From 88cde8b78f6914ce542949e5a8dd9031e3035996 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 6 Jul 2012 20:03:37 +0800 Subject: ARM: dts: imx: update #interrupt-cells for gpio nodes Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that the gpio irq type can be specified in device tree. Also update binding document to make it clear. Reported-by: Sascha Hauer Acked-by: Sascha Hauer Signed-off-by: Shawn Guo --- Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt') diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt index 5f360e7cdd32..4f3929713ae4 100644 --- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt @@ -11,6 +11,13 @@ Required properties: the second cell is used to specify the gpio polarity: 0 = active high 1 = active low +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells : Should be 2. The first cell is the GPIO number. + The second cell bits[3:0] is used to specify trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. Example: @@ -20,4 +27,6 @@ gpio0: gpio@73f84000 { interrupts = <50 51>; gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; -- cgit v1.2.3