From 686ea5851e776a85b8bebdc83a8e60c49c1924b3 Mon Sep 17 00:00:00 2001 From: Domenico Andreoli Date: Sat, 20 Oct 2012 03:35:28 +0200 Subject: ARM: bcm2835: Fix typo in the error message Fix typo in message reported when unable to lookup the uart1 clock. Signed-off-by: Domenico Andreoli Signed-off-by: Stephen Warren --- drivers/clk/clk-bcm2835.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-bcm2835.c b/drivers/clk/clk-bcm2835.c index 67ad16b20b81..59e0fd8016bf 100644 --- a/drivers/clk/clk-bcm2835.c +++ b/drivers/clk/clk-bcm2835.c @@ -55,5 +55,5 @@ void __init bcm2835_init_clocks(void) pr_err("uart1_pclk not registered\n"); ret = clk_register_clkdev(clk, NULL, "20215000.uart"); if (ret) - pr_err("uart0_pclk alias not registered\n"); + pr_err("uart1_pclk alias not registered\n"); } -- cgit v1.2.3 From 7d4998f71b292ea8e88d1874b26866092f66412b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Oct 2012 15:19:08 +0530 Subject: clk: SPEAr: Vco-pll: Fix compilation warning Currently we are getting following warning for SPEAr clk-vco-pll. "warning: i is used uninitialized in this function." This is because we are getting value of i by passing its pointer to another routine. The variables here are really not used uninitialized. Signed-off-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/spear/clk-vco-pll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c index 5f1b6badeb15..1b9b65bca51e 100644 --- a/drivers/clk/spear/clk-vco-pll.c +++ b/drivers/clk/spear/clk-vco-pll.c @@ -147,7 +147,7 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long drate, struct clk_pll *pll = to_clk_pll(hw); struct pll_rate_tbl *rtbl = pll->vco->rtbl; unsigned long flags = 0, val; - int i; + int uninitialized_var(i); clk_pll_round_rate_index(hw, drate, NULL, &i); -- cgit v1.2.3 From 2ac6b1f50a397580b8dc28f2833e54af7926fc71 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 3 Oct 2012 23:38:55 -0700 Subject: clk: Don't return negative numbers for unsigned values with !clk Some of the helper functions return negative error codes if passed a NULL clock. This can lead to confusing behavior when the expected return value is unsigned. Fix up these accessors so that they return unsigned values (or bool in the case of is_enabled). This way we can't interpret NULL clocks as having valid and interesting values. Signed-off-by: Stephen Boyd Signed-off-by: Mike Turquette --- drivers/clk/clk.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 56e4495ebeb1..bbe52c4ae7ca 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -261,7 +261,7 @@ inline struct clk_hw *__clk_get_hw(struct clk *clk) inline u8 __clk_get_num_parents(struct clk *clk) { - return !clk ? -EINVAL : clk->num_parents; + return !clk ? 0 : clk->num_parents; } inline struct clk *__clk_get_parent(struct clk *clk) @@ -269,14 +269,14 @@ inline struct clk *__clk_get_parent(struct clk *clk) return !clk ? NULL : clk->parent; } -inline int __clk_get_enable_count(struct clk *clk) +inline unsigned int __clk_get_enable_count(struct clk *clk) { - return !clk ? -EINVAL : clk->enable_count; + return !clk ? 0 : clk->enable_count; } -inline int __clk_get_prepare_count(struct clk *clk) +inline unsigned int __clk_get_prepare_count(struct clk *clk) { - return !clk ? -EINVAL : clk->prepare_count; + return !clk ? 0 : clk->prepare_count; } unsigned long __clk_get_rate(struct clk *clk) @@ -302,15 +302,15 @@ out: inline unsigned long __clk_get_flags(struct clk *clk) { - return !clk ? -EINVAL : clk->flags; + return !clk ? 0 : clk->flags; } -int __clk_is_enabled(struct clk *clk) +bool __clk_is_enabled(struct clk *clk) { int ret; if (!clk) - return -EINVAL; + return false; /* * .is_enabled is only mandatory for clocks that gate @@ -323,7 +323,7 @@ int __clk_is_enabled(struct clk *clk) ret = clk->ops->is_enabled(clk->hw); out: - return ret; + return !!ret; } static struct clk *__clk_lookup_subtree(const char *name, struct clk *clk) @@ -568,7 +568,7 @@ unsigned long __clk_round_rate(struct clk *clk, unsigned long rate) unsigned long parent_rate = 0; if (!clk) - return -EINVAL; + return 0; if (!clk->ops->round_rate) { if (clk->flags & CLK_SET_RATE_PARENT) -- cgit v1.2.3 From b0ea0fc753bfda1e9c20af403187758eb32052fd Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 24 Sep 2012 16:43:18 +0200 Subject: clk: ux500: Support prcmu ape opp voltage clock Some scalable prcmu clocks needs to be handled in conjuction with the ape opp 100 voltage. A new prcmu clock type clk_prcmu_opp_volt_scalable is implemented to handle this. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Mike Turquette --- drivers/clk/ux500/clk-prcmu.c | 55 +++++++++++++++++++++++++++++++++++++++++++ drivers/clk/ux500/clk.h | 6 +++++ 2 files changed, 61 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/clk-prcmu.c b/drivers/clk/ux500/clk-prcmu.c index 930cdfeb47ab..04577ca6a308 100644 --- a/drivers/clk/ux500/clk-prcmu.c +++ b/drivers/clk/ux500/clk-prcmu.c @@ -133,6 +133,40 @@ out_error: hw->init->name); } +static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw) +{ + int err; + struct clk_prcmu *clk = to_clk_prcmu(hw); + + err = prcmu_request_ape_opp_100_voltage(true); + if (err) { + pr_err("clk_prcmu: %s failed to request APE OPP VOLT for %s.\n", + __func__, hw->init->name); + return err; + } + + err = prcmu_request_clock(clk->cg_sel, true); + if (err) + prcmu_request_ape_opp_100_voltage(false); + + return err; +} + +static void clk_prcmu_opp_volt_unprepare(struct clk_hw *hw) +{ + struct clk_prcmu *clk = to_clk_prcmu(hw); + + if (prcmu_request_clock(clk->cg_sel, false)) + goto out_error; + if (prcmu_request_ape_opp_100_voltage(false)) + goto out_error; + return; + +out_error: + pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, + hw->init->name); +} + static struct clk_ops clk_prcmu_scalable_ops = { .prepare = clk_prcmu_prepare, .unprepare = clk_prcmu_unprepare, @@ -167,6 +201,17 @@ static struct clk_ops clk_prcmu_opp_gate_ops = { .recalc_rate = clk_prcmu_recalc_rate, }; +static struct clk_ops clk_prcmu_opp_volt_scalable_ops = { + .prepare = clk_prcmu_opp_volt_prepare, + .unprepare = clk_prcmu_opp_volt_unprepare, + .enable = clk_prcmu_enable, + .disable = clk_prcmu_disable, + .is_enabled = clk_prcmu_is_enabled, + .recalc_rate = clk_prcmu_recalc_rate, + .round_rate = clk_prcmu_round_rate, + .set_rate = clk_prcmu_set_rate, +}; + static struct clk *clk_reg_prcmu(const char *name, const char *parent_name, u8 cg_sel, @@ -250,3 +295,13 @@ struct clk *clk_reg_prcmu_opp_gate(const char *name, return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags, &clk_prcmu_opp_gate_ops); } + +struct clk *clk_reg_prcmu_opp_volt_scalable(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags) +{ + return clk_reg_prcmu(name, parent_name, cg_sel, rate, flags, + &clk_prcmu_opp_volt_scalable_ops); +} diff --git a/drivers/clk/ux500/clk.h b/drivers/clk/ux500/clk.h index 836d7d16751e..f36eeedca493 100644 --- a/drivers/clk/ux500/clk.h +++ b/drivers/clk/ux500/clk.h @@ -45,4 +45,10 @@ struct clk *clk_reg_prcmu_opp_gate(const char *name, u8 cg_sel, unsigned long flags); +struct clk *clk_reg_prcmu_opp_volt_scalable(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags); + #endif /* __UX500_CLK_H */ -- cgit v1.2.3 From 2f896ac0be9a0c7739033ef1f8821223f4a6a908 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 24 Sep 2012 16:43:19 +0200 Subject: clk: ux500: Update sdmmc clock to 100MHz for u8500 For u8500 and using 100MHz as the frequency also requires the ape opp 100 voltage, thus use the prcmu_opp_volt_scalable clock type. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index ca4a25ed844c..7bebf1f62c65 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -170,10 +170,11 @@ void u8500_clk_init(void) clk_register_clkdev(clk, NULL, "mtu0"); clk_register_clkdev(clk, NULL, "mtu1"); - clk = clk_reg_prcmu_gate("sdmmcclk", NULL, PRCMU_SDMMCCLK, CLK_IS_ROOT); + clk = clk_reg_prcmu_opp_volt_scalable("sdmmcclk", NULL, PRCMU_SDMMCCLK, + 100000000, + CLK_IS_ROOT|CLK_SET_RATE_GATE); clk_register_clkdev(clk, NULL, "sdmmc"); - clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk", PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE); clk_register_clkdev(clk, "dsihs2", "mcde"); -- cgit v1.2.3 From cdfed3b21f10ecd1566c7d5b8d40f05b18d52bda Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 21 Sep 2012 14:35:18 +0800 Subject: clk: fix return value check in of_fixed_clk_setup() In case of error, the function clk_register_fixed_rate() returns ERR_PTR() not NULL pointer. The NULL test in the return value check should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Mike Turquette --- drivers/clk/clk-fixed-rate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c index f5ec0eebd4d7..af78ed6b67ef 100644 --- a/drivers/clk/clk-fixed-rate.c +++ b/drivers/clk/clk-fixed-rate.c @@ -97,7 +97,7 @@ void __init of_fixed_clk_setup(struct device_node *node) of_property_read_string(node, "clock-output-names", &clk_name); clk = clk_register_fixed_rate(NULL, clk_name, NULL, CLK_IS_ROOT, rate); - if (clk) + if (!IS_ERR(clk)) of_clk_add_provider(node, of_clk_src_simple_get, clk); } EXPORT_SYMBOL_GPL(of_fixed_clk_setup); -- cgit v1.2.3 From 2968f85185b5806c7adf80e3329ddfe1ecc1aec4 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 7 Oct 2012 22:02:09 +0800 Subject: clk: fix return value check in sirfsoc_of_clk_init() In case of error, the function clk_register() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Mike Turquette --- drivers/clk/clk-prima2.c | 84 ++++++++++++++++++++++++------------------------ 1 file changed, 42 insertions(+), 42 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-prima2.c b/drivers/clk/clk-prima2.c index 517874fa6858..a203ecccdc4f 100644 --- a/drivers/clk/clk-prima2.c +++ b/drivers/clk/clk-prima2.c @@ -1054,118 +1054,118 @@ void __init sirfsoc_of_clk_init(void) /* These are always available (RTC and 26MHz OSC)*/ clk = clk_register_fixed_rate(NULL, "rtc", NULL, CLK_IS_ROOT, 32768); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register_fixed_rate(NULL, "osc", NULL, CLK_IS_ROOT, 26000000); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_pll1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_pll2.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_pll3.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_mem.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_sys.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_security.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b8030000.security"); clk = clk_register(NULL, &clk_dsp.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_gps.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "a8010000.gps"); clk = clk_register(NULL, &clk_mf.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_io.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "io"); clk = clk_register(NULL, &clk_cpu.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "cpu"); clk = clk_register(NULL, &clk_uart0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0050000.uart"); clk = clk_register(NULL, &clk_uart1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0060000.uart"); clk = clk_register(NULL, &clk_uart2.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0070000.uart"); clk = clk_register(NULL, &clk_tsc.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0110000.tsc"); clk = clk_register(NULL, &clk_i2c0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00e0000.i2c"); clk = clk_register(NULL, &clk_i2c1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00f0000.i2c"); clk = clk_register(NULL, &clk_spi0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00d0000.spi"); clk = clk_register(NULL, &clk_spi1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0170000.spi"); clk = clk_register(NULL, &clk_pwmc.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0130000.pwm"); clk = clk_register(NULL, &clk_efuse.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0140000.efusesys"); clk = clk_register(NULL, &clk_pulse.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0150000.pulsec"); clk = clk_register(NULL, &clk_dmac0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00b0000.dma-controller"); clk = clk_register(NULL, &clk_dmac1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0160000.dma-controller"); clk = clk_register(NULL, &clk_nand.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0030000.nand"); clk = clk_register(NULL, &clk_audio.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0040000.audio"); clk = clk_register(NULL, &clk_usp0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0080000.usp"); clk = clk_register(NULL, &clk_usp1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0090000.usp"); clk = clk_register(NULL, &clk_usp2.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00a0000.usp"); clk = clk_register(NULL, &clk_vip.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00c0000.vip"); clk = clk_register(NULL, &clk_gfx.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "98000000.graphics"); clk = clk_register(NULL, &clk_mm.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "a0000000.multimedia"); clk = clk_register(NULL, &clk_lcd.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "90010000.display"); clk = clk_register(NULL, &clk_vpp.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "90020000.vpp"); clk = clk_register(NULL, &clk_mmc01.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_mmc23.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_mmc45.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &usb_pll_clk_hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_usb0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00e0000.usb"); clk = clk_register(NULL, &clk_usb1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00f0000.usb"); } -- cgit v1.2.3 From f9f8c0438da2c6d6a4cd8af73097add3850d6084 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 14 Sep 2012 17:30:27 +0300 Subject: CLK: clk-twl6040: Initial clock driver for OMAP4+ McPDM fclk clock On OMAP4+ platforms the functional clock for the McPDM IP is suplied by the twl6040 codec (bit clock on the PDM bus). This common clock driver for twl6040 will register the mcpdm_fclk clock to be used by the McPDM driver to make sure that the needed clocks are available when needed. Signed-off-by: Peter Ujfalusi Signed-off-by: Mike Turquette --- drivers/clk/Kconfig | 8 +++ drivers/clk/Makefile | 1 + drivers/clk/clk-twl6040.c | 126 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 135 insertions(+) create mode 100644 drivers/clk/clk-twl6040.c (limited to 'drivers/clk') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index bace9e98f75d..3d0b78438521 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -53,4 +53,12 @@ config COMMON_CLK_MAX77686 ---help--- This driver supports Maxim 77686 crystal oscillator clock. +config CLK_TWL6040 + tristate "External McPDM functional clock from twl6040" + depends on TWL6040_CORE + ---help--- + Enable the external functional clock support on OMAP4+ platforms for + McPDM. McPDM module is using the external bit clock on the McPDM bus + as functional clock. + endmenu diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 71a25b91de00..2701235d5757 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -23,3 +23,4 @@ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o # Chip specific obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o +obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o diff --git a/drivers/clk/clk-twl6040.c b/drivers/clk/clk-twl6040.c new file mode 100644 index 000000000000..f4a3389c3d09 --- /dev/null +++ b/drivers/clk/clk-twl6040.c @@ -0,0 +1,126 @@ +/* +* TWL6040 clock module driver for OMAP4 McPDM functional clock +* +* Copyright (C) 2012 Texas Instruments Inc. +* Peter Ujfalusi +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* version 2 as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, but +* WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA +* 02110-1301 USA +* +*/ + +#include +#include +#include +#include +#include +#include + +struct twl6040_clk { + struct twl6040 *twl6040; + struct device *dev; + struct clk_hw mcpdm_fclk; + struct clk *clk; + int enabled; +}; + +static int twl6040_bitclk_is_enabled(struct clk_hw *hw) +{ + struct twl6040_clk *twl6040_clk = container_of(hw, struct twl6040_clk, + mcpdm_fclk); + return twl6040_clk->enabled; +} + +static int twl6040_bitclk_prepare(struct clk_hw *hw) +{ + struct twl6040_clk *twl6040_clk = container_of(hw, struct twl6040_clk, + mcpdm_fclk); + int ret; + + ret = twl6040_power(twl6040_clk->twl6040, 1); + if (!ret) + twl6040_clk->enabled = 1; + + return ret; +} + +static void twl6040_bitclk_unprepare(struct clk_hw *hw) +{ + struct twl6040_clk *twl6040_clk = container_of(hw, struct twl6040_clk, + mcpdm_fclk); + int ret; + + ret = twl6040_power(twl6040_clk->twl6040, 0); + if (!ret) + twl6040_clk->enabled = 0; +} + +static const struct clk_ops twl6040_mcpdm_ops = { + .is_enabled = twl6040_bitclk_is_enabled, + .prepare = twl6040_bitclk_prepare, + .unprepare = twl6040_bitclk_unprepare, +}; + +static struct clk_init_data wm831x_clkout_init = { + .name = "mcpdm_fclk", + .ops = &twl6040_mcpdm_ops, + .flags = CLK_IS_ROOT, +}; + +static int __devinit twl6040_clk_probe(struct platform_device *pdev) +{ + struct twl6040 *twl6040 = dev_get_drvdata(pdev->dev.parent); + struct twl6040_clk *clkdata; + + clkdata = devm_kzalloc(&pdev->dev, sizeof(*clkdata), GFP_KERNEL); + if (!clkdata) + return -ENOMEM; + + clkdata->dev = &pdev->dev; + clkdata->twl6040 = twl6040; + + clkdata->mcpdm_fclk.init = &wm831x_clkout_init; + clkdata->clk = clk_register(&pdev->dev, &clkdata->mcpdm_fclk); + if (!clkdata->clk) + return -EINVAL; + + dev_set_drvdata(&pdev->dev, clkdata); + + return 0; +} + +static int __devexit twl6040_clk_remove(struct platform_device *pdev) +{ + struct twl6040_clk *clkdata = dev_get_drvdata(&pdev->dev); + + clk_unregister(clkdata->clk); + + return 0; +} + +static struct platform_driver twl6040_clk_driver = { + .driver = { + .name = "twl6040-clk", + .owner = THIS_MODULE, + }, + .probe = twl6040_clk_probe, + .remove = __devexit_p(twl6040_clk_remove), +}; + +module_platform_driver(twl6040_clk_driver); + +MODULE_DESCRIPTION("TWL6040 clock driver for McPDM functional clock"); +MODULE_AUTHOR("Peter Ujfalusi "); +MODULE_ALIAS("platform:twl6040-clk"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From ed27ff1db869cc81a92bed6defb7d107f5a156ff Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Tue, 18 Sep 2012 15:17:47 +0100 Subject: clk: Versatile Express clock generators ("osc") driver This driver provides a common clock framework hardware driver for Versatile Express clock generators (a.k.a "osc") controlled via the config bus. Signed-off-by: Pawel Moll Signed-off-by: Mike Turquette --- drivers/clk/versatile/Makefile | 1 + drivers/clk/versatile/clk-vexpress-osc.c | 146 +++++++++++++++++++++++++++++++ 2 files changed, 147 insertions(+) create mode 100644 drivers/clk/versatile/clk-vexpress-osc.c (limited to 'drivers/clk') diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile index c0a0f6478798..1e49a7afcf44 100644 --- a/drivers/clk/versatile/Makefile +++ b/drivers/clk/versatile/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_ICST) += clk-icst.o obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o +obj-$(CONFIG_VEXPRESS_CONFIG) += clk-vexpress-osc.o diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c new file mode 100644 index 000000000000..dcb6ae0a0425 --- /dev/null +++ b/drivers/clk/versatile/clk-vexpress-osc.c @@ -0,0 +1,146 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#define pr_fmt(fmt) "vexpress-osc: " fmt + +#include +#include +#include +#include +#include +#include +#include + +struct vexpress_osc { + struct vexpress_config_func *func; + struct clk_hw hw; + unsigned long rate_min; + unsigned long rate_max; +}; + +#define to_vexpress_osc(osc) container_of(osc, struct vexpress_osc, hw) + +static unsigned long vexpress_osc_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct vexpress_osc *osc = to_vexpress_osc(hw); + u32 rate; + + vexpress_config_read(osc->func, 0, &rate); + + return rate; +} + +static long vexpress_osc_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct vexpress_osc *osc = to_vexpress_osc(hw); + + if (WARN_ON(osc->rate_min && rate < osc->rate_min)) + rate = osc->rate_min; + + if (WARN_ON(osc->rate_max && rate > osc->rate_max)) + rate = osc->rate_max; + + return rate; +} + +static int vexpress_osc_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct vexpress_osc *osc = to_vexpress_osc(hw); + + return vexpress_config_write(osc->func, 0, rate); +} + +static struct clk_ops vexpress_osc_ops = { + .recalc_rate = vexpress_osc_recalc_rate, + .round_rate = vexpress_osc_round_rate, + .set_rate = vexpress_osc_set_rate, +}; + + +struct clk * __init vexpress_osc_setup(struct device *dev) +{ + struct clk_init_data init; + struct vexpress_osc *osc = kzalloc(sizeof(*osc), GFP_KERNEL); + + if (!osc) + return NULL; + + osc->func = vexpress_config_func_get_by_dev(dev); + if (!osc->func) { + kfree(osc); + return NULL; + } + + init.name = dev_name(dev); + init.ops = &vexpress_osc_ops; + init.flags = CLK_IS_ROOT; + init.num_parents = 0; + osc->hw.init = &init; + + return clk_register(NULL, &osc->hw); +} + +void __init vexpress_osc_of_setup(struct device_node *node) +{ + struct clk_init_data init; + struct vexpress_osc *osc; + struct clk *clk; + u32 range[2]; + + osc = kzalloc(sizeof(*osc), GFP_KERNEL); + if (!osc) + goto error; + + osc->func = vexpress_config_func_get_by_node(node); + if (!osc->func) { + pr_err("Failed to obtain config func for node '%s'!\n", + node->name); + goto error; + } + + if (of_property_read_u32_array(node, "freq-range", range, + ARRAY_SIZE(range)) == 0) { + osc->rate_min = range[0]; + osc->rate_max = range[1]; + } + + of_property_read_string(node, "clock-output-names", &init.name); + if (!init.name) + init.name = node->name; + + init.ops = &vexpress_osc_ops; + init.flags = CLK_IS_ROOT; + init.num_parents = 0; + + osc->hw.init = &init; + + clk = clk_register(NULL, &osc->hw); + if (IS_ERR(clk)) { + pr_err("Failed to register clock '%s'!\n", init.name); + goto error; + } + + of_clk_add_provider(node, of_clk_src_simple_get, clk); + + pr_debug("Registered clock '%s'\n", init.name); + + return; + +error: + if (osc->func) + vexpress_config_func_put(osc->func); + kfree(osc); +} -- cgit v1.2.3 From bcd6f569e87471d7f104bd9497f0b516a3b12e32 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Tue, 18 Sep 2012 15:17:48 +0100 Subject: clk: Common clocks implementation for Versatile Express This patch adds a DT and non-DT based implementation of the common clock infrastructure for Versatile Express platform. It registers (statically or using DT) all required fixed clocks, initialises motherboard's SP810 cell (that provides clocks for SP804 timers) and explicitly registers VE "osc" driver, to make the clock generators available early. Signed-off-by: Pawel Moll Signed-off-by: Mike Turquette --- drivers/clk/Kconfig | 8 +- drivers/clk/versatile/Makefile | 1 + drivers/clk/versatile/clk-vexpress.c | 142 +++++++++++++++++++++++++++++++++++ 3 files changed, 148 insertions(+), 3 deletions(-) create mode 100644 drivers/clk/versatile/clk-vexpress.c (limited to 'drivers/clk') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 3d0b78438521..823f62d900ba 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -42,10 +42,12 @@ config COMMON_CLK_WM831X config COMMON_CLK_VERSATILE bool "Clock driver for ARM Reference designs" - depends on ARCH_INTEGRATOR || ARCH_REALVIEW + depends on ARCH_INTEGRATOR || ARCH_REALVIEW || ARCH_VEXPRESS ---help--- - Supports clocking on ARM Reference designs Integrator/AP, - Integrator/CP, RealView PB1176, EB, PB11MP and PBX. + Supports clocking on ARM Reference designs: + - Integrator/AP and Integrator/CP + - RealView PB1176, EB, PB11MP and PBX + - Versatile Express config COMMON_CLK_MAX77686 tristate "Clock driver for Maxim 77686 MFD" diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile index 1e49a7afcf44..c776053e5bb4 100644 --- a/drivers/clk/versatile/Makefile +++ b/drivers/clk/versatile/Makefile @@ -2,4 +2,5 @@ obj-$(CONFIG_ICST) += clk-icst.o obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o +obj-$(CONFIG_ARCH_VEXPRESS) += clk-vexpress.o obj-$(CONFIG_VEXPRESS_CONFIG) += clk-vexpress-osc.o diff --git a/drivers/clk/versatile/clk-vexpress.c b/drivers/clk/versatile/clk-vexpress.c new file mode 100644 index 000000000000..c742ac7c60bb --- /dev/null +++ b/drivers/clk/versatile/clk-vexpress.c @@ -0,0 +1,142 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#include +#include +#include +#include +#include +#include + +#include + +static struct clk *vexpress_sp810_timerclken[4]; +static DEFINE_SPINLOCK(vexpress_sp810_lock); + +static void __init vexpress_sp810_init(void __iomem *base) +{ + int i; + + if (WARN_ON(!base)) + return; + + for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++) { + char name[12]; + const char *parents[] = { + "v2m:refclk32khz", /* REFCLK */ + "v2m:refclk1mhz" /* TIMCLK */ + }; + + snprintf(name, ARRAY_SIZE(name), "timerclken%d", i); + + vexpress_sp810_timerclken[i] = clk_register_mux(NULL, name, + parents, 2, 0, base + SCCTRL, + SCCTRL_TIMERENnSEL_SHIFT(i), 1, + 0, &vexpress_sp810_lock); + + if (WARN_ON(IS_ERR(vexpress_sp810_timerclken[i]))) + break; + } +} + + +static const char * const vexpress_clk_24mhz_periphs[] __initconst = { + "mb:uart0", "mb:uart1", "mb:uart2", "mb:uart3", + "mb:mmci", "mb:kmi0", "mb:kmi1" +}; + +void __init vexpress_clk_init(void __iomem *sp810_base) +{ + struct clk *clk; + int i; + + clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL, + CLK_IS_ROOT, 0); + WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL)); + + clk = clk_register_fixed_rate(NULL, "v2m:clk_24mhz", NULL, + CLK_IS_ROOT, 24000000); + for (i = 0; i < ARRAY_SIZE(vexpress_clk_24mhz_periphs); i++) + WARN_ON(clk_register_clkdev(clk, NULL, + vexpress_clk_24mhz_periphs[i])); + + clk = clk_register_fixed_rate(NULL, "v2m:refclk32khz", NULL, + CLK_IS_ROOT, 32768); + WARN_ON(clk_register_clkdev(clk, NULL, "v2m:wdt")); + + clk = clk_register_fixed_rate(NULL, "v2m:refclk1mhz", NULL, + CLK_IS_ROOT, 1000000); + + vexpress_sp810_init(sp810_base); + + for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++) + WARN_ON(clk_set_parent(vexpress_sp810_timerclken[i], clk)); + + WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[0], + "v2m-timer0", "sp804")); + WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[1], + "v2m-timer1", "sp804")); +} + +#if defined(CONFIG_OF) + +struct clk *vexpress_sp810_of_get(struct of_phandle_args *clkspec, void *data) +{ + if (WARN_ON(clkspec->args_count != 1 || clkspec->args[0] > + ARRAY_SIZE(vexpress_sp810_timerclken))) + return NULL; + + return vexpress_sp810_timerclken[clkspec->args[0]]; +} + +static const __initconst struct of_device_id vexpress_fixed_clk_match[] = { + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, }, + { .compatible = "arm,vexpress-osc", .data = vexpress_osc_of_setup, }, + {} +}; + +void __init vexpress_clk_of_init(void) +{ + struct device_node *node; + struct clk *clk; + struct clk *refclk, *timclk; + + of_clk_init(vexpress_fixed_clk_match); + + node = of_find_compatible_node(NULL, NULL, "arm,sp810"); + vexpress_sp810_init(of_iomap(node, 0)); + of_clk_add_provider(node, vexpress_sp810_of_get, NULL); + + /* Select "better" (faster) parent for SP804 timers */ + refclk = of_clk_get_by_name(node, "refclk"); + timclk = of_clk_get_by_name(node, "timclk"); + if (!WARN_ON(IS_ERR(refclk) || IS_ERR(timclk))) { + int i = 0; + + if (clk_get_rate(refclk) > clk_get_rate(timclk)) + clk = refclk; + else + clk = timclk; + + for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++) + WARN_ON(clk_set_parent(vexpress_sp810_timerclken[i], + clk)); + } + + WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[0], + "v2m-timer0", "sp804")); + WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[1], + "v2m-timer1", "sp804")); +} + +#endif -- cgit v1.2.3 From 980f58a45e04b248e9dd01b0eba510a3384160db Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 24 Sep 2012 13:38:03 -0700 Subject: clk: wm831x: Fix clk_register() error code checking clk_register() returns an ERR_PTR upon failure, not NULL. Fix these error paths. Acked-by: Mark Brown Signed-off-by: Stephen Boyd Signed-off-by: Mike Turquette --- drivers/clk/clk-wm831x.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c index e7b7765e85f3..eb1afafca037 100644 --- a/drivers/clk/clk-wm831x.c +++ b/drivers/clk/clk-wm831x.c @@ -371,20 +371,20 @@ static __devinit int wm831x_clk_probe(struct platform_device *pdev) clkdata->xtal_hw.init = &wm831x_xtal_init; clkdata->xtal = clk_register(&pdev->dev, &clkdata->xtal_hw); - if (!clkdata->xtal) - return -EINVAL; + if (IS_ERR(clkdata->xtal)) + return PTR_ERR(clkdata->xtal); clkdata->fll_hw.init = &wm831x_fll_init; clkdata->fll = clk_register(&pdev->dev, &clkdata->fll_hw); - if (!clkdata->fll) { - ret = -EINVAL; + if (IS_ERR(clkdata->fll)) { + ret = PTR_ERR(clkdata->fll); goto err_xtal; } clkdata->clkout_hw.init = &wm831x_clkout_init; clkdata->clkout = clk_register(&pdev->dev, &clkdata->clkout_hw); - if (!clkdata->clkout) { - ret = -EINVAL; + if (IS_ERR(clkdata->clkout)) { + ret = PTR_ERR(clkdata->clkout); goto err_fll; } -- cgit v1.2.3 From 46c8773a58010d31f228e148b8b774d94cc9810d Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 24 Sep 2012 13:38:04 -0700 Subject: clk: Add devm_clk_{register,unregister}() Some clock drivers can be simplified if devres takes care of unregistering any registered clocks along error paths. Introduce devm_clk_register() so that clock drivers get unregistration for free along with simplified error paths. Signed-off-by: Stephen Boyd Signed-off-by: Mike Turquette --- drivers/clk/clk.c | 111 +++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 90 insertions(+), 21 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index bbe52c4ae7ca..2fd28ddd06c9 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -17,6 +17,7 @@ #include #include #include +#include static DEFINE_SPINLOCK(enable_lock); static DEFINE_MUTEX(prepare_lock); @@ -1361,28 +1362,9 @@ struct clk *__clk_register(struct device *dev, struct clk_hw *hw) } EXPORT_SYMBOL_GPL(__clk_register); -/** - * clk_register - allocate a new clock, register it and return an opaque cookie - * @dev: device that is registering this clock - * @hw: link to hardware-specific clock data - * - * clk_register is the primary interface for populating the clock tree with new - * clock nodes. It returns a pointer to the newly allocated struct clk which - * cannot be dereferenced by driver code but may be used in conjuction with the - * rest of the clock API. In the event of an error clk_register will return an - * error code; drivers must test for an error code after calling clk_register. - */ -struct clk *clk_register(struct device *dev, struct clk_hw *hw) +static int _clk_register(struct device *dev, struct clk_hw *hw, struct clk *clk) { int i, ret; - struct clk *clk; - - clk = kzalloc(sizeof(*clk), GFP_KERNEL); - if (!clk) { - pr_err("%s: could not allocate clk\n", __func__); - ret = -ENOMEM; - goto fail_out; - } clk->name = kstrdup(hw->init->name, GFP_KERNEL); if (!clk->name) { @@ -1420,7 +1402,7 @@ struct clk *clk_register(struct device *dev, struct clk_hw *hw) ret = __clk_init(dev, clk); if (!ret) - return clk; + return 0; fail_parent_names_copy: while (--i >= 0) @@ -1429,6 +1411,36 @@ fail_parent_names_copy: fail_parent_names: kfree(clk->name); fail_name: + return ret; +} + +/** + * clk_register - allocate a new clock, register it and return an opaque cookie + * @dev: device that is registering this clock + * @hw: link to hardware-specific clock data + * + * clk_register is the primary interface for populating the clock tree with new + * clock nodes. It returns a pointer to the newly allocated struct clk which + * cannot be dereferenced by driver code but may be used in conjuction with the + * rest of the clock API. In the event of an error clk_register will return an + * error code; drivers must test for an error code after calling clk_register. + */ +struct clk *clk_register(struct device *dev, struct clk_hw *hw) +{ + int ret; + struct clk *clk; + + clk = kzalloc(sizeof(*clk), GFP_KERNEL); + if (!clk) { + pr_err("%s: could not allocate clk\n", __func__); + ret = -ENOMEM; + goto fail_out; + } + + ret = _clk_register(dev, hw, clk); + if (!ret) + return clk; + kfree(clk); fail_out: return ERR_PTR(ret); @@ -1444,6 +1456,63 @@ EXPORT_SYMBOL_GPL(clk_register); void clk_unregister(struct clk *clk) {} EXPORT_SYMBOL_GPL(clk_unregister); +static void devm_clk_release(struct device *dev, void *res) +{ + clk_unregister(res); +} + +/** + * devm_clk_register - resource managed clk_register() + * @dev: device that is registering this clock + * @hw: link to hardware-specific clock data + * + * Managed clk_register(). Clocks returned from this function are + * automatically clk_unregister()ed on driver detach. See clk_register() for + * more information. + */ +struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw) +{ + struct clk *clk; + int ret; + + clk = devres_alloc(devm_clk_release, sizeof(*clk), GFP_KERNEL); + if (!clk) + return ERR_PTR(-ENOMEM); + + ret = _clk_register(dev, hw, clk); + if (!ret) { + devres_add(dev, clk); + } else { + devres_free(clk); + clk = ERR_PTR(ret); + } + + return clk; +} +EXPORT_SYMBOL_GPL(devm_clk_register); + +static int devm_clk_match(struct device *dev, void *res, void *data) +{ + struct clk *c = res; + if (WARN_ON(!c)) + return 0; + return c == data; +} + +/** + * devm_clk_unregister - resource managed clk_unregister() + * @clk: clock to unregister + * + * Deallocate a clock allocated with devm_clk_register(). Normally + * this function will not need to be called and the resource management + * code will ensure that the resource is freed. + */ +void devm_clk_unregister(struct device *dev, struct clk *clk) +{ + WARN_ON(devres_release(dev, devm_clk_release, devm_clk_match, clk)); +} +EXPORT_SYMBOL_GPL(devm_clk_unregister); + /*** clk rate change notifiers ***/ /** -- cgit v1.2.3 From 9be9d482bcf5a0a3e0ae131a98573b9e2d358915 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 24 Sep 2012 13:38:05 -0700 Subject: clk: wm831x: Use devm_clk_register() to simplify code Move this driver to use devm_clk_register() to simplify some error paths and reduce lines of code. Acked-by: Mark Brown Signed-off-by: Stephen Boyd Signed-off-by: Mike Turquette --- drivers/clk/clk-wm831x.c | 30 +++++++----------------------- 1 file changed, 7 insertions(+), 23 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c index eb1afafca037..db4fbf20ffd7 100644 --- a/drivers/clk/clk-wm831x.c +++ b/drivers/clk/clk-wm831x.c @@ -370,43 +370,27 @@ static __devinit int wm831x_clk_probe(struct platform_device *pdev) clkdata->xtal_ena = ret & WM831X_XTAL_ENA; clkdata->xtal_hw.init = &wm831x_xtal_init; - clkdata->xtal = clk_register(&pdev->dev, &clkdata->xtal_hw); + clkdata->xtal = devm_clk_register(&pdev->dev, &clkdata->xtal_hw); if (IS_ERR(clkdata->xtal)) return PTR_ERR(clkdata->xtal); clkdata->fll_hw.init = &wm831x_fll_init; - clkdata->fll = clk_register(&pdev->dev, &clkdata->fll_hw); - if (IS_ERR(clkdata->fll)) { - ret = PTR_ERR(clkdata->fll); - goto err_xtal; - } + clkdata->fll = devm_clk_register(&pdev->dev, &clkdata->fll_hw); + if (IS_ERR(clkdata->fll)) + return PTR_ERR(clkdata->fll); clkdata->clkout_hw.init = &wm831x_clkout_init; - clkdata->clkout = clk_register(&pdev->dev, &clkdata->clkout_hw); - if (IS_ERR(clkdata->clkout)) { - ret = PTR_ERR(clkdata->clkout); - goto err_fll; - } + clkdata->clkout = devm_clk_register(&pdev->dev, &clkdata->clkout_hw); + if (IS_ERR(clkdata->clkout)) + return PTR_ERR(clkdata->clkout); dev_set_drvdata(&pdev->dev, clkdata); return 0; - -err_fll: - clk_unregister(clkdata->fll); -err_xtal: - clk_unregister(clkdata->xtal); - return ret; } static int __devexit wm831x_clk_remove(struct platform_device *pdev) { - struct wm831x_clk *clkdata = dev_get_drvdata(&pdev->dev); - - clk_unregister(clkdata->clkout); - clk_unregister(clkdata->fll); - clk_unregister(clkdata->xtal); - return 0; } -- cgit v1.2.3 From b7a5bcd5cdef34093f340029a1a097c136c5369b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 18 Oct 2012 17:58:29 +0200 Subject: clk/ux500: explicitly include register header The ux500 clock driver file named u8500_clk.c does not compile if it loose implicit dependencies to (I have no clue what files will include this) which manifests itself as I'm experimenting with SPARSE_IRQ so make the dependency explicit. Cc: Mike Turquette Acked-by: Ulf Hansson Acked-by: Arnd Bergmann Signed-off-by: Linus Walleij --- drivers/clk/ux500/u8500_clk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index ca4a25ed844c..ab30ce87614c 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -12,7 +12,7 @@ #include #include #include - +#include #include "clk.h" void u8500_clk_init(void) -- cgit v1.2.3 From a816d250e866b01bd18b0dd2bcbe5f1951310094 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Wed, 10 Oct 2012 13:42:27 +0200 Subject: clk: ux500: Support for prcmu_scalable_rate clock The prcmu_scalable_rate clock can change rate but is not gateable. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Mike Turquette --- drivers/clk/ux500/clk-prcmu.c | 17 +++++++++++++++++ drivers/clk/ux500/clk.h | 6 ++++++ 2 files changed, 23 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/clk-prcmu.c b/drivers/clk/ux500/clk-prcmu.c index 04577ca6a308..74faa7e3cf59 100644 --- a/drivers/clk/ux500/clk-prcmu.c +++ b/drivers/clk/ux500/clk-prcmu.c @@ -187,6 +187,13 @@ static struct clk_ops clk_prcmu_gate_ops = { .recalc_rate = clk_prcmu_recalc_rate, }; +static struct clk_ops clk_prcmu_scalable_rate_ops = { + .is_enabled = clk_prcmu_is_enabled, + .recalc_rate = clk_prcmu_recalc_rate, + .round_rate = clk_prcmu_round_rate, + .set_rate = clk_prcmu_set_rate, +}; + static struct clk_ops clk_prcmu_rate_ops = { .is_enabled = clk_prcmu_is_enabled, .recalc_rate = clk_prcmu_recalc_rate, @@ -278,6 +285,16 @@ struct clk *clk_reg_prcmu_gate(const char *name, &clk_prcmu_gate_ops); } +struct clk *clk_reg_prcmu_scalable_rate(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags) +{ + return clk_reg_prcmu(name, parent_name, cg_sel, rate, flags, + &clk_prcmu_scalable_rate_ops); +} + struct clk *clk_reg_prcmu_rate(const char *name, const char *parent_name, u8 cg_sel, diff --git a/drivers/clk/ux500/clk.h b/drivers/clk/ux500/clk.h index f36eeedca493..c3e449169a83 100644 --- a/drivers/clk/ux500/clk.h +++ b/drivers/clk/ux500/clk.h @@ -35,6 +35,12 @@ struct clk *clk_reg_prcmu_gate(const char *name, u8 cg_sel, unsigned long flags); +struct clk *clk_reg_prcmu_scalable_rate(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags); + struct clk *clk_reg_prcmu_rate(const char *name, const char *parent_name, u8 cg_sel, -- cgit v1.2.3 From d6e99fa4f45a5f3c3029979680cf69c5a0579e6b Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Wed, 10 Oct 2012 13:42:28 +0200 Subject: clk: ux500: Add armss clk and fixup smp_twd clk for u8500 The new armss clk is a prcmu_scalable_rate clk which represents the ARMSS clk. This then makes it possible to convert the smp_twd clk to a fixed factor clock type, using a fixed divider of 2 and with the armss clk as parent. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 7bebf1f62c65..955110db2440 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -206,16 +206,18 @@ void u8500_clk_init(void) clk_register_clkdev(clk, "dsilp2", "dsilink.2"); clk_register_clkdev(clk, "dsilp2", "mcde"); - clk = clk_reg_prcmu_rate("smp_twd", NULL, PRCMU_ARMSS, - CLK_IS_ROOT|CLK_GET_RATE_NOCACHE| - CLK_IGNORE_UNUSED); + clk = clk_reg_prcmu_scalable_rate("armss", NULL, + PRCMU_ARMSS, 0, CLK_IS_ROOT|CLK_IGNORE_UNUSED); + clk_register_clkdev(clk, "armss", NULL); + + clk = clk_register_fixed_factor(NULL, "smp_twd", "armss", + CLK_IGNORE_UNUSED, 1, 2); clk_register_clkdev(clk, NULL, "smp_twd"); /* * FIXME: Add special handled PRCMU clocks here: - * 1. clk_arm, use PRCMU_ARMCLK. - * 2. clkout0yuv, use PRCMU as parent + need regulator + pinctrl. - * 3. ab9540_clkout1yuv, see clkout0yuv + * 1. clkout0yuv, use PRCMU as parent + need regulator + pinctrl. + * 2. ab9540_clkout1yuv, see clkout0yuv */ /* PRCC P-clocks */ -- cgit v1.2.3 From 0de9f23a2859a4aec5db210887c7457e0c24b9ca Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 9 Oct 2012 10:46:00 +0800 Subject: clk: fix return value check in bcm2835_init_clocks() In case of error, the function clk_register_fixed_rate() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Acked-by: Stephen Warren Signed-off-by: Mike Turquette --- drivers/clk/clk-bcm2835.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-bcm2835.c b/drivers/clk/clk-bcm2835.c index 67ad16b20b81..b61ee2c5af84 100644 --- a/drivers/clk/clk-bcm2835.c +++ b/drivers/clk/clk-bcm2835.c @@ -33,17 +33,17 @@ void __init bcm2835_init_clocks(void) clk = clk_register_fixed_rate(NULL, "sys_pclk", NULL, CLK_IS_ROOT, 250000000); - if (!clk) + if (IS_ERR(clk)) pr_err("sys_pclk not registered\n"); clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 126000000); - if (!clk) + if (IS_ERR(clk)) pr_err("apb_pclk not registered\n"); clk = clk_register_fixed_rate(NULL, "uart0_pclk", NULL, CLK_IS_ROOT, 3000000); - if (!clk) + if (IS_ERR(clk)) pr_err("uart0_pclk not registered\n"); ret = clk_register_clkdev(clk, NULL, "20201000.uart"); if (ret) @@ -51,7 +51,7 @@ void __init bcm2835_init_clocks(void) clk = clk_register_fixed_rate(NULL, "uart1_pclk", NULL, CLK_IS_ROOT, 125000000); - if (!clk) + if (IS_ERR(clk)) pr_err("uart1_pclk not registered\n"); ret = clk_register_clkdev(clk, NULL, "20215000.uart"); if (ret) -- cgit v1.2.3 From 973e1d1de0f8af2be7f8c94418f2cda559bd7543 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Thu, 18 Oct 2012 22:26:53 +1300 Subject: CLK: vt8500: Fix SDMMC clk special cases This patch adds some additional handling for the SDMMC special case in round_rate and set_rate which results in invalid divisor messages at boot time. Signed-off-by: Tony Prisk Signed-off-by: Mike Turquette --- drivers/clk/clk-vt8500.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c index a885600f5270..fe25570874d6 100644 --- a/drivers/clk/clk-vt8500.c +++ b/drivers/clk/clk-vt8500.c @@ -120,8 +120,17 @@ static unsigned long vt8500_dclk_recalc_rate(struct clk_hw *hw, static long vt8500_dclk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) { + struct clk_device *cdev = to_clk_device(hw); u32 divisor = *prate / rate; + /* + * If this is a request for SDMMC we have to adjust the divisor + * when >31 to use the fixed predivisor + */ + if ((cdev->div_mask == 0x3F) && (divisor > 31)) { + divisor = 64 * ((divisor / 64) + 1); + } + return *prate / divisor; } @@ -135,6 +144,15 @@ static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate, if (divisor == cdev->div_mask + 1) divisor = 0; + /* SDMMC mask may need to be corrected before testing if its valid */ + if ((cdev->div_mask == 0x3F) && (divisor > 31)) { + /* + * Bit 5 is a fixed /64 predivisor. If the requested divisor + * is >31 then correct for the fixed divisor being required. + */ + divisor = 0x20 + (divisor / 64); + } + if (divisor > cdev->div_mask) { pr_err("%s: invalid divisor for clock\n", __func__); return -EINVAL; -- cgit v1.2.3 From 1c73491a571c234d9b0b5e83f19e40cbb2c1b633 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 22 Oct 2012 15:57:57 +0200 Subject: clk: ux500: Register i2c clock lookups for u8500 Cc: Ben Dooks Cc: Wolfram Sang Acked-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Ulf Hansson Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 955110db2440..c33b09c583ff 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -231,6 +231,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE, BIT(2), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1"); + clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE, BIT(3), 0); clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE, @@ -242,6 +244,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE, BIT(6), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2"); clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE, BIT(7), 0); @@ -258,11 +261,14 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE, BIT(10), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4"); + clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE, BIT(11), 0); clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE, BIT(0), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3"); clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE, BIT(1), 0); @@ -287,7 +293,6 @@ void u8500_clk_init(void) BIT(6), 0); clk_register_clkdev(clk, "apb_pclk", "sdi1"); - clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE, BIT(7), 0); clk_register_clkdev(clk, "apb_pclk", "sdi3"); @@ -321,8 +326,10 @@ void u8500_clk_init(void) BIT(1), 0); clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE, BIT(2), 0); + clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE, BIT(3), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0"); clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE, BIT(4), 0); @@ -404,6 +411,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.1"); + clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk", U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk", @@ -415,17 +424,23 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.2"); + clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk", U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); /* FIXME: Redefinition of BIT(3). */ + clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.4"); + clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE); /* Periph2 */ clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk", U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.3"); clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk", U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE); @@ -455,8 +470,10 @@ void u8500_clk_init(void) U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE); clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE); + clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk", U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.0"); clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk", U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE); -- cgit v1.2.3 From eb1d7eae04ed961f81b1ce67da7e384ff74f94c6 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 22 Oct 2012 15:57:58 +0200 Subject: clk: ux500: Register ssp clock lookups for u8500 Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index c33b09c583ff..9be9b67a1f78 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -324,8 +324,11 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE, BIT(1), 0); + clk_register_clkdev(clk, "apb_pclk", "ssp0"); + clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE, BIT(2), 0); + clk_register_clkdev(clk, "apb_pclk", "ssp1"); clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE, BIT(3), 0); @@ -468,8 +471,11 @@ void u8500_clk_init(void) /* Periph3 */ clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ssp0"); + clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ssp1"); clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk", U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE); -- cgit v1.2.3 From b89f8b5ec85e99386f6a705a90f895fcb9287c08 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 22 Oct 2012 15:57:59 +0200 Subject: clk: ux500: Register msp clock lookups for u8500 Cc: Mark Brown Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 9be9b67a1f78..e48d803773d6 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -235,8 +235,13 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE, BIT(3), 0); + clk_register_clkdev(clk, "apb_pclk", "msp0"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.0"); + clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE, BIT(4), 0); + clk_register_clkdev(clk, "apb_pclk", "msp1"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.1"); clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE, BIT(5), 0); @@ -265,6 +270,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE, BIT(11), 0); + clk_register_clkdev(clk, "apb_pclk", "msp3"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.3"); clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE, BIT(0), 0); @@ -288,6 +295,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE, BIT(5), 0); + clk_register_clkdev(clk, "apb_pclk", "msp2"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.2"); clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE, BIT(6), 0); @@ -418,8 +427,13 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk", U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp0"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.0"); + clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp1"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.1"); clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk", U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE); @@ -439,6 +453,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp3"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.3"); /* Periph2 */ clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk", @@ -451,6 +467,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk", U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp2"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.2"); clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk", U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE); -- cgit v1.2.3 From 86497f54556d70df60ef3030bddcb544f1fb8746 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 22 Oct 2012 15:58:00 +0200 Subject: clk: ux500: Update rtc clock lookup for u8500 Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index e48d803773d6..668839ff67f5 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -40,7 +40,7 @@ void u8500_clk_init(void) CLK_IS_ROOT|CLK_IGNORE_UNUSED, 32768); clk_register_clkdev(clk, "clk32k", NULL); - clk_register_clkdev(clk, NULL, "rtc-pl031"); + clk_register_clkdev(clk, "apb_pclk", "rtc-pl031"); /* PRCMU clocks */ fw_version = prcmu_get_fw_version(); -- cgit v1.2.3 From 4a0ae7befc92765c05b4bdd79e931a2058ea9fb7 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 22 Oct 2012 15:58:01 +0200 Subject: clk: ux500: Register slimbus clock lookups for u8500 At the same time the prcc bit for the kclk is corrected to bit 8 instead of 3. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 668839ff67f5..4ec6f60e3725 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -257,6 +257,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE, BIT(8), 0); + clk_register_clkdev(clk, "apb_pclk", "slimbus0"); clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE, BIT(9), 0); @@ -444,8 +445,8 @@ void u8500_clk_init(void) clk_register_clkdev(clk, NULL, "nmk-i2c.2"); clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk", - U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); - /* FIXME: Redefinition of BIT(3). */ + U8500_CLKRST1_BASE, BIT(8), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "slimbus0"); clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE); -- cgit v1.2.3 From 4cf2d3b1b6ff9b7b6af1d2dbf1b63aa465250bc2 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 22 Oct 2012 15:57:57 +0200 Subject: clk: ux500: Register i2c clock lookups for u8500 Cc: Ben Dooks Cc: Wolfram Sang Acked-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Ulf Hansson Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index ca4a25ed844c..7ad01aa30efe 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -228,6 +228,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE, BIT(2), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1"); + clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE, BIT(3), 0); clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE, @@ -239,6 +241,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE, BIT(6), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2"); clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE, BIT(7), 0); @@ -255,11 +258,14 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE, BIT(10), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4"); + clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE, BIT(11), 0); clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE, BIT(0), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3"); clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE, BIT(1), 0); @@ -284,7 +290,6 @@ void u8500_clk_init(void) BIT(6), 0); clk_register_clkdev(clk, "apb_pclk", "sdi1"); - clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE, BIT(7), 0); clk_register_clkdev(clk, "apb_pclk", "sdi3"); @@ -318,8 +323,10 @@ void u8500_clk_init(void) BIT(1), 0); clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE, BIT(2), 0); + clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE, BIT(3), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0"); clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE, BIT(4), 0); @@ -401,6 +408,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.1"); + clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk", U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk", @@ -412,17 +421,23 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.2"); + clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk", U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); /* FIXME: Redefinition of BIT(3). */ + clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.4"); + clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE); /* Periph2 */ clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk", U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.3"); clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk", U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE); @@ -452,8 +467,10 @@ void u8500_clk_init(void) U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE); clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE); + clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk", U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.0"); clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk", U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE); -- cgit v1.2.3 From 08b1f1c7b9bf0f6fe9e2ce3369928955554a958b Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 22 Oct 2012 15:57:58 +0200 Subject: clk: ux500: Register ssp clock lookups for u8500 Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 7ad01aa30efe..36ef41d90d67 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -321,8 +321,11 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE, BIT(1), 0); + clk_register_clkdev(clk, "apb_pclk", "ssp0"); + clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE, BIT(2), 0); + clk_register_clkdev(clk, "apb_pclk", "ssp1"); clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE, BIT(3), 0); @@ -465,8 +468,11 @@ void u8500_clk_init(void) /* Periph3 */ clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ssp0"); + clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ssp1"); clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk", U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE); -- cgit v1.2.3 From 15e66cd8d029de8055822a98c5a72a4414ffc0a6 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 22 Oct 2012 15:57:59 +0200 Subject: clk: ux500: Register msp clock lookups for u8500 Cc: Mark Brown Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 36ef41d90d67..be843ba1f49a 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -232,8 +232,13 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE, BIT(3), 0); + clk_register_clkdev(clk, "apb_pclk", "msp0"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.0"); + clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE, BIT(4), 0); + clk_register_clkdev(clk, "apb_pclk", "msp1"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.1"); clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE, BIT(5), 0); @@ -262,6 +267,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE, BIT(11), 0); + clk_register_clkdev(clk, "apb_pclk", "msp3"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.3"); clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE, BIT(0), 0); @@ -285,6 +292,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE, BIT(5), 0); + clk_register_clkdev(clk, "apb_pclk", "msp2"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.2"); clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE, BIT(6), 0); @@ -415,8 +424,13 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk", U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp0"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.0"); + clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp1"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.1"); clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk", U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE); @@ -436,6 +450,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp3"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.3"); /* Periph2 */ clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk", @@ -448,6 +464,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk", U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp2"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.2"); clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk", U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE); -- cgit v1.2.3 From d4915cf5f6190b94411c3102078ac4b86149fe59 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 22 Oct 2012 15:58:00 +0200 Subject: clk: ux500: Update rtc clock lookup for u8500 Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index be843ba1f49a..0aae92956844 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -40,7 +40,7 @@ void u8500_clk_init(void) CLK_IS_ROOT|CLK_IGNORE_UNUSED, 32768); clk_register_clkdev(clk, "clk32k", NULL); - clk_register_clkdev(clk, NULL, "rtc-pl031"); + clk_register_clkdev(clk, "apb_pclk", "rtc-pl031"); /* PRCMU clocks */ fw_version = prcmu_get_fw_version(); -- cgit v1.2.3 From 3d930678034e756d0960d214412d344772b21109 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 22 Oct 2012 15:58:01 +0200 Subject: clk: ux500: Register slimbus clock lookups for u8500 At the same time the prcc bit for the kclk is corrected to bit 8 instead of 3. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 0aae92956844..e2c17d187d98 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -254,6 +254,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE, BIT(8), 0); + clk_register_clkdev(clk, "apb_pclk", "slimbus0"); clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE, BIT(9), 0); @@ -441,8 +442,8 @@ void u8500_clk_init(void) clk_register_clkdev(clk, NULL, "nmk-i2c.2"); clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk", - U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); - /* FIXME: Redefinition of BIT(3). */ + U8500_CLKRST1_BASE, BIT(8), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "slimbus0"); clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE); -- cgit v1.2.3 From 45aa2c27ada4829bc91bd80455bc67059ac06bc5 Mon Sep 17 00:00:00 2001 From: Josh Cartwright Date: Tue, 13 Nov 2012 17:26:48 -0600 Subject: clk: Add support for fundamental zynq clks Provide simplified models for the necessary clocks on the zynq-7000 platform. Currently, the PLLs, the CPU clock network, and the basic peripheral clock networks (for SDIO, SMC, SPI, QSPI, UART) are modelled. OF bindings are also provided and documented. Signed-off-by: Josh Cartwright Signed-off-by: Soren Brinkmann Acked-by: Mike Turquette Acked-by: Michal Simek --- drivers/clk/clk-zynq.c | 383 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 383 insertions(+) create mode 100644 drivers/clk/clk-zynq.c (limited to 'drivers/clk') diff --git a/drivers/clk/clk-zynq.c b/drivers/clk/clk-zynq.c new file mode 100644 index 000000000000..37a30514fd66 --- /dev/null +++ b/drivers/clk/clk-zynq.c @@ -0,0 +1,383 @@ +/* + * Copyright (c) 2012 National Instruments + * + * Josh Cartwright + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ +#include +#include +#include +#include +#include + +static void __iomem *slcr_base; + +struct zynq_pll_clk { + struct clk_hw hw; + void __iomem *pll_ctrl; + void __iomem *pll_cfg; +}; + +#define to_zynq_pll_clk(hw) container_of(hw, struct zynq_pll_clk, hw) + +#define CTRL_PLL_FDIV(x) ((x) >> 12) + +static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynq_pll_clk *pll = to_zynq_pll_clk(hw); + return parent_rate * CTRL_PLL_FDIV(ioread32(pll->pll_ctrl)); +} + +static const struct clk_ops zynq_pll_clk_ops = { + .recalc_rate = zynq_pll_recalc_rate, +}; + +static void __init zynq_pll_clk_setup(struct device_node *np) +{ + struct clk_init_data init; + struct zynq_pll_clk *pll; + const char *parent_name; + struct clk *clk; + u32 regs[2]; + int ret; + + ret = of_property_read_u32_array(np, "reg", regs, ARRAY_SIZE(regs)); + if (WARN_ON(ret)) + return; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (WARN_ON(!pll)) + return; + + pll->pll_ctrl = slcr_base + regs[0]; + pll->pll_cfg = slcr_base + regs[1]; + + of_property_read_string(np, "clock-output-names", &init.name); + + init.ops = &zynq_pll_clk_ops; + parent_name = of_clk_get_parent_name(np, 0); + init.parent_names = &parent_name; + init.num_parents = 1; + + pll->hw.init = &init; + + clk = clk_register(NULL, &pll->hw); + if (WARN_ON(IS_ERR(clk))) + return; + + ret = of_clk_add_provider(np, of_clk_src_simple_get, clk); + if (WARN_ON(ret)) + return; +} + +struct zynq_periph_clk { + struct clk_hw hw; + struct clk_onecell_data onecell_data; + struct clk *gates[2]; + void __iomem *clk_ctrl; + spinlock_t clkact_lock; +}; + +#define to_zynq_periph_clk(hw) container_of(hw, struct zynq_periph_clk, hw) + +static const u8 periph_clk_parent_map[] = { + 0, 0, 1, 2 +}; +#define PERIPH_CLK_CTRL_SRC(x) (periph_clk_parent_map[((x) & 0x30) >> 4]) +#define PERIPH_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8) + +static unsigned long zynq_periph_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynq_periph_clk *periph = to_zynq_periph_clk(hw); + return parent_rate / PERIPH_CLK_CTRL_DIV(ioread32(periph->clk_ctrl)); +} + +static u8 zynq_periph_get_parent(struct clk_hw *hw) +{ + struct zynq_periph_clk *periph = to_zynq_periph_clk(hw); + return PERIPH_CLK_CTRL_SRC(ioread32(periph->clk_ctrl)); +} + +static const struct clk_ops zynq_periph_clk_ops = { + .recalc_rate = zynq_periph_recalc_rate, + .get_parent = zynq_periph_get_parent, +}; + +static void __init zynq_periph_clk_setup(struct device_node *np) +{ + struct zynq_periph_clk *periph; + const char *parent_names[3]; + struct clk_init_data init; + int clk_num = 0, err; + const char *name; + struct clk *clk; + u32 reg; + int i; + + err = of_property_read_u32(np, "reg", ®); + if (WARN_ON(err)) + return; + + periph = kzalloc(sizeof(*periph), GFP_KERNEL); + if (WARN_ON(!periph)) + return; + + periph->clk_ctrl = slcr_base + reg; + spin_lock_init(&periph->clkact_lock); + + init.name = np->name; + init.ops = &zynq_periph_clk_ops; + for (i = 0; i < ARRAY_SIZE(parent_names); i++) + parent_names[i] = of_clk_get_parent_name(np, i); + init.parent_names = parent_names; + init.num_parents = ARRAY_SIZE(parent_names); + + periph->hw.init = &init; + + clk = clk_register(NULL, &periph->hw); + if (WARN_ON(IS_ERR(clk))) + return; + + err = of_clk_add_provider(np, of_clk_src_simple_get, clk); + if (WARN_ON(err)) + return; + + err = of_property_read_string_index(np, "clock-output-names", 0, + &name); + if (WARN_ON(err)) + return; + + periph->gates[0] = clk_register_gate(NULL, name, np->name, 0, + periph->clk_ctrl, 0, 0, + &periph->clkact_lock); + if (WARN_ON(IS_ERR(periph->gates[0]))) + return; + clk_num++; + + /* some periph clks have 2 downstream gates */ + err = of_property_read_string_index(np, "clock-output-names", 1, + &name); + if (err != -ENODATA) { + periph->gates[1] = clk_register_gate(NULL, name, np->name, 0, + periph->clk_ctrl, 1, 0, + &periph->clkact_lock); + if (WARN_ON(IS_ERR(periph->gates[1]))) + return; + clk_num++; + } + + periph->onecell_data.clks = periph->gates; + periph->onecell_data.clk_num = clk_num; + + err = of_clk_add_provider(np, of_clk_src_onecell_get, + &periph->onecell_data); + if (WARN_ON(err)) + return; +} + +/* CPU Clock domain is modelled as a mux with 4 children subclks, whose + * derivative rates depend on CLK_621_TRUE + */ + +struct zynq_cpu_clk { + struct clk_hw hw; + struct clk_onecell_data onecell_data; + struct clk *subclks[4]; + void __iomem *clk_ctrl; + spinlock_t clkact_lock; +}; + +#define to_zynq_cpu_clk(hw) container_of(hw, struct zynq_cpu_clk, hw) + +static const u8 zynq_cpu_clk_parent_map[] = { + 1, 1, 2, 0 +}; +#define CPU_CLK_SRCSEL(x) (zynq_cpu_clk_parent_map[(((x) & 0x30) >> 4)]) +#define CPU_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8) + +static u8 zynq_cpu_clk_get_parent(struct clk_hw *hw) +{ + struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw); + return CPU_CLK_SRCSEL(ioread32(cpuclk->clk_ctrl)); +} + +static unsigned long zynq_cpu_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw); + return parent_rate / CPU_CLK_CTRL_DIV(ioread32(cpuclk->clk_ctrl)); +} + +static const struct clk_ops zynq_cpu_clk_ops = { + .get_parent = zynq_cpu_clk_get_parent, + .recalc_rate = zynq_cpu_clk_recalc_rate, +}; + +struct zynq_cpu_subclk { + struct clk_hw hw; + void __iomem *clk_621; + enum { + CPU_SUBCLK_6X4X, + CPU_SUBCLK_3X2X, + CPU_SUBCLK_2X, + CPU_SUBCLK_1X, + } which; +}; + +#define CLK_621_TRUE(x) ((x) & 1) + +#define to_zynq_cpu_subclk(hw) container_of(hw, struct zynq_cpu_subclk, hw); + +static unsigned long zynq_cpu_subclk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long uninitialized_var(rate); + struct zynq_cpu_subclk *subclk; + bool is_621; + + subclk = to_zynq_cpu_subclk(hw) + is_621 = CLK_621_TRUE(ioread32(subclk->clk_621)); + + switch (subclk->which) { + case CPU_SUBCLK_6X4X: + rate = parent_rate; + break; + case CPU_SUBCLK_3X2X: + rate = parent_rate / 2; + break; + case CPU_SUBCLK_2X: + rate = parent_rate / (is_621 ? 3 : 2); + break; + case CPU_SUBCLK_1X: + rate = parent_rate / (is_621 ? 6 : 4); + break; + }; + + return rate; +} + +static const struct clk_ops zynq_cpu_subclk_ops = { + .recalc_rate = zynq_cpu_subclk_recalc_rate, +}; + +static struct clk *zynq_cpu_subclk_setup(struct device_node *np, u8 which, + void __iomem *clk_621) +{ + struct zynq_cpu_subclk *subclk; + struct clk_init_data init; + struct clk *clk; + int err; + + err = of_property_read_string_index(np, "clock-output-names", + which, &init.name); + if (WARN_ON(err)) + goto err_read_output_name; + + subclk = kzalloc(sizeof(*subclk), GFP_KERNEL); + if (!subclk) + goto err_subclk_alloc; + + subclk->clk_621 = clk_621; + subclk->which = which; + + init.ops = &zynq_cpu_subclk_ops; + init.parent_names = &np->name; + init.num_parents = 1; + + subclk->hw.init = &init; + + clk = clk_register(NULL, &subclk->hw); + if (WARN_ON(IS_ERR(clk))) + goto err_clk_register; + + return clk; + +err_clk_register: + kfree(subclk); +err_subclk_alloc: +err_read_output_name: + return ERR_PTR(-EINVAL); +} + +static void __init zynq_cpu_clk_setup(struct device_node *np) +{ + struct zynq_cpu_clk *cpuclk; + const char *parent_names[3]; + struct clk_init_data init; + void __iomem *clk_621; + struct clk *clk; + u32 reg[2]; + int err; + int i; + + err = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg)); + if (WARN_ON(err)) + return; + + cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL); + if (WARN_ON(!cpuclk)) + return; + + cpuclk->clk_ctrl = slcr_base + reg[0]; + clk_621 = slcr_base + reg[1]; + spin_lock_init(&cpuclk->clkact_lock); + + init.name = np->name; + init.ops = &zynq_cpu_clk_ops; + for (i = 0; i < ARRAY_SIZE(parent_names); i++) + parent_names[i] = of_clk_get_parent_name(np, i); + init.parent_names = parent_names; + init.num_parents = ARRAY_SIZE(parent_names); + + cpuclk->hw.init = &init; + + clk = clk_register(NULL, &cpuclk->hw); + if (WARN_ON(IS_ERR(clk))) + return; + + err = of_clk_add_provider(np, of_clk_src_simple_get, clk); + if (WARN_ON(err)) + return; + + for (i = 0; i < 4; i++) { + cpuclk->subclks[i] = zynq_cpu_subclk_setup(np, i, clk_621); + if (WARN_ON(IS_ERR(cpuclk->subclks[i]))) + return; + } + + cpuclk->onecell_data.clks = cpuclk->subclks; + cpuclk->onecell_data.clk_num = i; + + err = of_clk_add_provider(np, of_clk_src_onecell_get, + &cpuclk->onecell_data); + if (WARN_ON(err)) + return; +} + +static const __initconst struct of_device_id zynq_clk_match[] = { + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, }, + { .compatible = "xlnx,zynq-pll", .data = zynq_pll_clk_setup, }, + { .compatible = "xlnx,zynq-periph-clock", + .data = zynq_periph_clk_setup, }, + { .compatible = "xlnx,zynq-cpu-clock", .data = zynq_cpu_clk_setup, }, + {} +}; + +void __init xilinx_zynq_clocks_init(void __iomem *slcr) +{ + slcr_base = slcr; + of_clk_init(zynq_clk_match); +} -- cgit v1.2.3 From 0f586fbf6f6a9119392a5cb0f193ac11c753b09e Mon Sep 17 00:00:00 2001 From: Josh Cartwright Date: Thu, 8 Nov 2012 12:04:26 -0600 Subject: ARM: zynq: use zynq clk bindings Make the Zynq platform use the newly created zynq clk bindings. Signed-off-by: Josh Cartwright Acked-by: Michal Simek --- drivers/clk/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/clk') diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 71a25b91de00..d35a34c58369 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -19,6 +19,7 @@ endif obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o +obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o # Chip specific obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o -- cgit v1.2.3 From 41863f730ff8aad86c038aabee1292d1b04c8876 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 4 Oct 2012 09:28:29 +0200 Subject: ARM: nomadik: switch over to using the FSMC driver The Nomadik NAND driver is really just a subset of the existing FSMC driver, so let's switch over to using that driver instead, since it handles more variants of this chip. The callbacks for setting up the chip is doing stuff now handled by the FSMC driver. Signed-off-by: Linus Walleij Acked-by: Alessandro Rubini Signed-off-by: Artem Bityutskiy --- drivers/clk/clk-nomadik.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c index 517a8ff7121e..6b4c70f7d23d 100644 --- a/drivers/clk/clk-nomadik.c +++ b/drivers/clk/clk-nomadik.c @@ -20,6 +20,7 @@ void __init nomadik_clk_init(void) clk_register_clkdev(clk, NULL, "gpio.2"); clk_register_clkdev(clk, NULL, "gpio.3"); clk_register_clkdev(clk, NULL, "rng"); + clk_register_clkdev(clk, NULL, "fsmc-nand"); /* * The 2.4 MHz TIMCLK reference clock is active at boot time, this is -- cgit v1.2.3 From db5eb2daf717d5023ade51fd2a2f7bc0bfcffbde Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Wed, 24 Oct 2012 14:13:40 +0200 Subject: clk: ux500: Register mtu apb_pclocks Signed-off-by: Ulf Hansson Acked-by: Mike Turquette Signed-off-by: Linus Walleij --- drivers/clk/ux500/u8500_clk.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index ab30ce87614c..1f6bfb8f8737 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -160,12 +160,6 @@ void u8500_clk_init(void) clk = clk_reg_prcmu_gate("uiccclk", NULL, PRCMU_UICCCLK, CLK_IS_ROOT); clk_register_clkdev(clk, NULL, "uicc"); - /* - * FIXME: The MTU clocks might need some kind of "parent muxed join" - * and these have no K-clocks. For now, we ignore the missing - * connection to the corresponding P-clocks, p6_mtu0_clk and - * p6_mtu1_clk. Instead timclk is used which is the valid parent. - */ clk = clk_reg_prcmu_gate("timclk", NULL, PRCMU_TIMCLK, CLK_IS_ROOT); clk_register_clkdev(clk, NULL, "mtu0"); clk_register_clkdev(clk, NULL, "mtu1"); @@ -379,8 +373,11 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", U8500_CLKRST6_BASE, BIT(6), 0); + clk_register_clkdev(clk, "apb_pclk", "mtu0"); + clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", U8500_CLKRST6_BASE, BIT(7), 0); + clk_register_clkdev(clk, "apb_pclk", "mtu1"); /* PRCC K-clocks * -- cgit v1.2.3 From 44d6453a8793e5a39c861718f62f91e832694435 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Wed, 31 Oct 2012 14:40:52 +0100 Subject: clk: ux500: Register rng clock lookups for u8500 Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 4ec6f60e3725..87d625b08faf 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -378,6 +378,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", U8500_CLKRST6_BASE, BIT(0), 0); + clk_register_clkdev(clk, "apb_pclk", "rng"); clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", U8500_CLKRST6_BASE, BIT(1), 0); @@ -518,5 +519,5 @@ void u8500_clk_init(void) /* Periph6 */ clk = clk_reg_prcc_kclk("p3_rng_kclk", "rngclk", U8500_CLKRST6_BASE, BIT(0), CLK_SET_RATE_GATE); - + clk_register_clkdev(clk, NULL, "rng"); } -- cgit v1.2.3 From 5678596c7628e47e022d1d30fb2a6c9607f42a0e Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Wed, 31 Oct 2012 14:40:53 +0100 Subject: clk: ux500: Register nomadik keypad clock lookups for u8500 Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 87d625b08faf..64877e1588e4 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -350,6 +350,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", U8500_CLKRST3_BASE, BIT(5), 0); + clk_register_clkdev(clk, "apb_pclk", "ske"); + clk_register_clkdev(clk, "apb_pclk", "nmk-ske-keypad"); clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", U8500_CLKRST3_BASE, BIT(6), 0); @@ -507,6 +509,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k", U8500_CLKRST3_BASE, BIT(5), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ske"); + clk_register_clkdev(clk, NULL, "nmk-ske-keypad"); clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk", U8500_CLKRST3_BASE, BIT(6), CLK_SET_RATE_GATE); -- cgit v1.2.3 From ddc07ef9499509200033be7e387feb6c83744a73 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 1 Nov 2012 13:33:55 +0800 Subject: CLK: clk-twl6040: fix return value check in twl6040_clk_probe() In case of error, the function clk_register() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Mike Turquette --- drivers/clk/clk-twl6040.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-twl6040.c b/drivers/clk/clk-twl6040.c index f4a3389c3d09..bc1e713e7b9c 100644 --- a/drivers/clk/clk-twl6040.c +++ b/drivers/clk/clk-twl6040.c @@ -92,8 +92,8 @@ static int __devinit twl6040_clk_probe(struct platform_device *pdev) clkdata->mcpdm_fclk.init = &wm831x_clkout_init; clkdata->clk = clk_register(&pdev->dev, &clkdata->mcpdm_fclk); - if (!clkdata->clk) - return -EINVAL; + if (IS_ERR(clkdata->clk)) + return PTR_ERR(clkdata->clk); dev_set_drvdata(&pdev->dev, clkdata); -- cgit v1.2.3 From 90d4971d3d71a50f2265d97589ef361d1402647a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 6 Nov 2012 10:34:20 +0800 Subject: clk: spear: Add stub functions for spear3[0|1|2]0_clk_init() This fixes compile error if one of SPEAr3xx implementations is not selected. CC drivers/clk/spear/spear3xx_clock.o drivers/clk/spear/spear3xx_clock.c: In function 'spear3xx_clk_init': drivers/clk/spear/spear3xx_clock.c:599:3: error: implicit declaration of function 'spear300_clk_init' [-Werror=implicit-function-declaration] drivers/clk/spear/spear3xx_clock.c:601:3: error: implicit declaration of function 'spear310_clk_init' [-Werror=implicit-function-declaration] drivers/clk/spear/spear3xx_clock.c:603:3: error: implicit declaration of function 'spear320_clk_init' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [drivers/clk/spear/spear3xx_clock.o] Error 1 make[2]: *** [drivers/clk/spear] Error 2 make[1]: *** [drivers/clk] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin Acked-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/spear/spear3xx_clock.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index c3157454bb3f..59049cf81a74 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -157,6 +157,8 @@ static void __init spear300_clk_init(void) 1); clk_register_clkdev(clk, NULL, "a0000000.kbd"); } +#else +static inline void spear300_clk_init(void) { } #endif /* array of all spear 310 clock lookups */ @@ -197,6 +199,8 @@ static void __init spear310_clk_init(void) 1); clk_register_clkdev(clk, NULL, "b2200000.serial"); } +#else +static inline void spear310_clk_init(void) { } #endif /* array of all spear 320 clock lookups */ @@ -336,6 +340,8 @@ static void __init spear320_clk_init(void) &_lock); clk_register_clkdev(clk, NULL, "60100000.serial"); } +#else +static inline void spear320_clk_init(void) { } #endif void __init spear3xx_clk_init(void) -- cgit v1.2.3 From f58945392aad6a07ede5455ebb584aa729ac1ef0 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 22 Sep 2012 13:54:55 -0300 Subject: clk: mxs: Use a better name for the USB PHY clock Use a better name for the USB PHY clock. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Mike Turquette --- drivers/clk/mxs/clk-imx23.c | 6 +++--- drivers/clk/mxs/clk-imx28.c | 10 +++++----- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c index f00dffb9ad60..8dd476e2a9c5 100644 --- a/drivers/clk/mxs/clk-imx23.c +++ b/drivers/clk/mxs/clk-imx23.c @@ -85,7 +85,7 @@ enum imx23_clk { cpu_xtal, hbus, xbus, lcdif_div, ssp_div, gpmi_div, emi_pll, emi_xtal, etm_div, saif_div, clk32k_div, rtc, adc, spdif_div, clk32k, dri, pwm, filt, uart, ssp, gpmi, spdif, emi, saif, - lcdif, etm, usb, usb_pwr, + lcdif, etm, usb, usb_phy, clk_max }; @@ -143,8 +143,8 @@ int __init mx23_clocks_init(void) clks[saif] = mxs_clk_gate("saif", "saif_div", SAIF, 31); clks[lcdif] = mxs_clk_gate("lcdif", "lcdif_div", PIX, 31); clks[etm] = mxs_clk_gate("etm", "etm_div", ETM, 31); - clks[usb] = mxs_clk_gate("usb", "usb_pwr", DIGCTRL, 2); - clks[usb_pwr] = clk_register_gate(NULL, "usb_pwr", "pll", 0, PLLCTRL0, 18, 0, &mxs_lock); + clks[usb] = mxs_clk_gate("usb", "usb_phy", DIGCTRL, 2); + clks[usb_phy] = clk_register_gate(NULL, "usb_phy", "pll", 0, PLLCTRL0, 18, 0, &mxs_lock); for (i = 0; i < ARRAY_SIZE(clks); i++) if (IS_ERR(clks[i])) { diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c index 42978f1b4bd2..db3af0874121 100644 --- a/drivers/clk/mxs/clk-imx28.c +++ b/drivers/clk/mxs/clk-imx28.c @@ -140,7 +140,7 @@ enum imx28_clk { emi_xtal, lcdif_div, etm_div, ptp, saif0_div, saif1_div, clk32k_div, rtc, lradc, spdif_div, clk32k, pwm, uart, ssp0, ssp1, ssp2, ssp3, gpmi, spdif, emi, saif0, saif1, lcdif, etm, - fec, can0, can1, usb0, usb1, usb0_pwr, usb1_pwr, enet_out, + fec, can0, can1, usb0, usb1, usb0_phy, usb1_phy, enet_out, clk_max }; @@ -218,10 +218,10 @@ int __init mx28_clocks_init(void) clks[fec] = mxs_clk_gate("fec", "hbus", ENET, 30); clks[can0] = mxs_clk_gate("can0", "ref_xtal", FLEXCAN, 30); clks[can1] = mxs_clk_gate("can1", "ref_xtal", FLEXCAN, 28); - clks[usb0] = mxs_clk_gate("usb0", "usb0_pwr", DIGCTRL, 2); - clks[usb1] = mxs_clk_gate("usb1", "usb1_pwr", DIGCTRL, 16); - clks[usb0_pwr] = clk_register_gate(NULL, "usb0_pwr", "pll0", 0, PLL0CTRL0, 18, 0, &mxs_lock); - clks[usb1_pwr] = clk_register_gate(NULL, "usb1_pwr", "pll1", 0, PLL1CTRL0, 18, 0, &mxs_lock); + clks[usb0] = mxs_clk_gate("usb0", "usb0_phy", DIGCTRL, 2); + clks[usb1] = mxs_clk_gate("usb1", "usb1_phy", DIGCTRL, 16); + clks[usb0_phy] = clk_register_gate(NULL, "usb0_phy", "pll0", 0, PLL0CTRL0, 18, 0, &mxs_lock); + clks[usb1_phy] = clk_register_gate(NULL, "usb1_phy", "pll1", 0, PLL1CTRL0, 18, 0, &mxs_lock); clks[enet_out] = clk_register_gate(NULL, "enet_out", "pll2", 0, ENET, 18, 0, &mxs_lock); for (i = 0; i < ARRAY_SIZE(clks); i++) -- cgit v1.2.3 From 404525d5a7ecc847b5ac178dad96402f1e102ccc Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 16 Nov 2012 21:21:43 +0100 Subject: clk: sunxi: Add dummy fixed rate clock for Allwinner A1X SoCs Signed-off-by: Maxime Ripard Cc: Mike Turquette --- drivers/clk/Makefile | 1 + drivers/clk/clk-sunxi.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 31 insertions(+) create mode 100644 drivers/clk/clk-sunxi.c (limited to 'drivers/clk') diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 71a25b91de00..9c300a828ede 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -19,6 +19,7 @@ endif obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o +obj-$(CONFIG_ARCH_SUNXI) += clk-sunxi.o # Chip specific obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o diff --git a/drivers/clk/clk-sunxi.c b/drivers/clk/clk-sunxi.c new file mode 100644 index 000000000000..0e831b584ba7 --- /dev/null +++ b/drivers/clk/clk-sunxi.c @@ -0,0 +1,30 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include + +static const __initconst struct of_device_id clk_match[] = { + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, }, + {} +}; + +void __init sunxi_init_clocks(void) +{ + of_clk_init(clk_match); +} -- cgit v1.2.3 From 97fa4cf442ff2872000d9110686371775795a32b Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Sat, 17 Nov 2012 15:22:22 +0100 Subject: clk: mvebu: add mvebu core clocks. This driver allows to provide DT clocks for core clocks found on Marvell Kirkwood, Dove & 370/XP SoCs. The core clock frequencies and ratios are determined by decoding the Sample-At-Reset registers. Although technically correct, using a divider of 0 will lead to div_by_zero panic. Let's use a ratio of 0/1 instead to fail later with a zero clock. Signed-off-by: Gregory CLEMENT Signed-off-by: Sebastian Hesselbarth Signed-off-by: Andrew Lunn Tested-by Gregory CLEMENT --- drivers/clk/Kconfig | 2 + drivers/clk/Makefile | 1 + drivers/clk/mvebu/Kconfig | 3 + drivers/clk/mvebu/Makefile | 1 + drivers/clk/mvebu/clk-core.c | 675 +++++++++++++++++++++++++++++++++++++++++++ drivers/clk/mvebu/clk-core.h | 18 ++ drivers/clk/mvebu/clk.c | 23 ++ 7 files changed, 723 insertions(+) create mode 100644 drivers/clk/mvebu/Kconfig create mode 100644 drivers/clk/mvebu/Makefile create mode 100644 drivers/clk/mvebu/clk-core.c create mode 100644 drivers/clk/mvebu/clk-core.h create mode 100644 drivers/clk/mvebu/clk.c (limited to 'drivers/clk') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index bace9e98f75d..60427c0d23e6 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -54,3 +54,5 @@ config COMMON_CLK_MAX77686 This driver supports Maxim 77686 crystal oscillator clock. endmenu + +source "drivers/clk/mvebu/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 71a25b91de00..d0a14ae8d49c 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_PLAT_SPEAR) += spear/ obj-$(CONFIG_ARCH_U300) += clk-u300.o obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/ obj-$(CONFIG_ARCH_PRIMA2) += clk-prima2.o +obj-$(CONFIG_PLAT_ORION) += mvebu/ ifeq ($(CONFIG_COMMON_CLK), y) obj-$(CONFIG_ARCH_MMP) += mmp/ endif diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig new file mode 100644 index 000000000000..fd7bf97ff74d --- /dev/null +++ b/drivers/clk/mvebu/Kconfig @@ -0,0 +1,3 @@ +config MVEBU_CLK_CORE + bool + diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile new file mode 100644 index 000000000000..de1d9617f75a --- /dev/null +++ b/drivers/clk/mvebu/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_MVEBU_CLK_CORE) += clk.o clk-core.o diff --git a/drivers/clk/mvebu/clk-core.c b/drivers/clk/mvebu/clk-core.c new file mode 100644 index 000000000000..69056a7479e8 --- /dev/null +++ b/drivers/clk/mvebu/clk-core.c @@ -0,0 +1,675 @@ +/* + * Marvell EBU clock core handling defined at reset + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT + * Sebastian Hesselbarth + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include +#include +#include +#include +#include +#include +#include "clk-core.h" + +struct core_ratio { + int id; + const char *name; +}; + +struct core_clocks { + u32 (*get_tclk_freq)(void __iomem *sar); + u32 (*get_cpu_freq)(void __iomem *sar); + void (*get_clk_ratio)(void __iomem *sar, int id, int *mult, int *div); + const struct core_ratio *ratios; + int num_ratios; +}; + +static struct clk_onecell_data clk_data; + +static void __init mvebu_clk_core_setup(struct device_node *np, + struct core_clocks *coreclk) +{ + const char *tclk_name = "tclk"; + const char *cpuclk_name = "cpuclk"; + void __iomem *base; + unsigned long rate; + int n; + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + /* + * Allocate struct for TCLK, cpu clk, and core ratio clocks + */ + clk_data.clk_num = 2 + coreclk->num_ratios; + clk_data.clks = kzalloc(clk_data.clk_num * sizeof(struct clk *), + GFP_KERNEL); + if (WARN_ON(!clk_data.clks)) + return; + + /* + * Register TCLK + */ + of_property_read_string_index(np, "clock-output-names", 0, + &tclk_name); + rate = coreclk->get_tclk_freq(base); + clk_data.clks[0] = clk_register_fixed_rate(NULL, tclk_name, NULL, + CLK_IS_ROOT, rate); + WARN_ON(IS_ERR(clk_data.clks[0])); + + /* + * Register CPU clock + */ + of_property_read_string_index(np, "clock-output-names", 1, + &cpuclk_name); + rate = coreclk->get_cpu_freq(base); + clk_data.clks[1] = clk_register_fixed_rate(NULL, cpuclk_name, NULL, + CLK_IS_ROOT, rate); + WARN_ON(IS_ERR(clk_data.clks[1])); + + /* + * Register fixed-factor clocks derived from CPU clock + */ + for (n = 0; n < coreclk->num_ratios; n++) { + const char *rclk_name = coreclk->ratios[n].name; + int mult, div; + + of_property_read_string_index(np, "clock-output-names", + 2+n, &rclk_name); + coreclk->get_clk_ratio(base, coreclk->ratios[n].id, + &mult, &div); + clk_data.clks[2+n] = clk_register_fixed_factor(NULL, rclk_name, + cpuclk_name, 0, mult, div); + WARN_ON(IS_ERR(clk_data.clks[2+n])); + }; + + /* + * SAR register isn't needed anymore + */ + iounmap(base); + + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +} + +#ifdef CONFIG_MACH_ARMADA_370_XP +/* + * Armada 370/XP Sample At Reset is a 64 bit bitfiled split in two + * register of 32 bits + */ + +#define SARL 0 /* Low part [0:31] */ +#define SARL_AXP_PCLK_FREQ_OPT 21 +#define SARL_AXP_PCLK_FREQ_OPT_MASK 0x7 +#define SARL_A370_PCLK_FREQ_OPT 11 +#define SARL_A370_PCLK_FREQ_OPT_MASK 0xF +#define SARL_AXP_FAB_FREQ_OPT 24 +#define SARL_AXP_FAB_FREQ_OPT_MASK 0xF +#define SARL_A370_FAB_FREQ_OPT 15 +#define SARL_A370_FAB_FREQ_OPT_MASK 0x1F +#define SARL_A370_TCLK_FREQ_OPT 20 +#define SARL_A370_TCLK_FREQ_OPT_MASK 0x1 +#define SARH 4 /* High part [32:63] */ +#define SARH_AXP_PCLK_FREQ_OPT (52-32) +#define SARH_AXP_PCLK_FREQ_OPT_MASK 0x1 +#define SARH_AXP_PCLK_FREQ_OPT_SHIFT 3 +#define SARH_AXP_FAB_FREQ_OPT (51-32) +#define SARH_AXP_FAB_FREQ_OPT_MASK 0x1 +#define SARH_AXP_FAB_FREQ_OPT_SHIFT 4 + +static const u32 __initconst armada_370_tclk_frequencies[] = { + 16600000, + 20000000, +}; + +static u32 __init armada_370_get_tclk_freq(void __iomem *sar) +{ + u8 tclk_freq_select = 0; + + tclk_freq_select = ((readl(sar) >> SARL_A370_TCLK_FREQ_OPT) & + SARL_A370_TCLK_FREQ_OPT_MASK); + return armada_370_tclk_frequencies[tclk_freq_select]; +} + +static const u32 __initconst armada_370_cpu_frequencies[] = { + 400000000, + 533000000, + 667000000, + 800000000, + 1000000000, + 1067000000, + 1200000000, +}; + +static u32 __init armada_370_get_cpu_freq(void __iomem *sar) +{ + u32 cpu_freq; + u8 cpu_freq_select = 0; + + cpu_freq_select = ((readl(sar) >> SARL_A370_PCLK_FREQ_OPT) & + SARL_A370_PCLK_FREQ_OPT_MASK); + if (cpu_freq_select > ARRAY_SIZE(armada_370_cpu_frequencies)) { + pr_err("CPU freq select unsuported %d\n", cpu_freq_select); + cpu_freq = 0; + } else + cpu_freq = armada_370_cpu_frequencies[cpu_freq_select]; + + return cpu_freq; +} + +enum { A370_XP_NBCLK, A370_XP_HCLK, A370_XP_DRAMCLK }; + +static const struct core_ratio __initconst armada_370_xp_core_ratios[] = { + { .id = A370_XP_NBCLK, .name = "nbclk" }, + { .id = A370_XP_HCLK, .name = "hclk" }, + { .id = A370_XP_DRAMCLK, .name = "dramclk" }, +}; + +static const int __initconst armada_370_xp_nbclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 2}, {2, 2}, + {1, 2}, {1, 2}, {1, 1}, {2, 3}, + {0, 1}, {1, 2}, {2, 4}, {0, 1}, + {1, 2}, {0, 1}, {0, 1}, {2, 2}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {2, 3}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static const int __initconst armada_370_xp_hclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 6}, {2, 3}, + {1, 3}, {1, 4}, {1, 2}, {2, 6}, + {0, 1}, {1, 6}, {2, 10}, {0, 1}, + {1, 4}, {0, 1}, {0, 1}, {2, 5}, + {0, 1}, {0, 1}, {0, 1}, {1, 2}, + {2, 6}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static const int __initconst armada_370_xp_dramclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 3}, {2, 3}, + {1, 3}, {1, 2}, {1, 2}, {2, 6}, + {0, 1}, {1, 3}, {2, 5}, {0, 1}, + {1, 4}, {0, 1}, {0, 1}, {2, 5}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {2, 3}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static void __init armada_370_xp_get_clk_ratio(u32 opt, + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case A370_XP_NBCLK: + *mult = armada_370_xp_nbclk_ratios[opt][0]; + *div = armada_370_xp_nbclk_ratios[opt][1]; + break; + case A370_XP_HCLK: + *mult = armada_370_xp_hclk_ratios[opt][0]; + *div = armada_370_xp_hclk_ratios[opt][1]; + break; + case A370_XP_DRAMCLK: + *mult = armada_370_xp_dramclk_ratios[opt][0]; + *div = armada_370_xp_dramclk_ratios[opt][1]; + break; + } +} + +static void __init armada_370_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + u32 opt = ((readl(sar) >> SARL_A370_FAB_FREQ_OPT) & + SARL_A370_FAB_FREQ_OPT_MASK); + + armada_370_xp_get_clk_ratio(opt, sar, id, mult, div); +} + + +static const struct core_clocks armada_370_core_clocks = { + .get_tclk_freq = armada_370_get_tclk_freq, + .get_cpu_freq = armada_370_get_cpu_freq, + .get_clk_ratio = armada_370_get_clk_ratio, + .ratios = armada_370_xp_core_ratios, + .num_ratios = ARRAY_SIZE(armada_370_xp_core_ratios), +}; + +static const u32 __initconst armada_xp_cpu_frequencies[] = { + 1000000000, + 1066000000, + 1200000000, + 1333000000, + 1500000000, + 1666000000, + 1800000000, + 2000000000, + 667000000, + 0, + 800000000, + 1600000000, +}; + +/* For Armada XP TCLK frequency is fix: 250MHz */ +static u32 __init armada_xp_get_tclk_freq(void __iomem *sar) +{ + return 250 * 1000 * 1000; +} + +static u32 __init armada_xp_get_cpu_freq(void __iomem *sar) +{ + u32 cpu_freq; + u8 cpu_freq_select = 0; + + cpu_freq_select = ((readl(sar) >> SARL_AXP_PCLK_FREQ_OPT) & + SARL_AXP_PCLK_FREQ_OPT_MASK); + /* + * The upper bit is not contiguous to the other ones and + * located in the high part of the SAR registers + */ + cpu_freq_select |= (((readl(sar+4) >> SARH_AXP_PCLK_FREQ_OPT) & + SARH_AXP_PCLK_FREQ_OPT_MASK) + << SARH_AXP_PCLK_FREQ_OPT_SHIFT); + if (cpu_freq_select > ARRAY_SIZE(armada_xp_cpu_frequencies)) { + pr_err("CPU freq select unsuported: %d\n", cpu_freq_select); + cpu_freq = 0; + } else + cpu_freq = armada_xp_cpu_frequencies[cpu_freq_select]; + + return cpu_freq; +} + +static void __init armada_xp_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + + u32 opt = ((readl(sar) >> SARL_AXP_FAB_FREQ_OPT) & + SARL_AXP_FAB_FREQ_OPT_MASK); + /* + * The upper bit is not contiguous to the other ones and + * located in the high part of the SAR registers + */ + opt |= (((readl(sar+4) >> SARH_AXP_FAB_FREQ_OPT) & + SARH_AXP_FAB_FREQ_OPT_MASK) + << SARH_AXP_FAB_FREQ_OPT_SHIFT); + + armada_370_xp_get_clk_ratio(opt, sar, id, mult, div); +} + +static const struct core_clocks armada_xp_core_clocks = { + .get_tclk_freq = armada_xp_get_tclk_freq, + .get_cpu_freq = armada_xp_get_cpu_freq, + .get_clk_ratio = armada_xp_get_clk_ratio, + .ratios = armada_370_xp_core_ratios, + .num_ratios = ARRAY_SIZE(armada_370_xp_core_ratios), +}; + +#endif /* CONFIG_MACH_ARMADA_370_XP */ + +/* + * Dove PLL sample-at-reset configuration + * + * SAR0[8:5] : CPU frequency + * 5 = 1000 MHz + * 6 = 933 MHz + * 7 = 933 MHz + * 8 = 800 MHz + * 9 = 800 MHz + * 10 = 800 MHz + * 11 = 1067 MHz + * 12 = 667 MHz + * 13 = 533 MHz + * 14 = 400 MHz + * 15 = 333 MHz + * others reserved. + * + * SAR0[11:9] : CPU to L2 Clock divider ratio + * 0 = (1/1) * CPU + * 2 = (1/2) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * others reserved. + * + * SAR0[15:12] : CPU to DDR DRAM Clock divider ratio + * 0 = (1/1) * CPU + * 2 = (1/2) * CPU + * 3 = (2/5) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * 8 = (1/5) * CPU + * 10 = (1/6) * CPU + * 12 = (1/7) * CPU + * 14 = (1/8) * CPU + * 15 = (1/10) * CPU + * others reserved. + * + * SAR0[24:23] : TCLK frequency + * 0 = 166 MHz + * 1 = 125 MHz + * others reserved. + */ +#ifdef CONFIG_ARCH_DOVE +#define SAR_DOVE_CPU_FREQ 5 +#define SAR_DOVE_CPU_FREQ_MASK 0xf +#define SAR_DOVE_L2_RATIO 9 +#define SAR_DOVE_L2_RATIO_MASK 0x7 +#define SAR_DOVE_DDR_RATIO 12 +#define SAR_DOVE_DDR_RATIO_MASK 0xf +#define SAR_DOVE_TCLK_FREQ 23 +#define SAR_DOVE_TCLK_FREQ_MASK 0x3 + +static const u32 __initconst dove_tclk_frequencies[] = { + 166666667, + 125000000, + 0, 0 +}; + +static u32 __init dove_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_DOVE_TCLK_FREQ) & + SAR_DOVE_TCLK_FREQ_MASK; + return dove_tclk_frequencies[opt]; +} + +static const u32 __initconst dove_cpu_frequencies[] = { + 0, 0, 0, 0, 0, + 1000000000, + 933333333, 933333333, + 800000000, 800000000, 800000000, + 1066666667, + 666666667, + 533333333, + 400000000, + 333333333 +}; + +static u32 __init dove_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_DOVE_CPU_FREQ) & + SAR_DOVE_CPU_FREQ_MASK; + return dove_cpu_frequencies[opt]; +} + +enum { DOVE_CPU_TO_L2, DOVE_CPU_TO_DDR }; + +static const struct core_ratio __initconst dove_core_ratios[] = { + { .id = DOVE_CPU_TO_L2, .name = "l2clk", }, + { .id = DOVE_CPU_TO_DDR, .name = "ddrclk", } +}; + +static const int __initconst dove_cpu_l2_ratios[8][2] = { + { 1, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 } +}; + +static const int __initconst dove_cpu_ddr_ratios[16][2] = { + { 1, 1 }, { 0, 1 }, { 1, 2 }, { 2, 5 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 }, + { 1, 5 }, { 0, 1 }, { 1, 6 }, { 0, 1 }, + { 1, 7 }, { 0, 1 }, { 1, 8 }, { 1, 10 } +}; + +static void __init dove_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case DOVE_CPU_TO_L2: + { + u32 opt = (readl(sar) >> SAR_DOVE_L2_RATIO) & + SAR_DOVE_L2_RATIO_MASK; + *mult = dove_cpu_l2_ratios[opt][0]; + *div = dove_cpu_l2_ratios[opt][1]; + break; + } + case DOVE_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_DOVE_DDR_RATIO) & + SAR_DOVE_DDR_RATIO_MASK; + *mult = dove_cpu_ddr_ratios[opt][0]; + *div = dove_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const struct core_clocks dove_core_clocks = { + .get_tclk_freq = dove_get_tclk_freq, + .get_cpu_freq = dove_get_cpu_freq, + .get_clk_ratio = dove_get_clk_ratio, + .ratios = dove_core_ratios, + .num_ratios = ARRAY_SIZE(dove_core_ratios), +}; +#endif /* CONFIG_ARCH_DOVE */ + +/* + * Kirkwood PLL sample-at-reset configuration + * (6180 has different SAR layout than other Kirkwood SoCs) + * + * SAR0[4:3,22,1] : CPU frequency (6281,6292,6282) + * 4 = 600 MHz + * 6 = 800 MHz + * 7 = 1000 MHz + * 9 = 1200 MHz + * 12 = 1500 MHz + * 13 = 1600 MHz + * 14 = 1800 MHz + * 15 = 2000 MHz + * others reserved. + * + * SAR0[19,10:9] : CPU to L2 Clock divider ratio (6281,6292,6282) + * 1 = (1/2) * CPU + * 3 = (1/3) * CPU + * 5 = (1/4) * CPU + * others reserved. + * + * SAR0[8:5] : CPU to DDR DRAM Clock divider ratio (6281,6292,6282) + * 2 = (1/2) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * 7 = (2/9) * CPU + * 8 = (1/5) * CPU + * 9 = (1/6) * CPU + * others reserved. + * + * SAR0[4:2] : Kirkwood 6180 cpu/l2/ddr clock configuration (6180 only) + * 5 = [CPU = 600 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/3) * CPU] + * 6 = [CPU = 800 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/4) * CPU] + * 7 = [CPU = 1000 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/5) * CPU] + * others reserved. + * + * SAR0[21] : TCLK frequency + * 0 = 200 MHz + * 1 = 166 MHz + * others reserved. + */ +#ifdef CONFIG_ARCH_KIRKWOOD +#define SAR_KIRKWOOD_CPU_FREQ(x) \ + (((x & (1 << 1)) >> 1) | \ + ((x & (1 << 22)) >> 21) | \ + ((x & (3 << 3)) >> 1)) +#define SAR_KIRKWOOD_L2_RATIO(x) \ + (((x & (3 << 9)) >> 9) | \ + (((x & (1 << 19)) >> 17))) +#define SAR_KIRKWOOD_DDR_RATIO 5 +#define SAR_KIRKWOOD_DDR_RATIO_MASK 0xf +#define SAR_MV88F6180_CLK 2 +#define SAR_MV88F6180_CLK_MASK 0x7 +#define SAR_KIRKWOOD_TCLK_FREQ 21 +#define SAR_KIRKWOOD_TCLK_FREQ_MASK 0x1 + +enum { KIRKWOOD_CPU_TO_L2, KIRKWOOD_CPU_TO_DDR }; + +static const struct core_ratio __initconst kirkwood_core_ratios[] = { + { .id = KIRKWOOD_CPU_TO_L2, .name = "l2clk", }, + { .id = KIRKWOOD_CPU_TO_DDR, .name = "ddrclk", } +}; + +static u32 __init kirkwood_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_KIRKWOOD_TCLK_FREQ) & + SAR_KIRKWOOD_TCLK_FREQ_MASK; + return (opt) ? 166666667 : 200000000; +} + +static const u32 __initconst kirkwood_cpu_frequencies[] = { + 0, 0, 0, 0, + 600000000, + 0, + 800000000, + 1000000000, + 0, + 1200000000, + 0, 0, + 1500000000, + 1600000000, + 1800000000, + 2000000000 +}; + +static u32 __init kirkwood_get_cpu_freq(void __iomem *sar) +{ + u32 opt = SAR_KIRKWOOD_CPU_FREQ(readl(sar)); + return kirkwood_cpu_frequencies[opt]; +} + +static const int __initconst kirkwood_cpu_l2_ratios[8][2] = { + { 0, 1 }, { 1, 2 }, { 0, 1 }, { 1, 3 }, + { 0, 1 }, { 1, 4 }, { 0, 1 }, { 0, 1 } +}; + +static const int __initconst kirkwood_cpu_ddr_ratios[16][2] = { + { 0, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 2, 9 }, + { 1, 5 }, { 1, 6 }, { 0, 1 }, { 0, 1 }, + { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 } +}; + +static void __init kirkwood_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case KIRKWOOD_CPU_TO_L2: + { + u32 opt = SAR_KIRKWOOD_L2_RATIO(readl(sar)); + *mult = kirkwood_cpu_l2_ratios[opt][0]; + *div = kirkwood_cpu_l2_ratios[opt][1]; + break; + } + case KIRKWOOD_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_KIRKWOOD_DDR_RATIO) & + SAR_KIRKWOOD_DDR_RATIO_MASK; + *mult = kirkwood_cpu_ddr_ratios[opt][0]; + *div = kirkwood_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const struct core_clocks kirkwood_core_clocks = { + .get_tclk_freq = kirkwood_get_tclk_freq, + .get_cpu_freq = kirkwood_get_cpu_freq, + .get_clk_ratio = kirkwood_get_clk_ratio, + .ratios = kirkwood_core_ratios, + .num_ratios = ARRAY_SIZE(kirkwood_core_ratios), +}; + +static const u32 __initconst mv88f6180_cpu_frequencies[] = { + 0, 0, 0, 0, 0, + 600000000, + 800000000, + 1000000000 +}; + +static u32 __init mv88f6180_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & SAR_MV88F6180_CLK_MASK; + return mv88f6180_cpu_frequencies[opt]; +} + +static const int __initconst mv88f6180_cpu_ddr_ratios[8][2] = { + { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 }, + { 0, 1 }, { 1, 3 }, { 1, 4 }, { 1, 5 } +}; + +static void __init mv88f6180_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case KIRKWOOD_CPU_TO_L2: + { + /* mv88f6180 has a fixed 1:2 CPU-to-L2 ratio */ + *mult = 1; + *div = 2; + break; + } + case KIRKWOOD_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & + SAR_MV88F6180_CLK_MASK; + *mult = mv88f6180_cpu_ddr_ratios[opt][0]; + *div = mv88f6180_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const struct core_clocks mv88f6180_core_clocks = { + .get_tclk_freq = kirkwood_get_tclk_freq, + .get_cpu_freq = mv88f6180_get_cpu_freq, + .get_clk_ratio = mv88f6180_get_clk_ratio, + .ratios = kirkwood_core_ratios, + .num_ratios = ARRAY_SIZE(kirkwood_core_ratios), +}; +#endif /* CONFIG_ARCH_KIRKWOOD */ + +static const __initdata struct of_device_id clk_core_match[] = { +#ifdef CONFIG_MACH_ARMADA_370_XP + { + .compatible = "marvell,armada-370-core-clock", + .data = &armada_370_core_clocks, + }, + { + .compatible = "marvell,armada-xp-core-clock", + .data = &armada_xp_core_clocks, + }, +#endif +#ifdef CONFIG_ARCH_DOVE + { + .compatible = "marvell,dove-core-clock", + .data = &dove_core_clocks, + }, +#endif + +#ifdef CONFIG_ARCH_KIRKWOOD + { + .compatible = "marvell,kirkwood-core-clock", + .data = &kirkwood_core_clocks, + }, + { + .compatible = "marvell,mv88f6180-core-clock", + .data = &mv88f6180_core_clocks, + }, +#endif + + { } +}; + +void __init mvebu_core_clk_init(void) +{ + struct device_node *np; + + for_each_matching_node(np, clk_core_match) { + const struct of_device_id *match = + of_match_node(clk_core_match, np); + mvebu_clk_core_setup(np, (struct core_clocks *)match->data); + } +} diff --git a/drivers/clk/mvebu/clk-core.h b/drivers/clk/mvebu/clk-core.h new file mode 100644 index 000000000000..28b5e02e9885 --- /dev/null +++ b/drivers/clk/mvebu/clk-core.h @@ -0,0 +1,18 @@ +/* + * * Marvell EBU clock core handling defined at reset + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MVEBU_CLK_CORE_H +#define __MVEBU_CLK_CORE_H + +void __init mvebu_core_clk_init(void); + +#endif diff --git a/drivers/clk/mvebu/clk.c b/drivers/clk/mvebu/clk.c new file mode 100644 index 000000000000..e6742acf9880 --- /dev/null +++ b/drivers/clk/mvebu/clk.c @@ -0,0 +1,23 @@ +/* + * Marvell EBU SoC clock handling. + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include +#include +#include +#include +#include +#include "clk-core.h" + +void __init mvebu_clocks_init(void) +{ + mvebu_core_clk_init(); +} -- cgit v1.2.3 From ab8ba01b3fe5e0b81bd2da0afe66f7f6968e017b Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Sat, 17 Nov 2012 15:22:23 +0100 Subject: clk: mvebu: add armada-370-xp CPU specific clocks Add Armada 370/XP specific CPU clocks Signed-off-by: Gregory CLEMENT Signed-off-by: Thomas Petazzoni Tested-by: Gregory CLEMENT --- drivers/clk/mvebu/Kconfig | 3 + drivers/clk/mvebu/Makefile | 1 + drivers/clk/mvebu/clk-cpu.c | 186 ++++++++++++++++++++++++++++++++++++++++++++ drivers/clk/mvebu/clk-cpu.h | 22 ++++++ drivers/clk/mvebu/clk.c | 2 + 5 files changed, 214 insertions(+) create mode 100644 drivers/clk/mvebu/clk-cpu.c create mode 100644 drivers/clk/mvebu/clk-cpu.h (limited to 'drivers/clk') diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig index fd7bf97ff74d..1dd93ada9cb3 100644 --- a/drivers/clk/mvebu/Kconfig +++ b/drivers/clk/mvebu/Kconfig @@ -1,3 +1,6 @@ config MVEBU_CLK_CORE bool +config MVEBU_CLK_CPU + bool + diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile index de1d9617f75a..93da083b77e3 100644 --- a/drivers/clk/mvebu/Makefile +++ b/drivers/clk/mvebu/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_MVEBU_CLK_CORE) += clk.o clk-core.o +obj-$(CONFIG_MVEBU_CLK_CPU) += clk-cpu.o diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c new file mode 100644 index 000000000000..ff004578a119 --- /dev/null +++ b/drivers/clk/mvebu/clk-cpu.c @@ -0,0 +1,186 @@ +/* + * Marvell MVEBU CPU clock handling. + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include +#include +#include +#include +#include +#include +#include "clk-cpu.h" + +#define SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET 0x0 +#define SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET 0xC +#define SYS_CTRL_CLK_DIVIDER_MASK 0x3F + +#define MAX_CPU 4 +struct cpu_clk { + struct clk_hw hw; + int cpu; + const char *clk_name; + const char *parent_name; + void __iomem *reg_base; +}; + +static struct clk **clks; + +static struct clk_onecell_data clk_data; + +#define to_cpu_clk(p) container_of(p, struct cpu_clk, hw) + +static unsigned long clk_cpu_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct cpu_clk *cpuclk = to_cpu_clk(hwclk); + u32 reg, div; + + reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET); + div = (reg >> (cpuclk->cpu * 8)) & SYS_CTRL_CLK_DIVIDER_MASK; + return parent_rate / div; +} + +static long clk_cpu_round_rate(struct clk_hw *hwclk, unsigned long rate, + unsigned long *parent_rate) +{ + /* Valid ratio are 1:1, 1:2 and 1:3 */ + u32 div; + + div = *parent_rate / rate; + if (div == 0) + div = 1; + else if (div > 3) + div = 3; + + return *parent_rate / div; +} + +static int clk_cpu_set_rate(struct clk_hw *hwclk, unsigned long rate, + unsigned long parent_rate) +{ + struct cpu_clk *cpuclk = to_cpu_clk(hwclk); + u32 reg, div; + u32 reload_mask; + + div = parent_rate / rate; + reg = (readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET) + & (~(SYS_CTRL_CLK_DIVIDER_MASK << (cpuclk->cpu * 8)))) + | (div << (cpuclk->cpu * 8)); + writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET); + /* Set clock divider reload smooth bit mask */ + reload_mask = 1 << (20 + cpuclk->cpu); + + reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET) + | reload_mask; + writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET); + + /* Now trigger the clock update */ + reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET) + | 1 << 24; + writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET); + + /* Wait for clocks to settle down then clear reload request */ + udelay(1000); + reg &= ~(reload_mask | 1 << 24); + writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET); + udelay(1000); + + return 0; +} + +static const struct clk_ops cpu_ops = { + .recalc_rate = clk_cpu_recalc_rate, + .round_rate = clk_cpu_round_rate, + .set_rate = clk_cpu_set_rate, +}; + +void __init of_cpu_clk_setup(struct device_node *node) +{ + struct cpu_clk *cpuclk; + void __iomem *clock_complex_base = of_iomap(node, 0); + int ncpus = 0; + struct device_node *dn; + + if (clock_complex_base == NULL) { + pr_err("%s: clock-complex base register not set\n", + __func__); + return; + } + + for_each_node_by_type(dn, "cpu") + ncpus++; + + cpuclk = kzalloc(ncpus * sizeof(*cpuclk), GFP_KERNEL); + if (WARN_ON(!cpuclk)) + return; + + clks = kzalloc(ncpus * sizeof(*clks), GFP_KERNEL); + if (WARN_ON(!clks)) + return; + + for_each_node_by_type(dn, "cpu") { + struct clk_init_data init; + struct clk *clk; + struct clk *parent_clk; + char *clk_name = kzalloc(5, GFP_KERNEL); + int cpu, err; + + if (WARN_ON(!clk_name)) + return; + + err = of_property_read_u32(dn, "reg", &cpu); + if (WARN_ON(err)) + return; + + sprintf(clk_name, "cpu%d", cpu); + parent_clk = of_clk_get(node, 0); + + cpuclk[cpu].parent_name = __clk_get_name(parent_clk); + cpuclk[cpu].clk_name = clk_name; + cpuclk[cpu].cpu = cpu; + cpuclk[cpu].reg_base = clock_complex_base; + cpuclk[cpu].hw.init = &init; + + init.name = cpuclk[cpu].clk_name; + init.ops = &cpu_ops; + init.flags = 0; + init.parent_names = &cpuclk[cpu].parent_name; + init.num_parents = 1; + + clk = clk_register(NULL, &cpuclk[cpu].hw); + if (WARN_ON(IS_ERR(clk))) + goto bail_out; + clks[cpu] = clk; + } + clk_data.clk_num = MAX_CPU; + clk_data.clks = clks; + of_clk_add_provider(node, of_clk_src_onecell_get, &clk_data); + + return; +bail_out: + kfree(clks); + kfree(cpuclk); +} + +static const __initconst struct of_device_id clk_cpu_match[] = { + { + .compatible = "marvell,armada-xp-cpu-clock", + .data = of_cpu_clk_setup, + }, + { + /* sentinel */ + }, +}; + +void __init mvebu_cpu_clk_init(void) +{ + of_clk_init(clk_cpu_match); +} diff --git a/drivers/clk/mvebu/clk-cpu.h b/drivers/clk/mvebu/clk-cpu.h new file mode 100644 index 000000000000..08e2affba4e6 --- /dev/null +++ b/drivers/clk/mvebu/clk-cpu.h @@ -0,0 +1,22 @@ +/* + * Marvell MVEBU CPU clock handling. + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MVEBU_CLK_CPU_H +#define __MVEBU_CLK_CPU_H + +#ifdef CONFIG_MVEBU_CLK_CPU +void __init mvebu_cpu_clk_init(void); +#else +static inline void mvebu_cpu_clk_init(void) {} +#endif + +#endif diff --git a/drivers/clk/mvebu/clk.c b/drivers/clk/mvebu/clk.c index e6742acf9880..e3d4d7a9de6a 100644 --- a/drivers/clk/mvebu/clk.c +++ b/drivers/clk/mvebu/clk.c @@ -16,8 +16,10 @@ #include #include #include "clk-core.h" +#include "clk-cpu.h" void __init mvebu_clocks_init(void) { mvebu_core_clk_init(); + mvebu_cpu_clk_init(); } -- cgit v1.2.3 From f97d0d7aa8f8cec29a24d65afa12a777c6d2a2f1 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Sat, 17 Nov 2012 15:22:26 +0100 Subject: clk: mvebu: add clock gating control provider for DT This driver allows to provide DT clocks for clock gates found on Marvell Dove and Kirkwood SoCs. The clock gates are referenced by the phandle index of the corresponding bit in the clock gating control register to ease lookup in the datasheet. Signed-off-by: Sebastian Hesselbarth --- drivers/clk/mvebu/Kconfig | 2 + drivers/clk/mvebu/Makefile | 1 + drivers/clk/mvebu/clk-gating-ctrl.c | 177 ++++++++++++++++++++++++++++++++++++ drivers/clk/mvebu/clk-gating-ctrl.h | 22 +++++ drivers/clk/mvebu/clk.c | 2 + 5 files changed, 204 insertions(+) create mode 100644 drivers/clk/mvebu/clk-gating-ctrl.c create mode 100644 drivers/clk/mvebu/clk-gating-ctrl.h (limited to 'drivers/clk') diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig index 1dd93ada9cb3..57323fd15ec9 100644 --- a/drivers/clk/mvebu/Kconfig +++ b/drivers/clk/mvebu/Kconfig @@ -4,3 +4,5 @@ config MVEBU_CLK_CORE config MVEBU_CLK_CPU bool +config MVEBU_CLK_GATING + bool diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile index 93da083b77e3..58df3dc49363 100644 --- a/drivers/clk/mvebu/Makefile +++ b/drivers/clk/mvebu/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_MVEBU_CLK_CORE) += clk.o clk-core.o obj-$(CONFIG_MVEBU_CLK_CPU) += clk-cpu.o +obj-$(CONFIG_MVEBU_CLK_GATING) += clk-gating-ctrl.o diff --git a/drivers/clk/mvebu/clk-gating-ctrl.c b/drivers/clk/mvebu/clk-gating-ctrl.c new file mode 100644 index 000000000000..fa69f87c5797 --- /dev/null +++ b/drivers/clk/mvebu/clk-gating-ctrl.c @@ -0,0 +1,177 @@ +/* + * Marvell MVEBU clock gating control. + * + * Sebastian Hesselbarth + * Andrew Lunn + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct mvebu_gating_ctrl { + spinlock_t lock; + struct clk **gates; + int num_gates; +}; + +struct mvebu_soc_descr { + const char *name; + const char *parent; + int bit_idx; +}; + +#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) + +static struct clk __init *mvebu_clk_gating_get_src( + struct of_phandle_args *clkspec, void *data) +{ + struct mvebu_gating_ctrl *ctrl = (struct mvebu_gating_ctrl *)data; + int n; + + if (clkspec->args_count < 1) + return ERR_PTR(-EINVAL); + + for (n = 0; n < ctrl->num_gates; n++) { + struct clk_gate *gate = + to_clk_gate(__clk_get_hw(ctrl->gates[n])); + if (clkspec->args[0] == gate->bit_idx) + return ctrl->gates[n]; + } + return ERR_PTR(-ENODEV); +} + +static void __init mvebu_clk_gating_setup( + struct device_node *np, const struct mvebu_soc_descr *descr) +{ + struct mvebu_gating_ctrl *ctrl; + struct clk *clk; + void __iomem *base; + const char *default_parent = NULL; + int n; + + base = of_iomap(np, 0); + + clk = of_clk_get(np, 0); + if (!IS_ERR(clk)) { + default_parent = __clk_get_name(clk); + clk_put(clk); + } + + ctrl = kzalloc(sizeof(struct mvebu_gating_ctrl), GFP_KERNEL); + if (WARN_ON(!ctrl)) + return; + + spin_lock_init(&ctrl->lock); + + /* + * Count, allocate, and register clock gates + */ + for (n = 0; descr[n].name;) + n++; + + ctrl->num_gates = n; + ctrl->gates = kzalloc(ctrl->num_gates * sizeof(struct clk *), + GFP_KERNEL); + if (WARN_ON(!ctrl->gates)) { + kfree(ctrl); + return; + } + + for (n = 0; n < ctrl->num_gates; n++) { + const char *parent = + (descr[n].parent) ? descr[n].parent : default_parent; + ctrl->gates[n] = clk_register_gate(NULL, descr[n].name, parent, + 0, base, descr[n].bit_idx, 0, &ctrl->lock); + WARN_ON(IS_ERR(ctrl->gates[n])); + } + of_clk_add_provider(np, mvebu_clk_gating_get_src, ctrl); +} + +/* + * SoC specific clock gating control + */ + +#ifdef CONFIG_ARCH_DOVE +static const struct mvebu_soc_descr __initconst dove_gating_descr[] = { + { "usb0", NULL, 0 }, + { "usb1", NULL, 1 }, + { "ge", "gephy", 2 }, + { "sata", NULL, 3 }, + { "pex0", NULL, 4 }, + { "pex1", NULL, 5 }, + { "sdio0", NULL, 8 }, + { "sdio1", NULL, 9 }, + { "nand", NULL, 10 }, + { "camera", NULL, 11 }, + { "i2s0", NULL, 12 }, + { "i2s1", NULL, 13 }, + { "crypto", NULL, 15 }, + { "ac97", NULL, 21 }, + { "pdma", NULL, 22 }, + { "xor0", NULL, 23 }, + { "xor1", NULL, 24 }, + { "gephy", NULL, 30 }, + { } +}; +#endif + +#ifdef CONFIG_ARCH_KIRKWOOD +static const struct mvebu_soc_descr __initconst kirkwood_gating_descr[] = { + { "ge0", NULL, 0 }, + { "pex0", NULL, 2 }, + { "usb0", NULL, 3 }, + { "sdio", NULL, 4 }, + { "tsu", NULL, 5 }, + { "runit", NULL, 7 }, + { "xor0", NULL, 8 }, + { "audio", NULL, 9 }, + { "sata0", NULL, 14 }, + { "sata1", NULL, 15 }, + { "xor1", NULL, 16 }, + { "crypto", NULL, 17 }, + { "pex1", NULL, 18 }, + { "ge1", NULL, 19 }, + { "tdm", NULL, 20 }, + { } +}; +#endif + +static const __initdata struct of_device_id clk_gating_match[] = { +#ifdef CONFIG_ARCH_DOVE + { + .compatible = "marvell,dove-gating-clock", + .data = dove_gating_descr, + }, +#endif + +#ifdef CONFIG_ARCH_KIRKWOOD + { + .compatible = "marvell,kirkwood-gating-clock", + .data = kirkwood_gating_descr, + }, +#endif + + { } +}; + +void __init mvebu_gating_clk_init(void) +{ + struct device_node *np; + + for_each_matching_node(np, clk_gating_match) { + const struct of_device_id *match = + of_match_node(clk_gating_match, np); + mvebu_clk_gating_setup(np, + (const struct mvebu_soc_descr *)match->data); + } +} diff --git a/drivers/clk/mvebu/clk-gating-ctrl.h b/drivers/clk/mvebu/clk-gating-ctrl.h new file mode 100644 index 000000000000..9275d1e51f1b --- /dev/null +++ b/drivers/clk/mvebu/clk-gating-ctrl.h @@ -0,0 +1,22 @@ +/* + * Marvell EBU gating clock handling + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MVEBU_CLK_GATING_H +#define __MVEBU_CLK_GATING_H + +#ifdef CONFIG_MVEBU_CLK_GATING +void __init mvebu_gating_clk_init(void); +#else +void mvebu_gating_clk_init(void) {} +#endif + +#endif diff --git a/drivers/clk/mvebu/clk.c b/drivers/clk/mvebu/clk.c index e3d4d7a9de6a..855681b8a9dc 100644 --- a/drivers/clk/mvebu/clk.c +++ b/drivers/clk/mvebu/clk.c @@ -17,9 +17,11 @@ #include #include "clk-core.h" #include "clk-cpu.h" +#include "clk-gating-ctrl.h" void __init mvebu_clocks_init(void) { mvebu_core_clk_init(); + mvebu_gating_clk_init(); mvebu_cpu_clk_init(); } -- cgit v1.2.3 From c4c34d608482b48c1c007fecea5a7a5c65168fa2 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Sat, 17 Nov 2012 15:22:29 +0100 Subject: clk: mvebu: armada 370/XP add clock gating control provider for DT Signed-off-by: Gregory CLEMENT Signed-off-by: Andrew Lunn Signed-off-by: Thomas Petazzoni --- drivers/clk/mvebu/clk-gating-ctrl.c | 74 ++++++++++++++++++++++++++++++++++++- 1 file changed, 73 insertions(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/mvebu/clk-gating-ctrl.c b/drivers/clk/mvebu/clk-gating-ctrl.c index fa69f87c5797..c6d3c263b070 100644 --- a/drivers/clk/mvebu/clk-gating-ctrl.c +++ b/drivers/clk/mvebu/clk-gating-ctrl.c @@ -88,10 +88,21 @@ static void __init mvebu_clk_gating_setup( } for (n = 0; n < ctrl->num_gates; n++) { + u8 flags = 0; const char *parent = (descr[n].parent) ? descr[n].parent : default_parent; + + /* + * On Armada 370, the DDR clock is a special case: it + * isn't taken by any driver, but should anyway be + * kept enabled, so we mark it as IGNORE_UNUSED for + * now. + */ + if (!strcmp(descr[n].name, "ddr")) + flags |= CLK_IGNORE_UNUSED; + ctrl->gates[n] = clk_register_gate(NULL, descr[n].name, parent, - 0, base, descr[n].bit_idx, 0, &ctrl->lock); + flags, base, descr[n].bit_idx, 0, &ctrl->lock); WARN_ON(IS_ERR(ctrl->gates[n])); } of_clk_add_provider(np, mvebu_clk_gating_get_src, ctrl); @@ -101,6 +112,53 @@ static void __init mvebu_clk_gating_setup( * SoC specific clock gating control */ +#ifdef CONFIG_MACH_ARMADA_370 +static const struct mvebu_soc_descr __initconst armada_370_gating_descr[] = { + { "audio", NULL, 0 }, + { "pex0_en", NULL, 1 }, + { "pex1_en", NULL, 2 }, + { "ge1", NULL, 3 }, + { "ge0", NULL, 4 }, + { "pex0", NULL, 5 }, + { "pex1", NULL, 9 }, + { "sata0", NULL, 15 }, + { "sdio", NULL, 17 }, + { "tdm", NULL, 25 }, + { "ddr", NULL, 28 }, + { "sata1", NULL, 30 }, + { } +}; +#endif + +#ifdef CONFIG_MACH_ARMADA_XP +static const struct mvebu_soc_descr __initconst armada_xp_gating_descr[] = { + { "audio", NULL, 0 }, + { "ge3", NULL, 1 }, + { "ge2", NULL, 2 }, + { "ge1", NULL, 3 }, + { "ge0", NULL, 4 }, + { "pex0", NULL, 5 }, + { "pex1", NULL, 6 }, + { "pex2", NULL, 7 }, + { "pex3", NULL, 8 }, + { "bp", NULL, 13 }, + { "sata0lnk", NULL, 14 }, + { "sata0", "sata0lnk", 15 }, + { "lcd", NULL, 16 }, + { "sdio", NULL, 17 }, + { "usb0", NULL, 18 }, + { "usb1", NULL, 19 }, + { "usb2", NULL, 20 }, + { "xor0", NULL, 22 }, + { "crypto", NULL, 23 }, + { "tdm", NULL, 25 }, + { "xor1", NULL, 28 }, + { "sata1lnk", NULL, 29 }, + { "sata1", "sata1lnk", 30 }, + { } +}; +#endif + #ifdef CONFIG_ARCH_DOVE static const struct mvebu_soc_descr __initconst dove_gating_descr[] = { { "usb0", NULL, 0 }, @@ -147,6 +205,20 @@ static const struct mvebu_soc_descr __initconst kirkwood_gating_descr[] = { #endif static const __initdata struct of_device_id clk_gating_match[] = { +#ifdef CONFIG_MACH_ARMADA_370 + { + .compatible = "marvell,armada-370-gating-clock", + .data = armada_370_gating_descr, + }, +#endif + +#ifdef CONFIG_MACH_ARMADA_XP + { + .compatible = "marvell,armada-xp-gating-clock", + .data = armada_xp_gating_descr, + }, +#endif + #ifdef CONFIG_ARCH_DOVE { .compatible = "marvell,dove-gating-clock", -- cgit v1.2.3 From 401301ccdf516fa4b3b90216414a2a15fb826208 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 20 Nov 2012 22:39:31 +0100 Subject: clk: add GPLv2 headers to the Versatile clock files The GPLv2 headers were missing and the subsystem maintainer likes them so put them in. I am the copyright holder, so explicitly licensing these under the GPLv2. Reported-by: Mike Turquette Signed-off-by: Linus Walleij Signed-off-by: Mike Turquette --- drivers/clk/versatile/clk-icst.c | 6 ++++++ drivers/clk/versatile/clk-integrator.c | 10 +++++++++- drivers/clk/versatile/clk-realview.c | 8 ++++++++ 3 files changed, 23 insertions(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c index f555b50a5fa5..23d2d7ea1beb 100644 --- a/drivers/clk/versatile/clk-icst.c +++ b/drivers/clk/versatile/clk-icst.c @@ -3,6 +3,12 @@ * We wrap the custom interface from into the generic * clock framework. * + * Copyright (C) 2012 Linus Walleij + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * * TODO: when all ARM reference designs are migrated to generic clocks, the * ICST clock code from the ARM tree should probably be merged into this * file. diff --git a/drivers/clk/versatile/clk-integrator.c b/drivers/clk/versatile/clk-integrator.c index a5053921bf7f..3c816ae17c16 100644 --- a/drivers/clk/versatile/clk-integrator.c +++ b/drivers/clk/versatile/clk-integrator.c @@ -1,8 +1,16 @@ +/* + * Clock driver for the ARM Integrator/AP and Integrator/CP boards + * Copyright (C) 2012 Linus Walleij + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include #include #include #include #include -#include #include #include diff --git a/drivers/clk/versatile/clk-realview.c b/drivers/clk/versatile/clk-realview.c index e21a99cef378..fd2dbdbc269d 100644 --- a/drivers/clk/versatile/clk-realview.c +++ b/drivers/clk/versatile/clk-realview.c @@ -1,3 +1,11 @@ +/* + * Clock driver for the ARM RealView boards + * Copyright (C) 2012 Linus Walleij + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ #include #include #include -- cgit v1.2.3 From 7a9ad671ac0a0ec2fc86887a9416f837c0cfb801 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 20 Nov 2012 23:01:04 +0100 Subject: clk: make ICST driver handle the VCO registers It turns out that all platforms using the ICST VCO are really just touching two registers, and in the same way as well: one register with the VCO configuration as such, and one lock register that makes it possible to write to the VCO. Factor this register read/write into the ICST driver so we can reuse it in the IM-PD1 driver. Signed-off-by: Linus Walleij Signed-off-by: Mike Turquette --- drivers/clk/versatile/clk-icst.c | 60 +++++++++++++++++++++++++++++----- drivers/clk/versatile/clk-icst.h | 14 ++++++-- drivers/clk/versatile/clk-integrator.c | 45 +++---------------------- drivers/clk/versatile/clk-realview.c | 57 ++++++++------------------------ 4 files changed, 81 insertions(+), 95 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c index 23d2d7ea1beb..67ccf4aa7277 100644 --- a/drivers/clk/versatile/clk-icst.c +++ b/drivers/clk/versatile/clk-icst.c @@ -17,33 +17,74 @@ #include #include #include +#include #include "clk-icst.h" /** * struct clk_icst - ICST VCO clock wrapper * @hw: corresponding clock hardware entry + * @vcoreg: VCO register address + * @lockreg: VCO lock register address * @params: parameters for this ICST instance * @rate: current rate - * @setvco: function to commit ICST settings to hardware */ struct clk_icst { struct clk_hw hw; + void __iomem *vcoreg; + void __iomem *lockreg; const struct icst_params *params; unsigned long rate; - struct icst_vco (*getvco)(void); - void (*setvco)(struct icst_vco); }; #define to_icst(_hw) container_of(_hw, struct clk_icst, hw) +/** + * vco_get() - get ICST VCO settings from a certain register + * @vcoreg: register containing the VCO settings + */ +static struct icst_vco vco_get(void __iomem *vcoreg) +{ + u32 val; + struct icst_vco vco; + + val = readl(vcoreg); + vco.v = val & 0x1ff; + vco.r = (val >> 9) & 0x7f; + vco.s = (val >> 16) & 03; + return vco; +} + +/** + * vco_set() - commit changes to an ICST VCO + * @locreg: register to poke to unlock the VCO for writing + * @vcoreg: register containing the VCO settings + * @vco: ICST VCO parameters to commit + */ +static void vco_set(void __iomem *lockreg, + void __iomem *vcoreg, + struct icst_vco vco) +{ + u32 val; + + val = readl(vcoreg) & ~0x7ffff; + val |= vco.v | (vco.r << 9) | (vco.s << 16); + + /* This magic unlocks the VCO so it can be controlled */ + writel(0xa05f, lockreg); + writel(val, vcoreg); + /* This locks the VCO again */ + writel(0, lockreg); +} + + static unsigned long icst_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct clk_icst *icst = to_icst(hw); struct icst_vco vco; - vco = icst->getvco(); + vco = vco_get(icst->vcoreg); icst->rate = icst_hz(icst->params, vco); return icst->rate; } @@ -66,7 +107,7 @@ static int icst_set_rate(struct clk_hw *hw, unsigned long rate, vco = icst_hz_to_vco(icst->params, rate); icst->rate = icst_hz(icst->params, vco); - icst->setvco(vco); + vco_set(icst->vcoreg, icst->lockreg, vco); return 0; } @@ -76,8 +117,9 @@ static const struct clk_ops icst_ops = { .set_rate = icst_set_rate, }; -struct clk * __init icst_clk_register(struct device *dev, - const struct clk_icst_desc *desc) +struct clk *icst_clk_register(struct device *dev, + const struct clk_icst_desc *desc, + void __iomem *base) { struct clk *clk; struct clk_icst *icst; @@ -95,8 +137,8 @@ struct clk * __init icst_clk_register(struct device *dev, init.num_parents = 0; icst->hw.init = &init; icst->params = desc->params; - icst->getvco = desc->getvco; - icst->setvco = desc->setvco; + icst->vcoreg = base + desc->vco_offset; + icst->lockreg = base + desc->lock_offset; clk = clk_register(dev, &icst->hw); if (IS_ERR(clk)) diff --git a/drivers/clk/versatile/clk-icst.h b/drivers/clk/versatile/clk-icst.h index 71b4c56c1410..dad51b6ffd00 100644 --- a/drivers/clk/versatile/clk-icst.h +++ b/drivers/clk/versatile/clk-icst.h @@ -1,10 +1,18 @@ #include +/** + * struct clk_icst_desc - descriptor for the ICST VCO + * @params: ICST parameters + * @vco_offset: offset to the ICST VCO from the provided memory base + * @lock_offset: offset to the ICST VCO locking register from the provided + * memory base + */ struct clk_icst_desc { const struct icst_params *params; - struct icst_vco (*getvco)(void); - void (*setvco)(struct icst_vco); + u32 vco_offset; + u32 lock_offset; }; struct clk *icst_clk_register(struct device *dev, - const struct clk_icst_desc *desc); + const struct clk_icst_desc *desc, + void __iomem *base); diff --git a/drivers/clk/versatile/clk-integrator.c b/drivers/clk/versatile/clk-integrator.c index 3c816ae17c16..08593b4ee2c9 100644 --- a/drivers/clk/versatile/clk-integrator.c +++ b/drivers/clk/versatile/clk-integrator.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include #include #include @@ -22,42 +22,6 @@ * Inspired by portions of: * plat-versatile/clock.c and plat-versatile/include/plat/clock.h */ -#define CM_LOCK (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET) -#define CM_AUXOSC (__io_address(INTEGRATOR_HDR_BASE)+0x1c) - -/** - * cp_auxvco_get() - get ICST VCO settings for the Integrator/CP - * @vco: ICST VCO parameters to update with hardware status - */ -static struct icst_vco cp_auxvco_get(void) -{ - u32 val; - struct icst_vco vco; - - val = readl(CM_AUXOSC); - vco.v = val & 0x1ff; - vco.r = (val >> 9) & 0x7f; - vco.s = (val >> 16) & 03; - return vco; -} - -/** - * cp_auxvco_set() - commit changes to Integrator/CP ICST VCO - * @vco: ICST VCO parameters to commit - */ -static void cp_auxvco_set(struct icst_vco vco) -{ - u32 val; - - val = readl(CM_AUXOSC) & ~0x7ffff; - val |= vco.v | (vco.r << 9) | (vco.s << 16); - - /* This magic unlocks the CM VCO so it can be controlled */ - writel(0xa05f, CM_LOCK); - writel(val, CM_AUXOSC); - /* This locks the CM again */ - writel(0, CM_LOCK); -} static const struct icst_params cp_auxvco_params = { .ref = 24000000, @@ -73,8 +37,8 @@ static const struct icst_params cp_auxvco_params = { static const struct clk_icst_desc __initdata cp_icst_desc = { .params = &cp_auxvco_params, - .getvco = cp_auxvco_get, - .setvco = cp_auxvco_set, + .vco_offset = 0x1c, + .lock_offset = INTEGRATOR_HDR_LOCK_OFFSET, }; /* @@ -114,6 +78,7 @@ void __init integrator_clk_init(bool is_cp) clk_register_clkdev(clk, NULL, "sp804"); /* ICST VCO clock used on the Integrator/CP CLCD */ - clk = icst_clk_register(NULL, &cp_icst_desc); + clk = icst_clk_register(NULL, &cp_icst_desc, + __io_address(INTEGRATOR_HDR_BASE)); clk_register_clkdev(clk, NULL, "clcd"); } diff --git a/drivers/clk/versatile/clk-realview.c b/drivers/clk/versatile/clk-realview.c index fd2dbdbc269d..cda07e70a408 100644 --- a/drivers/clk/versatile/clk-realview.c +++ b/drivers/clk/versatile/clk-realview.c @@ -21,38 +21,6 @@ * Implementation of the ARM RealView clock trees. */ -static void __iomem *sys_lock; -static void __iomem *sys_vcoreg; - -/** - * realview_oscvco_get() - get ICST OSC settings for the RealView - */ -static struct icst_vco realview_oscvco_get(void) -{ - u32 val; - struct icst_vco vco; - - val = readl(sys_vcoreg); - vco.v = val & 0x1ff; - vco.r = (val >> 9) & 0x7f; - vco.s = (val >> 16) & 03; - return vco; -} - -static void realview_oscvco_set(struct icst_vco vco) -{ - u32 val; - - val = readl(sys_vcoreg) & ~0x7ffff; - val |= vco.v | (vco.r << 9) | (vco.s << 16); - - /* This magic unlocks the CM VCO so it can be controlled */ - writel(0xa05f, sys_lock); - writel(val, sys_vcoreg); - /* This locks the CM again */ - writel(0, sys_lock); -} - static const struct icst_params realview_oscvco_params = { .ref = 24000000, .vco_max = ICST307_VCO_MAX, @@ -65,10 +33,16 @@ static const struct icst_params realview_oscvco_params = { .idx2s = icst307_idx2s, }; -static const struct clk_icst_desc __initdata realview_icst_desc = { +static const struct clk_icst_desc __initdata realview_osc0_desc = { .params = &realview_oscvco_params, - .getvco = realview_oscvco_get, - .setvco = realview_oscvco_set, + .vco_offset = REALVIEW_SYS_OSC0_OFFSET, + .lock_offset = REALVIEW_SYS_LOCK_OFFSET, +}; + +static const struct clk_icst_desc __initdata realview_osc4_desc = { + .params = &realview_oscvco_params, + .vco_offset = REALVIEW_SYS_OSC4_OFFSET, + .lock_offset = REALVIEW_SYS_LOCK_OFFSET, }; /* @@ -78,13 +52,6 @@ void __init realview_clk_init(void __iomem *sysbase, bool is_pb1176) { struct clk *clk; - sys_lock = sysbase + REALVIEW_SYS_LOCK_OFFSET; - if (is_pb1176) - sys_vcoreg = sysbase + REALVIEW_SYS_OSC0_OFFSET; - else - sys_vcoreg = sysbase + REALVIEW_SYS_OSC4_OFFSET; - - /* APB clock dummy */ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); clk_register_clkdev(clk, "apb_pclk", NULL); @@ -116,7 +83,11 @@ void __init realview_clk_init(void __iomem *sysbase, bool is_pb1176) clk_register_clkdev(clk, NULL, "sp804"); /* ICST VCO clock */ - clk = icst_clk_register(NULL, &realview_icst_desc); + if (is_pb1176) + clk = icst_clk_register(NULL, &realview_osc0_desc, sysbase); + else + clk = icst_clk_register(NULL, &realview_osc4_desc, sysbase); + clk_register_clkdev(clk, NULL, "dev:clcd"); clk_register_clkdev(clk, NULL, "issp:clcd"); } -- cgit v1.2.3 From 70ee65771424829fd092a1df9afcc7e24c94004b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 20 Nov 2012 22:39:49 +0100 Subject: clk: move IM-PD1 clocks to drivers/clk The ARM IM-PD1 add-on module has a few clock of its own, let's move also these down to the drivers/clk/versatile driver dir and get rid of any remaining oldschool Integrator clocks. Signed-off-by: Linus Walleij Signed-off-by: Mike Turquette --- drivers/clk/versatile/Makefile | 1 + drivers/clk/versatile/clk-impd1.c | 97 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 98 insertions(+) create mode 100644 drivers/clk/versatile/clk-impd1.c (limited to 'drivers/clk') diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile index c776053e5bb4..ec3b88fe3e6d 100644 --- a/drivers/clk/versatile/Makefile +++ b/drivers/clk/versatile/Makefile @@ -1,6 +1,7 @@ # Makefile for Versatile-specific clocks obj-$(CONFIG_ICST) += clk-icst.o obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o +obj-$(CONFIG_INTEGRATOR_IMPD1) += clk-impd1.o obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o obj-$(CONFIG_ARCH_VEXPRESS) += clk-vexpress.o obj-$(CONFIG_VEXPRESS_CONFIG) += clk-vexpress-osc.o diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c new file mode 100644 index 000000000000..369139af2a3b --- /dev/null +++ b/drivers/clk/versatile/clk-impd1.c @@ -0,0 +1,97 @@ +/* + * Clock driver for the ARM Integrator/IM-PD1 board + * Copyright (C) 2012 Linus Walleij + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include + +#include + +#include "clk-icst.h" + +struct impd1_clk { + struct clk *vcoclk; + struct clk *uartclk; + struct clk_lookup *clks[3]; +}; + +static struct impd1_clk impd1_clks[4]; + +/* + * There are two VCO's on the IM-PD1 but only one is used by the + * kernel, that is why we are only implementing the control of + * IMPD1_OSC1 here. + */ + +static const struct icst_params impd1_vco_params = { + .ref = 24000000, /* 24 MHz */ + .vco_max = ICST525_VCO_MAX_3V, + .vco_min = ICST525_VCO_MIN, + .vd_min = 12, + .vd_max = 519, + .rd_min = 3, + .rd_max = 120, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, +}; + +static const struct clk_icst_desc impd1_icst1_desc = { + .params = &impd1_vco_params, + .vco_offset = IMPD1_OSC1, + .lock_offset = IMPD1_LOCK, +}; + +/** + * integrator_impd1_clk_init() - set up the integrator clock tree + * @base: base address of the logic module (LM) + * @id: the ID of this LM + */ +void integrator_impd1_clk_init(void __iomem *base, unsigned int id) +{ + struct impd1_clk *imc; + struct clk *clk; + int i; + + if (id > 3) { + pr_crit("no more than 4 LMs can be attached\n"); + return; + } + imc = &impd1_clks[id]; + + clk = icst_clk_register(NULL, &impd1_icst1_desc, base); + imc->vcoclk = clk; + imc->clks[0] = clkdev_alloc(clk, NULL, "lm%x:01000", id); + + /* UART reference clock */ + clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT, + 14745600); + imc->uartclk = clk; + imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:00100", id); + imc->clks[2] = clkdev_alloc(clk, NULL, "lm%x:00200", id); + + for (i = 0; i < ARRAY_SIZE(imc->clks); i++) + clkdev_add(imc->clks[i]); +} + +void integrator_impd1_clk_exit(unsigned int id) +{ + int i; + struct impd1_clk *imc; + + if (id > 3) + return; + imc = &impd1_clks[id]; + + for (i = 0; i < ARRAY_SIZE(imc->clks); i++) + clkdev_drop(imc->clks[i]); + clk_unregister(imc->uartclk); + clk_unregister(imc->vcoclk); +} -- cgit v1.2.3 From df2449aba4749fb8d04c3c1bbfad5cf8863c323b Mon Sep 17 00:00:00 2001 From: Rajeev Kumar Date: Sat, 10 Nov 2012 12:13:40 +0530 Subject: CLK: SPEAr: Fix dev_id & con_id for multiple clocks dev_id & con_id names of multiple clocks are incorrect. This patch fixes these names with the names that come via DT. Signed-off-by: Rajeev Kumar Signed-off-by: Shiraz Hashim Signed-off-by: Bhavna Yadav Signed-off-by: Vipul Kumar Samar Signed-off-by: Deepak Sikri Signed-off-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/spear/spear1310_clock.c | 30 +++++++++++++------------- drivers/clk/spear/spear1340_clock.c | 42 +++++++++++++++++++------------------ drivers/clk/spear/spear3xx_clock.c | 12 ++++++----- drivers/clk/spear/spear6xx_clock.c | 6 ++++-- 4 files changed, 49 insertions(+), 41 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c index 0fcec2aae19c..f13b1d23b4a9 100644 --- a/drivers/clk/spear/spear1310_clock.c +++ b/drivers/clk/spear/spear1310_clock.c @@ -401,7 +401,7 @@ void __init spear1310_clk_init(void) clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_RTC_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "fc900000.rtc"); + clk_register_clkdev(clk, NULL, "e0580000.rtc"); /* clock derived from 24 or 25 MHz osc clk */ /* vco-pll */ @@ -615,7 +615,7 @@ void __init spear1310_clk_init(void) ARRAY_SIZE(gmac_phy_parents), 0, SPEAR1310_PERIP_CLK_CFG, SPEAR1310_GMAC_PHY_CLK_SHIFT, SPEAR1310_GMAC_PHY_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, NULL, "stmmacphy.0"); + clk_register_clkdev(clk, "stmmacphy.0", NULL); /* clcd */ clk = clk_register_mux(NULL, "clcd_syn_mclk", clcd_synth_parents, @@ -638,7 +638,7 @@ void __init spear1310_clk_init(void) clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mclk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CLCD_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "clcd_clk", NULL); + clk_register_clkdev(clk, NULL, "e1000000.clcd"); /* i2s */ clk = clk_register_mux(NULL, "i2s_src_mclk", i2s_src_parents, @@ -705,35 +705,37 @@ void __init spear1310_clk_init(void) clk = clk_register_gate(NULL, "usbh0_clk", "ahb_clk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UHC0_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "usbh.0_clk", NULL); + clk_register_clkdev(clk, NULL, "e4000000.ohci"); + clk_register_clkdev(clk, NULL, "e4800000.ehci"); clk = clk_register_gate(NULL, "usbh1_clk", "ahb_clk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UHC1_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "usbh.1_clk", NULL); + clk_register_clkdev(clk, NULL, "e5000000.ohci"); + clk_register_clkdev(clk, NULL, "e5800000.ehci"); clk = clk_register_gate(NULL, "uoc_clk", "ahb_clk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UOC_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "uoc"); + clk_register_clkdev(clk, NULL, "e3800000.otg"); clk = clk_register_gate(NULL, "pcie_sata_0_clk", "ahb_clk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_0_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "dw_pcie.0"); - clk_register_clkdev(clk, NULL, "ahci.0"); + clk_register_clkdev(clk, NULL, "b1000000.ahci"); clk = clk_register_gate(NULL, "pcie_sata_1_clk", "ahb_clk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "dw_pcie.1"); - clk_register_clkdev(clk, NULL, "ahci.1"); + clk_register_clkdev(clk, NULL, "b1800000.ahci"); clk = clk_register_gate(NULL, "pcie_sata_2_clk", "ahb_clk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_2_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "dw_pcie.2"); - clk_register_clkdev(clk, NULL, "ahci.2"); + clk_register_clkdev(clk, NULL, "b4000000.ahci"); clk = clk_register_gate(NULL, "sysram0_clk", "ahb_clk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SYSRAM0_CLK_ENB, 0, @@ -754,7 +756,7 @@ void __init spear1310_clk_init(void) clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_ADC_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "adc_clk"); + clk_register_clkdev(clk, NULL, "e0080000.adc"); /* clock derived from apb clk */ clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, @@ -916,15 +918,15 @@ void __init spear1310_clk_init(void) SPEAR1310_RAS_CTRL_REG1, SPEAR1310_SMII_RGMII_PHY_CLK_SHIFT, SPEAR1310_PHY_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, NULL, "stmmacphy.1"); - clk_register_clkdev(clk, NULL, "stmmacphy.2"); - clk_register_clkdev(clk, NULL, "stmmacphy.4"); + clk_register_clkdev(clk, "stmmacphy.1", NULL); + clk_register_clkdev(clk, "stmmacphy.2", NULL); + clk_register_clkdev(clk, "stmmacphy.4", NULL); clk = clk_register_mux(NULL, "rmii_phy_mclk", rmii_phy_parents, ARRAY_SIZE(rmii_phy_parents), 0, SPEAR1310_RAS_CTRL_REG1, SPEAR1310_RMII_PHY_CLK_SHIFT, SPEAR1310_PHY_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, NULL, "stmmacphy.3"); + clk_register_clkdev(clk, "stmmacphy.3", NULL); clk = clk_register_mux(NULL, "uart1_mclk", uart_parents, ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0, diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c index 2352cee7f645..dae2ba60a8f9 100644 --- a/drivers/clk/spear/spear1340_clock.c +++ b/drivers/clk/spear/spear1340_clock.c @@ -425,7 +425,7 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_RTC_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "fc900000.rtc"); + clk_register_clkdev(clk, NULL, "e0580000.rtc"); /* clock derived from 24 or 25 MHz osc clk */ /* vco-pll */ @@ -499,7 +499,7 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "thermal_gclk", "thermal_clk", 0, SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_THSENS_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "spear_thermal"); + clk_register_clkdev(clk, NULL, "e07008c4.thermal"); /* clock derived from pll4 clk */ clk = clk_register_fixed_factor(NULL, "ddr_clk", "pll4_clk", 0, 1, @@ -659,7 +659,7 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_C3_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "c3"); + clk_register_clkdev(clk, NULL, "e1800000.c3"); /* gmac */ clk = clk_register_mux(NULL, "phy_input_mclk", gmac_phy_input_parents, @@ -679,7 +679,7 @@ void __init spear1340_clk_init(void) ARRAY_SIZE(gmac_phy_parents), 0, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_GMAC_PHY_CLK_SHIFT, SPEAR1340_GMAC_PHY_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, NULL, "stmmacphy.0"); + clk_register_clkdev(clk, "stmmacphy.0", NULL); /* clcd */ clk = clk_register_mux(NULL, "clcd_syn_mclk", clcd_synth_parents, @@ -702,7 +702,7 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mclk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CLCD_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "clcd_clk", NULL); + clk_register_clkdev(clk, NULL, "e1000000.clcd"); /* i2s */ clk = clk_register_mux(NULL, "i2s_src_mclk", i2s_src_parents, @@ -769,23 +769,25 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "usbh0_clk", "ahb_clk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UHC0_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "usbh.0_clk", NULL); + clk_register_clkdev(clk, NULL, "e4000000.ohci"); + clk_register_clkdev(clk, NULL, "e4800000.ehci"); clk = clk_register_gate(NULL, "usbh1_clk", "ahb_clk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UHC1_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "usbh.1_clk", NULL); + clk_register_clkdev(clk, NULL, "e5000000.ohci"); + clk_register_clkdev(clk, NULL, "e5800000.ehci"); clk = clk_register_gate(NULL, "uoc_clk", "ahb_clk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UOC_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "uoc"); + clk_register_clkdev(clk, NULL, "e3800000.otg"); clk = clk_register_gate(NULL, "pcie_sata_clk", "ahb_clk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_PCIE_SATA_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "dw_pcie"); - clk_register_clkdev(clk, NULL, "ahci"); + clk_register_clkdev(clk, NULL, "b1000000.ahci"); clk = clk_register_gate(NULL, "sysram0_clk", "ahb_clk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SYSRAM0_CLK_ENB, 0, @@ -806,7 +808,7 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_ADC_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "adc_clk"); + clk_register_clkdev(clk, NULL, "e0080000.adc"); /* clock derived from apb clk */ clk = clk_register_gate(NULL, "ssp_clk", "apb_clk", 0, @@ -827,12 +829,12 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "i2s_play_clk", "apb_clk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2S_PLAY_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "b2400000.i2s"); + clk_register_clkdev(clk, NULL, "b2400000.i2s-play"); clk = clk_register_gate(NULL, "i2s_rec_clk", "apb_clk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2S_REC_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "b2000000.i2s"); + clk_register_clkdev(clk, NULL, "b2000000.i2s-rec"); clk = clk_register_gate(NULL, "kbd_clk", "apb_clk", 0, SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_KBD_CLK_ENB, 0, @@ -896,7 +898,7 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_OUT_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "spdif-out"); + clk_register_clkdev(clk, NULL, "d0000000.spdif-out"); clk = clk_register_mux(NULL, "spdif_in_mclk", spdif_in_parents, ARRAY_SIZE(spdif_in_parents), 0, @@ -907,7 +909,7 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_IN_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "spdif-in"); + clk_register_clkdev(clk, NULL, "d0100000.spdif-in"); clk = clk_register_gate(NULL, "acp_clk", "acp_mclk", 0, SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0, @@ -917,7 +919,7 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "plgpio"); + clk_register_clkdev(clk, NULL, "e2800000.gpio"); clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB, @@ -937,25 +939,25 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "cam0_clk", "cam0_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "spear_camif.0"); + clk_register_clkdev(clk, NULL, "d0200000.cam0"); clk = clk_register_gate(NULL, "cam1_clk", "cam1_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "spear_camif.1"); + clk_register_clkdev(clk, NULL, "d0300000.cam1"); clk = clk_register_gate(NULL, "cam2_clk", "cam2_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "spear_camif.2"); + clk_register_clkdev(clk, NULL, "d0400000.cam2"); clk = clk_register_gate(NULL, "cam3_clk", "cam3_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "spear_camif.3"); + clk_register_clkdev(clk, NULL, "d0500000.cam3"); clk = clk_register_gate(NULL, "pwm_clk", "pwm_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PWM_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "pwm"); + clk_register_clkdev(clk, NULL, "e0180000.pwm"); } diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index 59049cf81a74..417f93734612 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -255,7 +255,7 @@ static void __init spear320_clk_init(void) clk = clk_register_fixed_factor(NULL, "pwm_clk", "ras_ahb_clk", 0, 1, 1); - clk_register_clkdev(clk, "pwm", NULL); + clk_register_clkdev(clk, NULL, "a8000000.pwm"); clk = clk_register_fixed_factor(NULL, "ssp1_clk", "ras_ahb_clk", 0, 1, 1); @@ -275,7 +275,7 @@ static void __init spear320_clk_init(void) clk = clk_register_fixed_factor(NULL, "i2s_clk", "ras_apb_clk", 0, 1, 1); - clk_register_clkdev(clk, NULL, "i2s"); + clk_register_clkdev(clk, NULL, "a9400000.i2s"); clk = clk_register_mux(NULL, "i2s_ref_clk", i2s_ref_parents, ARRAY_SIZE(i2s_ref_parents), 0, SPEAR320_CONTROL_REG, @@ -486,7 +486,9 @@ void __init spear3xx_clk_init(void) /* clock derived from pll3 clk */ clk = clk_register_gate(NULL, "usbh_clk", "pll3_clk", 0, PERIP1_CLK_ENB, USBH_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "usbh_clk", NULL); + clk_register_clkdev(clk, NULL, "e1800000.ehci"); + clk_register_clkdev(clk, NULL, "e1900000.ohci"); + clk_register_clkdev(clk, NULL, "e2100000.ohci"); clk = clk_register_fixed_factor(NULL, "usbh.0_clk", "usbh_clk", 0, 1, 1); @@ -498,7 +500,7 @@ void __init spear3xx_clk_init(void) clk = clk_register_gate(NULL, "usbd_clk", "pll3_clk", 0, PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "designware_udc"); + clk_register_clkdev(clk, NULL, "e1100000.usbd"); /* clock derived from ahb clk */ clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2, @@ -546,7 +548,7 @@ void __init spear3xx_clk_init(void) /* clock derived from apb clk */ clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB, ADC_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "adc"); + clk_register_clkdev(clk, NULL, "d0080000.adc"); clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0, PERIP1_CLK_ENB, GPIO_CLK_ENB, 0, &_lock); diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c index a98d0866f541..c7fa67c7c0ab 100644 --- a/drivers/clk/spear/spear6xx_clock.c +++ b/drivers/clk/spear/spear6xx_clock.c @@ -261,11 +261,13 @@ void __init spear6xx_clk_init(void) /* clock derived from pll3 clk */ clk = clk_register_gate(NULL, "usbh0_clk", "pll3_clk", 0, PERIP1_CLK_ENB, USBH0_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "usbh.0_clk"); + clk_register_clkdev(clk, NULL, "e1800000.ehci"); + clk_register_clkdev(clk, NULL, "e1900000.ohci"); clk = clk_register_gate(NULL, "usbh1_clk", "pll3_clk", 0, PERIP1_CLK_ENB, USBH1_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "usbh.1_clk"); + clk_register_clkdev(clk, NULL, "e2000000.ehci"); + clk_register_clkdev(clk, NULL, "e2100000.ohci"); clk = clk_register_gate(NULL, "usbd_clk", "pll3_clk", 0, PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock); -- cgit v1.2.3 From e0b9c2109b4686c343514823469013150d28b4c0 Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Sat, 10 Nov 2012 12:13:41 +0530 Subject: CLK: SPEAr13xx: Fix mux clock names This patch updates mux clock names of multiple clocks. It updates _clk with _mclk to make it more readable. Signed-off-by: Shiraz Hashim Signed-off-by: Rajeev Kumar Signed-off-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/spear/spear1310_clock.c | 4 ++-- drivers/clk/spear/spear1340_clock.c | 20 ++++++++++---------- 2 files changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c index f13b1d23b4a9..2f1cb7165bc7 100644 --- a/drivers/clk/spear/spear1310_clock.c +++ b/drivers/clk/spear/spear1310_clock.c @@ -633,7 +633,7 @@ void __init spear1310_clk_init(void) ARRAY_SIZE(clcd_pixel_parents), 0, SPEAR1310_PERIP_CLK_CFG, SPEAR1310_CLCD_CLK_SHIFT, SPEAR1310_CLCD_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "clcd_pixel_clk", NULL); + clk_register_clkdev(clk, "clcd_pixel_mclk", NULL); clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mclk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CLCD_CLK_ENB, 0, @@ -645,7 +645,7 @@ void __init spear1310_clk_init(void) ARRAY_SIZE(i2s_src_parents), 0, SPEAR1310_I2S_CLK_CFG, SPEAR1310_I2S_SRC_CLK_SHIFT, SPEAR1310_I2S_SRC_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "i2s_src_clk", NULL); + clk_register_clkdev(clk, "i2s_src_mclk", NULL); clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", 0, SPEAR1310_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl, diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c index dae2ba60a8f9..4733d996599e 100644 --- a/drivers/clk/spear/spear1340_clock.c +++ b/drivers/clk/spear/spear1340_clock.c @@ -521,7 +521,7 @@ void __init spear1340_clk_init(void) ARRAY_SIZE(sys_parents), 0, SPEAR1340_SYS_CLK_CTRL, SPEAR1340_SCLK_SRC_SEL_SHIFT, SPEAR1340_SCLK_SRC_SEL_MASK, 0, &_lock); - clk_register_clkdev(clk, "sys_clk", NULL); + clk_register_clkdev(clk, "sys_mclk", NULL); clk = clk_register_fixed_factor(NULL, "cpu_clk", "sys_mclk", 0, 1, 2); @@ -697,7 +697,7 @@ void __init spear1340_clk_init(void) ARRAY_SIZE(clcd_pixel_parents), 0, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_CLCD_CLK_SHIFT, SPEAR1340_CLCD_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "clcd_pixel_clk", NULL); + clk_register_clkdev(clk, "clcd_pixel_mclk", NULL); clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mclk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CLCD_CLK_ENB, 0, @@ -709,7 +709,7 @@ void __init spear1340_clk_init(void) ARRAY_SIZE(i2s_src_parents), 0, SPEAR1340_I2S_CLK_CFG, SPEAR1340_I2S_SRC_CLK_SHIFT, SPEAR1340_I2S_SRC_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "i2s_src_clk", NULL); + clk_register_clkdev(clk, "i2s_src_mclk", NULL); clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", 0, SPEAR1340_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl, @@ -720,7 +720,7 @@ void __init spear1340_clk_init(void) ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1340_I2S_CLK_CFG, SPEAR1340_I2S_REF_SHIFT, SPEAR1340_I2S_REF_SEL_MASK, 0, &_lock); - clk_register_clkdev(clk, "i2s_ref_clk", NULL); + clk_register_clkdev(clk, "i2s_ref_mclk", NULL); clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mclk", 0, SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_I2S_REF_PAD_CLK_ENB, @@ -846,30 +846,30 @@ void __init spear1340_clk_init(void) ARRAY_SIZE(gen_synth0_1_parents), 0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT0_1_CLK_SHIFT, SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gen_syn0_1_clk", NULL); + clk_register_clkdev(clk, "gen_syn0_1_mclk", NULL); clk = clk_register_mux(NULL, "gen_syn2_3_mclk", gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents), 0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT2_3_CLK_SHIFT, SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gen_syn2_3_clk", NULL); + clk_register_clkdev(clk, "gen_syn2_3_mclk", NULL); - clk = clk_register_frac("gen_syn0_clk", "gen_syn0_1_clk", 0, + clk = clk_register_frac("gen_syn0_clk", "gen_syn0_1_mclk", 0, SPEAR1340_GEN_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl), &_lock); clk_register_clkdev(clk, "gen_syn0_clk", NULL); - clk = clk_register_frac("gen_syn1_clk", "gen_syn0_1_clk", 0, + clk = clk_register_frac("gen_syn1_clk", "gen_syn0_1_mclk", 0, SPEAR1340_GEN_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl), &_lock); clk_register_clkdev(clk, "gen_syn1_clk", NULL); - clk = clk_register_frac("gen_syn2_clk", "gen_syn2_3_clk", 0, + clk = clk_register_frac("gen_syn2_clk", "gen_syn2_3_mclk", 0, SPEAR1340_GEN_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl), &_lock); clk_register_clkdev(clk, "gen_syn2_clk", NULL); - clk = clk_register_frac("gen_syn3_clk", "gen_syn2_3_clk", 0, + clk = clk_register_frac("gen_syn3_clk", "gen_syn2_3_mclk", 0, SPEAR1340_GEN_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl), &_lock); clk_register_clkdev(clk, "gen_syn3_clk", NULL); -- cgit v1.2.3 From 463f9e209ca69d52344479544d1e52c02f2e6918 Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Sat, 10 Nov 2012 12:13:42 +0530 Subject: CLK: SPEAr13xx: fix parent names of multiple clocks This patch fixes parent names of multiple clocks. Signed-off-by: Shiraz Hashim Signed-off-by: Vipul Kumar Samar Signed-off-by: Rajeev Kumar Signed-off-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/spear/spear1310_clock.c | 2 +- drivers/clk/spear/spear1340_clock.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c index 2f1cb7165bc7..e84b1fbb5838 100644 --- a/drivers/clk/spear/spear1310_clock.c +++ b/drivers/clk/spear/spear1310_clock.c @@ -664,7 +664,7 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL); clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gclk", - "i2s_ref_pad_clk", 0, SPEAR1310_I2S_CLK_CFG, + "i2s_ref_mclk", 0, SPEAR1310_I2S_CLK_CFG, &i2s_sclk_masks, i2s_sclk_rtbl, ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1); clk_register_clkdev(clk, "i2s_sclk_clk", NULL); diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c index 4733d996599e..020431ac163d 100644 --- a/drivers/clk/spear/spear1340_clock.c +++ b/drivers/clk/spear/spear1340_clock.c @@ -370,7 +370,7 @@ static struct frac_rate_tbl gen_rtbl[] = { /* clock parents */ static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", }; static const char *sys_parents[] = { "pll1_clk", "pll1_clk", "pll1_clk", - "pll1_clk", "sys_synth_clk", "sys_synth_clk", "pll2_clk", "pll3_clk", }; + "pll1_clk", "sys_syn_clk", "sys_syn_clk", "pll2_clk", "pll3_clk", }; static const char *ahb_parents[] = { "cpu_div3_clk", "amba_syn_clk", }; static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", }; static const char *uart0_parents[] = { "pll5_clk", "osc_24m_clk", @@ -391,7 +391,7 @@ static const char *spdif_in_parents[] = { "pll2_clk", "gen_syn3_clk", }; static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk", "pll3_clk", }; -static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco3div2_clk", +static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco2div2_clk", "pll2_clk", }; void __init spear1340_clk_init(void) @@ -956,7 +956,7 @@ void __init spear1340_clk_init(void) &_lock); clk_register_clkdev(clk, NULL, "d0500000.cam3"); - clk = clk_register_gate(NULL, "pwm_clk", "pwm_mclk", 0, + clk = clk_register_gate(NULL, "pwm_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PWM_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "e0180000.pwm"); -- cgit v1.2.3 From 1249979242db10d2fe1793f26e7658d94b7bf6dc Mon Sep 17 00:00:00 2001 From: Vipul Kumar Samar Date: Sat, 10 Nov 2012 12:13:43 +0530 Subject: CLK: SPEAr: Set CLK_SET_RATE_PARENT for few clocks Flag CLK_SET_RATE_PARENT is required for a clock, where we want to propagate clk_set_rate to its parent. This patch adds this to multiple clocks. Signed-off-by: Vipul Kumar Samar Signed-off-by: Shiraz Hashim Signed-off-by: Rajeev Kumar Signed-off-by: Vijay Kumar Mishra Signed-off-by: Vijay Kumar Mishra Signed-off-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/spear/clk-aux-synth.c | 3 +- drivers/clk/spear/spear1310_clock.c | 49 +++++++-------- drivers/clk/spear/spear1340_clock.c | 73 +++++++++++----------- drivers/clk/spear/spear3xx_clock.c | 119 ++++++++++++++++++++---------------- drivers/clk/spear/spear6xx_clock.c | 3 +- 5 files changed, 133 insertions(+), 114 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/spear/clk-aux-synth.c b/drivers/clk/spear/clk-aux-synth.c index 6756e7c3bc07..bdfb4421c643 100644 --- a/drivers/clk/spear/clk-aux-synth.c +++ b/drivers/clk/spear/clk-aux-synth.c @@ -179,7 +179,8 @@ struct clk *clk_register_aux(const char *aux_name, const char *gate_name, if (gate_name) { struct clk *tgate_clk; - tgate_clk = clk_register_gate(NULL, gate_name, aux_name, 0, reg, + tgate_clk = clk_register_gate(NULL, gate_name, aux_name, + CLK_SET_RATE_PARENT, reg, aux->masks->enable_bit, 0, lock); if (IS_ERR_OR_NULL(tgate_clk)) goto free_aux; diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c index e84b1fbb5838..2809b670e22c 100644 --- a/drivers/clk/spear/spear1310_clock.c +++ b/drivers/clk/spear/spear1310_clock.c @@ -483,7 +483,8 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, "ddr_clk", NULL); /* clock derived from pll1 clk */ - clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 2); + clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", + CLK_SET_RATE_PARENT, 1, 2); clk_register_clkdev(clk, "cpu_clk", NULL); clk = clk_register_fixed_factor(NULL, "wdt_clk", "cpu_clk", 0, 1, @@ -547,14 +548,14 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk1, "uart_syn_gclk", NULL); clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents, - ARRAY_SIZE(uart0_parents), 0, SPEAR1310_PERIP_CLK_CFG, - SPEAR1310_UART_CLK_SHIFT, SPEAR1310_UART_CLK_MASK, 0, - &_lock); + ARRAY_SIZE(uart0_parents), CLK_SET_RATE_PARENT, + SPEAR1310_PERIP_CLK_CFG, SPEAR1310_UART_CLK_SHIFT, + SPEAR1310_UART_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "uart0_mclk", NULL); - clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", 0, - SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UART_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", + CLK_SET_RATE_PARENT, SPEAR1310_PERIP1_CLK_ENB, + SPEAR1310_UART_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "e0000000.serial"); clk = clk_register_aux("sdhci_syn_clk", "sdhci_syn_gclk", @@ -563,9 +564,9 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, "sdhci_syn_clk", NULL); clk_register_clkdev(clk1, "sdhci_syn_gclk", NULL); - clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", 0, - SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SDHCI_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", + CLK_SET_RATE_PARENT, SPEAR1310_PERIP1_CLK_ENB, + SPEAR1310_SDHCI_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "b3000000.sdhci"); clk = clk_register_aux("cfxd_syn_clk", "cfxd_syn_gclk", "vco1div2_clk", @@ -574,9 +575,9 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, "cfxd_syn_clk", NULL); clk_register_clkdev(clk1, "cfxd_syn_gclk", NULL); - clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", 0, - SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CFXD_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", + CLK_SET_RATE_PARENT, SPEAR1310_PERIP1_CLK_ENB, + SPEAR1310_CFXD_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "b2800000.cf"); clk_register_clkdev(clk, NULL, "arasan_xd"); @@ -587,9 +588,9 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk1, "c3_syn_gclk", NULL); clk = clk_register_mux(NULL, "c3_mclk", c3_parents, - ARRAY_SIZE(c3_parents), 0, SPEAR1310_PERIP_CLK_CFG, - SPEAR1310_C3_CLK_SHIFT, SPEAR1310_C3_CLK_MASK, 0, - &_lock); + ARRAY_SIZE(c3_parents), CLK_SET_RATE_PARENT, + SPEAR1310_PERIP_CLK_CFG, SPEAR1310_C3_CLK_SHIFT, + SPEAR1310_C3_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "c3_mclk", NULL); clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", 0, @@ -630,7 +631,7 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, "clcd_syn_clk", NULL); clk = clk_register_mux(NULL, "clcd_pixel_mclk", clcd_pixel_parents, - ARRAY_SIZE(clcd_pixel_parents), 0, + ARRAY_SIZE(clcd_pixel_parents), CLK_SET_RATE_PARENT, SPEAR1310_PERIP_CLK_CFG, SPEAR1310_CLCD_CLK_SHIFT, SPEAR1310_CLCD_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "clcd_pixel_mclk", NULL); @@ -653,10 +654,10 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, "i2s_prs1_clk", NULL); clk = clk_register_mux(NULL, "i2s_ref_mclk", i2s_ref_parents, - ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1310_I2S_CLK_CFG, - SPEAR1310_I2S_REF_SHIFT, SPEAR1310_I2S_REF_SEL_MASK, 0, - &_lock); - clk_register_clkdev(clk, "i2s_ref_clk", NULL); + ARRAY_SIZE(i2s_ref_parents), CLK_SET_RATE_PARENT, + SPEAR1310_I2S_CLK_CFG, SPEAR1310_I2S_REF_SHIFT, + SPEAR1310_I2S_REF_SEL_MASK, 0, &_lock); + clk_register_clkdev(clk, "i2s_ref_mclk", NULL); clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mclk", 0, SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_I2S_REF_PAD_CLK_ENB, @@ -753,9 +754,9 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, "adc_syn_clk", NULL); clk_register_clkdev(clk1, "adc_syn_gclk", NULL); - clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", 0, - SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_ADC_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", + CLK_SET_RATE_PARENT, SPEAR1310_PERIP1_CLK_ENB, + SPEAR1310_ADC_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "e0080000.adc"); /* clock derived from apb clk */ diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c index 020431ac163d..aa5ed435fbad 100644 --- a/drivers/clk/spear/spear1340_clock.c +++ b/drivers/clk/spear/spear1340_clock.c @@ -594,14 +594,14 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk1, "uart0_syn_gclk", NULL); clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents, - ARRAY_SIZE(uart0_parents), 0, SPEAR1340_PERIP_CLK_CFG, - SPEAR1340_UART0_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0, - &_lock); + ARRAY_SIZE(uart0_parents), CLK_SET_RATE_PARENT, + SPEAR1340_PERIP_CLK_CFG, SPEAR1340_UART0_CLK_SHIFT, + SPEAR1340_UART_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "uart0_mclk", NULL); - clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", 0, - SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART0_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", + CLK_SET_RATE_PARENT, SPEAR1340_PERIP1_CLK_ENB, + SPEAR1340_UART0_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "e0000000.serial"); clk = clk_register_aux("uart1_syn_clk", "uart1_syn_gclk", @@ -627,9 +627,9 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk, "sdhci_syn_clk", NULL); clk_register_clkdev(clk1, "sdhci_syn_gclk", NULL); - clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", 0, - SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SDHCI_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", + CLK_SET_RATE_PARENT, SPEAR1340_PERIP1_CLK_ENB, + SPEAR1340_SDHCI_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "b3000000.sdhci"); clk = clk_register_aux("cfxd_syn_clk", "cfxd_syn_gclk", "vco1div2_clk", @@ -638,9 +638,9 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk, "cfxd_syn_clk", NULL); clk_register_clkdev(clk1, "cfxd_syn_gclk", NULL); - clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", 0, - SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CFXD_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", + CLK_SET_RATE_PARENT, SPEAR1340_PERIP1_CLK_ENB, + SPEAR1340_CFXD_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "b2800000.cf"); clk_register_clkdev(clk, NULL, "arasan_xd"); @@ -651,12 +651,12 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk1, "c3_syn_gclk", NULL); clk = clk_register_mux(NULL, "c3_mclk", c3_parents, - ARRAY_SIZE(c3_parents), 0, SPEAR1340_PERIP_CLK_CFG, - SPEAR1340_C3_CLK_SHIFT, SPEAR1340_C3_CLK_MASK, 0, - &_lock); + ARRAY_SIZE(c3_parents), CLK_SET_RATE_PARENT, + SPEAR1340_PERIP_CLK_CFG, SPEAR1340_C3_CLK_SHIFT, + SPEAR1340_C3_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "c3_mclk", NULL); - clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", 0, + clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", CLK_SET_RATE_PARENT, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_C3_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "e1800000.c3"); @@ -694,7 +694,7 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk, "clcd_syn_clk", NULL); clk = clk_register_mux(NULL, "clcd_pixel_mclk", clcd_pixel_parents, - ARRAY_SIZE(clcd_pixel_parents), 0, + ARRAY_SIZE(clcd_pixel_parents), CLK_SET_RATE_PARENT, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_CLCD_CLK_SHIFT, SPEAR1340_CLCD_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "clcd_pixel_mclk", NULL); @@ -711,15 +711,16 @@ void __init spear1340_clk_init(void) 0, &_lock); clk_register_clkdev(clk, "i2s_src_mclk", NULL); - clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", 0, - SPEAR1340_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl, + clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", + CLK_SET_RATE_PARENT, SPEAR1340_I2S_CLK_CFG, + &i2s_prs1_masks, i2s_prs1_rtbl, ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL); clk_register_clkdev(clk, "i2s_prs1_clk", NULL); clk = clk_register_mux(NULL, "i2s_ref_mclk", i2s_ref_parents, - ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1340_I2S_CLK_CFG, - SPEAR1340_I2S_REF_SHIFT, SPEAR1340_I2S_REF_SEL_MASK, 0, - &_lock); + ARRAY_SIZE(i2s_ref_parents), CLK_SET_RATE_PARENT, + SPEAR1340_I2S_CLK_CFG, SPEAR1340_I2S_REF_SHIFT, + SPEAR1340_I2S_REF_SEL_MASK, 0, &_lock); clk_register_clkdev(clk, "i2s_ref_mclk", NULL); clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mclk", 0, @@ -805,9 +806,9 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk, "adc_syn_clk", NULL); clk_register_clkdev(clk1, "adc_syn_gclk", NULL); - clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", 0, - SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_ADC_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", + CLK_SET_RATE_PARENT, SPEAR1340_PERIP1_CLK_ENB, + SPEAR1340_ADC_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "e0080000.adc"); /* clock derived from apb clk */ @@ -874,9 +875,9 @@ void __init spear1340_clk_init(void) &_lock); clk_register_clkdev(clk, "gen_syn3_clk", NULL); - clk = clk_register_gate(NULL, "mali_clk", "gen_syn3_clk", 0, - SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_MALI_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "mali_clk", "gen_syn3_clk", + CLK_SET_RATE_PARENT, SPEAR1340_PERIP3_CLK_ENB, + SPEAR1340_MALI_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "mali"); clk = clk_register_gate(NULL, "cec0_clk", "ahb_clk", 0, @@ -890,25 +891,25 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk, NULL, "spear_cec.1"); clk = clk_register_mux(NULL, "spdif_out_mclk", spdif_out_parents, - ARRAY_SIZE(spdif_out_parents), 0, + ARRAY_SIZE(spdif_out_parents), CLK_SET_RATE_PARENT, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_OUT_CLK_SHIFT, SPEAR1340_SPDIF_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "spdif_out_mclk", NULL); - clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mclk", 0, - SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_OUT_CLK_ENB, - 0, &_lock); + clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mclk", + CLK_SET_RATE_PARENT, SPEAR1340_PERIP3_CLK_ENB, + SPEAR1340_SPDIF_OUT_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "d0000000.spdif-out"); clk = clk_register_mux(NULL, "spdif_in_mclk", spdif_in_parents, - ARRAY_SIZE(spdif_in_parents), 0, + ARRAY_SIZE(spdif_in_parents), CLK_SET_RATE_PARENT, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_IN_CLK_SHIFT, SPEAR1340_SPDIF_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "spdif_in_mclk", NULL); - clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mclk", 0, - SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_IN_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mclk", + CLK_SET_RATE_PARENT, SPEAR1340_PERIP3_CLK_ENB, + SPEAR1340_SPDIF_IN_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "d0100000.spdif-in"); clk = clk_register_gate(NULL, "acp_clk", "acp_mclk", 0, diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index 417f93734612..4c89b143e246 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -278,23 +278,26 @@ static void __init spear320_clk_init(void) clk_register_clkdev(clk, NULL, "a9400000.i2s"); clk = clk_register_mux(NULL, "i2s_ref_clk", i2s_ref_parents, - ARRAY_SIZE(i2s_ref_parents), 0, SPEAR320_CONTROL_REG, - I2S_REF_PCLK_SHIFT, I2S_REF_PCLK_MASK, 0, &_lock); + ARRAY_SIZE(i2s_ref_parents), CLK_SET_RATE_PARENT, + SPEAR320_CONTROL_REG, I2S_REF_PCLK_SHIFT, + I2S_REF_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, "i2s_ref_clk", NULL); - clk = clk_register_fixed_factor(NULL, "i2s_sclk", "i2s_ref_clk", 0, 1, + clk = clk_register_fixed_factor(NULL, "i2s_sclk", "i2s_ref_clk", + CLK_SET_RATE_PARENT, 1, 4); clk_register_clkdev(clk, "i2s_sclk", NULL); clk = clk_register_mux(NULL, "rs485_clk", uartx_parents, - ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, - SPEAR320_RS485_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, - &_lock); + ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT, + SPEAR320_EXT_CTRL_REG, SPEAR320_RS485_PCLK_SHIFT, + SPEAR320_UARTX_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "a9300000.serial"); clk = clk_register_mux(NULL, "sdhci_clk", sdhci_parents, - ARRAY_SIZE(sdhci_parents), 0, SPEAR320_CONTROL_REG, - SDHCI_PCLK_SHIFT, SDHCI_PCLK_MASK, 0, &_lock); + ARRAY_SIZE(sdhci_parents), CLK_SET_RATE_PARENT, + SPEAR320_CONTROL_REG, SDHCI_PCLK_SHIFT, SDHCI_PCLK_MASK, + 0, &_lock); clk_register_clkdev(clk, NULL, "70000000.sdhci"); clk = clk_register_mux(NULL, "smii_pclk", smii0_parents, @@ -306,38 +309,39 @@ static void __init spear320_clk_init(void) clk_register_clkdev(clk, NULL, "smii"); clk = clk_register_mux(NULL, "uart1_clk", uartx_parents, - ARRAY_SIZE(uartx_parents), 0, SPEAR320_CONTROL_REG, - UART1_PCLK_SHIFT, UART1_PCLK_MASK, 0, &_lock); + ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT, + SPEAR320_CONTROL_REG, UART1_PCLK_SHIFT, UART1_PCLK_MASK, + 0, &_lock); clk_register_clkdev(clk, NULL, "a3000000.serial"); clk = clk_register_mux(NULL, "uart2_clk", uartx_parents, - ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, - SPEAR320_UART2_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, - &_lock); + ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT, + SPEAR320_EXT_CTRL_REG, SPEAR320_UART2_PCLK_SHIFT, + SPEAR320_UARTX_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "a4000000.serial"); clk = clk_register_mux(NULL, "uart3_clk", uartx_parents, - ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, - SPEAR320_UART3_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, - &_lock); + ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT, + SPEAR320_EXT_CTRL_REG, SPEAR320_UART3_PCLK_SHIFT, + SPEAR320_UARTX_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "a9100000.serial"); clk = clk_register_mux(NULL, "uart4_clk", uartx_parents, - ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, - SPEAR320_UART4_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, - &_lock); + ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT, + SPEAR320_EXT_CTRL_REG, SPEAR320_UART4_PCLK_SHIFT, + SPEAR320_UARTX_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "a9200000.serial"); clk = clk_register_mux(NULL, "uart5_clk", uartx_parents, - ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, - SPEAR320_UART5_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, - &_lock); + ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT, + SPEAR320_EXT_CTRL_REG, SPEAR320_UART5_PCLK_SHIFT, + SPEAR320_UARTX_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "60000000.serial"); clk = clk_register_mux(NULL, "uart6_clk", uartx_parents, - ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, - SPEAR320_UART6_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, - &_lock); + ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT, + SPEAR320_EXT_CTRL_REG, SPEAR320_UART6_PCLK_SHIFT, + SPEAR320_UARTX_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "60100000.serial"); } #else @@ -386,7 +390,8 @@ void __init spear3xx_clk_init(void) clk_register_clkdev(clk1, "pll2_clk", NULL); /* clock derived from pll1 clk */ - clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1); + clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", + CLK_SET_RATE_PARENT, 1, 1); clk_register_clkdev(clk, "cpu_clk", NULL); clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk", @@ -401,12 +406,14 @@ void __init spear3xx_clk_init(void) clk_register_clkdev(clk1, "uart_syn_gclk", NULL); clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents, - ARRAY_SIZE(uart0_parents), 0, PERIP_CLK_CFG, - UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock); + ARRAY_SIZE(uart0_parents), CLK_SET_RATE_PARENT, + PERIP_CLK_CFG, UART_CLK_SHIFT, UART_CLK_MASK, 0, + &_lock); clk_register_clkdev(clk, "uart0_mclk", NULL); - clk = clk_register_gate(NULL, "uart0", "uart0_mclk", 0, PERIP1_CLK_ENB, - UART_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "uart0", "uart0_mclk", + CLK_SET_RATE_PARENT, PERIP1_CLK_ENB, UART_CLK_ENB, 0, + &_lock); clk_register_clkdev(clk, NULL, "d0000000.serial"); clk = clk_register_aux("firda_syn_clk", "firda_syn_gclk", "pll1_clk", 0, @@ -416,40 +423,44 @@ void __init spear3xx_clk_init(void) clk_register_clkdev(clk1, "firda_syn_gclk", NULL); clk = clk_register_mux(NULL, "firda_mclk", firda_parents, - ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG, - FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock); + ARRAY_SIZE(firda_parents), CLK_SET_RATE_PARENT, + PERIP_CLK_CFG, FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, + &_lock); clk_register_clkdev(clk, "firda_mclk", NULL); - clk = clk_register_gate(NULL, "firda_clk", "firda_mclk", 0, - PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "firda_clk", "firda_mclk", + CLK_SET_RATE_PARENT, PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, + &_lock); clk_register_clkdev(clk, NULL, "firda"); /* gpt clocks */ clk_register_gpt("gpt0_syn_clk", "pll1_clk", 0, PRSC0_CLK_CFG, gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); clk = clk_register_mux(NULL, "gpt0_clk", gpt0_parents, - ARRAY_SIZE(gpt0_parents), 0, PERIP_CLK_CFG, - GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + ARRAY_SIZE(gpt0_parents), CLK_SET_RATE_PARENT, + PERIP_CLK_CFG, GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt0"); clk_register_gpt("gpt1_syn_clk", "pll1_clk", 0, PRSC1_CLK_CFG, gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); clk = clk_register_mux(NULL, "gpt1_mclk", gpt1_parents, - ARRAY_SIZE(gpt1_parents), 0, PERIP_CLK_CFG, - GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + ARRAY_SIZE(gpt1_parents), CLK_SET_RATE_PARENT, + PERIP_CLK_CFG, GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "gpt1_mclk", NULL); - clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0, - PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", + CLK_SET_RATE_PARENT, PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, + &_lock); clk_register_clkdev(clk, NULL, "gpt1"); clk_register_gpt("gpt2_syn_clk", "pll1_clk", 0, PRSC2_CLK_CFG, gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); clk = clk_register_mux(NULL, "gpt2_mclk", gpt2_parents, - ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG, - GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + ARRAY_SIZE(gpt2_parents), CLK_SET_RATE_PARENT, + PERIP_CLK_CFG, GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "gpt2_mclk", NULL); - clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0, - PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", + CLK_SET_RATE_PARENT, PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, + &_lock); clk_register_clkdev(clk, NULL, "gpt2"); /* general synths clocks */ @@ -587,20 +598,24 @@ void __init spear3xx_clk_init(void) RAS_CLK_ENB, RAS_48M_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, "ras_pll3_clk", NULL); - clk = clk_register_gate(NULL, "ras_syn0_gclk", "gen0_syn_gclk", 0, - RAS_CLK_ENB, RAS_SYNT0_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "ras_syn0_gclk", "gen0_syn_gclk", + CLK_SET_RATE_PARENT, RAS_CLK_ENB, RAS_SYNT0_CLK_ENB, 0, + &_lock); clk_register_clkdev(clk, "ras_syn0_gclk", NULL); - clk = clk_register_gate(NULL, "ras_syn1_gclk", "gen1_syn_gclk", 0, - RAS_CLK_ENB, RAS_SYNT1_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "ras_syn1_gclk", "gen1_syn_gclk", + CLK_SET_RATE_PARENT, RAS_CLK_ENB, RAS_SYNT1_CLK_ENB, 0, + &_lock); clk_register_clkdev(clk, "ras_syn1_gclk", NULL); - clk = clk_register_gate(NULL, "ras_syn2_gclk", "gen2_syn_gclk", 0, - RAS_CLK_ENB, RAS_SYNT2_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "ras_syn2_gclk", "gen2_syn_gclk", + CLK_SET_RATE_PARENT, RAS_CLK_ENB, RAS_SYNT2_CLK_ENB, 0, + &_lock); clk_register_clkdev(clk, "ras_syn2_gclk", NULL); - clk = clk_register_gate(NULL, "ras_syn3_gclk", "gen3_syn_gclk", 0, - RAS_CLK_ENB, RAS_SYNT3_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "ras_syn3_gclk", "gen3_syn_gclk", + CLK_SET_RATE_PARENT, RAS_CLK_ENB, RAS_SYNT3_CLK_ENB, 0, + &_lock); clk_register_clkdev(clk, "ras_syn3_gclk", NULL); if (of_machine_is_compatible("st,spear300")) diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c index c7fa67c7c0ab..e8d2b3109b34 100644 --- a/drivers/clk/spear/spear6xx_clock.c +++ b/drivers/clk/spear/spear6xx_clock.c @@ -156,7 +156,8 @@ void __init spear6xx_clk_init(void) clk_register_clkdev(clk, NULL, "wdt"); /* clock derived from pll1 clk */ - clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1); + clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", + CLK_SET_RATE_PARENT, 1, 1); clk_register_clkdev(clk, "cpu_clk", NULL); clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk", -- cgit v1.2.3 From cd4b519aa5bdce92fcacc1d4bbe0fa16b4e16144 Mon Sep 17 00:00:00 2001 From: Vipul Kumar Samar Date: Sat, 10 Nov 2012 12:13:44 +0530 Subject: CLK: SPEAr: Add missing clocks This patch adds missing clocks: twd and macb. Signed-off-by: Vipul Kumar Samar Signed-off-by: Deepak Sikri Signed-off-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/spear/spear1310_clock.c | 4 ++++ drivers/clk/spear/spear1340_clock.c | 4 ++++ drivers/clk/spear/spear3xx_clock.c | 8 ++++++++ 3 files changed, 16 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c index 2809b670e22c..b64d51153a78 100644 --- a/drivers/clk/spear/spear1310_clock.c +++ b/drivers/clk/spear/spear1310_clock.c @@ -491,6 +491,10 @@ void __init spear1310_clk_init(void) 2); clk_register_clkdev(clk, NULL, "ec800620.wdt"); + clk = clk_register_fixed_factor(NULL, "smp_twd_clk", "cpu_clk", 0, 1, + 2); + clk_register_clkdev(clk, NULL, "smp_twd"); + clk = clk_register_fixed_factor(NULL, "ahb_clk", "pll1_clk", 0, 1, 6); clk_register_clkdev(clk, "ahb_clk", NULL); diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c index aa5ed435fbad..8f00533959a5 100644 --- a/drivers/clk/spear/spear1340_clock.c +++ b/drivers/clk/spear/spear1340_clock.c @@ -535,6 +535,10 @@ void __init spear1340_clk_init(void) 2); clk_register_clkdev(clk, NULL, "ec800620.wdt"); + clk = clk_register_fixed_factor(NULL, "smp_twd_clk", "cpu_clk", 0, 1, + 2); + clk_register_clkdev(clk, NULL, "smp_twd"); + clk = clk_register_mux(NULL, "ahb_clk", ahb_parents, ARRAY_SIZE(ahb_parents), 0, SPEAR1340_SYS_CLK_CTRL, SPEAR1340_HCLK_SRC_SEL_SHIFT, diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index 4c89b143e246..ff35ebca1d8d 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -288,6 +288,14 @@ static void __init spear320_clk_init(void) 4); clk_register_clkdev(clk, "i2s_sclk", NULL); + clk = clk_register_fixed_factor(NULL, "macb1_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, "hclk", "aa000000.eth"); + + clk = clk_register_fixed_factor(NULL, "macb2_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, "hclk", "ab000000.eth"); + clk = clk_register_mux(NULL, "rs485_clk", uartx_parents, ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT, SPEAR320_EXT_CTRL_REG, SPEAR320_RS485_PCLK_SHIFT, -- cgit v1.2.3 From ef0fd0a207c00b09449f33724322ba762d822d97 Mon Sep 17 00:00:00 2001 From: Deepak Sikri Date: Sat, 10 Nov 2012 12:13:45 +0530 Subject: CLK: SPEAr: Update clock rate table This patch updates the existing rate tables with new frequencies. Signed-off-by: Deepak Sikri Signed-off-by: Vipul Kumar Samar Signed-off-by: Rajeev Kumar Signed-off-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/spear/spear1310_clock.c | 14 ++++++ drivers/clk/spear/spear1340_clock.c | 89 ++++++++++++++++++++++++++++--------- drivers/clk/spear/spear3xx_clock.c | 6 +++ drivers/clk/spear/spear6xx_clock.c | 1 + 4 files changed, 89 insertions(+), 21 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c index b64d51153a78..bc7f37e131cd 100644 --- a/drivers/clk/spear/spear1310_clock.c +++ b/drivers/clk/spear/spear1310_clock.c @@ -313,6 +313,20 @@ static struct aux_clk_masks i2s_sclk_masks = { /* i2s prs1 aux rate configuration table, in ascending order of rates */ static struct aux_rate_tbl i2s_prs1_rtbl[] = { /* For parent clk = 49.152 MHz */ + {.xscale = 1, .yscale = 12, .eq = 0}, /* 2.048 MHz, smp freq = 8Khz */ + {.xscale = 11, .yscale = 96, .eq = 0}, /* 2.816 MHz, smp freq = 11Khz */ + {.xscale = 1, .yscale = 6, .eq = 0}, /* 4.096 MHz, smp freq = 16Khz */ + {.xscale = 11, .yscale = 48, .eq = 0}, /* 5.632 MHz, smp freq = 22Khz */ + + /* + * with parent clk = 49.152, freq gen is 8.192 MHz, smp freq = 32Khz + * with parent clk = 12.288, freq gen is 2.048 MHz, smp freq = 8Khz + */ + {.xscale = 1, .yscale = 3, .eq = 0}, + + /* For parent clk = 49.152 MHz */ + {.xscale = 17, .yscale = 37, .eq = 0}, /* 11.289 MHz, smp freq = 44Khz*/ + {.xscale = 1, .yscale = 2, .eq = 0}, /* 12.288 MHz */ }; diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c index 8f00533959a5..d4de680bf51f 100644 --- a/drivers/clk/spear/spear1340_clock.c +++ b/drivers/clk/spear/spear1340_clock.c @@ -190,6 +190,7 @@ static struct pll_rate_tbl pll4_rtbl[] = { * different values of vco1div2 */ static struct frac_rate_tbl amba_synth_rtbl[] = { + {.div = 0x073A8}, /* for vco1div2 = 600 MHz */ {.div = 0x06062}, /* for vco1div2 = 500 MHz */ {.div = 0x04D1B}, /* for vco1div2 = 400 MHz */ {.div = 0x04000}, /* for vco1div2 = 332 MHz */ @@ -220,6 +221,12 @@ static struct frac_rate_tbl amba_synth_rtbl[] = { * 500 400 200 0x02800 * 500 500 250 0x02000 * -------------------------------------------------------------------- + * 600 200 100 0x06000 + * 600 250 125 0x04CCE + * 600 332 166 0x039D5 + * 600 400 200 0x03000 + * 600 500 250 0x02666 + * -------------------------------------------------------------------- * 664 200 100 0x06a38 * 664 250 125 0x054FD * 664 332 166 0x04000 @@ -238,28 +245,50 @@ static struct frac_rate_tbl sys_synth_rtbl[] = { {.div = 0x08000}, {.div = 0x06a38}, {.div = 0x06666}, + {.div = 0x06000}, {.div = 0x054FD}, {.div = 0x05000}, {.div = 0x04D18}, + {.div = 0x04CCE}, {.div = 0x04000}, + {.div = 0x039D5}, {.div = 0x0351E}, {.div = 0x03333}, {.div = 0x03031}, + {.div = 0x03000}, {.div = 0x02A7E}, {.div = 0x02800}, {.div = 0x0268D}, + {.div = 0x02666}, {.div = 0x02000}, }; /* aux rate configuration table, in ascending order of rates */ static struct aux_rate_tbl aux_rtbl[] = { - /* For VCO1div2 = 500 MHz */ - {.xscale = 10, .yscale = 204, .eq = 0}, /* 12.29 MHz */ - {.xscale = 4, .yscale = 21, .eq = 0}, /* 48 MHz */ - {.xscale = 2, .yscale = 6, .eq = 0}, /* 83 MHz */ - {.xscale = 2, .yscale = 4, .eq = 0}, /* 125 MHz */ - {.xscale = 1, .yscale = 3, .eq = 1}, /* 166 MHz */ - {.xscale = 1, .yscale = 2, .eq = 1}, /* 250 MHz */ + /* 12.29MHz for vic1div2=600MHz and 10.24MHz for VCO1div2=500MHz */ + {.xscale = 5, .yscale = 122, .eq = 0}, + /* 14.70MHz for vic1div2=600MHz and 12.29MHz for VCO1div2=500MHz */ + {.xscale = 10, .yscale = 204, .eq = 0}, + /* 48MHz for vic1div2=600MHz and 40 MHz for VCO1div2=500MHz */ + {.xscale = 4, .yscale = 25, .eq = 0}, + /* 57.14MHz for vic1div2=600MHz and 48 MHz for VCO1div2=500MHz */ + {.xscale = 4, .yscale = 21, .eq = 0}, + /* 83.33MHz for vic1div2=600MHz and 69.44MHz for VCO1div2=500MHz */ + {.xscale = 5, .yscale = 18, .eq = 0}, + /* 100MHz for vic1div2=600MHz and 83.33 MHz for VCO1div2=500MHz */ + {.xscale = 2, .yscale = 6, .eq = 0}, + /* 125MHz for vic1div2=600MHz and 104.1MHz for VCO1div2=500MHz */ + {.xscale = 5, .yscale = 12, .eq = 0}, + /* 150MHz for vic1div2=600MHz and 125MHz for VCO1div2=500MHz */ + {.xscale = 2, .yscale = 4, .eq = 0}, + /* 166MHz for vic1div2=600MHz and 138.88MHz for VCO1div2=500MHz */ + {.xscale = 5, .yscale = 18, .eq = 1}, + /* 200MHz for vic1div2=600MHz and 166MHz for VCO1div2=500MHz */ + {.xscale = 1, .yscale = 3, .eq = 1}, + /* 250MHz for vic1div2=600MHz and 208.33MHz for VCO1div2=500MHz */ + {.xscale = 5, .yscale = 12, .eq = 1}, + /* 300MHz for vic1div2=600MHz and 250MHz for VCO1div2=500MHz */ + {.xscale = 1, .yscale = 2, .eq = 1}, }; /* gmac rate configuration table, in ascending order of rates */ @@ -273,16 +302,23 @@ static struct aux_rate_tbl gmac_rtbl[] = { /* clcd rate configuration table, in ascending order of rates */ static struct frac_rate_tbl clcd_rtbl[] = { + {.div = 0x18000}, /* 25 Mhz , for vc01div4 = 300 MHz*/ + {.div = 0x1638E}, /* 27 Mhz , for vc01div4 = 300 MHz*/ {.div = 0x14000}, /* 25 Mhz , for vc01div4 = 250 MHz*/ {.div = 0x1284B}, /* 27 Mhz , for vc01div4 = 250 MHz*/ {.div = 0x0D8D3}, /* 58 Mhz , for vco1div4 = 393 MHz */ {.div = 0x0B72C}, /* 58 Mhz , for vco1div4 = 332 MHz */ + {.div = 0x0A584}, /* 58 Mhz , for vco1div4 = 300 MHz */ + {.div = 0x093B1}, /* 65 Mhz , for vc01div4 = 300 MHz*/ {.div = 0x089EE}, /* 58 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x081BA}, /* 74 Mhz , for vc01div4 = 300 MHz*/ {.div = 0x07BA0}, /* 65 Mhz , for vc01div4 = 250 MHz*/ {.div = 0x06f1C}, /* 72 Mhz , for vc01div4 = 250 MHz*/ {.div = 0x06E58}, /* 58 Mhz , for vco1div4 = 200 MHz */ {.div = 0x06c1B}, /* 74 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x058E3}, /* 108 Mhz , for vc01div4 = 300 MHz*/ {.div = 0x04A12}, /* 108 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x040A5}, /* 148.5 Mhz , for vc01div4 = 300 MHz*/ {.div = 0x0378E}, /* 144 Mhz , for vc01div4 = 250 MHz*/ {.div = 0x0360D}, /* 148 Mhz , for vc01div4 = 250 MHz*/ {.div = 0x035E0}, /* 148.5 MHz, for vc01div4 = 250 MHz*/ @@ -351,20 +387,31 @@ static struct aux_rate_tbl adc_rtbl[] = { /* General synth rate configuration table, in ascending order of rates */ static struct frac_rate_tbl gen_rtbl[] = { - /* For vco1div4 = 250 MHz */ - {.div = 0x1624E}, /* 22.5792 MHz */ - {.div = 0x14585}, /* 24.576 MHz */ - {.div = 0x14000}, /* 25 MHz */ - {.div = 0x0B127}, /* 45.1584 MHz */ - {.div = 0x0A000}, /* 50 MHz */ - {.div = 0x061A8}, /* 81.92 MHz */ - {.div = 0x05000}, /* 100 MHz */ - {.div = 0x02800}, /* 200 MHz */ - {.div = 0x02620}, /* 210 MHz */ - {.div = 0x02460}, /* 220 MHz */ - {.div = 0x022C0}, /* 230 MHz */ - {.div = 0x02160}, /* 240 MHz */ - {.div = 0x02000}, /* 250 MHz */ + {.div = 0x1A92B}, /* 22.5792 MHz for vco1div4=300 MHz*/ + {.div = 0x186A0}, /* 24.576 MHz for vco1div4=300 MHz*/ + {.div = 0x18000}, /* 25 MHz for vco1div4=300 MHz*/ + {.div = 0x1624E}, /* 22.5792 MHz for vco1div4=250 MHz*/ + {.div = 0x14585}, /* 24.576 MHz for vco1div4=250 MHz*/ + {.div = 0x14000}, /* 25 MHz for vco1div4=250 MHz*/ + {.div = 0x0D495}, /* 45.1584 MHz for vco1div4=300 MHz*/ + {.div = 0x0C000}, /* 50 MHz for vco1div4=300 MHz*/ + {.div = 0x0B127}, /* 45.1584 MHz for vco1div4=250 MHz*/ + {.div = 0x0A000}, /* 50 MHz for vco1div4=250 MHz*/ + {.div = 0x07530}, /* 81.92 MHz for vco1div4=300 MHz*/ + {.div = 0x061A8}, /* 81.92 MHz for vco1div4=250 MHz*/ + {.div = 0x06000}, /* 100 MHz for vco1div4=300 MHz*/ + {.div = 0x05000}, /* 100 MHz for vco1div4=250 MHz*/ + {.div = 0x03000}, /* 200 MHz for vco1div4=300 MHz*/ + {.div = 0x02DB6}, /* 210 MHz for vco1div4=300 MHz*/ + {.div = 0x02BA2}, /* 220 MHz for vco1div4=300 MHz*/ + {.div = 0x029BD}, /* 230 MHz for vco1div4=300 MHz*/ + {.div = 0x02800}, /* 200 MHz for vco1div4=250 MHz*/ + {.div = 0x02666}, /* 250 MHz for vco1div4=300 MHz*/ + {.div = 0x02620}, /* 210 MHz for vco1div4=250 MHz*/ + {.div = 0x02460}, /* 220 MHz for vco1div4=250 MHz*/ + {.div = 0x022C0}, /* 230 MHz for vco1div4=250 MHz*/ + {.div = 0x02160}, /* 240 MHz for vco1div4=250 MHz*/ + {.div = 0x02000}, /* 250 MHz for vco1div4=250 MHz*/ }; /* clock parents */ diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index ff35ebca1d8d..a07c067fe960 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -107,6 +107,12 @@ static struct pll_rate_tbl pll_rtbl[] = { /* aux rate configuration table, in ascending order of rates */ static struct aux_rate_tbl aux_rtbl[] = { /* For PLL1 = 332 MHz */ + {.xscale = 1, .yscale = 81, .eq = 0}, /* 2.049 MHz */ + {.xscale = 1, .yscale = 59, .eq = 0}, /* 2.822 MHz */ + {.xscale = 2, .yscale = 81, .eq = 0}, /* 4.098 MHz */ + {.xscale = 3, .yscale = 89, .eq = 0}, /* 5.644 MHz */ + {.xscale = 4, .yscale = 81, .eq = 0}, /* 8.197 MHz */ + {.xscale = 4, .yscale = 59, .eq = 0}, /* 11.254 MHz */ {.xscale = 2, .yscale = 27, .eq = 0}, /* 12.296 MHz */ {.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */ {.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */ diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c index e8d2b3109b34..8a81770be4c5 100644 --- a/drivers/clk/spear/spear6xx_clock.c +++ b/drivers/clk/spear/spear6xx_clock.c @@ -92,6 +92,7 @@ static struct pll_rate_tbl pll_rtbl[] = { /* aux rate configuration table, in ascending order of rates */ static struct aux_rate_tbl aux_rtbl[] = { /* For PLL1 = 332 MHz */ + {.xscale = 2, .yscale = 27, .eq = 0}, /* 12.296 MHz */ {.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */ {.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */ {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */ -- cgit v1.2.3 From 1b2d4ad585d5bfb57603aed08e8fab99069e16e7 Mon Sep 17 00:00:00 2001 From: Deepak Sikri Date: Sat, 10 Nov 2012 12:13:46 +0530 Subject: CLK: SPEAr: Correct index scanning done for clock synths The patch corrects the case when the rate table is being scanned for a given frequency, and the search frequency is beyond the maximum frequency indexed in the table. By default, the system should be set at max frequency present in the rate table. This patch correctly returns the corresponding index value. Signed-off-by: Deepak Sikri Signed-off-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/spear/clk.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/clk') diff --git a/drivers/clk/spear/clk.c b/drivers/clk/spear/clk.c index 7cd63788d546..628b6d5ed3d9 100644 --- a/drivers/clk/spear/clk.c +++ b/drivers/clk/spear/clk.c @@ -32,5 +32,8 @@ long clk_round_rate_index(struct clk_hw *hw, unsigned long drate, } } + if ((*index) == rtbl_cnt) + (*index)--; + return rate; } -- cgit v1.2.3 From b70e6d009a88e09805152597e02f3d97a1d6ee99 Mon Sep 17 00:00:00 2001 From: Vipul Kumar Samar Date: Sat, 10 Nov 2012 12:13:47 +0530 Subject: CLK: SPEAr: Remove unused dummy apb_pclk Dummy clocks were added for ARM platforms, so that clk_get() for interface clk doesn't fail for amba devices from amba_probe(). Because there is no amba device for SPEAr that doesn't have a valid clock with dev_id for SPEAr, we don't need these dummy clocks. Hence, remove them. Signed-off-by: Vipul Kumar Samar Signed-off-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/spear/spear1310_clock.c | 3 --- drivers/clk/spear/spear1340_clock.c | 3 --- drivers/clk/spear/spear3xx_clock.c | 3 --- drivers/clk/spear/spear6xx_clock.c | 3 --- 4 files changed, 12 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c index bc7f37e131cd..147e25f00405 100644 --- a/drivers/clk/spear/spear1310_clock.c +++ b/drivers/clk/spear/spear1310_clock.c @@ -388,9 +388,6 @@ void __init spear1310_clk_init(void) { struct clk *clk, *clk1; - clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); - clk_register_clkdev(clk, "apb_pclk", NULL); - clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, 32000); clk_register_clkdev(clk, "osc_32k_clk", NULL); diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c index d4de680bf51f..82abea366b78 100644 --- a/drivers/clk/spear/spear1340_clock.c +++ b/drivers/clk/spear/spear1340_clock.c @@ -445,9 +445,6 @@ void __init spear1340_clk_init(void) { struct clk *clk, *clk1; - clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); - clk_register_clkdev(clk, "apb_pclk", NULL); - clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, 32000); clk_register_clkdev(clk, "osc_32k_clk", NULL); diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index a07c067fe960..33d3ac588da7 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -366,9 +366,6 @@ void __init spear3xx_clk_init(void) { struct clk *clk, *clk1; - clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); - clk_register_clkdev(clk, "apb_pclk", NULL); - clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, 32000); clk_register_clkdev(clk, "osc_32k_clk", NULL); diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c index 8a81770be4c5..e862a333ad30 100644 --- a/drivers/clk/spear/spear6xx_clock.c +++ b/drivers/clk/spear/spear6xx_clock.c @@ -119,9 +119,6 @@ void __init spear6xx_clk_init(void) { struct clk *clk, *clk1; - clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); - clk_register_clkdev(clk, "apb_pclk", NULL); - clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, 32000); clk_register_clkdev(clk, "osc_32k_clk", NULL); -- cgit v1.2.3 From 07e812a0aeaaf21a23b3db5048a65c7042248321 Mon Sep 17 00:00:00 2001 From: Vipul Kumar Samar Date: Wed, 17 Oct 2012 12:08:26 +0530 Subject: ARM: SPEAr1310: Move 1310 specific misc register into machine specific files This patch moves some global macro definitions to the files where they are used. Its a step towards removing spear.h completely later on. Signed-off-by: Vipul Kumar Samar Signed-off-by: Viresh Kumar --- drivers/clk/spear/spear1310_clock.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/clk') diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c index 0fcec2aae19c..cf7e17685a2c 100644 --- a/drivers/clk/spear/spear1310_clock.c +++ b/drivers/clk/spear/spear1310_clock.c @@ -20,6 +20,7 @@ #include #include "clk.h" +#define VA_SPEAR1310_RAS_BASE IOMEM(UL(0xFA400000)) /* PLL related registers and bit values */ #define SPEAR1310_PLL_CFG (VA_MISC_BASE + 0x210) /* PLL_CFG bit values */ -- cgit v1.2.3 From 45228ef32240957b1536fbba1ca12377cb2e587c Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Thu, 22 Nov 2012 11:35:39 +0100 Subject: clk: ux500: Initial support for abx500 clock driver The abx500 clock driver is a platform driver which will be initialized during arch init. The platform device shall be added from the ab-core driver as a mfd child device to maintain correct boot sequence. Depending on what ab version we use, different clock definitions will be added. Signed-off-by: Ulf Hansson Reviewed-by: Linus Walleij Signed-off-by: Mike Turquette --- drivers/clk/ux500/Makefile | 3 ++ drivers/clk/ux500/abx500-clk.c | 73 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 76 insertions(+) create mode 100644 drivers/clk/ux500/abx500-clk.c (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/Makefile b/drivers/clk/ux500/Makefile index 858fbfe66281..bcc0c11a507c 100644 --- a/drivers/clk/ux500/Makefile +++ b/drivers/clk/ux500/Makefile @@ -10,3 +10,6 @@ obj-y += clk-prcmu.o obj-y += u8500_clk.o obj-y += u9540_clk.o obj-y += u8540_clk.o + +# ABX500 clock driver +obj-y += abx500-clk.o diff --git a/drivers/clk/ux500/abx500-clk.c b/drivers/clk/ux500/abx500-clk.c new file mode 100644 index 000000000000..e27c52317ffe --- /dev/null +++ b/drivers/clk/ux500/abx500-clk.c @@ -0,0 +1,73 @@ +/* + * abx500 clock implementation for ux500 platform. + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include +#include +#include +#include +#include + +/* TODO: Add clock implementations here */ + + +/* Clock definitions for ab8500 */ +static int ab8500_reg_clks(struct device *dev) +{ + return 0; +} + +/* Clock definitions for ab8540 */ +static int ab8540_reg_clks(struct device *dev) +{ + return 0; +} + +/* Clock definitions for ab9540 */ +static int ab9540_reg_clks(struct device *dev) +{ + return 0; +} + +static int __devinit abx500_clk_probe(struct platform_device *pdev) +{ + struct ab8500 *parent = dev_get_drvdata(pdev->dev.parent); + int ret; + + if (is_ab8500(parent) || is_ab8505(parent)) { + ret = ab8500_reg_clks(&pdev->dev); + } else if (is_ab8540(parent)) { + ret = ab8540_reg_clks(&pdev->dev); + } else if (is_ab9540(parent)) { + ret = ab9540_reg_clks(&pdev->dev); + } else { + dev_err(&pdev->dev, "non supported plf id\n"); + return -ENODEV; + } + + return ret; +} + +static struct platform_driver abx500_clk_driver = { + .driver = { + .name = "abx500-clk", + .owner = THIS_MODULE, + }, + .probe = abx500_clk_probe, +}; + +static int __init abx500_clk_init(void) +{ + return platform_driver_register(&abx500_clk_driver); +} + +arch_initcall(abx500_clk_init); + +MODULE_AUTHOR("Ulf Hansson Date: Thu, 22 Nov 2012 20:15:05 +0100 Subject: clk: clock multiplexers may register out of order When a clock, C is initialised any orphan clocks listing C as a possible parent are reparented to it regardless of the parent requested by the orphan's get_parent() operation. This means that multiplexers registered before their parents are reparented to the first parent subsequently declared, regardless of the selection made by the hardware registers. For example: static const char *sel[] = { "srcA", "srcB", "dummy", "srcC" }; child = clk_register_mux(NULL, "child", sel, ARRAY_SIZE(sel), ...); clk_register_fixed(NULL, "dummy", ...); clk_register_fixed(NULL, "srcA", ...); clk_register_fixed(NULL, "srcB", ...); clk_register_fixed(NULL, "srcC", ...); Causes child's parent to always be "dummy". To fix this, when an orphanned clock has a get_parent() operation, only reparent to the clock indicated by get_parent(). Signed-off-by: Martin Fuzzey Signed-off-by: Mike Turquette [mturquette@linaro.org: improve $SUBJECT] --- drivers/clk/clk.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 2fd28ddd06c9..9955ad7e786e 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1298,12 +1298,20 @@ int __clk_init(struct device *dev, struct clk *clk) * walk the list of orphan clocks and reparent any that are children of * this clock */ - hlist_for_each_entry_safe(orphan, tmp, tmp2, &clk_orphan_list, child_node) + hlist_for_each_entry_safe(orphan, tmp, tmp2, &clk_orphan_list, child_node) { + if (orphan->ops->get_parent) { + i = orphan->ops->get_parent(orphan->hw); + if (!strcmp(clk->name, orphan->parent_names[i])) + __clk_reparent(orphan, clk); + continue; + } + for (i = 0; i < orphan->num_parents; i++) if (!strcmp(clk->name, orphan->parent_names[i])) { __clk_reparent(orphan, clk); break; } + } /* * optional platform-specific magic -- cgit v1.2.3 From f9cfa6305198f190a685e45a3d78140ea8f298a9 Mon Sep 17 00:00:00 2001 From: Bill Pemberton Date: Mon, 19 Nov 2012 13:19:59 -0500 Subject: clk: remove use of __devexit_p CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton Acked-by: Mike Turquette Acked-by: Mark Brown Signed-off-by: Greg Kroah-Hartman --- drivers/clk/clk-max77686.c | 2 +- drivers/clk/clk-wm831x.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c index ac5f5434cb9a..fff7e6f36ef1 100644 --- a/drivers/clk/clk-max77686.c +++ b/drivers/clk/clk-max77686.c @@ -223,7 +223,7 @@ static struct platform_driver max77686_clk_driver = { .owner = THIS_MODULE, }, .probe = max77686_clk_probe, - .remove = __devexit_p(max77686_clk_remove), + .remove = max77686_clk_remove, .id_table = max77686_clk_id, }; diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c index e7b7765e85f3..3cbd662adcf2 100644 --- a/drivers/clk/clk-wm831x.c +++ b/drivers/clk/clk-wm831x.c @@ -412,7 +412,7 @@ static int __devexit wm831x_clk_remove(struct platform_device *pdev) static struct platform_driver wm831x_clk_driver = { .probe = wm831x_clk_probe, - .remove = __devexit_p(wm831x_clk_remove), + .remove = wm831x_clk_remove, .driver = { .name = "wm831x-clk", .owner = THIS_MODULE, -- cgit v1.2.3 From 018ae93fbc6cb2c843bb899bce05328c393b373d Mon Sep 17 00:00:00 2001 From: Bill Pemberton Date: Mon, 19 Nov 2012 13:22:52 -0500 Subject: clk: remove use of __devinit CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton Acked-by: Mike Turquette Acked-by: Mark Brown Signed-off-by: Greg Kroah-Hartman --- drivers/clk/clk-max77686.c | 2 +- drivers/clk/clk-wm831x.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c index fff7e6f36ef1..fe449c25efd1 100644 --- a/drivers/clk/clk-max77686.c +++ b/drivers/clk/clk-max77686.c @@ -143,7 +143,7 @@ static int max77686_clk_register(struct device *dev, return 0; } -static __devinit int max77686_clk_probe(struct platform_device *pdev) +static int max77686_clk_probe(struct platform_device *pdev) { struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct max77686_clk **max77686_clks; diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c index 3cbd662adcf2..d0f1442fdae2 100644 --- a/drivers/clk/clk-wm831x.c +++ b/drivers/clk/clk-wm831x.c @@ -350,7 +350,7 @@ static struct clk_init_data wm831x_clkout_init = { .flags = CLK_SET_RATE_PARENT, }; -static __devinit int wm831x_clk_probe(struct platform_device *pdev) +static int wm831x_clk_probe(struct platform_device *pdev) { struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); struct wm831x_clk *clkdata; -- cgit v1.2.3 From 1fc7ad5d393df9e69c0cfcb01b2d803dd2021277 Mon Sep 17 00:00:00 2001 From: Bill Pemberton Date: Mon, 19 Nov 2012 13:25:43 -0500 Subject: clk: remove use of __devexit CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton Acked-by: Mike Turquette Acked-by: Mark Brown Signed-off-by: Greg Kroah-Hartman --- drivers/clk/clk-max77686.c | 2 +- drivers/clk/clk-wm831x.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c index fe449c25efd1..d098f72e1d5f 100644 --- a/drivers/clk/clk-max77686.c +++ b/drivers/clk/clk-max77686.c @@ -199,7 +199,7 @@ out: return ret; } -static int __devexit max77686_clk_remove(struct platform_device *pdev) +static int max77686_clk_remove(struct platform_device *pdev) { struct max77686_clk **max77686_clks = platform_get_drvdata(pdev); int i; diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c index d0f1442fdae2..1b4e2281323d 100644 --- a/drivers/clk/clk-wm831x.c +++ b/drivers/clk/clk-wm831x.c @@ -399,7 +399,7 @@ err_xtal: return ret; } -static int __devexit wm831x_clk_remove(struct platform_device *pdev) +static int wm831x_clk_remove(struct platform_device *pdev) { struct wm831x_clk *clkdata = dev_get_drvdata(&pdev->dev); -- cgit v1.2.3 From 2630b17b6ee47ac79b4f5120ac49105027f644ea Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 27 Nov 2012 20:15:20 +0100 Subject: clk: ux500: fix bit error This fixes a bit error in the U8500 clock implementation: the unused p2_pclk12 registered at bit 12 in periphereral group 6 was defined as using bit 11 rather than bit 12. When walking over and disabling the unused clocks in the tree at late init time, p2_pclk12 was disabled, by effectively clearing the but for p2_pclk11 instead of bit 12 as it should have, thus disabling gpio block 6 and 7. Reported-by: Lee Jones Acked-by: Ulf Hansson Cc: Philippe Begnic Cc: stable@kernel.org Signed-off-by: Linus Walleij Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 64877e1588e4..7d0e0258f204 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -326,7 +326,7 @@ void u8500_clk_init(void) clk_register_clkdev(clk, NULL, "gpioblock1"); clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", U8500_CLKRST2_BASE, - BIT(11), 0); + BIT(12), 0); clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", U8500_CLKRST3_BASE, BIT(0), 0); -- cgit v1.2.3 From 7c045a55c97fb83a2e5e9c6c857162c4866cc602 Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Tue, 4 Dec 2012 11:00:35 -0800 Subject: clk: introduce optional disable_unused callback Some gate clocks have special needs which must be handled during the disable-unused clocks sequence. These needs might be driven by software due to the fact that we're disabling a clock outside of the normal clk_disable path and a clk's enable_count will not be accurate. On the other hand a specific hardware programming sequence might need to be followed for this corner case. This change is needed for the upcoming OMAP port to the common clock framework. Specifically, it is undesirable to treat the disable-unused path identically to the normal clk_disable path since other software layers are involved. In this case OMAP's clockdomain code throws WARNs and bails early due to the clock's enable_count being set to zero. A custom callback mitigates this problem nicely. Cc: Paul Walmsley Acked-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Mike Turquette --- drivers/clk/clk.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 9955ad7e786e..251e45d6024d 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -219,8 +219,17 @@ static void clk_disable_unused_subtree(struct clk *clk) if (clk->flags & CLK_IGNORE_UNUSED) goto unlock_out; - if (__clk_is_enabled(clk) && clk->ops->disable) - clk->ops->disable(clk->hw); + /* + * some gate clocks have special needs during the disable-unused + * sequence. call .disable_unused if available, otherwise fall + * back to .disable + */ + if (__clk_is_enabled(clk)) { + if (clk->ops->disable_unused) + clk->ops->disable_unused(clk->hw); + else if (clk->ops->disable) + clk->ops->disable(clk->hw); + } unlock_out: spin_unlock_irqrestore(&enable_lock, flags); -- cgit v1.2.3 From 0fe763c570ad2701c830b9e4e53c65ad89c11c32 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 21 Dec 2012 15:14:44 -0800 Subject: Drivers: misc: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton Signed-off-by: Greg Kroah-Hartman --- drivers/clk/clk-twl6040.c | 6 +++--- drivers/clk/ux500/abx500-clk.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-twl6040.c b/drivers/clk/clk-twl6040.c index bc1e713e7b9c..3af729b1b89d 100644 --- a/drivers/clk/clk-twl6040.c +++ b/drivers/clk/clk-twl6040.c @@ -78,7 +78,7 @@ static struct clk_init_data wm831x_clkout_init = { .flags = CLK_IS_ROOT, }; -static int __devinit twl6040_clk_probe(struct platform_device *pdev) +static int twl6040_clk_probe(struct platform_device *pdev) { struct twl6040 *twl6040 = dev_get_drvdata(pdev->dev.parent); struct twl6040_clk *clkdata; @@ -100,7 +100,7 @@ static int __devinit twl6040_clk_probe(struct platform_device *pdev) return 0; } -static int __devexit twl6040_clk_remove(struct platform_device *pdev) +static int twl6040_clk_remove(struct platform_device *pdev) { struct twl6040_clk *clkdata = dev_get_drvdata(&pdev->dev); @@ -115,7 +115,7 @@ static struct platform_driver twl6040_clk_driver = { .owner = THIS_MODULE, }, .probe = twl6040_clk_probe, - .remove = __devexit_p(twl6040_clk_remove), + .remove = twl6040_clk_remove, }; module_platform_driver(twl6040_clk_driver); diff --git a/drivers/clk/ux500/abx500-clk.c b/drivers/clk/ux500/abx500-clk.c index e27c52317ffe..9f7400d74fa7 100644 --- a/drivers/clk/ux500/abx500-clk.c +++ b/drivers/clk/ux500/abx500-clk.c @@ -34,7 +34,7 @@ static int ab9540_reg_clks(struct device *dev) return 0; } -static int __devinit abx500_clk_probe(struct platform_device *pdev) +static int abx500_clk_probe(struct platform_device *pdev) { struct ab8500 *parent = dev_get_drvdata(pdev->dev.parent); int ret; -- cgit v1.2.3 From 3810e6304185f5a5bc4bb99b0ed467a28e63e9ed Mon Sep 17 00:00:00 2001 From: Joshua Coombs Date: Sun, 6 Jan 2013 11:10:39 +0100 Subject: clk: mvebu: Remove inappropriate __init tagging If the Orion WDT driver is built as a module, an opps occurs during clk lookup when calling mvebu_clk_gating_get_src(). Remove the inappropriate __init tag so the function is available for modules after kernel init. Signed-off-by: Joshua Coombs Signed-off-by: Andrew Lunn Signed-off-by: Jason Cooper --- drivers/clk/mvebu/clk-gating-ctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/clk') diff --git a/drivers/clk/mvebu/clk-gating-ctrl.c b/drivers/clk/mvebu/clk-gating-ctrl.c index c6d3c263b070..8fa5408b6c7d 100644 --- a/drivers/clk/mvebu/clk-gating-ctrl.c +++ b/drivers/clk/mvebu/clk-gating-ctrl.c @@ -32,7 +32,7 @@ struct mvebu_soc_descr { #define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) -static struct clk __init *mvebu_clk_gating_get_src( +static struct clk *mvebu_clk_gating_get_src( struct of_phandle_args *clkspec, void *data) { struct mvebu_gating_ctrl *ctrl = (struct mvebu_gating_ctrl *)data; -- cgit v1.2.3 From d6f620a457aa4c5c2e8d1a079a1236216c445aba Mon Sep 17 00:00:00 2001 From: Cong Ding Date: Tue, 15 Jan 2013 19:44:26 +0100 Subject: clk: mvebu/clk-cpu.c: fix memory leakage the variable cpuclk and clk_name should be properly freed when error happens. Signed-off-by: Cong Ding Acked-by: Jason Cooper Acked-by: Gregory CLEMENT Acked-by: Mike Turquette Signed-off-by: Jason Cooper --- drivers/clk/mvebu/clk-cpu.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c index ff004578a119..9dd2551a0a41 100644 --- a/drivers/clk/mvebu/clk-cpu.c +++ b/drivers/clk/mvebu/clk-cpu.c @@ -124,7 +124,7 @@ void __init of_cpu_clk_setup(struct device_node *node) clks = kzalloc(ncpus * sizeof(*clks), GFP_KERNEL); if (WARN_ON(!clks)) - return; + goto clks_out; for_each_node_by_type(dn, "cpu") { struct clk_init_data init; @@ -134,11 +134,11 @@ void __init of_cpu_clk_setup(struct device_node *node) int cpu, err; if (WARN_ON(!clk_name)) - return; + goto bail_out; err = of_property_read_u32(dn, "reg", &cpu); if (WARN_ON(err)) - return; + goto bail_out; sprintf(clk_name, "cpu%d", cpu); parent_clk = of_clk_get(node, 0); @@ -167,6 +167,9 @@ void __init of_cpu_clk_setup(struct device_node *node) return; bail_out: kfree(clks); + while(ncpus--) + kfree(cpuclk[ncpus].clk_name); +clks_out: kfree(cpuclk); } -- cgit v1.2.3