From df1ec6deeb18097ae670bf6d001b6e95c8332640 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 8 Nov 2005 19:15:30 +0000 Subject: [ARM] 3125/2: VR1000: Fix map_decs initialiser Patch from Ben Dooks Fix the initialisation of the map_desc fields in the Thorcom VR1000 machine support to use the new .pfn initialiser. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/mach-vr1000.c | 56 +++++++++++++++++++++++++------------ 1 file changed, 38 insertions(+), 18 deletions(-) (limited to 'arch/arm/mach-s3c2410') diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 46b259673c18..ae7e099bf6c8 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -74,27 +74,47 @@ /* macros to modify the physical addresses for io space */ -#define PA_CS2(item) ((item) + S3C2410_CS2) -#define PA_CS3(item) ((item) + S3C2410_CS3) -#define PA_CS4(item) ((item) + S3C2410_CS4) -#define PA_CS5(item) ((item) + S3C2410_CS5) +#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2)) +#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3)) +#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4)) +#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5)) static struct map_desc vr1000_iodesc[] __initdata = { /* ISA IO areas */ - - { (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - - /* we could possibly compress the next set down into a set of smaller tables - * pagetables, but that would mean using an L2 section, and it still means - * we cannot actually feed the same register to an LDR due to 16K spacing - */ - - /* bast CPLD control registers, and external interrupt controls */ - { (u32)VR1000_VA_CTRL1, VR1000_PA_CTRL1, SZ_1M, MT_DEVICE }, - { (u32)VR1000_VA_CTRL2, VR1000_PA_CTRL2, SZ_1M, MT_DEVICE }, - { (u32)VR1000_VA_CTRL3, VR1000_PA_CTRL3, SZ_1M, MT_DEVICE }, - { (u32)VR1000_VA_CTRL4, VR1000_PA_CTRL4, SZ_1M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = PA_CS2(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = PA_CS3(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, + + /* CPLD control registers, and external interrupt controls */ + { + .virtual = (u32)VR1000_VA_CTRL1, + .pfn = __phys_to_pfn(VR1000_PA_CTRL1), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)VR1000_VA_CTRL2, + .pfn = __phys_to_pfn(VR1000_PA_CTRL2), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)VR1000_VA_CTRL3, + .pfn = __phys_to_pfn(VR1000_PA_CTRL3), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)VR1000_VA_CTRL4, + .pfn = __phys_to_pfn(VR1000_PA_CTRL4), + .length = SZ_1M, + .type = MT_DEVICE, + }, /* peripheral space... one for each of fast/slow/byte/16bit */ /* note, ide is only decoded in word space, even though some registers -- cgit v1.2.3 From 1d23b65de54c35844e82bdb08bc85d8142e310ea Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 8 Nov 2005 19:15:31 +0000 Subject: [ARM] 3126/1: BAST: fix map_desc initialisation Patch from Ben Dooks Fix the map_desc entries to use the new .pfn initialiser for the Simtec BAST machine support. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/mach-bast.c | 73 ++++++++++++++++++++++++++++----------- 1 file changed, 52 insertions(+), 21 deletions(-) (limited to 'arch/arm/mach-s3c2410') diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 0b71c896bbd1..1be2567a7486 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -89,32 +89,63 @@ /* macros to modify the physical addresses for io space */ -#define PA_CS2(item) ((item) + S3C2410_CS2) -#define PA_CS3(item) ((item) + S3C2410_CS3) -#define PA_CS4(item) ((item) + S3C2410_CS4) -#define PA_CS5(item) ((item) + S3C2410_CS5) +#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2)) +#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3)) +#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4)) +#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5)) static struct map_desc bast_iodesc[] __initdata = { /* ISA IO areas */ - - { (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - - /* we could possibly compress the next set down into a set of smaller tables - * pagetables, but that would mean using an L2 section, and it still means - * we cannot actually feed the same register to an LDR due to 16K spacing - */ - + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = PA_CS2(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = PA_CS3(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, /* bast CPLD control registers, and external interrupt controls */ - { (u32)BAST_VA_CTRL1, BAST_PA_CTRL1, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_CTRL2, BAST_PA_CTRL2, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_CTRL3, BAST_PA_CTRL3, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_CTRL4, BAST_PA_CTRL4, SZ_1M, MT_DEVICE }, - + { + .virtual = (u32)BAST_VA_CTRL1, + .pfn = __phys_to_pfn(BAST_PA_CTRL1), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL2, + .pfn = __phys_to_pfn(BAST_PA_CTRL2), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL3, + .pfn = __phys_to_pfn(BAST_PA_CTRL3), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL4, + .pfn = __phys_to_pfn(BAST_PA_CTRL4), + .length = SZ_1M, + .type = MT_DEVICE, + }, /* PC104 IRQ mux */ - { (u32)BAST_VA_PC104_IRQREQ, BAST_PA_PC104_IRQREQ, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_PC104_IRQRAW, BAST_PA_PC104_IRQRAW, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_PC104_IRQMASK, BAST_PA_PC104_IRQMASK, SZ_1M, MT_DEVICE }, + { + .virtual = (u32)BAST_VA_PC104_IRQREQ, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_PC104_IRQRAW, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_PC104_IRQMASK, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK), + .length = SZ_1M, + .type = MT_DEVICE, + }, /* peripheral space... one for each of fast/slow/byte/16bit */ /* note, ide is only decoded in word space, even though some registers -- cgit v1.2.3 From f8c905d368c757e2c96db293a472a31abcf4b147 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 8 Nov 2005 22:43:05 +0000 Subject: [ARM] 3132/1: S3C2410 - reset on decompression error Patch from Ben Dooks Force a watchdog reset if the system fails to decompress properly. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/mach-s3c2410') diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index c796bcdd6158..0b9d7ca49ec1 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -121,6 +121,14 @@ config S3C2410_BOOT_WATCHDOG system resets depends on the value of PCLK. The timeout on an 200MHz s3c2410 should be about 30 seconds. +config S3C2410_BOOT_ERROR_RESET + bool "S3C2410 Reboot on decompression error" + depends on ARCH_S3C2410 + help + Say y here to use the watchdog to reset the system if the + kernel decompressor detects an error during decompression. + + comment "S3C2410 Setup" config S3C2410_DMA -- cgit v1.2.3 From 8dd523118bfbcaca5b67923ff6ee546e04a4db64 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 9 Nov 2005 14:05:30 +0000 Subject: [ARM] 3136/1: Anubis - fix map_desc initialisers Patch from Ben Dooks Fix the map_desc initialisers for the Simtec Anubis board to match the new initialiser scheme. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/mach-anubis.c | 51 ++++++++++++++++++++++++++++++------- 1 file changed, 42 insertions(+), 9 deletions(-) (limited to 'arch/arm/mach-s3c2410') diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c index 8390b685c2b6..0f81fc0c2f7f 100644 --- a/arch/arm/mach-s3c2410/mach-anubis.c +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -56,8 +56,16 @@ static struct map_desc anubis_iodesc[] __initdata = { /* ISA IO areas */ - { (u32)S3C24XX_VA_ISA_BYTE, 0x0, SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_WORD, 0x0, SZ_16M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(0x0), + .length = SZ_4M, + .type = MT_DEVICE + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(0x0), + .length = SZ_4M, MT_DEVICE + }, /* we could possibly compress the next set down into a set of smaller tables * pagetables, but that would mean using an L2 section, and it still means @@ -66,16 +74,41 @@ static struct map_desc anubis_iodesc[] __initdata = { /* CPLD control registers */ - { (u32)ANUBIS_VA_CTRL1, ANUBIS_PA_CTRL1, SZ_4K, MT_DEVICE }, - { (u32)ANUBIS_VA_CTRL2, ANUBIS_PA_CTRL2, SZ_4K, MT_DEVICE }, + { + .virtual = (u32)ANUBIS_VA_CTRL1, + .pfn = __phys_to_pfn(ANUBIS_PA_CTRL1), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = (u32)ANUBIS_VA_CTRL2, + .pfn = __phys_to_pfn(ANUBIS_PA_CTRL2), + .length = SZ_4K, + .type =MT_DEVICE + }, /* IDE drives */ - { (u32)ANUBIS_IDEPRI, S3C2410_CS3, SZ_1M, MT_DEVICE }, - { (u32)ANUBIS_IDEPRIAUX, S3C2410_CS3+(1<<26), SZ_1M, MT_DEVICE }, - - { (u32)ANUBIS_IDESEC, S3C2410_CS4, SZ_1M, MT_DEVICE }, - { (u32)ANUBIS_IDESECAUX, S3C2410_CS4+(1<<26), SZ_1M, MT_DEVICE }, + { + .virtual = (u32)ANUBIS_IDEPRI, + .pfn = __phys_to_pfn(S3C2410_CS3), + .length = SZ_1M, + .type = MT_DEVICE + }, { + .virtual = (u32)ANUBIS_IDEPRIAUX, + .pfn = __phys_to_pfn(S3C2410_CS3+(1<<26)), + .length = SZ_1M, + .type = MT_DEVICE + }, { + .virtual = (u32)ANUBIS_IDESEC, + .pfn = __phys_to_pfn(S3C2410_CS4), + .length = SZ_1M, + .type = MT_DEVICE + }, { + .virtual = (u32)ANUBIS_IDESECAUX, + .pfn = __phys_to_pfn(S3C2410_CS4+(1<<26)), + .length = SZ_1M, + .type = MT_DEVICE + }, }; #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -- cgit v1.2.3 From ff6ffa82fe122ecda457bb10dbab7b0c08ee3803 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 9 Nov 2005 14:05:31 +0000 Subject: [ARM] 3137/1: RX3715 - fix map_desc initialiser Patch from Ben Dooks Change the initialiser for the map_desc for the iPAQ RX3715 to use the new pfn initialiser, and also reduce the amount of ISA space mapped (we only need to stop any ISA IO writes OOPsing the system, so do not need >1Mbyte of space) Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/mach-rx3715.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-s3c2410') diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c index 24d69019a843..f8d86d1e16b6 100644 --- a/arch/arm/mach-s3c2410/mach-rx3715.c +++ b/arch/arm/mach-s3c2410/mach-rx3715.c @@ -56,8 +56,17 @@ static struct map_desc rx3715_iodesc[] __initdata = { /* dump ISA space somewhere unused */ - { (u32)S3C24XX_VA_ISA_WORD, S3C2410_CS3, SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_BYTE, S3C2410_CS3, SZ_16M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS3), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS3), + .length = SZ_1M, + .type = MT_DEVICE, + }, }; -- cgit v1.2.3 From cbe69f95fa7ffc4604622cd4f7efd56ed10999fe Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 9 Nov 2005 14:05:31 +0000 Subject: [ARM] 3138/1: SMDK2440 - fix map_desc initialisation (and ISA memory space) Patch from Ben Dooks Fix the map_desc initialisers for the SMDK2440 machine to use the new .pfn method, and at the same time making the differntiation between ISA IO and Memory space accesses Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/mach-smdk2440.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-s3c2410') diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c index d666c621ad06..4e31118533e6 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2410/mach-smdk2440.c @@ -58,8 +58,27 @@ static struct map_desc smdk2440_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ - { (u32)S3C24XX_VA_ISA_WORD, S3C2410_CS2, SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_BYTE, S3C2410_CS2, SZ_16M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + } }; #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -- cgit v1.2.3