From ad3b6993b9c5482e8a2ec5aed181538c921fdcbd Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 15 Nov 2010 09:42:08 +0000 Subject: ARM: SMP: pass an ipi number to smp_cross_call() This allows us to use smp_cross_call() to trigger a number of different software generated interrupts, rather than combining them all on one SGI. Recover the SGI number via do_IPI. Reviewed-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-ux500/include/mach/smp.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h index 197e8417375e..bd57c50a5b86 100644 --- a/arch/arm/mach-ux500/include/mach/smp.h +++ b/arch/arm/mach-ux500/include/mach/smp.h @@ -18,8 +18,8 @@ extern void u8500_secondary_startup(void); /* * We use IRQ1 as the IPI */ -static inline void smp_cross_call(const struct cpumask *mask) +static inline void smp_cross_call(const struct cpumask *mask, int ipi) { - gic_raise_softirq(mask, 1); + gic_raise_softirq(mask, ipi); } #endif -- cgit v1.2.3 From 5488324a6cbae617d103c42944827d82d8f5efd4 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 16 Nov 2010 01:02:06 +0100 Subject: ARM: 6479/1: Use shared GIC entry macros on UX500 Use the GIC demux code in asm/hardware/entry-macro-gic.S on the UX500 subarchitecture. Signed-off-by: Magnus Damm Signed-off-by: Russell King --- arch/arm/mach-ux500/include/mach/entry-macro.S | 67 +------------------------- 1 file changed, 1 insertion(+), 66 deletions(-) (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S index 60ea88db8283..3cc3cdf55180 100644 --- a/arch/arm/mach-ux500/include/mach/entry-macro.S +++ b/arch/arm/mach-ux500/include/mach/entry-macro.S @@ -11,7 +11,7 @@ * warranty of any kind, whether express or implied. */ #include -#include +#include .macro disable_fiq .endm @@ -22,68 +22,3 @@ .macro arch_ret_to_user, tmp1, tmp2 .endm - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an - * interrupt if it's between 30 and 1020. The test_for_ipi - * routine below will pick up on IPIs. - * - * A simple read from the controller will tell us the number - * of the highest priority enabled interrupt. We then just - * need to check whether it is in the valid range for an - * IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - /* bits 12-10 = src CPU, 9-0 = int # */ - ldr \irqstat, [\base, #GIC_CPU_INTACK] - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #29 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - - .endm - - /* We assume that irqstat (the raw value of the IRQ - * acknowledge register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of - * interrupt on the controller, since this requires the - * original irqstat value which we won't easily be able - * to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm - - /* As above, this assumes that irqstat and base - * are preserved.. - */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm -- cgit v1.2.3 From b8410a150fbc4e61a28032637dc0ae7e8609131d Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Mon, 9 Aug 2010 19:18:17 +0530 Subject: ux500: mop500: add TC35892 and MicroSD slot support Acked-by: Linus Walleij Signed-off-by: Rabin Vincent Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/irqs-board-mop500.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index cca4f705601e..7ee8aaae66a4 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -13,7 +13,19 @@ #define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START #define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \ + AB8500_NR_IRQS) -#define MOP500_IRQ_END MOP500_AB8500_IRQ_END + +#define TC35892_NR_INTERNAL_IRQS 8 +#define TC35892_INT_GPIO(x) (TC35892_NR_INTERNAL_IRQS + (x)) +#define TC35892_NR_GPIOS 24 +#define TC35892_NR_IRQS TC35892_INT_GPIO(TC35892_NR_GPIOS) + +#define MOP500_EGPIO_NR_IRQS TC35892_NR_IRQS + +#define MOP500_EGPIO_IRQ_BASE MOP500_AB8500_IRQ_END +#define MOP500_EGPIO_IRQ_END (MOP500_EGPIO_IRQ_BASE \ + + MOP500_EGPIO_NR_IRQS) + +#define MOP500_IRQ_END MOP500_EGPIO_IRQ_END #if MOP500_IRQ_END > IRQ_BOARD_END #undef IRQ_BOARD_END -- cgit v1.2.3 From fbf1eadf950da1f5f5ed2e454d2f191f90fe1ebe Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Wed, 29 Sep 2010 19:46:32 +0530 Subject: ux500: rework device registration Change the Ux500 devices to be dynamically allocated and added by calling functions instead of referencing structures, thereby allowing 5500 and other derivatives' support to be added without having to duplicate structures, use fixup functions, or use compile-time macros. Signed-off-by: Rabin Vincent Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/devices.h | 17 ----------------- arch/arm/mach-ux500/include/mach/setup.h | 2 +- 2 files changed, 1 insertion(+), 18 deletions(-) (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h index b91a4d1211a2..020b6369a30a 100644 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ b/arch/arm/mach-ux500/include/mach/devices.h @@ -14,27 +14,10 @@ extern struct platform_device u5500_gpio_devs[]; extern struct platform_device u8500_gpio_devs[]; extern struct amba_device ux500_pl031_device; -extern struct amba_device u8500_ssp0_device; -extern struct amba_device ux500_uart0_device; -extern struct amba_device ux500_uart1_device; -extern struct amba_device ux500_uart2_device; -extern struct platform_device ux500_i2c1_device; -extern struct platform_device ux500_i2c2_device; -extern struct platform_device ux500_i2c3_device; - -extern struct platform_device u8500_i2c0_device; -extern struct platform_device u8500_i2c4_device; extern struct platform_device u8500_dma40_device; extern struct platform_device ux500_ske_keypad_device; -extern struct amba_device u8500_sdi0_device; -extern struct amba_device u8500_sdi1_device; -extern struct amba_device u8500_sdi2_device; -extern struct amba_device u8500_sdi3_device; -extern struct amba_device u8500_sdi4_device; -extern struct amba_device u8500_sdi5_device; - void dma40_u8500ed_fixup(void); #endif diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 54bbe648bf58..322a1c1f2bae 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -18,7 +18,6 @@ extern void __init ux500_map_io(void); extern void __init u5500_map_io(void); extern void __init u8500_map_io(void); -extern void __init ux500_init_devices(void); extern void __init u5500_init_devices(void); extern void __init u8500_init_devices(void); @@ -26,6 +25,7 @@ extern void __init ux500_init_irq(void); /* We re-use nomadik_timer for this platform */ extern void nmdk_timer_init(void); +struct amba_device; extern void __init amba_add_devices(struct amba_device *devs[], int num); struct sys_timer; -- cgit v1.2.3 From fcbd458e95316fe5031f1b8eaf5e66ce8f3c3146 Mon Sep 17 00:00:00 2001 From: Mattias Wallin Date: Thu, 2 Dec 2010 16:20:42 +0100 Subject: ARM: ux500: prcmu db8500 v2 support This patch adds support for db8500 chip version 2. The TCDM memory address of the PRCMU is changed and dynamic detection of that is added. Signed-off-by: Mattias Wallin Acked-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/db8500-regs.h | 3 ++- arch/arm/mach-ux500/include/mach/prcmu.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index f07d0986409d..0fefb34c11e4 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -92,7 +92,8 @@ #define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000) #define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) -#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x0f000) +#define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000) +#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) /* per3 base addresses */ #define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h index 549843ff6dbe..daa9d3ab7e0c 100644 --- a/arch/arm/mach-ux500/include/mach/prcmu.h +++ b/arch/arm/mach-ux500/include/mach/prcmu.h @@ -9,6 +9,7 @@ #ifndef __MACH_PRCMU_H #define __MACH_PRCMU_H +void __init prcmu_early_init(void); int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); -- cgit v1.2.3 From a5de3dc240eb4e58f02b199ed529c17b65f9adfb Mon Sep 17 00:00:00 2001 From: Mattias Wallin Date: Thu, 2 Dec 2010 13:46:00 +0100 Subject: mach-ux500: AB8500 irqs is taken from header file This patch removes the dublicated define for number of interrupts and instead include the needed header file. Signed-off-by: Mattias Wallin Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/irqs-board-mop500.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index 7ee8aaae66a4..4a91bbdb973e 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -8,7 +8,8 @@ #ifndef __MACH_IRQS_BOARD_MOP500_H #define __MACH_IRQS_BOARD_MOP500_H -#define AB8500_NR_IRQS 104 +/* Number of AB8500 irqs is taken from header file */ +#include #define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START #define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \ -- cgit v1.2.3 From bab263e0ce624b05bdcf568e83a9ca4ce71f5e3d Mon Sep 17 00:00:00 2001 From: Per Forlin Date: Sun, 5 Dec 2010 12:49:03 +0100 Subject: ux500: Add eMMC support in U5500. U5500 now boots from sdi0 (onboard eMMC). Change machine type to U5500. Adjust uart and sdi0 clock rates for u5500. All necessary clocks must be enabled before Linux starts because there is no clock tree support in u5500 yet. Signed-off-by: Per Forlin Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/setup.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 322a1c1f2bae..22788a7d35dc 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -22,6 +22,9 @@ extern void __init u5500_init_devices(void); extern void __init u8500_init_devices(void); extern void __init ux500_init_irq(void); + +extern void __init u5500_sdi_init(void); + /* We re-use nomadik_timer for this platform */ extern void nmdk_timer_init(void); -- cgit v1.2.3 From e8b1cc3a341684dfc02fd02f52308752b031668c Mon Sep 17 00:00:00 2001 From: Per Forlin Date: Sun, 5 Dec 2010 13:35:12 +0100 Subject: ux500: Add DMA support for U5500 Add basic DMA configuration for u5500 supporting memcpy. Make way for SDI0 dma support by setting SDI0 to -1, indicating it will be configured in runtime. Signed-off-by: Per Forlin Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/db5500-regs.h | 4 ++++ arch/arm/mach-ux500/include/mach/setup.h | 2 ++ 2 files changed, 6 insertions(+) (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h index 3eafc0e24ba5..bd88c1e74060 100644 --- a/arch/arm/mach-ux500/include/mach/db5500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h @@ -114,4 +114,8 @@ #define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20) #define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F) +#define U5500_ESRAM_BASE 0x40000000 +#define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000 +#define U5500_DMA_LCPA_BASE (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET) + #endif diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 22788a7d35dc..469877e0de90 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -25,6 +25,8 @@ extern void __init ux500_init_irq(void); extern void __init u5500_sdi_init(void); +extern void __init db5500_dma_init(void); + /* We re-use nomadik_timer for this platform */ extern void nmdk_timer_init(void); -- cgit v1.2.3 From ec4a637d35d4e05d1f43a68d647fb2453891379a Mon Sep 17 00:00:00 2001 From: Carl-Johan Irekvist Date: Wed, 8 Dec 2010 11:07:53 +0530 Subject: ux500: fix uncompressor UART address for U5500 The uncompress code for zImage uses the UART to print status messages, this was hard coded to use UART2 for the U8500 platform. This patch checks at run time which platform it is run on. U5500 uses UART0 as console UART. Signed-off-by: Carl-Johan Irekvist Signed-off-by: Rabin Vincent Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/uncompress.h | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index 0271ca0a83df..9a6614c6808e 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -19,38 +19,43 @@ #define __ASM_ARCH_UNCOMPRESS_H #include +#include #include +#include #include -#define U8500_UART_DR 0x80007000 -#define U8500_UART_LCRH 0x8000702c -#define U8500_UART_CR 0x80007030 -#define U8500_UART_FR 0x80007018 +static u32 ux500_uart_base; static void putc(const char c) { /* Do nothing if the UART is not enabled. */ - if (!(__raw_readb(U8500_UART_CR) & 0x1)) + if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1)) return; if (c == '\n') putc('\r'); - while (__raw_readb(U8500_UART_FR) & (1 << 5)) + while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 5)) barrier(); - __raw_writeb(c, U8500_UART_DR); + __raw_writeb(c, ux500_uart_base + UART01x_DR); } static void flush(void) { - if (!(__raw_readb(U8500_UART_CR) & 0x1)) + if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1)) return; - while (__raw_readb(U8500_UART_FR) & (1 << 3)) + while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 3)) barrier(); } static inline void arch_decomp_setup(void) { + if (machine_is_u8500()) + ux500_uart_base = U8500_UART2_BASE; + else if (machine_is_u5500()) + ux500_uart_base = U5500_UART0_BASE; + else /* not much can be done to help here */ + ux500_uart_base = U8500_UART2_BASE; } #define arch_decomp_wdog() /* nothing to do here */ -- cgit v1.2.3 From 01afdd1353ca83904f430be4f6202d1a20912f4d Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Wed, 8 Dec 2010 11:07:55 +0530 Subject: ux500: rework gpio registration Rework gpio registration to remove build-time changing macros. Signed-off-by: Rabin Vincent Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/gpio.h | 38 ----------------------------- arch/arm/mach-ux500/include/mach/hardware.h | 2 ++ 2 files changed, 2 insertions(+), 38 deletions(-) (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h index d548a622e7d2..3c4cd31ad9f7 100644 --- a/arch/arm/mach-ux500/include/mach/gpio.h +++ b/arch/arm/mach-ux500/include/mach/gpio.h @@ -9,42 +9,4 @@ #include -#define __GPIO_RESOURCE(soc, block) \ - { \ - .start = soc##_GPIOBANK##block##_BASE, \ - .end = soc##_GPIOBANK##block##_BASE + 127, \ - .flags = IORESOURCE_MEM, \ - }, \ - { \ - .start = IRQ_GPIO##block, \ - .end = IRQ_GPIO##block, \ - .flags = IORESOURCE_IRQ, \ - } - -#define __GPIO_DEVICE(soc, block) \ - { \ - .name = "gpio", \ - .id = block, \ - .num_resources = 2, \ - .resource = &soc##_gpio_resources[block * 2], \ - .dev = { \ - .platform_data = &soc##_gpio_data[block], \ - }, \ - } - -#define GPIO_DATA(_name, first) \ - { \ - .name = _name, \ - .first_gpio = first, \ - .first_irq = NOMADIK_GPIO_TO_IRQ(first), \ - } - -#ifdef CONFIG_UX500_SOC_DB8500 -#define GPIO_RESOURCE(block) __GPIO_RESOURCE(U8500, block) -#define GPIO_DEVICE(block) __GPIO_DEVICE(u8500, block) -#elif defined(CONFIG_UX500_SOC_DB5500) -#define GPIO_RESOURCE(block) __GPIO_RESOURCE(U5500, block) -#define GPIO_DEVICE(block) __GPIO_DEVICE(u5500, block) -#endif - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 32e883a8f2a2..6295cc581355 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -142,6 +142,8 @@ static inline bool cpu_is_u5500(void) #endif } +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + #endif #endif /* __MACH_HARDWARE_H */ -- cgit v1.2.3 From 22039b7cc54a636f80434e9b149fcdec148c4cb9 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Wed, 8 Dec 2010 11:07:56 +0530 Subject: ux500: remove ambiguous irq macros Remove the irq number macros which don't specify which SoC they're for. Signed-off-by: Rabin Vincent Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/irqs.h | 44 --------------------------------- 1 file changed, 44 deletions(-) (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index 693aa57de88d..880ae45bc235 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -21,50 +21,6 @@ /* Interrupt numbers generic for shared peripheral */ #define IRQ_MTU0 (IRQ_SHPI_START + 4) -#define IRQ_SPI2 (IRQ_SHPI_START + 6) -#define IRQ_SPI0 (IRQ_SHPI_START + 8) -#define IRQ_UART0 (IRQ_SHPI_START + 11) -#define IRQ_I2C3 (IRQ_SHPI_START + 12) -#define IRQ_SSP0 (IRQ_SHPI_START + 14) -#define IRQ_MTU1 (IRQ_SHPI_START + 17) -#define IRQ_RTC_RTT (IRQ_SHPI_START + 18) -#define IRQ_UART1 (IRQ_SHPI_START + 19) -#define IRQ_I2C0 (IRQ_SHPI_START + 21) -#define IRQ_I2C1 (IRQ_SHPI_START + 22) -#define IRQ_USBOTG (IRQ_SHPI_START + 23) -#define IRQ_DMA (IRQ_SHPI_START + 25) -#define IRQ_UART2 (IRQ_SHPI_START + 26) -#define IRQ_HSIR_EXCEP (IRQ_SHPI_START + 29) -#define IRQ_MSP0 (IRQ_SHPI_START + 31) -#define IRQ_HSIR_CH0_OVRRUN (IRQ_SHPI_START + 32) -#define IRQ_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33) -#define IRQ_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34) -#define IRQ_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35) -#define IRQ_AB8500 (IRQ_SHPI_START + 40) -#define IRQ_PRCMU (IRQ_SHPI_START + 47) -#define IRQ_DISP (IRQ_SHPI_START + 48) -#define IRQ_SiPI3 (IRQ_SHPI_START + 49) -#define IRQ_I2C4 (IRQ_SHPI_START + 51) -#define IRQ_SSP1 (IRQ_SHPI_START + 52) -#define IRQ_I2C2 (IRQ_SHPI_START + 55) -#define IRQ_SDMMC0 (IRQ_SHPI_START + 60) -#define IRQ_MSP1 (IRQ_SHPI_START + 62) -#define IRQ_SPI1 (IRQ_SHPI_START + 96) -#define IRQ_MSP2 (IRQ_SHPI_START + 98) -#define IRQ_SDMMC4 (IRQ_SHPI_START + 99) -#define IRQ_HSIRD0 (IRQ_SHPI_START + 104) -#define IRQ_HSIRD1 (IRQ_SHPI_START + 105) -#define IRQ_HSITD0 (IRQ_SHPI_START + 106) -#define IRQ_HSITD1 (IRQ_SHPI_START + 107) -#define IRQ_GPIO0 (IRQ_SHPI_START + 119) -#define IRQ_GPIO1 (IRQ_SHPI_START + 120) -#define IRQ_GPIO2 (IRQ_SHPI_START + 121) -#define IRQ_GPIO3 (IRQ_SHPI_START + 122) -#define IRQ_GPIO4 (IRQ_SHPI_START + 123) -#define IRQ_GPIO5 (IRQ_SHPI_START + 124) -#define IRQ_GPIO6 (IRQ_SHPI_START + 125) -#define IRQ_GPIO7 (IRQ_SHPI_START + 126) -#define IRQ_GPIO8 (IRQ_SHPI_START + 127) /* There are 128 shared peripheral interrupts assigned to * INTID[160:32]. The first 32 interrupts are reserved. -- cgit v1.2.3 From e0befb23dfed4d4d0de9d97dac936ccc0bbec093 Mon Sep 17 00:00:00 2001 From: Martin Persson Date: Wed, 8 Dec 2010 15:13:28 +0100 Subject: ux500: Add prcmu support for operating points Adds support in PRCMU driver to handle CPU and APE operating points. Signed-off-by: Martin Persson Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/prcmu-defs.h | 30 +++++++++++++++++++++++++++ arch/arm/mach-ux500/include/mach/prcmu-regs.h | 15 +++++++++----- arch/arm/mach-ux500/include/mach/prcmu.h | 14 ++++++++++++- 3 files changed, 53 insertions(+), 6 deletions(-) create mode 100644 arch/arm/mach-ux500/include/mach/prcmu-defs.h (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/prcmu-defs.h b/arch/arm/mach-ux500/include/mach/prcmu-defs.h new file mode 100644 index 000000000000..848ba64b561f --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/prcmu-defs.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Sundar Iyer + * Author: Martin Persson + * + * License Terms: GNU General Public License v2 + * + * PRCM Unit definitions + */ + +#ifndef __MACH_PRCMU_DEFS_H +#define __MACH_PRCMU_DEFS_H + +enum prcmu_cpu_opp { + CPU_OPP_INIT = 0x00, + CPU_OPP_NO_CHANGE = 0x01, + CPU_OPP_100 = 0x02, + CPU_OPP_50 = 0x03, + CPU_OPP_MAX = 0x04, + CPU_OPP_EXT_CLK = 0x07 +}; +enum prcmu_ape_opp { + APE_OPP_NO_CHANGE = 0x00, + APE_OPP_100 = 0x02, + APE_OPP_50 = 0x03, +}; + +#endif /* __MACH_PRCMU_DEFS_H */ diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h index 8885f39a6421..455467e88791 100644 --- a/arch/arm/mach-ux500/include/mach/prcmu-regs.h +++ b/arch/arm/mach-ux500/include/mach/prcmu-regs.h @@ -1,10 +1,15 @@ /* - * Copyright (c) 2009 ST-Ericsson SA + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. + * Author: Kumar Sanghvi + * Author: Sundar Iyer + * + * License Terms: GNU General Public License v2 + * + * PRCM Unit registers */ + #ifndef __MACH_PRCMU_REGS_H #define __MACH_PRCMU_REGS_H @@ -88,4 +93,4 @@ /* Miscellaneous unit registers */ #define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324) -#endif /* __MACH_PRCMU__REGS_H */ +#endif /* __MACH_PRCMU_REGS_H */ diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h index daa9d3ab7e0c..c49e456162ef 100644 --- a/arch/arm/mach-ux500/include/mach/prcmu.h +++ b/arch/arm/mach-ux500/include/mach/prcmu.h @@ -2,15 +2,27 @@ * Copyright (C) STMicroelectronics 2009 * Copyright (C) ST-Ericsson SA 2010 * + * Author: Kumar Sanghvi + * Author: Sundar Iyer + * Author: Mattias Nilsson + * * License Terms: GNU General Public License v2 * - * PRCMU f/w APIs + * PRCM Unit f/w API */ #ifndef __MACH_PRCMU_H #define __MACH_PRCMU_H +#include void __init prcmu_early_init(void); int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); +int prcmu_set_ape_opp(enum prcmu_ape_opp opp); +int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp); +int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp, + enum prcmu_cpu_opp cpu_opp); +int prcmu_get_ape_opp(void); +int prcmu_get_cpu_opp(void); +bool prcmu_has_arm_maxopp(void); #endif /* __MACH_PRCMU_H */ -- cgit v1.2.3 From 7627dc802a98aebebc6a34e5b6558ea4717c968c Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 5 Dec 2010 08:51:38 +0000 Subject: ARM: GIC: private a standard get_irqnr_preamble assembler macro Provide a standard get_irqnr_preamble assembler macro for platforms to use, which retrieves the base address of the GIC CPU interface from gic_cpu_base_addr. Allow platforms to override this by defining HAVE_GET_IRQNR_PREAMBLE. Reviewed-by: Catalin Marinas Tested-by: Abhijeet Dharmapurikar Signed-off-by: Russell King --- arch/arm/mach-ux500/include/mach/entry-macro.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S index 3cc3cdf55180..a37f585a3ecb 100644 --- a/arch/arm/mach-ux500/include/mach/entry-macro.S +++ b/arch/arm/mach-ux500/include/mach/entry-macro.S @@ -11,6 +11,7 @@ * warranty of any kind, whether express or implied. */ #include +#define HAVE_GET_IRQNR_PREAMBLE #include .macro disable_fiq -- cgit v1.2.3 From 556fb03869ad4d14e5336093a7a8565456a26c21 Mon Sep 17 00:00:00 2001 From: Sundar Iyer Date: Fri, 3 Dec 2010 20:35:38 +0530 Subject: mach-ux500: add STMPE1601 platform data Signed-off-by: Sundar Iyer [Minor fixups to GPIO enumerators] Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/irqs-board-mop500.h | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index 4a91bbdb973e..7cdeb2af0ebb 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -15,6 +15,7 @@ #define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \ + AB8500_NR_IRQS) +/* TC35892 */ #define TC35892_NR_INTERNAL_IRQS 8 #define TC35892_INT_GPIO(x) (TC35892_NR_INTERNAL_IRQS + (x)) #define TC35892_NR_GPIOS 24 @@ -25,8 +26,18 @@ #define MOP500_EGPIO_IRQ_BASE MOP500_AB8500_IRQ_END #define MOP500_EGPIO_IRQ_END (MOP500_EGPIO_IRQ_BASE \ + MOP500_EGPIO_NR_IRQS) +/* STMPE1601 irqs */ +#define STMPE_NR_INTERNAL_IRQS 9 +#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x)) +#define STMPE_NR_GPIOS 24 +#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS) -#define MOP500_IRQ_END MOP500_EGPIO_IRQ_END +#define MOP500_STMPE1601_IRQBASE MOP500_EGPIO_IRQ_END +#define MOP500_STMPE1601_IRQ(x) (MOP500_STMPE1601_IRQBASE + (x)) + +#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS) + +#define MOP500_IRQ_END MOP500_NR_IRQS #if MOP500_IRQ_END > IRQ_BOARD_END #undef IRQ_BOARD_END -- cgit v1.2.3 From 86e62b93368cffca9111996e3ed9e5b7bf6f0af3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 30 Nov 2010 18:24:57 +0000 Subject: ARM: SMP: remove smp_mpidr.h With "ARM: CPU hotplug: remove bug checks in platform_cpu_die()", we now do not use hard_smp_processor_id(), we no longer need to read the hardware processor ID. Remove the include providing this function. Signed-off-by: Russell King --- arch/arm/mach-ux500/include/mach/smp.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h index bd57c50a5b86..ca2b15b1b3b1 100644 --- a/arch/arm/mach-ux500/include/mach/smp.h +++ b/arch/arm/mach-ux500/include/mach/smp.h @@ -10,7 +10,6 @@ #define ASMARM_ARCH_SMP_H #include -#include /* This is required to wakeup the secondary core */ extern void u8500_secondary_startup(void); -- cgit v1.2.3 From 11c8ea81cc639c2ea56f94a9cdaa6242ff13a3af Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 17 Dec 2010 21:16:23 +0100 Subject: ux500: rename modem IRQ and MBOX files Suffix the U5500 modem IRQ and MBOX files with *-db5500* so that we clearly know the SoC they belong to, in line with the rest of the files in mach-ux500. Cc: Stefan Nilsson Cc: Martin Persson Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/mbox-db5500.h | 88 ++++++++++++++++++++++++++ arch/arm/mach-ux500/include/mach/mbox.h | 88 -------------------------- 2 files changed, 88 insertions(+), 88 deletions(-) create mode 100644 arch/arm/mach-ux500/include/mach/mbox-db5500.h delete mode 100644 arch/arm/mach-ux500/include/mach/mbox.h (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/mbox-db5500.h b/arch/arm/mach-ux500/include/mach/mbox-db5500.h new file mode 100644 index 000000000000..7f9da4d2fbda --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/mbox-db5500.h @@ -0,0 +1,88 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Stefan Nilsson for ST-Ericsson. + * Author: Martin Persson for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2. + */ + +#ifndef __INC_STE_MBOX_H +#define __INC_STE_MBOX_H + +#define MBOX_BUF_SIZE 16 +#define MBOX_NAME_SIZE 8 + +/** + * mbox_recv_cb_t - Definition of the mailbox callback. + * @mbox_msg: The mailbox message. + * @priv: The clients private data as specified in the call to mbox_setup. + * + * This function will be called upon reception of new mailbox messages. + */ +typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv); + +/** + * struct mbox - Mailbox instance struct + * @list: Linked list head. + * @pdev: Pointer to device struct. + * @cb: Callback function. Will be called + * when new data is received. + * @client_data: Clients private data. Will be sent back + * in the callback function. + * @virtbase_peer: Virtual address for outgoing mailbox. + * @virtbase_local: Virtual address for incoming mailbox. + * @buffer: Then internal queue for outgoing messages. + * @name: Name of this mailbox. + * @buffer_available: Completion variable to achieve "blocking send". + * This variable will be signaled when there is + * internal buffer space available. + * @client_blocked: To keep track if any client is currently + * blocked. + * @lock: Spinlock to protect this mailbox instance. + * @write_index: Index in internal buffer to write to. + * @read_index: Index in internal buffer to read from. + * @allocated: Indicates whether this particular mailbox + * id has been allocated by someone. + */ +struct mbox { + struct list_head list; + struct platform_device *pdev; + mbox_recv_cb_t *cb; + void *client_data; + void __iomem *virtbase_peer; + void __iomem *virtbase_local; + u32 buffer[MBOX_BUF_SIZE]; + char name[MBOX_NAME_SIZE]; + struct completion buffer_available; + u8 client_blocked; + spinlock_t lock; + u8 write_index; + u8 read_index; + bool allocated; +}; + +/** + * mbox_setup - Set up a mailbox and return its instance. + * @mbox_id: The ID number of the mailbox. 0 or 1 for modem CPU, + * 2 for modem DSP. + * @mbox_cb: Pointer to the callback function to be called when a new message + * is received. + * @priv: Client user data which will be returned in the callback. + * + * Returns a mailbox instance to be specified in subsequent calls to mbox_send. + */ +struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv); + +/** + * mbox_send - Send a mailbox message. + * @mbox: Mailbox instance (returned by mbox_setup) + * @mbox_msg: The mailbox message to send. + * @block: Specifies whether this call will block until send is possible, + * or return an error if the mailbox buffer is full. + * + * Returns 0 on success or a negative error code on error. -ENOMEM indicates + * that the internal buffer is full and you have to try again later (or + * specify "block" in order to block until send is possible). + */ +int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block); + +#endif /*INC_STE_MBOX_H*/ diff --git a/arch/arm/mach-ux500/include/mach/mbox.h b/arch/arm/mach-ux500/include/mach/mbox.h deleted file mode 100644 index 7f9da4d2fbda..000000000000 --- a/arch/arm/mach-ux500/include/mach/mbox.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * Author: Stefan Nilsson for ST-Ericsson. - * Author: Martin Persson for ST-Ericsson. - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __INC_STE_MBOX_H -#define __INC_STE_MBOX_H - -#define MBOX_BUF_SIZE 16 -#define MBOX_NAME_SIZE 8 - -/** - * mbox_recv_cb_t - Definition of the mailbox callback. - * @mbox_msg: The mailbox message. - * @priv: The clients private data as specified in the call to mbox_setup. - * - * This function will be called upon reception of new mailbox messages. - */ -typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv); - -/** - * struct mbox - Mailbox instance struct - * @list: Linked list head. - * @pdev: Pointer to device struct. - * @cb: Callback function. Will be called - * when new data is received. - * @client_data: Clients private data. Will be sent back - * in the callback function. - * @virtbase_peer: Virtual address for outgoing mailbox. - * @virtbase_local: Virtual address for incoming mailbox. - * @buffer: Then internal queue for outgoing messages. - * @name: Name of this mailbox. - * @buffer_available: Completion variable to achieve "blocking send". - * This variable will be signaled when there is - * internal buffer space available. - * @client_blocked: To keep track if any client is currently - * blocked. - * @lock: Spinlock to protect this mailbox instance. - * @write_index: Index in internal buffer to write to. - * @read_index: Index in internal buffer to read from. - * @allocated: Indicates whether this particular mailbox - * id has been allocated by someone. - */ -struct mbox { - struct list_head list; - struct platform_device *pdev; - mbox_recv_cb_t *cb; - void *client_data; - void __iomem *virtbase_peer; - void __iomem *virtbase_local; - u32 buffer[MBOX_BUF_SIZE]; - char name[MBOX_NAME_SIZE]; - struct completion buffer_available; - u8 client_blocked; - spinlock_t lock; - u8 write_index; - u8 read_index; - bool allocated; -}; - -/** - * mbox_setup - Set up a mailbox and return its instance. - * @mbox_id: The ID number of the mailbox. 0 or 1 for modem CPU, - * 2 for modem DSP. - * @mbox_cb: Pointer to the callback function to be called when a new message - * is received. - * @priv: Client user data which will be returned in the callback. - * - * Returns a mailbox instance to be specified in subsequent calls to mbox_send. - */ -struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv); - -/** - * mbox_send - Send a mailbox message. - * @mbox: Mailbox instance (returned by mbox_setup) - * @mbox_msg: The mailbox message to send. - * @block: Specifies whether this call will block until send is possible, - * or return an error if the mailbox buffer is full. - * - * Returns 0 on success or a negative error code on error. -ENOMEM indicates - * that the internal buffer is full and you have to try again later (or - * specify "block" in order to block until send is possible). - */ -int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block); - -#endif /*INC_STE_MBOX_H*/ -- cgit v1.2.3 From 92389ca8362c42952c7ebb8a0350ac522dcde0f4 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Wed, 8 Dec 2010 11:07:57 +0530 Subject: ux500: remove build-time changing macros To allow the possiblity of building U8500 and U5500 support in the same image. Signed-off-by: Rabin Vincent [Rebased to latest changes in Russells tree] Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/debug-macro.S | 19 +++++++- arch/arm/mach-ux500/include/mach/entry-macro.S | 5 --- arch/arm/mach-ux500/include/mach/hardware.h | 60 +------------------------- arch/arm/mach-ux500/include/mach/setup.h | 1 - 4 files changed, 19 insertions(+), 66 deletions(-) (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S index be7c0f14e310..700fb05ee815 100644 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -14,7 +14,24 @@ #error Invalid Ux500 debug UART #endif -#define __UX500_UART(n) UX500_UART##n##_BASE +/* + * DEBUG_LL only works if only one SOC is built in. We don't use #else below + * in order to get "__UX500_UART redefined" warnings if more than one SOC is + * built, so that there's some hint during the build that something is wrong. + */ + +#ifdef CONFIG_UX500_SOC_DB5500 +#define __UX500_UART(n) U5500_UART##n##_BASE +#endif + +#ifdef CONFIG_UX500_SOC_DB8500 +#define __UX500_UART(n) U8500_UART##n##_BASE +#endif + +#ifndef __UX500_UART +#error Unknown SOC +#endif + #define UX500_UART(n) __UX500_UART(n) #define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S index a37f585a3ecb..071bba94f727 100644 --- a/arch/arm/mach-ux500/include/mach/entry-macro.S +++ b/arch/arm/mach-ux500/include/mach/entry-macro.S @@ -11,15 +11,10 @@ * warranty of any kind, whether express or implied. */ #include -#define HAVE_GET_IRQNR_PREAMBLE #include .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(UX500_GIC_CPU_BASE) - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 6295cc581355..bced4a8e16ef 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -29,65 +29,6 @@ #include #include -#ifdef CONFIG_UX500_SOC_DB8500 -#define UX500(periph) U8500_##periph##_BASE -#elif defined(CONFIG_UX500_SOC_DB5500) -#define UX500(periph) U5500_##periph##_BASE -#endif - -#define UX500_BACKUPRAM0_BASE UX500(BACKUPRAM0) -#define UX500_BACKUPRAM1_BASE UX500(BACKUPRAM1) -#define UX500_B2R2_BASE UX500(B2R2) - -#define UX500_CLKRST1_BASE UX500(CLKRST1) -#define UX500_CLKRST2_BASE UX500(CLKRST2) -#define UX500_CLKRST3_BASE UX500(CLKRST3) -#define UX500_CLKRST5_BASE UX500(CLKRST5) -#define UX500_CLKRST6_BASE UX500(CLKRST6) - -#define UX500_DMA_BASE UX500(DMA) -#define UX500_FSMC_BASE UX500(FSMC) - -#define UX500_GIC_CPU_BASE UX500(GIC_CPU) -#define UX500_GIC_DIST_BASE UX500(GIC_DIST) - -#define UX500_I2C1_BASE UX500(I2C1) -#define UX500_I2C2_BASE UX500(I2C2) -#define UX500_I2C3_BASE UX500(I2C3) - -#define UX500_L2CC_BASE UX500(L2CC) -#define UX500_MCDE_BASE UX500(MCDE) -#define UX500_MTU0_BASE UX500(MTU0) -#define UX500_MTU1_BASE UX500(MTU1) -#define UX500_PRCMU_BASE UX500(PRCMU) - -#define UX500_RNG_BASE UX500(RNG) -#define UX500_RTC_BASE UX500(RTC) - -#define UX500_SCU_BASE UX500(SCU) - -#define UX500_SDI0_BASE UX500(SDI0) -#define UX500_SDI1_BASE UX500(SDI1) -#define UX500_SDI2_BASE UX500(SDI2) -#define UX500_SDI3_BASE UX500(SDI3) -#define UX500_SDI4_BASE UX500(SDI4) - -#define UX500_SPI0_BASE UX500(SPI0) -#define UX500_SPI1_BASE UX500(SPI1) -#define UX500_SPI2_BASE UX500(SPI2) -#define UX500_SPI3_BASE UX500(SPI3) - -#define UX500_SIA_BASE UX500(SIA) -#define UX500_SVA_BASE UX500(SVA) - -#define UX500_TWD_BASE UX500(TWD) - -#define UX500_UART0_BASE UX500(UART0) -#define UX500_UART1_BASE UX500(UART1) -#define UX500_UART2_BASE UX500(UART2) - -#define UX500_USBOTG_BASE UX500(USBOTG) - /* ST-Ericsson modified pl022 id */ #define SSP_PER_ID 0x01080022 @@ -143,6 +84,7 @@ static inline bool cpu_is_u5500(void) } #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) +#define ux500_unknown_soc() BUG() #endif diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 469877e0de90..5d8423294d41 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -14,7 +14,6 @@ #include #include -extern void __init ux500_map_io(void); extern void __init u5500_map_io(void); extern void __init u8500_map_io(void); -- cgit v1.2.3 From 5dc55e0a39434ec8bec7978aef2dc00c91a530ba Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Wed, 8 Dec 2010 11:07:58 +0530 Subject: ux500: rename MOP board Kconfig Rename the MOP board Kconfig entries to the same name as the machine type, so that the machine_is_*() macros work correctly. Signed-off-by: Rabin Vincent [Updated to match changes in the tree] Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/irqs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index 880ae45bc235..ba1294c13c4d 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -36,7 +36,7 @@ /* This will be overridden by board-specific irq headers */ #define IRQ_BOARD_END IRQ_BOARD_START -#ifdef CONFIG_MACH_U8500_MOP +#ifdef CONFIG_MACH_U8500 #include #endif -- cgit v1.2.3 From abf12d719a2c9e45f7f90c02a3a25107206ed57a Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Wed, 8 Dec 2010 11:07:59 +0530 Subject: ux500: dynamic SOC detection Dynamically detect the DBx500 SOC an revision based on the ASIC ID. Signed-off-by: Rabin Vincent Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/hardware.h | 50 +----------------- arch/arm/mach-ux500/include/mach/id.h | 80 +++++++++++++++++++++++++++++ arch/arm/mach-ux500/include/mach/setup.h | 1 + 3 files changed, 82 insertions(+), 49 deletions(-) create mode 100644 arch/arm/mach-ux500/include/mach/id.h (limited to 'arch/arm/mach-ux500/include') diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index bced4a8e16ef..bf63f2631ba0 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -34,57 +34,9 @@ #ifndef __ASSEMBLY__ -#include - -static inline bool cpu_is_u8500(void) -{ -#ifdef CONFIG_UX500_SOC_DB8500 - return 1; -#else - return 0; -#endif -} - -#define CPUID_DB8500ED 0x410fc090 -#define CPUID_DB8500V1 0x411fc091 -#define CPUID_DB8500V2 0x412fc091 - -static inline bool cpu_is_u8500ed(void) -{ - return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500ED); -} - -static inline bool cpu_is_u8500v1(void) -{ - return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V1); -} - -static inline bool cpu_is_u8500v2(void) -{ - return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V2); -} - -#ifdef CONFIG_UX500_SOC_DB8500 -bool cpu_is_u8500v10(void); -bool cpu_is_u8500v11(void); -bool cpu_is_u8500v20(void); -#else -static inline bool cpu_is_u8500v10(void) { return false; } -static inline bool cpu_is_u8500v11(void) { return false; } -static inline bool cpu_is_u8500v20(void) { return false; } -#endif - -static inline bool cpu_is_u5500(void) -{ -#ifdef CONFIG_UX500_SOC_DB5500 - return 1; -#else - return 0; -#endif -} +#include #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) -#define ux500_unknown_soc() BUG() #endif diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h new file mode 100644 index 000000000000..f1288d10b6ab --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/id.h @@ -0,0 +1,80 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_UX500_ID +#define __MACH_UX500_ID + +/** + * struct dbx500_asic_id - fields of the ASIC ID + * @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard" + * @partnumber: hithereto 0x8500 for DB8500 + * @revision: version code in the series + */ +struct dbx500_asic_id { + u16 partnumber; + u8 revision; + u8 process; +}; + +extern struct dbx500_asic_id dbx500_id; + +static inline unsigned int __attribute_const__ dbx500_partnumber(void) +{ + return dbx500_id.partnumber; +} + +static inline unsigned int __attribute_const__ dbx500_revision(void) +{ + return dbx500_id.revision; +} + +/* + * SOCs + */ + +static inline bool __attribute_const__ cpu_is_u8500(void) +{ + return dbx500_partnumber() == 0x8500; +} + +static inline bool __attribute_const__ cpu_is_u5500(void) +{ + return dbx500_partnumber() == 0x5500; +} + +/* + * 8500 revisions + */ + +static inline bool __attribute_const__ cpu_is_u8500ed(void) +{ + return cpu_is_u8500() && dbx500_revision() == 0x00; +} + +static inline bool __attribute_const__ cpu_is_u8500v1(void) +{ + return cpu_is_u8500() && (dbx500_revision() & 0xf0) == 0xA0; +} + +static inline bool __attribute_const__ cpu_is_u8500v10(void) +{ + return cpu_is_u8500() && dbx500_revision() == 0xA0; +} + +static inline bool __attribute_const__ cpu_is_u8500v11(void) +{ + return cpu_is_u8500() && dbx500_revision() == 0xA1; +} + +static inline bool __attribute_const__ cpu_is_u8500v2(void) +{ + return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0); +} + +#define ux500_unknown_soc() BUG() + +#endif diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 5d8423294d41..a7d363fdb4cd 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -14,6 +14,7 @@ #include #include +void __init ux500_map_io(void); extern void __init u5500_map_io(void); extern void __init u8500_map_io(void); -- cgit v1.2.3