From 24dc5f33ea4b504cfbd23fa159a4cacba8e4d800 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 20 Jan 2007 16:00:28 +0900 Subject: libata: update libata LLDs to use devres Update libata LLDs to use devres. Core layer is already converted to support managed LLDs. This patch simplifies initialization and fixes many resource related bugs in init failure and detach path. For example, all converted drivers now handle ata_device_add() failure gracefully without excessive resource rollback code. As most resources are released automatically on driver detach, many drivers don't need or can do with much simpler ->{port|host}_stop(). In general, stop callbacks are need iff port or host needs to be given commands to shut it down. Note that freezing is enough in many cases and ports are automatically frozen before being detached. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_legacy.c | 51 ++++++++++++----------------------------------- 1 file changed, 13 insertions(+), 38 deletions(-) (limited to 'drivers/ata/pata_legacy.c') diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 581cb33c6f45..9532b9bb6d2f 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -170,8 +170,6 @@ static struct ata_port_operations simple_port_ops = { .irq_clear = ata_bmdma_irq_clear, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; static struct ata_port_operations legacy_port_ops = { @@ -195,8 +193,6 @@ static struct ata_port_operations legacy_port_ops = { .irq_clear = ata_bmdma_irq_clear, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; /* @@ -305,8 +301,6 @@ static struct ata_port_operations pdc20230_port_ops = { .irq_clear = ata_bmdma_irq_clear, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; /* @@ -357,8 +351,6 @@ static struct ata_port_operations ht6560a_port_ops = { .irq_clear = ata_bmdma_irq_clear, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; /* @@ -420,8 +412,6 @@ static struct ata_port_operations ht6560b_port_ops = { .irq_clear = ata_bmdma_irq_clear, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; /* @@ -538,8 +528,6 @@ static struct ata_port_operations opti82c611a_port_ops = { .irq_clear = ata_bmdma_irq_clear, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; /* @@ -668,8 +656,6 @@ static struct ata_port_operations opti82c46x_port_ops = { .irq_clear = ata_bmdma_irq_clear, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; @@ -689,21 +675,19 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl struct legacy_data *ld = &legacy_data[nr_legacy_host]; struct ata_probe_ent ae; struct platform_device *pdev; - int ret = -EBUSY; struct ata_port_operations *ops = &legacy_port_ops; int pio_modes = pio_mask; u32 mask = (1 << port); - - if (request_region(io, 8, "pata_legacy") == NULL) - return -EBUSY; - if (request_region(ctrl, 1, "pata_legacy") == NULL) - goto fail_io; + int ret; pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0); - if (IS_ERR(pdev)) { - ret = PTR_ERR(pdev); - goto fail_dev; - } + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + ret = -EBUSY; + if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL || + devm_request_region(&pdev->dev, ctrl, 1, "pata_legacy") == NULL) + goto fail; if (ht6560a & mask) { ops = &ht6560a_port_ops; @@ -776,21 +760,16 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl ata_std_ports(&ae.port[0]); ae.private_data = ld; - ret = ata_device_add(&ae); - if (ret == 0) { - ret = -ENODEV; + ret = -ENODEV; + if (!ata_device_add(&ae)) goto fail; - } + legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev); ld->platform_dev = pdev; return 0; fail: platform_device_unregister(pdev); -fail_dev: - release_region(ctrl, 1); -fail_io: - release_region(io, 8); return ret; } @@ -923,15 +902,11 @@ static __exit void legacy_exit(void) for (i = 0; i < nr_legacy_host; i++) { struct legacy_data *ld = &legacy_data[i]; - struct ata_port *ap =legacy_host[i]->ports[0]; - unsigned long io = ap->ioaddr.cmd_addr; - unsigned long ctrl = ap->ioaddr.ctl_addr; - ata_host_remove(legacy_host[i]); + + ata_host_detach(legacy_host[i]); platform_device_unregister(ld->platform_dev); if (ld->timing) release_region(ld->timing, 2); - release_region(io, 8); - release_region(ctrl, 1); } } -- cgit v1.2.3 From 0d5ff566779f894ca9937231a181eb31e4adff0e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 1 Feb 2007 15:06:36 +0900 Subject: libata: convert to iomap Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik 's iomap branch. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_legacy.c | 101 +++++++++++++++++++++++++--------------------- 1 file changed, 55 insertions(+), 46 deletions(-) (limited to 'drivers/ata/pata_legacy.c') diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 9532b9bb6d2f..78b5f7136e1e 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -164,7 +164,7 @@ static struct ata_port_operations simple_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer_noirq, + .data_xfer = ata_data_xfer_noirq, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -187,7 +187,7 @@ static struct ata_port_operations legacy_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer_noirq, + .data_xfer = ata_data_xfer_noirq, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -253,31 +253,33 @@ static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsig local_irq_save(flags); /* Perform the 32bit I/O synchronization sequence */ - inb(ap->ioaddr.nsect_addr); - inb(ap->ioaddr.nsect_addr); - inb(ap->ioaddr.nsect_addr); + ioread8(ap->ioaddr.nsect_addr); + ioread8(ap->ioaddr.nsect_addr); + ioread8(ap->ioaddr.nsect_addr); /* Now the data */ if (write_data) - outsl(ap->ioaddr.data_addr, buf, buflen >> 2); + iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); else - insl(ap->ioaddr.data_addr, buf, buflen >> 2); + ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { u32 pad; if (write_data) { memcpy(&pad, buf + buflen - slop, slop); - outl(le32_to_cpu(pad), ap->ioaddr.data_addr); + pad = le32_to_cpu(pad); + iowrite32(pad, ap->ioaddr.data_addr); } else { - pad = cpu_to_le16(inl(ap->ioaddr.data_addr)); + pad = ioread32(ap->ioaddr.data_addr); + pad = cpu_to_le16(pad); memcpy(buf + buflen - slop, &pad, slop); } } local_irq_restore(flags); } else - ata_pio_data_xfer_noirq(adev, buf, buflen, write_data); + ata_data_xfer_noirq(adev, buf, buflen, write_data); } static struct ata_port_operations pdc20230_port_ops = { @@ -326,8 +328,8 @@ static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev) inb(0x3E6); inb(0x3E6); - outb(recover << 4 | active, ap->ioaddr.device_addr); - inb(ap->ioaddr.status_addr); + iowrite8(recover << 4 | active, ap->ioaddr.device_addr); + ioread8(ap->ioaddr.status_addr); } static struct ata_port_operations ht6560a_port_ops = { @@ -345,7 +347,7 @@ static struct ata_port_operations ht6560a_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, /* Check vlb/noirq */ + .data_xfer = ata_data_xfer, /* Check vlb/noirq */ .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -379,7 +381,7 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev) inb(0x3E6); inb(0x3E6); - outb(recover << 4 | active, ap->ioaddr.device_addr); + iowrite8(recover << 4 | active, ap->ioaddr.device_addr); if (adev->class != ATA_DEV_ATA) { u8 rconf = inb(0x3E6); @@ -388,7 +390,7 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev) outb(rconf, 0x3E6); } } - inb(ap->ioaddr.status_addr); + ioread8(ap->ioaddr.status_addr); } static struct ata_port_operations ht6560b_port_ops = { @@ -406,7 +408,7 @@ static struct ata_port_operations ht6560b_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, /* FIXME: Check 32bit and noirq */ + .data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */ .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -454,12 +456,12 @@ static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev u8 rc; /* Enter configuration mode */ - inw(ap->ioaddr.error_addr); - inw(ap->ioaddr.error_addr); - outb(3, ap->ioaddr.nsect_addr); + ioread16(ap->ioaddr.error_addr); + ioread16(ap->ioaddr.error_addr); + iowrite8(3, ap->ioaddr.nsect_addr); /* Read VLB clock strapping */ - clock = 1000000000 / khz[inb(ap->ioaddr.lbah_addr) & 0x03]; + clock = 1000000000 / khz[ioread8(ap->ioaddr.lbah_addr) & 0x03]; /* Get the timing data in cycles */ ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000); @@ -477,33 +479,33 @@ static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev setup = FIT(t.setup, 1, 4) - 1; /* Select the right timing bank for write timing */ - rc = inb(ap->ioaddr.lbal_addr); + rc = ioread8(ap->ioaddr.lbal_addr); rc &= 0x7F; rc |= (adev->devno << 7); - outb(rc, ap->ioaddr.lbal_addr); + iowrite8(rc, ap->ioaddr.lbal_addr); /* Write the timings */ - outb(active << 4 | recover, ap->ioaddr.error_addr); + iowrite8(active << 4 | recover, ap->ioaddr.error_addr); /* Select the right bank for read timings, also load the shared timings for address */ - rc = inb(ap->ioaddr.device_addr); + rc = ioread8(ap->ioaddr.device_addr); rc &= 0xC0; rc |= adev->devno; /* Index select */ rc |= (setup << 4) | 0x04; - outb(rc, ap->ioaddr.device_addr); + iowrite8(rc, ap->ioaddr.device_addr); /* Load the read timings */ - outb(active << 4 | recover, ap->ioaddr.data_addr); + iowrite8(active << 4 | recover, ap->ioaddr.data_addr); /* Ensure the timing register mode is right */ - rc = inb (ap->ioaddr.lbal_addr); + rc = ioread8(ap->ioaddr.lbal_addr); rc &= 0x73; rc |= 0x84; - outb(rc, ap->ioaddr.lbal_addr); + iowrite8(rc, ap->ioaddr.lbal_addr); /* Exit command mode */ - outb(0x83, ap->ioaddr.nsect_addr); + iowrite8(0x83, ap->ioaddr.nsect_addr); } @@ -522,7 +524,7 @@ static struct ata_port_operations opti82c611a_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -551,9 +553,9 @@ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev) sysclk = opti_syscfg(0xAC) & 0xC0; /* BIOS set */ /* Enter configuration mode */ - inw(ap->ioaddr.error_addr); - inw(ap->ioaddr.error_addr); - outb(3, ap->ioaddr.nsect_addr); + ioread16(ap->ioaddr.error_addr); + ioread16(ap->ioaddr.error_addr); + iowrite8(3, ap->ioaddr.nsect_addr); /* Read VLB clock strapping */ clock = 1000000000 / khz[sysclk]; @@ -574,33 +576,33 @@ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev) setup = FIT(t.setup, 1, 4) - 1; /* Select the right timing bank for write timing */ - rc = inb(ap->ioaddr.lbal_addr); + rc = ioread8(ap->ioaddr.lbal_addr); rc &= 0x7F; rc |= (adev->devno << 7); - outb(rc, ap->ioaddr.lbal_addr); + iowrite8(rc, ap->ioaddr.lbal_addr); /* Write the timings */ - outb(active << 4 | recover, ap->ioaddr.error_addr); + iowrite8(active << 4 | recover, ap->ioaddr.error_addr); /* Select the right bank for read timings, also load the shared timings for address */ - rc = inb(ap->ioaddr.device_addr); + rc = ioread8(ap->ioaddr.device_addr); rc &= 0xC0; rc |= adev->devno; /* Index select */ rc |= (setup << 4) | 0x04; - outb(rc, ap->ioaddr.device_addr); + iowrite8(rc, ap->ioaddr.device_addr); /* Load the read timings */ - outb(active << 4 | recover, ap->ioaddr.data_addr); + iowrite8(active << 4 | recover, ap->ioaddr.data_addr); /* Ensure the timing register mode is right */ - rc = inb (ap->ioaddr.lbal_addr); + rc = ioread8(ap->ioaddr.lbal_addr); rc &= 0x73; rc |= 0x84; - outb(rc, ap->ioaddr.lbal_addr); + iowrite8(rc, ap->ioaddr.lbal_addr); /* Exit command mode */ - outb(0x83, ap->ioaddr.nsect_addr); + iowrite8(0x83, ap->ioaddr.nsect_addr); /* We need to know this for quad device on the MVB */ ap->host->private_data = ap; @@ -650,7 +652,7 @@ static struct ata_port_operations opti82c46x_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = opti82c46x_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -676,6 +678,7 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl struct ata_probe_ent ae; struct platform_device *pdev; struct ata_port_operations *ops = &legacy_port_ops; + void __iomem *io_addr, *ctrl_addr; int pio_modes = pio_mask; u32 mask = (1 << port); int ret; @@ -689,6 +692,12 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl devm_request_region(&pdev->dev, ctrl, 1, "pata_legacy") == NULL) goto fail; + ret = -ENOMEM; + io_addr = devm_ioport_map(&pdev->dev, io, 8); + ctrl_addr = devm_ioport_map(&pdev->dev, ctrl, 1); + if (!io_addr || !ctrl_addr) + goto fail; + if (ht6560a & mask) { ops = &ht6560a_port_ops; pio_modes = 0x07; @@ -754,9 +763,9 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl ae.irq = irq; ae.irq_flags = 0; ae.port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST; - ae.port[0].cmd_addr = io; - ae.port[0].altstatus_addr = ctrl; - ae.port[0].ctl_addr = ctrl; + ae.port[0].cmd_addr = io_addr; + ae.port[0].altstatus_addr = ctrl_addr; + ae.port[0].ctl_addr = ctrl_addr; ata_std_ports(&ae.port[0]); ae.private_data = ld; -- cgit v1.2.3 From 246ce3b675843e0369643cceb4faeb6cf6d19a30 Mon Sep 17 00:00:00 2001 From: Akira Iguchi Date: Fri, 26 Jan 2007 16:27:58 +0900 Subject: libata: add another IRQ calls (libata drivers) This patch is against each libata driver. Two IRQ calls are added in ata_port_operations. - irq_on() is used to enable interrupts. - irq_ack() is used to acknowledge a device interrupt. In most drivers, ata_irq_on() and ata_irq_ack() are used for irq_on and irq_ack respectively. In some drivers (ex: ahci, sata_sil24) which cannot use them as is, ata_dummy_irq_on() and ata_dummy_irq_ack() are used. Signed-off-by: Kou Ishizaki Signed-off-by: Akira Iguchi Signed-off-by: Jeff Garzik --- drivers/ata/pata_legacy.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers/ata/pata_legacy.c') diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 78b5f7136e1e..4223e10de6a0 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -168,6 +168,8 @@ static struct ata_port_operations simple_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; @@ -191,6 +193,8 @@ static struct ata_port_operations legacy_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; @@ -301,6 +305,8 @@ static struct ata_port_operations pdc20230_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; @@ -351,6 +357,8 @@ static struct ata_port_operations ht6560a_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; @@ -412,6 +420,8 @@ static struct ata_port_operations ht6560b_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; @@ -528,6 +538,8 @@ static struct ata_port_operations opti82c611a_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; @@ -656,6 +668,8 @@ static struct ata_port_operations opti82c46x_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; -- cgit v1.2.3