From 7d0771970c51e736758525dd71fb82dd036b823a Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 17 Jun 2009 16:26:03 -0700 Subject: spi: move common spi_setup() functionality into core Start moving some spi_setup() functionality into the SPI core from the various spi_master controller drivers: - Make that function stop being an inline; - Move two common idioms from drivers into that new function: * Default bits_per_word to 8 if that field isn't set * Issue a standardized dev_dbg() message This is a net minor source code shrink, and supports enhancments found in some follow-up patches. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_bitbang.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers/spi/spi_bitbang.c') diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c index 85e61f451218..855b0b06e625 100644 --- a/drivers/spi/spi_bitbang.c +++ b/drivers/spi/spi_bitbang.c @@ -201,9 +201,6 @@ int spi_bitbang_setup(struct spi_device *spi) spi->controller_state = cs; } - if (!spi->bits_per_word) - spi->bits_per_word = 8; - /* per-word shift register access, in hardware or bitbanging */ cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)]; if (!cs->txrx_word) @@ -213,9 +210,7 @@ int spi_bitbang_setup(struct spi_device *spi) if (retval < 0) return retval; - dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n", - __func__, spi->mode & (SPI_CPOL | SPI_CPHA), - spi->bits_per_word, 2 * cs->nsecs); + dev_dbg(&spi->dev, "%s, %u nsec/bit\n", __func__, 2 * cs->nsecs); /* NOTE we _need_ to call chipselect() early, ideally with adapter * setup, unless the hardware defaults cooperate to avoid confusion -- cgit v1.2.3 From e7db06b5d5afcef15c4c3e61c3a7441ed7ad1407 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 17 Jun 2009 16:26:04 -0700 Subject: spi: move more spi_setup() functionality into core Move some common spi_setup() error checks into the SPI framework from the spi_master controller drivers: - Add a new "mode_bits" field to spi_master - Use that in spi_setup to validate the spi->mode value being requested. Setting this new field is now mandatory for any controller supporting more than vanilla SPI_MODE_0. - Update all spi_master drivers to: * Initialize that field * Remove current spi_setup() checks using that value. This is a net minor code shrink. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_bitbang.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/spi/spi_bitbang.c') diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c index 855b0b06e625..2a5abc08e857 100644 --- a/drivers/spi/spi_bitbang.c +++ b/drivers/spi/spi_bitbang.c @@ -188,12 +188,6 @@ int spi_bitbang_setup(struct spi_device *spi) bitbang = spi_master_get_devdata(spi->master); - /* Bitbangers can support SPI_CS_HIGH, SPI_3WIRE, and so on; - * add those to master->flags, and provide the other support. - */ - if ((spi->mode & ~(SPI_CPOL|SPI_CPHA|bitbang->flags)) != 0) - return -EINVAL; - if (!cs) { cs = kzalloc(sizeof *cs, GFP_KERNEL); if (!cs) @@ -452,6 +446,9 @@ int spi_bitbang_start(struct spi_bitbang *bitbang) spin_lock_init(&bitbang->lock); INIT_LIST_HEAD(&bitbang->queue); + if (!bitbang->master->mode_bits) + bitbang->master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags; + if (!bitbang->master->transfer) bitbang->master->transfer = spi_bitbang_transfer; if (!bitbang->txrx_bufs) { -- cgit v1.2.3