s\n", my_lcd_index,
-		panels[my_lcd_index].panel_name);
-}
+	drv_info.panel_idx = panel_idx;
+	drv_info.opt_mode = mode;
 
+	print_info("Panel=%s Mode=%s",
+			known_lcd_panels[drv_info.panel_idx].name,
+		      	drv_info.opt_mode ? drv_info.opt_mode : "default");
 
+	return 0;
+}
 
-#ifdef MODULE
-MODULE_LICENSE("GPL");
-int init_module(void)
+int __init au1100fb_init(void)
 {
-	return au1100fb_init();
+	char* options;
+	int ret;
+
+	print_info("" DRIVER_DESC "");
+
+	memset(&drv_info, 0, sizeof(drv_info));
+
+	if (fb_get_options(DRIVER_NAME, &options))
+		return -ENODEV;
+
+	/* Setup driver with options */
+	ret = au1100fb_setup(options);
+	if (ret < 0) {
+		print_err("Fail to setup driver");
+		return ret;
+	}
+
+	return driver_register(&au1100fb_driver);
 }
 
-void cleanup_module(void)
+void __exit au1100fb_cleanup(void)
 {
-	au1100fb_cleanup(void);
+	driver_unregister(&au1100fb_driver);
+
+	if (drv_info.opt_mode)
+		kfree(drv_info.opt_mode);
 }
 
-MODULE_AUTHOR("Pete Popov <ppopov@mvista.com>");
-MODULE_DESCRIPTION("Au1100 LCD framebuffer device driver");
-#endif /* MODULE */
+module_init(au1100fb_init);
+module_exit(au1100fb_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/au1100fb.h b/drivers/video/au1100fb.h
index 657c560ab73c..2855534dc235 100644
--- a/drivers/video/au1100fb.h
+++ b/drivers/video/au1100fb.h
@@ -30,352 +30,352 @@
 #ifndef _AU1100LCD_H
 #define _AU1100LCD_H
 
+#include <asm/mach-au1x00/au1000.h>
+
+#define print_err(f, arg...) printk(KERN_ERR DRIVER_NAME ": " f "\n", ## arg)
+#define print_warn(f, arg...) printk(KERN_WARNING DRIVER_NAME ": " f "\n", ## arg)
+#define print_info(f, arg...) printk(KERN_INFO DRIVER_NAME ": " f "\n", ## arg)
+
+#if DEBUG
+#define print_dbg(f, arg...) printk(__FILE__ ": " f "\n", ## arg)
+#else
+#define print_dbg(f, arg...) do {} while (0)
+#endif
+
+#if defined(__BIG_ENDIAN)
+#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_11
+#else
+#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_00
+#endif
+#define LCD_CONTROL_DEFAULT_SBPPF LCD_CONTROL_SBPPF_565
+
 /********************************************************************/
-#define uint32 unsigned long
-typedef volatile struct
-{
-	uint32	lcd_control;
-	uint32	lcd_intstatus;
-	uint32	lcd_intenable;
-	uint32	lcd_horztiming;
-	uint32	lcd_verttiming;
-	uint32	lcd_clkcontrol;
-	uint32	lcd_dmaaddr0;
-	uint32	lcd_dmaaddr1;
-	uint32	lcd_words;
-	uint32	lcd_pwmdiv;
-	uint32	lcd_pwmhi;
-	uint32	reserved[(0x0400-0x002C)/4];
-	uint32	lcd_pallettebase[256];
-
-} AU1100_LCD;
+
+/* LCD controller restrictions */
+#define AU1100_LCD_MAX_XRES	800
+#define AU1100_LCD_MAX_YRES	600
+#define AU1100_LCD_MAX_BPP	16
+#define AU1100_LCD_MAX_CLK	48000000
+#define AU1100_LCD_NBR_PALETTE_ENTRIES 256
+
+/* Default number of visible screen buffer to allocate */
+#define AU1100FB_NBR_VIDEO_BUFFERS 4
 
 /********************************************************************/
 
-#define AU1100_LCD_ADDR		0xB5000000
+struct au1100fb_panel
+{
+	const char name[25];		/* Full name <vendor>_<model> */
 
-/*
- * Register bit definitions
- */
+	u32   	control_base;		/* Mode-independent control values */
+	u32	clkcontrol_base;	/* Panel pixclock preferences */
 
-/* lcd_control */
-#define LCD_CONTROL_SBPPF		(7<<18)
-#define LCD_CONTROL_SBPPF_655	(0<<18)
-#define LCD_CONTROL_SBPPF_565	(1<<18)
-#define LCD_CONTROL_SBPPF_556	(2<<18)
-#define LCD_CONTROL_SBPPF_1555	(3<<18)
-#define LCD_CONTROL_SBPPF_5551	(4<<18)
-#define LCD_CONTROL_WP			(1<<17)
-#define LCD_CONTROL_WD			(1<<16)
-#define LCD_CONTROL_C			(1<<15)
-#define LCD_CONTROL_SM			(3<<13)
-#define LCD_CONTROL_SM_0		(0<<13)
-#define LCD_CONTROL_SM_90		(1<<13)
-#define LCD_CONTROL_SM_180		(2<<13)
-#define LCD_CONTROL_SM_270		(3<<13)
-#define LCD_CONTROL_DB			(1<<12)
-#define LCD_CONTROL_CCO			(1<<11)
-#define LCD_CONTROL_DP			(1<<10)
-#define LCD_CONTROL_PO			(3<<8)
-#define LCD_CONTROL_PO_00		(0<<8)
-#define LCD_CONTROL_PO_01		(1<<8)
-#define LCD_CONTROL_PO_10		(2<<8)
-#define LCD_CONTROL_PO_11		(3<<8)
-#define LCD_CONTROL_MPI			(1<<7)
-#define LCD_CONTROL_PT			(1<<6)
-#define LCD_CONTROL_PC			(1<<5)
-#define LCD_CONTROL_BPP			(7<<1)
-#define LCD_CONTROL_BPP_1		(0<<1)
-#define LCD_CONTROL_BPP_2		(1<<1)
-#define LCD_CONTROL_BPP_4		(2<<1)
-#define LCD_CONTROL_BPP_8		(3<<1)
-#define LCD_CONTROL_BPP_12		(4<<1)
-#define LCD_CONTROL_BPP_16		(5<<1)
-#define LCD_CONTROL_GO			(1<<0)
-
-/* lcd_intstatus, lcd_intenable */
-#define LCD_INT_SD				(1<<7)
-#define LCD_INT_OF				(1<<6)
-#define LCD_INT_UF				(1<<5)
-#define LCD_INT_SA				(1<<3)
-#define LCD_INT_SS				(1<<2)
-#define LCD_INT_S1				(1<<1)
-#define LCD_INT_S0				(1<<0)
-
-/* lcd_horztiming */
-#define LCD_HORZTIMING_HN2		(255<<24)
-#define LCD_HORZTIMING_HN2_N(N)	(((N)-1)<<24)
-#define LCD_HORZTIMING_HN1		(255<<16)
-#define LCD_HORZTIMING_HN1_N(N)	(((N)-1)<<16)
-#define LCD_HORZTIMING_HPW		(63<<10)
-#define LCD_HORZTIMING_HPW_N(N)	(((N)-1)<<10)
-#define LCD_HORZTIMING_PPL		(1023<<0)
-#define LCD_HORZTIMING_PPL_N(N)	(((N)-1)<<0)
-
-/* lcd_verttiming */
-#define LCD_VERTTIMING_VN2		(255<<24)
-#define LCD_VERTTIMING_VN2_N(N)	(((N)-1)<<24)
-#define LCD_VERTTIMING_VN1		(255<<16)
-#define LCD_VERTTIMING_VN1_N(N)	(((N)-1)<<16)
-#define LCD_VERTTIMING_VPW		(63<<10)
-#define LCD_VERTTIMING_VPW_N(N)	(((N)-1)<<10)
-#define LCD_VERTTIMING_LPP		(1023<<0)
-#define LCD_VERTTIMING_LPP_N(N)	(((N)-1)<<0)
-
-/* lcd_clkcontrol */
-#define LCD_CLKCONTROL_IB		(1<<18)
-#define LCD_CLKCONTROL_IC		(1<<17)
-#define LCD_CLKCONTROL_IH		(1<<16)
-#define LCD_CLKCONTROL_IV		(1<<15)
-#define LCD_CLKCONTROL_BF		(31<<10)
-#define LCD_CLKCONTROL_BF_N(N)	(((N)-1)<<10)
-#define LCD_CLKCONTROL_PCD		(1023<<0)
-#define LCD_CLKCONTROL_PCD_N(N)	((N)<<0)
-
-/* lcd_pwmdiv */
-#define LCD_PWMDIV_EN			(1<<12)
-#define LCD_PWMDIV_PWMDIV		(2047<<0)
-#define LCD_PWMDIV_PWMDIV_N(N)	(((N)-1)<<0)
-
-/* lcd_pwmhi */
-#define LCD_PWMHI_PWMHI1		(2047<<12)
-#define LCD_PWMHI_PWMHI1_N(N)	((N)<<12)
-#define LCD_PWMHI_PWMHI0		(2047<<0)
-#define LCD_PWMHI_PWMHI0_N(N)	((N)<<0)
-
-/* lcd_pallettebase - MONOCHROME */
-#define LCD_PALLETTE_MONO_MI		(15<<0)
-#define LCD_PALLETTE_MONO_MI_N(N)	((N)<<0)
-
-/* lcd_pallettebase - COLOR */
-#define LCD_PALLETTE_COLOR_BI		(15<<8)
-#define LCD_PALLETTE_COLOR_BI_N(N)	((N)<<8)
-#define LCD_PALLETTE_COLOR_GI		(15<<4)
-#define LCD_PALLETTE_COLOR_GI_N(N)	((N)<<4)
-#define LCD_PALLETTE_COLOR_RI		(15<<0)
-#define LCD_PALLETTE_COLOR_RI_N(N)	((N)<<0)
-
-/* lcd_palletebase - COLOR TFT PALLETIZED */
-#define LCD_PALLETTE_TFT_DC			(65535<<0)
-#define LCD_PALLETTE_TFT_DC_N(N)	((N)<<0)
+	u32	horztiming;
+	u32	verttiming;
 
-/********************************************************************/
+	u32	xres;		/* Maximum horizontal resolution */
+	u32 	yres;		/* Maximum vertical resolution */
+	u32 	bpp;		/* Maximum depth supported */
+};
 
-struct known_lcd_panels
+struct au1100fb_regs
 {
-	uint32 xres;
-	uint32 yres;
-	uint32 bpp;
-	unsigned char  panel_name[256];
-	uint32 mode_control;
-	uint32 mode_horztiming;
-	uint32 mode_verttiming;
-	uint32 mode_clkcontrol;
-	uint32 mode_pwmdiv;
-	uint32 mode_pwmhi;
-	uint32 mode_toyclksrc;
-	uint32 mode_backlight;
+	u32  lcd_control;
+	u32  lcd_intstatus;
+	u32  lcd_intenable;
+	u32  lcd_horztiming;
+	u32  lcd_verttiming;
+	u32  lcd_clkcontrol;
+	u32  lcd_dmaaddr0;
+	u32  lcd_dmaaddr1;
+	u32  lcd_words;
+	u32  lcd_pwmdiv;
+	u32  lcd_pwmhi;
+	u32  reserved[(0x0400-0x002C)/4];
+	u32  lcd_pallettebase[256];
+};
+
+struct au1100fb_device {
+
+	struct fb_info info;			/* FB driver info record */
 
+	struct au1100fb_panel 	*panel;		/* Panel connected to this device */
+
+	struct au1100fb_regs* 	regs;		/* Registers memory map */
+	size_t       		regs_len;
+	unsigned int 		regs_phys;
+
+	unsigned char* 		fb_mem;		/* FrameBuffer memory map */
+	size_t	      		fb_len;
+	dma_addr_t    		fb_phys;
 };
 
-#if defined(__BIG_ENDIAN)
-#define LCD_DEFAULT_PIX_FORMAT LCD_CONTROL_PO_11
-#else
-#define LCD_DEFAULT_PIX_FORMAT LCD_CONTROL_PO_00
-#endif
+/********************************************************************/
 
-/*
- * The fb driver assumes that AUX PLL is at 48MHz.  That can
- * cover up to 800x600 resolution; if you need higher resolution,
- * you should modify the driver as needed, not just this structure.
+#define LCD_CONTROL                (AU1100_LCD_BASE + 0x0)
+  #define LCD_CONTROL_SBB_BIT      21
+  #define LCD_CONTROL_SBB_MASK     (0x3 << LCD_CONTROL_SBB_BIT)
+    #define LCD_CONTROL_SBB_1        (0 << LCD_CONTROL_SBB_BIT)
+    #define LCD_CONTROL_SBB_2        (1 << LCD_CONTROL_SBB_BIT)
+    #define LCD_CONTROL_SBB_3        (2 << LCD_CONTROL_SBB_BIT)
+    #define LCD_CONTROL_SBB_4        (3 << LCD_CONTROL_SBB_BIT)
+  #define LCD_CONTROL_SBPPF_BIT    18
+  #define LCD_CONTROL_SBPPF_MASK   (0x7 << LCD_CONTROL_SBPPF_BIT)
+    #define LCD_CONTROL_SBPPF_655    (0 << LCD_CONTROL_SBPPF_BIT)
+    #define LCD_CONTROL_SBPPF_565    (1 << LCD_CONTROL_SBPPF_BIT)
+    #define LCD_CONTROL_SBPPF_556    (2 << LCD_CONTROL_SBPPF_BIT)
+    #define LCD_CONTROL_SBPPF_1555   (3 << LCD_CONTROL_SBPPF_BIT)
+    #define LCD_CONTROL_SBPPF_5551   (4 << LCD_CONTROL_SBPPF_BIT)
+  #define LCD_CONTROL_WP           (1<<17)
+  #define LCD_CONTROL_WD           (1<<16)
+  #define LCD_CONTROL_C            (1<<15)
+  #define LCD_CONTROL_SM_BIT       13
+  #define LCD_CONTROL_SM_MASK      (0x3 << LCD_CONTROL_SM_BIT)
+    #define LCD_CONTROL_SM_0         (0 << LCD_CONTROL_SM_BIT)
+    #define LCD_CONTROL_SM_90        (1 << LCD_CONTROL_SM_BIT)
+    #define LCD_CONTROL_SM_180       (2 << LCD_CONTROL_SM_BIT)
+    #define LCD_CONTROL_SM_270       (3 << LCD_CONTROL_SM_BIT)
+  #define LCD_CONTROL_DB           (1<<12)
+  #define LCD_CONTROL_CCO          (1<<11)
+  #define LCD_CONTROL_DP           (1<<10)
+  #define LCD_CONTROL_PO_BIT       8
+  #define LCD_CONTROL_PO_MASK      (0x3 << LCD_CONTROL_PO_BIT)
+    #define LCD_CONTROL_PO_00        (0 << LCD_CONTROL_PO_BIT)
+    #define LCD_CONTROL_PO_01        (1 << LCD_CONTROL_PO_BIT)
+    #define LCD_CONTROL_PO_10        (2 << LCD_CONTROL_PO_BIT)
+    #define LCD_CONTROL_PO_11        (3 << LCD_CONTROL_PO_BIT)
+  #define LCD_CONTROL_MPI          (1<<7)
+  #define LCD_CONTROL_PT           (1<<6)
+  #define LCD_CONTROL_PC           (1<<5)
+  #define LCD_CONTROL_BPP_BIT      1
+  #define LCD_CONTROL_BPP_MASK     (0x7 << LCD_CONTROL_BPP_BIT)
+    #define LCD_CONTROL_BPP_1        (0 << LCD_CONTROL_BPP_BIT)
+    #define LCD_CONTROL_BPP_2        (1 << LCD_CONTROL_BPP_BIT)
+    #define LCD_CONTROL_BPP_4        (2 << LCD_CONTROL_BPP_BIT)
+    #define LCD_CONTROL_BPP_8        (3 << LCD_CONTROL_BPP_BIT)
+    #define LCD_CONTROL_BPP_12       (4 << LCD_CONTROL_BPP_BIT)
+    #define LCD_CONTROL_BPP_16       (5 << LCD_CONTROL_BPP_BIT)
+  #define LCD_CONTROL_GO           (1<<0)
+
+#define LCD_INTSTATUS              (AU1100_LCD_BASE + 0x4)
+#define LCD_INTENABLE              (AU1100_LCD_BASE + 0x8)
+  #define LCD_INT_SD               (1<<7)
+  #define LCD_INT_OF               (1<<6)
+  #define LCD_INT_UF               (1<<5)
+  #define LCD_INT_SA               (1<<3)
+  #define LCD_INT_SS               (1<<2)
+  #define LCD_INT_S1               (1<<1)
+  #define LCD_INT_S0               (1<<0)
+
+#define LCD_HORZTIMING             (AU1100_LCD_BASE + 0xC)
+  #define LCD_HORZTIMING_HN2_BIT   24
+  #define LCD_HORZTIMING_HN2_MASK  (0xFF << LCD_HORZTIMING_HN2_BIT)
+  #define LCD_HORZTIMING_HN2_N(N)  ((((N)-1) << LCD_HORZTIMING_HN2_BIT) & LCD_HORZTIMING_HN2_MASK)
+  #define LCD_HORZTIMING_HN1_BIT   16
+  #define LCD_HORZTIMING_HN1_MASK  (0xFF << LCD_HORZTIMING_HN1_BIT)
+  #define LCD_HORZTIMING_HN1_N(N)  ((((N)-1) << LCD_HORZTIMING_HN1_BIT) & LCD_HORZTIMING_HN1_MASK)
+  #define LCD_HORZTIMING_HPW_BIT   10
+  #define LCD_HORZTIMING_HPW_MASK  (0x3F << LCD_HORZTIMING_HPW_BIT)
+  #define LCD_HORZTIMING_HPW_N(N)  ((((N)-1) << LCD_HORZTIMING_HPW_BIT) & LCD_HORZTIMING_HPW_MASK)
+  #define LCD_HORZTIMING_PPL_BIT   0
+  #define LCD_HORZTIMING_PPL_MASK  (0x3FF << LCD_HORZTIMING_PPL_BIT)
+  #define LCD_HORZTIMING_PPL_N(N)  ((((N)-1) << LCD_HORZTIMING_PPL_BIT) & LCD_HORZTIMING_PPL_MASK)
+
+#define LCD_VERTTIMING             (AU1100_LCD_BASE + 0x10)
+  #define LCD_VERTTIMING_VN2_BIT   24
+  #define LCD_VERTTIMING_VN2_MASK  (0xFF << LCD_VERTTIMING_VN2_BIT)
+  #define LCD_VERTTIMING_VN2_N(N)  ((((N)-1) << LCD_VERTTIMING_VN2_BIT) & LCD_VERTTIMING_VN2_MASK)
+  #define LCD_VERTTIMING_VN1_BIT   16
+  #define LCD_VERTTIMING_VN1_MASK  (0xFF << LCD_VERTTIMING_VN1_BIT)
+  #define LCD_VERTTIMING_VN1_N(N)  ((((N)-1) << LCD_VERTTIMING_VN1_BIT) & LCD_VERTTIMING_VN1_MASK)
+  #define LCD_VERTTIMING_VPW_BIT   10
+  #define LCD_VERTTIMING_VPW_MASK  (0x3F << LCD_VERTTIMING_VPW_BIT)
+  #define LCD_VERTTIMING_VPW_N(N)  ((((N)-1) << LCD_VERTTIMING_VPW_BIT) & LCD_VERTTIMING_VPW_MASK)
+  #define LCD_VERTTIMING_LPP_BIT   0
+  #define LCD_VERTTIMING_LPP_MASK  (0x3FF << LCD_VERTTIMING_LPP_BIT)
+  #define LCD_VERTTIMING_LPP_N(N)  ((((N)-1) << LCD_VERTTIMING_LPP_BIT) & LCD_VERTTIMING_LPP_MASK)
+
+#define LCD_CLKCONTROL             (AU1100_LCD_BASE + 0x14)
+  #define LCD_CLKCONTROL_IB        (1<<18)
+  #define LCD_CLKCONTROL_IC        (1<<17)
+  #define LCD_CLKCONTROL_IH        (1<<16)
+  #define LCD_CLKCONTROL_IV        (1<<15)
+  #define LCD_CLKCONTROL_BF_BIT    10
+  #define LCD_CLKCONTROL_BF_MASK   (0x1F << LCD_CLKCONTROL_BF_BIT)
+  #define LCD_CLKCONTROL_BF_N(N)   ((((N)-1) << LCD_CLKCONTROL_BF_BIT) & LCD_CLKCONTROL_BF_MASK)
+  #define LCD_CLKCONTROL_PCD_BIT   0
+  #define LCD_CLKCONTROL_PCD_MASK  (0x3FF << LCD_CLKCONTROL_PCD_BIT)
+  #define LCD_CLKCONTROL_PCD_N(N)  (((N) << LCD_CLKCONTROL_PCD_BIT) & LCD_CLKCONTROL_PCD_MASK)
+
+#define LCD_DMAADDR0               (AU1100_LCD_BASE + 0x18)
+#define LCD_DMAADDR1               (AU1100_LCD_BASE + 0x1C)
+  #define LCD_DMA_SA_BIT           5
+  #define LCD_DMA_SA_MASK          (0x7FFFFFF << LCD_DMA_SA_BIT)
+  #define LCD_DMA_SA_N(N)          ((N) & LCD_DMA_SA_MASK)
+
+#define LCD_WORDS                  (AU1100_LCD_BASE + 0x20)
+  #define LCD_WRD_WRDS_BIT         0
+  #define LCD_WRD_WRDS_MASK        (0xFFFFFFFF << LCD_WRD_WRDS_BIT)
+  #define LCD_WRD_WRDS_N(N)        ((((N)-1) << LCD_WRD_WRDS_BIT) & LCD_WRD_WRDS_MASK)
+
+#define LCD_PWMDIV                 (AU1100_LCD_BASE + 0x24)
+  #define LCD_PWMDIV_EN            (1<<12)
+  #define LCD_PWMDIV_PWMDIV_BIT    0
+  #define LCD_PWMDIV_PWMDIV_MASK   (0xFFF << LCD_PWMDIV_PWMDIV_BIT)
+  #define LCD_PWMDIV_PWMDIV_N(N)   ((((N)-1) << LCD_PWMDIV_PWMDIV_BIT) & LCD_PWMDIV_PWMDIV_MASK)
+
+#define LCD_PWMHI                  (AU1100_LCD_BASE + 0x28)
+  #define LCD_PWMHI_PWMHI1_BIT     12
+  #define LCD_PWMHI_PWMHI1_MASK    (0xFFF << LCD_PWMHI_PWMHI1_BIT)
+  #define LCD_PWMHI_PWMHI1_N(N)    (((N) << LCD_PWMHI_PWMHI1_BIT) & LCD_PWMHI_PWMHI1_MASK)
+  #define LCD_PWMHI_PWMHI0_BIT     0
+  #define LCD_PWMHI_PWMHI0_MASK    (0xFFF << LCD_PWMHI_PWMHI0_BIT)
+  #define LCD_PWMHI_PWMHI0_N(N)    (((N) << LCD_PWMHI_PWMHI0_BIT) & LCD_PWMHI_PWMHI0_MASK)
+
+#define LCD_PALLETTEBASE                (AU1100_LCD_BASE + 0x400)
+  #define LCD_PALLETTE_MONO_MI_BIT      0
+  #define LCD_PALLETTE_MONO_MI_MASK     (0xF << LCD_PALLETTE_MONO_MI_BIT)
+  #define LCD_PALLETTE_MONO_MI_N(N)     (((N)<< LCD_PALLETTE_MONO_MI_BIT) & LCD_PALLETTE_MONO_MI_MASK)
+
+  #define LCD_PALLETTE_COLOR_RI_BIT     8
+  #define LCD_PALLETTE_COLOR_RI_MASK    (0xF << LCD_PALLETTE_COLOR_RI_BIT)
+  #define LCD_PALLETTE_COLOR_RI_N(N)    (((N)<< LCD_PALLETTE_COLOR_RI_BIT) & LCD_PALLETTE_COLOR_RI_MASK)
+  #define LCD_PALLETTE_COLOR_GI_BIT     4
+  #define LCD_PALLETTE_COLOR_GI_MASK    (0xF << LCD_PALLETTE_COLOR_GI_BIT)
+  #define LCD_PALLETTE_COLOR_GI_N(N)    (((N)<< LCD_PALLETTE_COLOR_GI_BIT) & LCD_PALLETTE_COLOR_GI_MASK)
+  #define LCD_PALLETTE_COLOR_BI_BIT     0
+  #define LCD_PALLETTE_COLOR_BI_MASK    (0xF << LCD_PALLETTE_COLOR_BI_BIT)
+  #define LCD_PALLETTE_COLOR_BI_N(N)    (((N)<< LCD_PALLETTE_COLOR_BI_BIT) & LCD_PALLETTE_COLOR_BI_MASK)
+
+  #define LCD_PALLETTE_TFT_DC_BIT       0
+  #define LCD_PALLETTE_TFT_DC_MASK      (0xFFFF << LCD_PALLETTE_TFT_DC_BIT)
+  #define LCD_PALLETTE_TFT_DC_N(N)      (((N)<< LCD_PALLETTE_TFT_DC_BIT) & LCD_PALLETTE_TFT_DC_MASK)
+
+/********************************************************************/
+
+/* List of panels known to work with the AU1100 LCD controller.
+ * To add a new panel, enter the same specifications as the
+ * Generic_TFT one, and MAKE SURE that it doesn't conflicts
+ * with the controller restrictions. Restrictions are:
+ *
+ * STN color panels: max_bpp <= 12
+ * STN mono panels: max_bpp <= 4
+ * TFT panels: max_bpp <= 16
+ * max_xres <= 800
+ * max_yres <= 600
  */
-struct known_lcd_panels panels[] =
+static struct au1100fb_panel known_lcd_panels[] =
 {
-	{ /* 0: Pb1100 LCDA: Sharp 320x240 TFT panel */
-		320, /* xres */
-		240, /* yres */
-		16,  /* bpp  */
-
-		"Sharp_320x240_16",
-		/* mode_control */
+	/* 800x600x16bpp CRT */
+	[0] = {
+		.name = "CRT_800x600_16",
+		.xres = 800,
+		.yres = 600,
+		.bpp = 16,
+		.control_base =	0x0004886A |
+			LCD_CONTROL_DEFAULT_PO | LCD_CONTROL_DEFAULT_SBPPF |
+			LCD_CONTROL_BPP_16,
+		.clkcontrol_base = 0x00020000,
+		.horztiming = 0x005aff1f,
+		.verttiming = 0x16000e57,
+	},
+	/* just the standard LCD */
+	[1] = {
+		.name = "WWPC LCD",
+		.xres = 240,
+		.yres = 320,
+		.bpp = 16,
+		.control_base = 0x0006806A,
+		.horztiming = 0x0A1010EF,
+		.verttiming = 0x0301013F,
+		.clkcontrol_base = 0x00018001,
+	},
+	/* Sharp 320x240 TFT panel */
+	[2] = {
+		.name = "Sharp_LQ038Q5DR01",
+		.xres = 320,
+		.yres = 240,
+		.bpp = 16,
+		.control_base =
 		( LCD_CONTROL_SBPPF_565
-		/*LCD_CONTROL_WP*/
-		/*LCD_CONTROL_WD*/
 		| LCD_CONTROL_C
 		| LCD_CONTROL_SM_0
-		/*LCD_CONTROL_DB*/
-		/*LCD_CONTROL_CCO*/
-		/*LCD_CONTROL_DP*/
-		| LCD_DEFAULT_PIX_FORMAT
-		/*LCD_CONTROL_MPI*/
+			| LCD_CONTROL_DEFAULT_PO
 		| LCD_CONTROL_PT
 		| LCD_CONTROL_PC
 		| LCD_CONTROL_BPP_16 ),
-
-		/* mode_horztiming */
+		.horztiming =
 		( LCD_HORZTIMING_HN2_N(8)
 		| LCD_HORZTIMING_HN1_N(60)
 		| LCD_HORZTIMING_HPW_N(12)
 		| LCD_HORZTIMING_PPL_N(320) ),
-
-		/* mode_verttiming */
+		.verttiming =
 		( LCD_VERTTIMING_VN2_N(5)
 		| LCD_VERTTIMING_VN1_N(17)
 		| LCD_VERTTIMING_VPW_N(1)
 		| LCD_VERTTIMING_LPP_N(240) ),
-
-		/* mode_clkcontrol */
-		( 0
-		/*LCD_CLKCONTROL_IB*/
-		/*LCD_CLKCONTROL_IC*/
-		/*LCD_CLKCONTROL_IH*/
-		/*LCD_CLKCONTROL_IV*/
-		| LCD_CLKCONTROL_PCD_N(1) ),
-
-		/* mode_pwmdiv */
-		0,
-
-		/* mode_pwmhi */
-		0,
-
-		/* mode_toyclksrc */
-		((1<<7) | (1<<6) | (1<<5)),
-
-		/* mode_backlight */
-		6
+		.clkcontrol_base = LCD_CLKCONTROL_PCD_N(1),
 	},
 
-	{ /* 1: Pb1100 LCDC 640x480 TFT panel */
-		640, /* xres */
-		480, /* yres */
-		16,  /* bpp  */
-
-		"Generic_640x480_16",
-
-		/* mode_control */
-		0x004806a | LCD_DEFAULT_PIX_FORMAT,
-
-		/* mode_horztiming */
-		0x3434d67f,
-
-		/* mode_verttiming */
-		0x0e0e39df,
-
-		/* mode_clkcontrol */
-		( 0
-		/*LCD_CLKCONTROL_IB*/
-		/*LCD_CLKCONTROL_IC*/
-		/*LCD_CLKCONTROL_IH*/
-		/*LCD_CLKCONTROL_IV*/
-		| LCD_CLKCONTROL_PCD_N(1) ),
-
-		/* mode_pwmdiv */
-		0,
-
-		/* mode_pwmhi */
-		0,
-
-		/* mode_toyclksrc */
-		((1<<7) | (1<<6) | (0<<5)),
-
-		/* mode_backlight */
-		7
+	/* Hitachi SP14Q005 and possibly others */
+	[3] = {
+		.name = "Hitachi_SP14Qxxx",
+		.xres = 320,
+		.yres = 240,
+		.bpp = 4,
+		.control_base =
+			( LCD_CONTROL_C
+			| LCD_CONTROL_BPP_4 ),
+		.horztiming =
+			( LCD_HORZTIMING_HN2_N(1)
+			| LCD_HORZTIMING_HN1_N(1)
+			| LCD_HORZTIMING_HPW_N(1)
+			| LCD_HORZTIMING_PPL_N(320) ),
+		.verttiming =
+			( LCD_VERTTIMING_VN2_N(1)
+			| LCD_VERTTIMING_VN1_N(1)
+			| LCD_VERTTIMING_VPW_N(1)
+			| LCD_VERTTIMING_LPP_N(240) ),
+		.clkcontrol_base = LCD_CLKCONTROL_PCD_N(4),
 	},
 
-	{ /* 2: Pb1100 LCDB 640x480 PrimeView TFT panel */
-		640, /* xres */
-		480, /* yres */
-		16,  /* bpp  */
-
-		"PrimeView_640x480_16",
-
-		/* mode_control */
-		0x0004886a | LCD_DEFAULT_PIX_FORMAT,
-
-		/* mode_horztiming */
-		0x0e4bfe7f,
-
-		/* mode_verttiming */
-		0x210805df,
-
-		/* mode_clkcontrol */
-		0x00038001,
-
-		/* mode_pwmdiv */
-		0,
-
-		/* mode_pwmhi */
-		0,
-
-		/* mode_toyclksrc */
-		((1<<7) | (1<<6) | (0<<5)),
-
-		/* mode_backlight */
-		7
+	/* Generic 640x480 TFT panel */
+	[4] = {
+		.name = "TFT_640x480_16",
+		.xres = 640,
+		.yres = 480,
+		.bpp = 16,
+		.control_base = 0x004806a | LCD_CONTROL_DEFAULT_PO,
+		.horztiming = 0x3434d67f,
+		.verttiming = 0x0e0e39df,
+		.clkcontrol_base = LCD_CLKCONTROL_PCD_N(1),
 	},
 
-	{ /* 3: Pb1100 800x600x16bpp NEON CRT */
-		800, /* xres */
-		600, /* yres */
-		16,  /* bpp */
-
-		"NEON_800x600_16",
-
-		/* mode_control */
-		0x0004886A | LCD_DEFAULT_PIX_FORMAT,
-
-		/* mode_horztiming */
-		0x005AFF1F,
-
-		/* mode_verttiming */
-		0x16000E57,
-
-		/* mode_clkcontrol */
-		0x00020000,
-
-		/* mode_pwmdiv */
-		0,
-
-		/* mode_pwmhi */
-		0,
-
-		/* mode_toyclksrc */
-		((1<<7) | (1<<6) | (0<<5)),
-
-		/* mode_backlight */
-		7
+	 /* Pb1100 LCDB 640x480 PrimeView TFT panel */
+	[5] = {
+		.name = "PrimeView_640x480_16",
+		.xres = 640,
+		.yres = 480,
+		.bpp = 16,
+		.control_base = 0x0004886a | LCD_CONTROL_DEFAULT_PO,
+		.horztiming = 0x0e4bfe7f,
+		.verttiming = 0x210805df,
+		.clkcontrol_base = 0x00038001,
 	},
+};
 
-	{ /* 4: Pb1100 640x480x16bpp NEON CRT */
-		640, /* xres */
-		480, /* yres */
-		16,  /* bpp */
-
-		"NEON_640x480_16",
-
-		/* mode_control */
-		0x0004886A | LCD_DEFAULT_PIX_FORMAT,
-
-		/* mode_horztiming */
-		0x0052E27F,
-
-		/* mode_verttiming */
-		0x18000DDF,
-
-		/* mode_clkcontrol */
-		0x00020000,
+struct au1100fb_drv_info {
+	int	panel_idx;
+	char 	*opt_mode;
+};
 
-		/* mode_pwmdiv */
-		0,
+/********************************************************************/
 
-		/* mode_pwmhi */
-		0,
+/* Inline helpers */
 
-		/* mode_toyclksrc */
-		((1<<7) | (1<<6) | (0<<5)),
+#define panel_is_dual(panel)  (panel->control_base & LCD_CONTROL_DP)
+#define panel_is_active(panel)(panel->control_base & LCD_CONTROL_PT)
+#define panel_is_color(panel) (panel->control_base & LCD_CONTROL_PC)
+#define panel_swap_rgb(panel) (panel->control_base & LCD_CONTROL_CCO)
 
-		/* mode_backlight */
-		7
-	},
-};
 #endif /* _AU1100LCD_H */
-- 
cgit v1.2.3


From a93500037e6cf1d08ce112444386f408a047b548 Mon Sep 17 00:00:00 2001
From: "Maciej W. Rozycki" <macro@linux-mips.org>
Date: Mon, 13 Jun 2005 19:50:42 +0000
Subject: Fix dependencies for DECstation framebuffers.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 drivers/video/Kconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 1cd942abb580..7e297947a2b2 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1376,7 +1376,7 @@ config FB_HIT
 
 config FB_PMAG_AA
 	bool "PMAG-AA TURBOchannel framebuffer support"
-	depends on (FB = y) && MACH_DECSTATION && TC
+	depends on (FB = y) && TC
  	select FB_CFB_FILLRECT
  	select FB_CFB_COPYAREA
  	select FB_CFB_IMAGEBLIT
@@ -1387,7 +1387,7 @@ config FB_PMAG_AA
 
 config FB_PMAG_BA
 	bool "PMAG-BA TURBOchannel framebuffer support"
-	depends on (FB = y) && MACH_DECSTATION && TC
+	depends on (FB = y) && TC
  	select FB_CFB_FILLRECT
  	select FB_CFB_COPYAREA
  	select FB_CFB_IMAGEBLIT
@@ -1398,7 +1398,7 @@ config FB_PMAG_BA
 
 config FB_PMAGB_B
 	bool "PMAGB-B TURBOchannel framebuffer support"
-	depends on (FB = y) && MACH_DECSTATION && TC
+	depends on (FB = y) && TC
  	select FB_CFB_FILLRECT
  	select FB_CFB_COPYAREA
  	select FB_CFB_IMAGEBLIT
@@ -1410,7 +1410,7 @@ config FB_PMAGB_B
 
 config FB_MAXINE
 	bool "Maxine (Personal DECstation) onboard framebuffer support"
-	depends on (FB = y) && MACH_DECSTATION && TC
+	depends on (FB = y) && MACH_DECSTATION
  	select FB_CFB_FILLRECT
  	select FB_CFB_COPYAREA
  	select FB_CFB_IMAGEBLIT
-- 
cgit v1.2.3


From c5c96e13790122095fdf2ea74a8131e5f6b60c03 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Sat, 1 Oct 2005 10:17:54 +0100
Subject: Fix build error caused by missmatching duplicate declaration.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 drivers/video/console/newport_con.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c
index e793ffd39db5..762c7a593141 100644
--- a/drivers/video/console/newport_con.c
+++ b/drivers/video/console/newport_con.c
@@ -32,7 +32,6 @@
 #include <linux/font.h>
 
 
-extern struct font_desc font_vga_8x16;
 extern unsigned long sgi_gfxaddr;
 
 #define FONT_DATA ((unsigned char *)font_vga_8x16.data)
-- 
cgit v1.2.3


From 0d078f6f96809c95c69b99d6605a502b0ac63d3d Mon Sep 17 00:00:00 2001
From: Brian Gerst <bgerst@didntduck.org>
Date: Sun, 30 Oct 2005 14:59:20 -0800
Subject: [PATCH] CONFIG_IA32

Add CONFIG_X86_32 for i386.  This allows selecting options that only apply
to 32-bit systems.

(X86 && !X86_64) becomes X86_32
(X86 ||  X86_64) becomes X86

Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
---
 drivers/video/Kconfig         | 6 +++---
 drivers/video/console/Kconfig | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 7e297947a2b2..7192b770bfb6 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -494,7 +494,7 @@ config FB_TGA
 
 config FB_VESA
 	bool "VESA VGA graphics support"
-	depends on (FB = y) && (X86 || X86_64)
+	depends on (FB = y) && X86
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -712,7 +712,7 @@ config FB_RIVA_DEBUG
 
 config FB_I810
 	tristate "Intel 810/815 support (EXPERIMENTAL)"
-	depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
+	depends on FB && EXPERIMENTAL && PCI && X86_32
 	select AGP
 	select AGP_INTEL
 	select FB_MODE_HELPERS
@@ -761,7 +761,7 @@ config FB_I810_I2C
 
 config FB_INTEL
 	tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
-	depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
+	depends on FB && EXPERIMENTAL && PCI && X86_32
 	select AGP
 	select AGP_INTEL
 	select FB_MODE_HELPERS
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 7e731691e2a9..6a9ae2b3d1ab 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -28,7 +28,7 @@ config VGA_CONSOLE
 
 config VIDEO_SELECT
 	bool "Video mode selection support"
-	depends on  (X86 || X86_64) && VGA_CONSOLE
+	depends on  X86 && VGA_CONSOLE
 	---help---
 	  This enables support for text mode selection on kernel startup. If
 	  you want to take advantage of some high-resolution text mode your
-- 
cgit v1.2.3


From 1a66ddcb770fbd20ce115910c7828cafdba099c1 Mon Sep 17 00:00:00 2001
From: Pozsar Balazs <pozsy@uhulinux.hu>
Date: Sun, 30 Oct 2005 15:03:06 -0800
Subject: [PATCH] fix vgacon blanking

This patch fixes a long-standing vgacon bug: characters with the bright bit
set were left on the screen and not blacked out.  All I did was that I
lookuped up some examples on the net about setting the vga palette, and
added the call missing from the linux kernel, but included in all other
ones.  It works for me.

You can test this by writing something with the bright set to the
console, for example:
  echo -e "\e[1;31mhello there\e[0m"
and then wait for the console to blank itself (by default, after 10 mins
of inactivity), maybe making it faster using
  setterm -blank 1
so you only have to wait 1 minute.

Signed-off-by: Pozsar Balazs <pozsy@uhulinux.hu>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
---
 drivers/video/console/vgacon.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 809fee2140ac..56cd199605f4 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -579,6 +579,7 @@ static void vga_set_palette(struct vc_data *vc, unsigned char *table)
 {
 	int i, j;
 
+	vga_w(state.vgabase, VGA_PEL_MSK, 0xff);
 	for (i = j = 0; i < 16; i++) {
 		vga_w(state.vgabase, VGA_PEL_IW, table[i]);
 		vga_w(state.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2);
@@ -721,6 +722,7 @@ static void vga_pal_blank(struct vgastate *state)
 {
 	int i;
 
+	vga_w(state->vgabase, VGA_PEL_MSK, 0xff);
 	for (i = 0; i < 16; i++) {
 		vga_w(state->vgabase, VGA_PEL_IW, i);
 		vga_w(state->vgabase, VGA_PEL_D, 0);
-- 
cgit v1.2.3


From e831556fb6f81142f9b51d1a05953d8046c27467 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Wed, 2 Nov 2005 14:40:35 +0000
Subject: [ARM] AMBA CLCD driver can drive PL110 and PL111 primecells

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/video/amba-clcd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index cde6fd8eb390..4fc93dc2b4d3 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -505,14 +505,14 @@ static int clcdfb_remove(struct amba_device *dev)
 static struct amba_id clcdfb_id_table[] = {
 	{
 		.id	= 0x00041110,
-		.mask	= 0x000fffff,
+		.mask	= 0x000ffffe,
 	},
 	{ 0, 0 },
 };
 
 static struct amba_driver clcd_driver = {
 	.drv 		= {
-		.name	= "clcd-pl110",
+		.name	= "clcd-pl11x",
 	},
 	.probe		= clcdfb_probe,
 	.remove		= clcdfb_remove,
-- 
cgit v1.2.3


From 7015faa7df829876a0f931cd18aa6d7c24a1b581 Mon Sep 17 00:00:00 2001
From: "Calin A. Culianu" <calin@ajvar.org>
Date: Fri, 4 Nov 2005 20:38:04 -0500
Subject: [PATCH] nvidiafb: Geforce 7800 series support added

This adds support for the Nvidia Geforce 7800 series of cards to the
nvidiafb framebuffer driver.  All it does is add the PCI device id for
the 7800, 7800 GTX, 7800 GO, and 7800 GTX GO cards to the module device
table for the nvidiafb.ko driver, so that nvidiafb.ko will actually work
on these cards.

I also added the relevant PCI device ids to linux/pci_ids.h

I tested it on my 7800 GTX here and it works like a charm.  I now can
get framebuffer support on this card! Woo hoo!! Nothing like 200x75 text
mode to make your eyes BLEED.  ;)

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
---
 drivers/video/nvidia/nvidia.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c
index a7f020ada630..308defc389a2 100644
--- a/drivers/video/nvidia/nvidia.c
+++ b/drivers/video/nvidia/nvidia.c
@@ -384,6 +384,14 @@ static struct pci_device_id nvidiafb_pci_tbl[] = {
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_GT,
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GT,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GTX,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_7800,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_7800_GTX,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_NVIDIA, 0x021d,
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_NVIDIA, 0x021e,
-- 
cgit v1.2.3