From 018b97d084db483096421f95dfdf6c00e7144d67 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 29 Oct 2010 11:04:49 +0200 Subject: USB: Fix FSL USB driver on non Open Firmware systems MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 126512e3f274802ca65ebeca8660237f0361ad48 added support for FSL's USB controller on powerpc. In this commit the Open Firmware code was selected and compiled unconditionally. This breaks on ARM systems from FSL which use the same driver (.i.e. the i.MX series), because ARM don't have OF support (yet). This patch fixes the problem by only selecting the OF code on systems with Open Firmware support. Reported-by: Uwe Kleine-König Signed-off-by: Marc Kleine-Budde Compile-Tested-by: Uwe Kleine-König Acked-by: Grant Likely Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb/gadget') diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index b739ca814651..607d0db4a988 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -158,7 +158,7 @@ config USB_GADGET_FSL_USB2 boolean "Freescale Highspeed USB DR Peripheral Controller" depends on FSL_SOC || ARCH_MXC select USB_GADGET_DUALSPEED - select USB_FSL_MPH_DR_OF + select USB_FSL_MPH_DR_OF if OF help Some of Freescale PowerPC processors have a High Speed Dual-Role(DR) USB controller, which supports device mode. -- cgit v1.2.3 From 4b4cd731b08fd7fa2f370a5b329062fb5006dc24 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Wed, 3 Nov 2010 18:02:38 +0000 Subject: usb: gadget: goku_udc: add registered flag bit, fixing build The commit below cleaned up error handling, in part by introducing a registered flag bit. This however was not added to the device structure leding to build failures: commit 319feaabb6c7ccd90da6e3207563c265da7d21ae Author: Dan Carpenter Date: Tue Oct 5 18:55:34 2010 +0200 usb: gadget: goku_udc: Fix error path Add the missing registered flag bit. Signed-off-by: Andy Whitcroft Acked-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/goku_udc.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/usb/gadget') diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h index 566cb2319056..e7e0c69d3b1f 100644 --- a/drivers/usb/gadget/goku_udc.h +++ b/drivers/usb/gadget/goku_udc.h @@ -251,7 +251,8 @@ struct goku_udc { got_region:1, req_config:1, configured:1, - enabled:1; + enabled:1, + registered:1; /* pci state used to access those endpoints */ struct pci_dev *pdev; -- cgit v1.2.3 From 28609d4083bcd4879e951b0c4ecf4c3a88761261 Mon Sep 17 00:00:00 2001 From: Jim Sung Date: Thu, 4 Nov 2010 18:47:51 -0700 Subject: usb: subtle increased memory usage in u_serial OK, the USB gadget serial driver actually has a couple of problems. On gs_open(), it always allocates and queues an additional QUEUE_SIZE (16) worth of requests, so with a loop like this: i=1 ; while echo $i > /dev/ttyGS0 ; do let i++ ; done eventually we run into OOM (Out of Memory). Technically, it is not a leak as everything gets freed up when the USB connection is broken, but not on gs_close(). With a USB device/gadget controller driver that has limited resources (e.g., Marvell has a this MAX_XDS_FOR_TR_CALLS of 64 for transmit and receive), so even after 4 stty -F /dev/ttyGS0 we cannot transmit anymore. We can still receive (not necessarily reliably) as now we have 16 * 4 = 64 descriptors/buffers ready, but the device is otherwise not usable. Signed-off-by: Jim Sung Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/u_serial.c | 54 ++++++++++++++++++++++++++++++++----------- 1 file changed, 40 insertions(+), 14 deletions(-) (limited to 'drivers/usb/gadget') diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index 01e5354a4c20..40f7716b31fc 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -105,11 +105,15 @@ struct gs_port { wait_queue_head_t close_wait; /* wait for last close */ struct list_head read_pool; + int read_started; + int read_allocated; struct list_head read_queue; unsigned n_read; struct tasklet_struct push; struct list_head write_pool; + int write_started; + int write_allocated; struct gs_buf port_write_buf; wait_queue_head_t drain_wait; /* wait while writes drain */ @@ -363,6 +367,9 @@ __acquires(&port->port_lock) struct usb_request *req; int len; + if (port->write_started >= QUEUE_SIZE) + break; + req = list_entry(pool->next, struct usb_request, list); len = gs_send_packet(port, req->buf, in->maxpacket); if (len == 0) { @@ -397,6 +404,8 @@ __acquires(&port->port_lock) break; } + port->write_started++; + /* abort immediately after disconnect */ if (!port->port_usb) break; @@ -418,7 +427,6 @@ __acquires(&port->port_lock) { struct list_head *pool = &port->read_pool; struct usb_ep *out = port->port_usb->out; - unsigned started = 0; while (!list_empty(pool)) { struct usb_request *req; @@ -430,6 +438,9 @@ __acquires(&port->port_lock) if (!tty) break; + if (port->read_started >= QUEUE_SIZE) + break; + req = list_entry(pool->next, struct usb_request, list); list_del(&req->list); req->length = out->maxpacket; @@ -447,13 +458,13 @@ __acquires(&port->port_lock) list_add(&req->list, pool); break; } - started++; + port->read_started++; /* abort immediately after disconnect */ if (!port->port_usb) break; } - return started; + return port->read_started; } /* @@ -535,6 +546,7 @@ static void gs_rx_push(unsigned long _port) } recycle: list_move(&req->list, &port->read_pool); + port->read_started--; } /* Push from tty to ldisc; without low_latency set this is handled by @@ -587,6 +599,7 @@ static void gs_write_complete(struct usb_ep *ep, struct usb_request *req) spin_lock(&port->port_lock); list_add(&req->list, &port->write_pool); + port->write_started--; switch (req->status) { default: @@ -608,7 +621,8 @@ static void gs_write_complete(struct usb_ep *ep, struct usb_request *req) spin_unlock(&port->port_lock); } -static void gs_free_requests(struct usb_ep *ep, struct list_head *head) +static void gs_free_requests(struct usb_ep *ep, struct list_head *head, + int *allocated) { struct usb_request *req; @@ -616,25 +630,31 @@ static void gs_free_requests(struct usb_ep *ep, struct list_head *head) req = list_entry(head->next, struct usb_request, list); list_del(&req->list); gs_free_req(ep, req); + if (allocated) + (*allocated)--; } } static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head, - void (*fn)(struct usb_ep *, struct usb_request *)) + void (*fn)(struct usb_ep *, struct usb_request *), + int *allocated) { int i; struct usb_request *req; + int n = allocated ? QUEUE_SIZE - *allocated : QUEUE_SIZE; /* Pre-allocate up to QUEUE_SIZE transfers, but if we can't * do quite that many this time, don't fail ... we just won't * be as speedy as we might otherwise be. */ - for (i = 0; i < QUEUE_SIZE; i++) { + for (i = 0; i < n; i++) { req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC); if (!req) return list_empty(head) ? -ENOMEM : 0; req->complete = fn; list_add_tail(&req->list, head); + if (allocated) + (*allocated)++; } return 0; } @@ -661,14 +681,15 @@ static int gs_start_io(struct gs_port *port) * configurations may use different endpoints with a given port; * and high speed vs full speed changes packet sizes too. */ - status = gs_alloc_requests(ep, head, gs_read_complete); + status = gs_alloc_requests(ep, head, gs_read_complete, + &port->read_allocated); if (status) return status; status = gs_alloc_requests(port->port_usb->in, &port->write_pool, - gs_write_complete); + gs_write_complete, &port->write_allocated); if (status) { - gs_free_requests(ep, head); + gs_free_requests(ep, head, &port->read_allocated); return status; } @@ -680,8 +701,9 @@ static int gs_start_io(struct gs_port *port) if (started) { tty_wakeup(port->port_tty); } else { - gs_free_requests(ep, head); - gs_free_requests(port->port_usb->in, &port->write_pool); + gs_free_requests(ep, head, &port->read_allocated); + gs_free_requests(port->port_usb->in, &port->write_pool, + &port->write_allocated); status = -EIO; } @@ -1315,8 +1337,12 @@ void gserial_disconnect(struct gserial *gser) spin_lock_irqsave(&port->port_lock, flags); if (port->open_count == 0 && !port->openclose) gs_buf_free(&port->port_write_buf); - gs_free_requests(gser->out, &port->read_pool); - gs_free_requests(gser->out, &port->read_queue); - gs_free_requests(gser->in, &port->write_pool); + gs_free_requests(gser->out, &port->read_pool, NULL); + gs_free_requests(gser->out, &port->read_queue, NULL); + gs_free_requests(gser->in, &port->write_pool, NULL); + + port->read_allocated = port->read_started = + port->write_allocated = port->write_started = 0; + spin_unlock_irqrestore(&port->port_lock, flags); } -- cgit v1.2.3