From 9a4da8a5b109906a64bed5aaeb83bf4edb1f5888 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Thu, 29 Nov 2012 13:05:05 +0100 Subject: s390/pci: PCI adapter interrupts for MSI/MSI-X Support PCI adapter interrupts using the Single-IRQ-mode. Single-IRQ-mode disables an adapter IRQ automatically after delivering it until the SIC instruction enables it again. This is used to reduce the number of IRQs for streaming workloads. Up to 64 MSI handlers can be registered per PCI function. A hash table is used to map interrupt numbers to MSI descriptors. The interrupt vector is scanned using the flogr instruction. Only MSI/MSI-X interrupts are supported, no legacy INTs. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/irq.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/s390/kernel/irq.c') diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index 6cdc55b26d68..bf24293970ce 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -58,6 +58,8 @@ static const struct irq_class intrclass_names[] = { [IOINT_APB] = {.name = "APB", .desc = "[I/O] AP Bus"}, [IOINT_ADM] = {.name = "ADM", .desc = "[I/O] EADM Subchannel"}, [IOINT_CSC] = {.name = "CSC", .desc = "[I/O] CHSC Subchannel"}, + [IOINT_PCI] = {.name = "PCI", .desc = "[I/O] PCI Interrupt" }, + [IOINT_MSI] = {.name = "MSI", .desc = "[I/O] MSI Interrupt" }, [NMI_NMI] = {.name = "NMI", .desc = "[NMI] Machine Check"}, }; -- cgit v1.2.3 From add9bde216fefe1b65b41f7c0948cef48aa98c14 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 2 Jan 2013 14:01:23 +0100 Subject: s390/irq: enable irq sum accounting for /proc/stat again For more than two years, since f2c66cd8eeddedb440f33bc0f5cec1ed7ae376cb "/proc/stat: scalability of irq num per cpu" the output of /proc/stat is broken. The first field in the "intr" line should contain the sum of all interrupts, however since the above mentioned change it is always zero. The reason for that is that a per cpu irq sum variable had been introduced which got incremented when calling kstat_incr_irqs_this_cpu(). However on s390 we directly incremented only the per cpu per irq counter by accessing the array element via kstat_cpu(smp_processor_id()).irqs[...]. So fix this and use the kstat_incr_irqs_this_cpu() wrapper which increments both: the per cpu per irq counter and the per cpu irq sum counter. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/s390/kernel/irq.c') diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index bf24293970ce..a8f8ab027ba8 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -222,7 +222,7 @@ void __irq_entry do_extint(struct pt_regs *regs, struct ext_code ext_code, /* Serve timer interrupts first. */ clock_comparator_work(); } - kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++; + kstat_incr_irqs_this_cpu(EXTERNAL_INTERRUPT, NULL); if (ext_code.code != 0x1004) __get_cpu_var(s390_idle).nohz_delay = 1; -- cgit v1.2.3 From 420f42ecf48a926ba775ec7d7294425f004b6ade Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 2 Jan 2013 15:18:18 +0100 Subject: s390/irq: remove split irq fields from /proc/stat Now that irq sum accounting for /proc/stat's "intr" line works again we have the oddity that the sum field (first field) contains only the sum of the second (external irqs) and third field (I/O interrupts). The reason for that is that these two fields are already sums of all other fields. So if we would sum up everything we would count every interrupt twice. This is broken since the split interrupt accounting was merged two years ago: 052ff461c8427629aee887ccc27478fc7373237c "[S390] irq: have detailed statistics for interrupt types". To fix this remove the split interrupt fields from /proc/stat's "intr" line again and only have them in /proc/interrupts. This restores the old behaviour, seems to be the only sane fix and mimics a behaviour from other architectures where /proc/interrupts also contains more than /proc/stat's "intr" line does. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/irq.c | 121 +++++++++++++++++++++++++++++-------------------- 1 file changed, 73 insertions(+), 48 deletions(-) (limited to 'arch/s390/kernel/irq.c') diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index a8f8ab027ba8..5f5462447aff 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -24,42 +24,63 @@ #include #include "entry.h" +DEFINE_PER_CPU_SHARED_ALIGNED(struct irq_stat, irq_stat); +EXPORT_PER_CPU_SYMBOL_GPL(irq_stat); + struct irq_class { char *name; char *desc; }; -static const struct irq_class intrclass_names[] = { +/* + * The list of "main" irq classes on s390. This is the list of interrrupts + * that appear both in /proc/stat ("intr" line) and /proc/interrupts. + * Historically only external and I/O interrupts have been part of /proc/stat. + * We can't add the split external and I/O sub classes since the first field + * in the "intr" line in /proc/stat is supposed to be the sum of all other + * fields. + * Since the external and I/O interrupt fields are already sums we would end + * up with having a sum which accounts each interrupt twice. + */ +static const struct irq_class irqclass_main_desc[NR_IRQS] = { [EXTERNAL_INTERRUPT] = {.name = "EXT"}, - [IO_INTERRUPT] = {.name = "I/O"}, - [EXTINT_CLK] = {.name = "CLK", .desc = "[EXT] Clock Comparator"}, - [EXTINT_EXC] = {.name = "EXC", .desc = "[EXT] External Call"}, - [EXTINT_EMS] = {.name = "EMS", .desc = "[EXT] Emergency Signal"}, - [EXTINT_TMR] = {.name = "TMR", .desc = "[EXT] CPU Timer"}, - [EXTINT_TLA] = {.name = "TAL", .desc = "[EXT] Timing Alert"}, - [EXTINT_PFL] = {.name = "PFL", .desc = "[EXT] Pseudo Page Fault"}, - [EXTINT_DSD] = {.name = "DSD", .desc = "[EXT] DASD Diag"}, - [EXTINT_VRT] = {.name = "VRT", .desc = "[EXT] Virtio"}, - [EXTINT_SCP] = {.name = "SCP", .desc = "[EXT] Service Call"}, - [EXTINT_IUC] = {.name = "IUC", .desc = "[EXT] IUCV"}, - [EXTINT_CMS] = {.name = "CMS", .desc = "[EXT] CPU-Measurement: Sampling"}, - [EXTINT_CMC] = {.name = "CMC", .desc = "[EXT] CPU-Measurement: Counter"}, - [EXTINT_CMR] = {.name = "CMR", .desc = "[EXT] CPU-Measurement: RI"}, - [IOINT_CIO] = {.name = "CIO", .desc = "[I/O] Common I/O Layer Interrupt"}, - [IOINT_QAI] = {.name = "QAI", .desc = "[I/O] QDIO Adapter Interrupt"}, - [IOINT_DAS] = {.name = "DAS", .desc = "[I/O] DASD"}, - [IOINT_C15] = {.name = "C15", .desc = "[I/O] 3215"}, - [IOINT_C70] = {.name = "C70", .desc = "[I/O] 3270"}, - [IOINT_TAP] = {.name = "TAP", .desc = "[I/O] Tape"}, - [IOINT_VMR] = {.name = "VMR", .desc = "[I/O] Unit Record Devices"}, - [IOINT_LCS] = {.name = "LCS", .desc = "[I/O] LCS"}, - [IOINT_CLW] = {.name = "CLW", .desc = "[I/O] CLAW"}, - [IOINT_CTC] = {.name = "CTC", .desc = "[I/O] CTC"}, - [IOINT_APB] = {.name = "APB", .desc = "[I/O] AP Bus"}, - [IOINT_ADM] = {.name = "ADM", .desc = "[I/O] EADM Subchannel"}, - [IOINT_CSC] = {.name = "CSC", .desc = "[I/O] CHSC Subchannel"}, - [IOINT_PCI] = {.name = "PCI", .desc = "[I/O] PCI Interrupt" }, - [IOINT_MSI] = {.name = "MSI", .desc = "[I/O] MSI Interrupt" }, + [IO_INTERRUPT] = {.name = "I/O"} +}; + +/* + * The list of split external and I/O interrupts that appear only in + * /proc/interrupts. + * In addition this list contains non external / I/O events like NMIs. + */ +static const struct irq_class irqclass_sub_desc[NR_ARCH_IRQS] = { + [IRQEXT_CLK] = {.name = "CLK", .desc = "[EXT] Clock Comparator"}, + [IRQEXT_EXC] = {.name = "EXC", .desc = "[EXT] External Call"}, + [IRQEXT_EMS] = {.name = "EMS", .desc = "[EXT] Emergency Signal"}, + [IRQEXT_TMR] = {.name = "TMR", .desc = "[EXT] CPU Timer"}, + [IRQEXT_TLA] = {.name = "TAL", .desc = "[EXT] Timing Alert"}, + [IRQEXT_PFL] = {.name = "PFL", .desc = "[EXT] Pseudo Page Fault"}, + [IRQEXT_DSD] = {.name = "DSD", .desc = "[EXT] DASD Diag"}, + [IRQEXT_VRT] = {.name = "VRT", .desc = "[EXT] Virtio"}, + [IRQEXT_SCP] = {.name = "SCP", .desc = "[EXT] Service Call"}, + [IRQEXT_IUC] = {.name = "IUC", .desc = "[EXT] IUCV"}, + [IRQEXT_CMS] = {.name = "CMS", .desc = "[EXT] CPU-Measurement: Sampling"}, + [IRQEXT_CMC] = {.name = "CMC", .desc = "[EXT] CPU-Measurement: Counter"}, + [IRQEXT_CMR] = {.name = "CMR", .desc = "[EXT] CPU-Measurement: RI"}, + [IRQIO_CIO] = {.name = "CIO", .desc = "[I/O] Common I/O Layer Interrupt"}, + [IRQIO_QAI] = {.name = "QAI", .desc = "[I/O] QDIO Adapter Interrupt"}, + [IRQIO_DAS] = {.name = "DAS", .desc = "[I/O] DASD"}, + [IRQIO_C15] = {.name = "C15", .desc = "[I/O] 3215"}, + [IRQIO_C70] = {.name = "C70", .desc = "[I/O] 3270"}, + [IRQIO_TAP] = {.name = "TAP", .desc = "[I/O] Tape"}, + [IRQIO_VMR] = {.name = "VMR", .desc = "[I/O] Unit Record Devices"}, + [IRQIO_LCS] = {.name = "LCS", .desc = "[I/O] LCS"}, + [IRQIO_CLW] = {.name = "CLW", .desc = "[I/O] CLAW"}, + [IRQIO_CTC] = {.name = "CTC", .desc = "[I/O] CTC"}, + [IRQIO_APB] = {.name = "APB", .desc = "[I/O] AP Bus"}, + [IRQIO_ADM] = {.name = "ADM", .desc = "[I/O] EADM Subchannel"}, + [IRQIO_CSC] = {.name = "CSC", .desc = "[I/O] CHSC Subchannel"}, + [IRQIO_PCI] = {.name = "PCI", .desc = "[I/O] PCI Interrupt" }, + [IRQIO_MSI] = {.name = "MSI", .desc = "[I/O] MSI Interrupt" }, [NMI_NMI] = {.name = "NMI", .desc = "[NMI] Machine Check"}, }; @@ -68,30 +89,34 @@ static const struct irq_class intrclass_names[] = { */ int show_interrupts(struct seq_file *p, void *v) { - int i = *(loff_t *) v, j; + int irq = *(loff_t *) v; + int cpu; get_online_cpus(); - if (i == 0) { + if (irq == 0) { seq_puts(p, " "); - for_each_online_cpu(j) - seq_printf(p, "CPU%d ",j); + for_each_online_cpu(cpu) + seq_printf(p, "CPU%d ", cpu); seq_putc(p, '\n'); } - - if (i < NR_IRQS) { - seq_printf(p, "%s: ", intrclass_names[i].name); -#ifndef CONFIG_SMP - seq_printf(p, "%10u ", kstat_irqs(i)); -#else - for_each_online_cpu(j) - seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); -#endif - if (intrclass_names[i].desc) - seq_printf(p, " %s", intrclass_names[i].desc); - seq_putc(p, '\n'); - } + if (irq < NR_IRQS) { + seq_printf(p, "%s: ", irqclass_main_desc[irq].name); + for_each_online_cpu(cpu) + seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[irq]); + seq_putc(p, '\n'); + goto skip_arch_irqs; + } + for (irq = 0; irq < NR_ARCH_IRQS; irq++) { + seq_printf(p, "%s: ", irqclass_sub_desc[irq].name); + for_each_online_cpu(cpu) + seq_printf(p, "%10u ", per_cpu(irq_stat, cpu).irqs[irq]); + if (irqclass_sub_desc[irq].desc) + seq_printf(p, " %s", irqclass_sub_desc[irq].desc); + seq_putc(p, '\n'); + } +skip_arch_irqs: put_online_cpus(); - return 0; + return 0; } /* -- cgit v1.2.3 From 93f3b2ee0abff5438e74cc90cf816429248cc8eb Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 2 Jan 2013 16:54:12 +0100 Subject: s390/irq: count cpu restart events Count CPU Restart events and make them visible via /proc/interrupts. Every CPU hotplug (online) event will increase the per cpu counter. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/irq.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/s390/kernel/irq.c') diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index 5f5462447aff..9df824ea1667 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -82,6 +82,7 @@ static const struct irq_class irqclass_sub_desc[NR_ARCH_IRQS] = { [IRQIO_PCI] = {.name = "PCI", .desc = "[I/O] PCI Interrupt" }, [IRQIO_MSI] = {.name = "MSI", .desc = "[I/O] MSI Interrupt" }, [NMI_NMI] = {.name = "NMI", .desc = "[NMI] Machine Check"}, + [CPU_RST] = {.name = "RST", .desc = "[CPU] CPU Restart"}, }; /* -- cgit v1.2.3