From 7b358f0652dc09069ee19c4cda52fb20a1fa582a Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 23 Oct 2014 14:42:33 +0300 Subject: iwlwifi: mvm: initialize the cur_ucode upon boot mvm->cur_ucode wasn't set before we actually load the firmware. This caused issues when we boot in RFKILL since we get an RFKILL interrupt upon boot even before we load any firmware. This leads to issues since iwl_mvm_set_hw_rfkill_state (the RFKILL interrupts handler in mvm) relies on this variable. Fix this. Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/ops.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/wireless/iwlwifi/mvm') diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index 48cb25a93591..27fb0a1ef274 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -424,6 +424,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg, } mvm->sf_state = SF_UNINIT; mvm->low_latency_agg_frame_limit = 6; + mvm->cur_ucode = IWL_UCODE_INIT; mutex_init(&mvm->mutex); mutex_init(&mvm->d0i3_suspend_mutex); -- cgit v1.2.3 From 31b8b343e019e0a0c57ca9c13520a87f9cab884b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 2 Nov 2014 15:48:09 +0200 Subject: iwlwifi: fix RFkill while calibrating If the RFkill interrupt fires while we calibrate, it would make the firmware fail and the driver wasn't able to recover. Change the flow so that the driver will kill the firmware in that case. Since we have now two flows that are calling trans_stop_device (the RFkill interrupt and the op_mode_mvm_start function) - we need to better sync this. Use the STATUS_DEVICE_ENABLED in the pcie transport in an atomic way to achieve this. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=86231 CC: [3.10+] Reviewed-by: Johannes Berg Reviewed-by: Luciano Coelho Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/fw.c | 10 +++++++++- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 1 + drivers/net/wireless/iwlwifi/mvm/mvm.h | 1 + drivers/net/wireless/iwlwifi/mvm/ops.c | 11 ++++++++++- 4 files changed, 21 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless/iwlwifi/mvm') diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index e0d9f19650b0..eb03943f8463 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -284,7 +284,7 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) lockdep_assert_held(&mvm->mutex); - if (WARN_ON_ONCE(mvm->init_ucode_complete)) + if (WARN_ON_ONCE(mvm->init_ucode_complete || mvm->calibrating)) return 0; iwl_init_notification_wait(&mvm->notif_wait, @@ -334,6 +334,8 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) goto out; } + mvm->calibrating = true; + /* Send TX valid antennas before triggering calibrations */ ret = iwl_send_tx_ant_cfg(mvm, mvm->fw->valid_tx_ant); if (ret) @@ -358,11 +360,17 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) MVM_UCODE_CALIB_TIMEOUT); if (!ret) mvm->init_ucode_complete = true; + + if (ret && iwl_mvm_is_radio_killed(mvm)) { + IWL_DEBUG_RF_KILL(mvm, "RFKILL while calibrating.\n"); + ret = 1; + } goto out; error: iwl_remove_notification(&mvm->notif_wait, &calib_wait); out: + mvm->calibrating = false; if (iwlmvm_mod_params.init_dbg && !mvm->nvm_data) { /* we want to debug INIT and we have no NVM - fake */ mvm->nvm_data = kzalloc(sizeof(struct iwl_nvm_data) + diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 585fe5b7100f..b62405865b25 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -788,6 +788,7 @@ static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm) mvm->scan_status = IWL_MVM_SCAN_NONE; mvm->ps_disabled = false; + mvm->calibrating = false; /* just in case one was running */ ieee80211_remain_on_channel_expired(mvm->hw); diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index b153ced7015b..845429c88cf4 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -548,6 +548,7 @@ struct iwl_mvm { enum iwl_ucode_type cur_ucode; bool ucode_loaded; bool init_ucode_complete; + bool calibrating; u32 error_event_table; u32 log_event_table; u32 umac_error_event_table; diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index 27fb0a1ef274..5b719ee8e789 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -753,6 +753,7 @@ void iwl_mvm_set_hw_ctkill_state(struct iwl_mvm *mvm, bool state) static bool iwl_mvm_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state) { struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); + bool calibrating = ACCESS_ONCE(mvm->calibrating); if (state) set_bit(IWL_MVM_STATUS_HW_RFKILL, &mvm->status); @@ -761,7 +762,15 @@ static bool iwl_mvm_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state) wiphy_rfkill_set_hw_state(mvm->hw->wiphy, iwl_mvm_is_radio_killed(mvm)); - return state && mvm->cur_ucode != IWL_UCODE_INIT; + /* iwl_run_init_mvm_ucode is waiting for results, abort it */ + if (calibrating) + iwl_abort_notification_waits(&mvm->notif_wait); + + /* + * Stop the device if we run OPERATIONAL firmware or if we are in the + * middle of the calibrations. + */ + return state && (mvm->cur_ucode != IWL_UCODE_INIT || calibrating); } static void iwl_mvm_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb) -- cgit v1.2.3 From 9b520d84957d63348e87c0f2cbd21d86e1e8f2f2 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 4 Nov 2014 15:54:11 +0200 Subject: iwlwifi: mvm: abort scan upon RFKILL This code existed but not for all the different FW APIs we support. Fix this. Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/scan.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/net/wireless/iwlwifi/mvm') diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index b280d5d87127..7554f7053830 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -602,16 +602,6 @@ static int iwl_mvm_cancel_regular_scan(struct iwl_mvm *mvm) SCAN_COMPLETE_NOTIFICATION }; int ret; - if (mvm->scan_status == IWL_MVM_SCAN_NONE) - return 0; - - if (iwl_mvm_is_radio_killed(mvm)) { - ieee80211_scan_completed(mvm->hw, true); - iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN); - mvm->scan_status = IWL_MVM_SCAN_NONE; - return 0; - } - iwl_init_notification_wait(&mvm->notif_wait, &wait_scan_abort, scan_abort_notif, ARRAY_SIZE(scan_abort_notif), @@ -1400,6 +1390,16 @@ int iwl_mvm_unified_sched_scan_lmac(struct iwl_mvm *mvm, int iwl_mvm_cancel_scan(struct iwl_mvm *mvm) { + if (mvm->scan_status == IWL_MVM_SCAN_NONE) + return 0; + + if (iwl_mvm_is_radio_killed(mvm)) { + ieee80211_scan_completed(mvm->hw, true); + iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN); + mvm->scan_status = IWL_MVM_SCAN_NONE; + return 0; + } + if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LMAC_SCAN) return iwl_mvm_scan_offload_stop(mvm, true); return iwl_mvm_cancel_regular_scan(mvm); -- cgit v1.2.3 From 5ac6c72e594471acfa5b00210c51d533a73413ad Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 21 Oct 2014 16:12:18 +0300 Subject: iwlwifi: mvm: check TLV flag before trying to use hotspot firmware commands Older firmwares do not provide support for the HOT_SPOT_CMD command. Check for the appropriate TLV flag that declares hotspot support in the firmware to prevent a firmware assertion failure that can be triggered from the userspace, Cc: stable@vger.kernel.org [3.17+] Signed-off-by: Luciano Coelho Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless/iwlwifi/mvm') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index b62405865b25..b6d2683da3a9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -2448,9 +2448,15 @@ static int iwl_mvm_roc(struct ieee80211_hw *hw, switch (vif->type) { case NL80211_IFTYPE_STATION: - /* Use aux roc framework (HS20) */ - ret = iwl_mvm_send_aux_roc_cmd(mvm, channel, - vif, duration); + if (mvm->fw->ucode_capa.capa[0] & + IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT) { + /* Use aux roc framework (HS20) */ + ret = iwl_mvm_send_aux_roc_cmd(mvm, channel, + vif, duration); + goto out_unlock; + } + IWL_ERR(mvm, "hotspot not supported\n"); + ret = -EINVAL; goto out_unlock; case NL80211_IFTYPE_P2P_DEVICE: /* handle below */ -- cgit v1.2.3