summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2010-08-16mac80211: use cipher suite selectorsJohannes Berg
Currently, mac80211 translates the cfg80211 cipher suite selectors into ALG_* values. That isn't all too useful, and some drivers benefit from the distinction between WEP40 and WEP104 as well. Therefore, convert it all to use the cipher suite selectors. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16cfg80211: support sysfs namespacesJohannes Berg
Enable using network namespaces with wireless devices even when sysfs is enabled using the same infrastructure that was built for netdevs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16mac80211: allow drivers to request SM PS mode changeJohannes Berg
Sometimes drivers have more information than the stack about how their antennas/chains are used, and may require that the SM PS mode be changed. This could happen, for example, when detecting that the user disconnected an antenna. Thus this patch introduces API to allow drivers to request SM PS mode changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16mac80211: per interface idle notificationJohannes Berg
Sometimes we don't just need to know whether or not the device is idle, but also per interface. This adds that reporting capability to mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16net: mac80211: Fix a typo.Andrea Gelmini
"userpace" -> "userspace" Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16cfg80211: deauth doesn't always imply disconnectJohannes Berg
When an AP sends a deauth frame, or we send one to an AP, that only means we lost our connection if we were actually connected to that AP. Check this to avoid sending spurious "disconnected" events and breaking "iw ... link" reporting. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16mac80211: AMPDU rx reorder timeout timerChristian Lamparter
This patch introduces a new timer, which will release queued-up MPDUs from the reorder buffer, whenever they've waited for more than HT_RX_REORDER_BUF_TIMEOUT (which is at around 100 ms). The advantage of having a dedicated timer, instead of relying on a constant stream of freshly arriving aMPDUs to release the old ones, is particularly observable when even a small fraction of MPDUs are forever lost at low network speeds. Previously under these circumstances frames would become stuck in the reorder buffer and the network stack of both HT peers throttled back, instead of revving up and gunning the pipes. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16mac80211: remove unused rate function parameterChristian Lamparter
This patch removes a few stale parameters and variables which survived the last, large rx-path reorganization: "mac80211: correctly place aMPDU RX reorder code" Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16mac80211: put rx handlers into separate functionsChristian Lamparter
This patch takes the reorder logic from the RX path and moves it into separate routines to make the expired frame release accessible. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16mac80211: Don't squash error codes in key setup functionsBen Hutchings
ieee80211_add_key() currently returns -ENOMEM in case of any error, including a missing crypto algorithm. Change ieee80211_key_alloc() and ieee80211_aes_{key_setup_encrypt,cmac_key_setup}() to encode errors with ERR_PTR() rather than returning NULL, and change ieee80211_add_key() accordingly. Compile-tested only. Reported-by: Marcin Owsiany <porridge@debian.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16mac80211: unify scan and work mutexesJohannes Berg
Having both scan and work mutexes is not just a bit too fine grained, it also creates issues when there's code that needs both since they then need to be acquired in the right order, which can be hard to do. Therefore, use just a single mutex for both. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16mac80211: don't check rates on PLCP error framesJohannes Berg
Frames that failed PLCP error checks are most likely microwave transmissions (well, maybe not ...) and don't have a proper rate detected, so ignore it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16mac80211: fix driver offchannel notification when the channel does not changeFelix Fietkau
When running in client mode and associating to an AP, the channel change is usually performed with the offchannel flag still set. However after the assoc is complete, the following channel change event is suppressed because the run time channel is already set to the operating channel. Fix this by sending channel change notifications to the driver even if only the offchannel flag changes. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-08-16wireless: upcase alpha2 values in queue_regulatory_requestJohn W. Linville
This provides a little more flexibility for human users, and it allows us to use isalpha rather than the custom is_alpha_upper. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16mac80211: support use of NAPI for bottom-half processingJohn W. Linville
This patch implement basic infrastructure to support use of NAPI by mac80211-based hardware drivers. Because mac80211 devices can support multiple netdevs, a dummy netdev is used for interfacing with the NAPI code in the core of the network stack. That structure is hidden from the hardware drivers, but the actual napi_struct is exposed in the ieee80211_hw structure so that the poll routines in drivers can retrieve that structure. Hardware drivers can also specify their own weight value for NAPI polling. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-10Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6
2010-08-10Bluetooth: Fix incorrect setting of remote_tx_win for L2CAP ERTMMat Martineau
remote_tx_win is intended to be set on receipt of an L2CAP configuration request. The value is used to determine the size of the transmit window on the remote side of an ERTM connection, so L2CAP can stop sending frames when that remote window is full. An incorrect remote_tx_win value will cause the stack to not fully utilize the tx window (performance impact), or to overfill the remote tx window (causing dropped frames or a disconnect). This patch removes an extra setting of remote_tx_win when a configuration response is received. The transmit window has a different meaning in a response - it is an informational value less than or equal to the local tx_win. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-10Bluetooth: Fix endianness issue with L2CAP MPS configurationMat Martineau
Incoming configuration values must be converted to native CPU order before use. This fixes a bug where a little-endian MPS value is compared to a native CPU value. On big-endian processors, this can cause ERTM and streaming mode segmentation to produce PDUs that are larger than the remote stack is expecting, or that would produce fragmented skbs that the current FCS code cannot handle. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-09cfg80211: fix locking in action frame TXJohannes Berg
Accesses to "wdev->current_bss" must be locked with the wdev lock, which action frame transmission is missing. Cc: stable@kernel.org [2.6.33+] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-07pkt_sched: Fix sch_sfq vs tcf_bind_filter oopsJarek Poplawski
Since there was added ->tcf_chain() method without ->bind_tcf() to sch_sfq class options, there is oops when a filter is added with the classid parameter. Fixes commit 7d2681a6ff4f9ab5e48d02550b4c6338f1638998 netdev thread: null pointer at cls_api.c Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Reported-by: Franchoze Eric <franchoze@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-07net: disable preemption before call smp_processor_id()Changli Gao
Although netif_rx() isn't expected to be called in process context with preemption enabled, it'd better handle this case. And this is why get_cpu() is used in the non-RPS #ifdef branch. If tree RCU is selected, rcu_read_lock() won't disable preemption, so preempt_disable() should be called explictly. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-07tcp: no md5sig option size check bugDmitry Popov
tcp_parse_md5sig_option doesn't check md5sig option (TCPOPT_MD5SIG) length, but tcp_v[46]_inbound_md5_hash assume that it's at least 16 bytes long. Signed-off-by: Dmitry Popov <dp@highloadlab.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-06Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-08-05net: Fix napi_gro_frags vs netpoll pathJarek Poplawski
The netpoll_rx_on() check in __napi_gro_receive() skips part of the "common" GRO_NORMAL path, especially "pull:" in dev_gro_receive(), where at least eth header should be copied for entirely paged skbs. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6
2010-08-04ppp: make channel_ops conststephen hemminger
The PPP channel ops structure should be const. Cleanup the declarations to use standard C99 format. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04RxRPC: Fix a potential deadlock between the call resend_timer and state_lockDavid Howells
RxRPC can potentially deadlock as rxrpc_resend_time_expired() wants to get call->state_lock so that it can alter the state of an RxRPC call. However, its caller (call_timer_fn()) has an apparent lock on the timer struct. The problem is that rxrpc_resend_time_expired() isn't permitted to lock call->state_lock as this could cause a deadlock against rxrpc_send_abort() as that takes state_lock and then attempts to delete the resend timer by calling del_timer_sync(). The deadlock can occur because del_timer_sync() will sit there forever waiting for rxrpc_resend_time_expired() to return, but the latter may then wait for call->state_lock, which rxrpc_send_abort() holds around del_timer_sync()... This leads to a warning appearing in the kernel log that looks something like the attached. It should be sufficient to simply dispense with the locks. It doesn't matter if we set the resend timer expired event bit and queue the event processor whilst we're changing state to one where the resend timer is irrelevant as the event can just be ignored by the processor thereafter. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.35-rc3-cachefs+ #115 ------------------------------------------------------- swapper/0 is trying to acquire lock: (&call->state_lock){++--..}, at: [<ffffffffa00200d4>] rxrpc_resend_time_expired+0x56/0x96 [af_rxrpc] but task is already holding lock: (&call->resend_timer){+.-...}, at: [<ffffffff8103b675>] run_timer_softirq+0x182/0x2a5 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&call->resend_timer){+.-...}: [<ffffffff810560bc>] __lock_acquire+0x889/0x8fa [<ffffffff81056184>] lock_acquire+0x57/0x6d [<ffffffff8103bb9c>] del_timer_sync+0x3c/0x86 [<ffffffffa002bb7a>] rxrpc_send_abort+0x50/0x97 [af_rxrpc] [<ffffffffa002bdd9>] rxrpc_kernel_abort_call+0xa1/0xdd [af_rxrpc] [<ffffffffa0061588>] afs_deliver_to_call+0x129/0x368 [kafs] [<ffffffffa006181b>] afs_process_async_call+0x54/0xff [kafs] [<ffffffff8104261d>] worker_thread+0x1ef/0x2e2 [<ffffffff81045f47>] kthread+0x7a/0x82 [<ffffffff81002cd4>] kernel_thread_helper+0x4/0x10 -> #0 (&call->state_lock){++--..}: [<ffffffff81055237>] validate_chain+0x727/0xd23 [<ffffffff810560bc>] __lock_acquire+0x889/0x8fa [<ffffffff81056184>] lock_acquire+0x57/0x6d [<ffffffff813e6b69>] _raw_read_lock_bh+0x34/0x43 [<ffffffffa00200d4>] rxrpc_resend_time_expired+0x56/0x96 [af_rxrpc] [<ffffffff8103b6e6>] run_timer_softirq+0x1f3/0x2a5 [<ffffffff81036828>] __do_softirq+0xa2/0x13e [<ffffffff81002dcc>] call_softirq+0x1c/0x28 [<ffffffff810049f0>] do_softirq+0x38/0x80 [<ffffffff810361a2>] irq_exit+0x45/0x47 [<ffffffff81018fb3>] smp_apic_timer_interrupt+0x88/0x96 [<ffffffff81002893>] apic_timer_interrupt+0x13/0x20 [<ffffffff810011ac>] cpu_idle+0x4d/0x83 [<ffffffff813e06f3>] start_secondary+0x1bd/0x1c1 other info that might help us debug this: 1 lock held by swapper/0: #0: (&call->resend_timer){+.-...}, at: [<ffffffff8103b675>] run_timer_softirq+0x182/0x2a5 stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.35-rc3-cachefs+ #115 Call Trace: <IRQ> [<ffffffff81054414>] print_circular_bug+0xae/0xbd [<ffffffff81055237>] validate_chain+0x727/0xd23 [<ffffffff810560bc>] __lock_acquire+0x889/0x8fa [<ffffffff810539a7>] ? mark_lock+0x42f/0x51f [<ffffffff81056184>] lock_acquire+0x57/0x6d [<ffffffffa00200d4>] ? rxrpc_resend_time_expired+0x56/0x96 [af_rxrpc] [<ffffffff813e6b69>] _raw_read_lock_bh+0x34/0x43 [<ffffffffa00200d4>] ? rxrpc_resend_time_expired+0x56/0x96 [af_rxrpc] [<ffffffffa00200d4>] rxrpc_resend_time_expired+0x56/0x96 [af_rxrpc] [<ffffffff8103b6e6>] run_timer_softirq+0x1f3/0x2a5 [<ffffffff8103b675>] ? run_timer_softirq+0x182/0x2a5 [<ffffffffa002007e>] ? rxrpc_resend_time_expired+0x0/0x96 [af_rxrpc] [<ffffffff810367ef>] ? __do_softirq+0x69/0x13e [<ffffffff81036828>] __do_softirq+0xa2/0x13e [<ffffffff81002dcc>] call_softirq+0x1c/0x28 [<ffffffff810049f0>] do_softirq+0x38/0x80 [<ffffffff810361a2>] irq_exit+0x45/0x47 [<ffffffff81018fb3>] smp_apic_timer_interrupt+0x88/0x96 [<ffffffff81002893>] apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff81049de1>] ? __atomic_notifier_call_chain+0x0/0x86 [<ffffffff8100955b>] ? mwait_idle+0x6e/0x78 [<ffffffff81009552>] ? mwait_idle+0x65/0x78 [<ffffffff810011ac>] cpu_idle+0x4d/0x83 [<ffffffff813e06f3>] start_secondary+0x1bd/0x1c1 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04sch_sfq: add sanity check for the packet lengthChangli Gao
The packet length should be checked before the packet data is dereferenced. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04cls_rsvp: add sanity check for the packet lengthChangli Gao
The packet length should be checked before the packet data is dereferenced. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04cls_flow: add sanity check for the packet lengthChangli Gao
The packet length should be checked before the packet data is dereferenced. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04act_nat: fix on the TX pathChangli Gao
On the TX path, skb->data points to the ethernet header, not the network header. So when validating the packet length for accessing we should take the ethernet header into account. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits) Documentation: update broken web addresses. fix comment typo "choosed" -> "chosen" hostap:hostap_hw.c Fix typo in comment Fix spelling contorller -> controller in comments Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault fs/Kconfig: Fix typo Userpace -> Userspace Removing dead MACH_U300_BS26 drivers/infiniband: Remove unnecessary casts of private_data fs/ocfs2: Remove unnecessary casts of private_data libfc: use ARRAY_SIZE scsi: bfa: use ARRAY_SIZE drm: i915: use ARRAY_SIZE drm: drm_edid: use ARRAY_SIZE synclink: use ARRAY_SIZE block: cciss: use ARRAY_SIZE comment typo fixes: charater => character fix comment typos concerning "challenge" arm: plat-spear: fix typo in kerneldoc reiserfs: typo comment fix update email address ...
2010-08-04mac80211: Fix compilation warning when CONFIG_INET is not setJuuso Oikarinen
The warning is: net/mac80211/main.c:688: warning: label ‘fail_ifa’ defined but not used Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-04mac80211: fix scan locking wrt. hw scanJohannes Berg
Releasing the scan mutex while starting scans can lead to unexpected things happening, so we shouldn't do that. Fix that and hold the mutex across the scan triggering. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits) phy/marvell: add 88ec048 support igb: Program MDICNFG register prior to PHY init e1000e: correct MAC-PHY interconnect register offset for 82579 hso: Add new product ID can: Add driver for esd CAN-USB/2 device l2tp: fix export of header file for userspace can-raw: Fix skb_orphan_try handling Revert "net: remove zap_completion_queue" net: cleanup inclusion phy/marvell: add 88e1121 interface mode support u32: negative offset fix net: Fix a typo from "dev" to "ndev" igb: Use irq_synchronize per vector when using MSI-X ixgbevf: fix null pointer dereference due to filter being set for VLAN 0 e1000e: Fix irq_synchronize in MSI-X case e1000e: register pm_qos request on hardware activation ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice net: Add getsockopt support for TCP thin-streams cxgb4: update driver version cxgb4: add new PCI IDs ... Manually fix up conflicts in: - drivers/net/e1000e/netdev.c: due to pm_qos registration infrastructure changes - drivers/net/phy/marvell.c: conflict between adding 88ec048 support and cleaning up the IDs - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req conflict (registration change vs marking it static)
2010-08-04Bluetooth: Check result code of L2CAP information responseVille Tervo
Check result code of L2CAP information response. Otherwise it would read invalid feature mask and access invalid memory. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-04Bluetooth: Don't send RFC for Basic Mode if only it is supportedGustavo F. Padovan
If the remote side doesn't support Enhanced Retransmission Mode neither Streaming Mode, we shall not send the RFC option. Some devices that only supports Basic Mode do not understanding the RFC option. This patch fixes the regression found with these devices. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-04Merge branch 'master' into for-nextJiri Kosina
2010-08-03can-raw: Fix skb_orphan_try handlingOliver Hartkopp
Commit fc6055a5ba31e2c14e36e8939f9bf2b6d586a7f5 (net: Introduce skb_orphan_try()) allows an early orphan of the skb and takes care on tx timestamping, which needs the sk-reference in the skb on driver level. So does the can-raw socket, which has not been taken into account here. The patch below adds a 'prevent_sk_orphan' bit in the skb tx shared info, which fixes the problem discovered by Matthias Fuchs here: http://marc.info/?t=128030411900003&r=1&w=2 Even if it's not a primary tx timestamp topic it fits well into some skb shared tx context. Or should be find a different place for the information to protect the sk reference until it reaches the driver level? Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-03Revert "net: remove zap_completion_queue"David S. Miller
This reverts commit 15e83ed78864d0625e87a85f09b297c0919a4797. As explained by Johannes Berg, the optimization made here is invalid. Or, at best, incomplete. Not only destructor invocation, but conntract entry releasing must be executed outside of hw IRQ context. So just checking "skb->destructor" is insufficient. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02net: cleanup inclusionChangli Gao
Commit ab95bfe01f9872459c8678572ccadbf646badad0 replaces bridge and macvlan hooks in __netif_receive_skb(), so dev.c doesn't need to include their headers. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/e1000e/hw.h net/bridge/br_device.c net/bridge/br_input.c
2010-08-02u32: negative offset fixstephen hemminger
It was possible to use a negative offset in a u32 match to reference the ethernet header or other parts of the link layer header. This fixes the regression caused by: commit fbc2e7d9cf49e0bf89b9e91fd60a06851a855c5d Author: Changli Gao <xiaosuo@gmail.com> Date: Wed Jun 2 07:32:42 2010 -0700 cls_u32: use skb_header_pointer() to dereference data safely Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twiceChangli Gao
6c79bf0f2440fd250c8fce8d9b82fcf03d4e8350 subtracts PPPOE_SES_HLEN from mtu at the front of ip_fragment(). So the later subtraction should be removed. The MTU of 802.1q is also 1500, so MTU should not be changed. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Bart De Schuymer <bdschuym@pandora.bo> ---- net/ipv4/ip_output.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) Signed-off-by: Bart De Schuymer <bdschuym@pandora.bo> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02net: Add getsockopt support for TCP thin-streamsJosh Hunt
Initial TCP thin-stream commit did not add getsockopt support for the new socket options: TCP_THIN_LINEAR_TIMEOUTS and TCP_THIN_DUPACK. This adds support for them. Signed-off-by: Josh Hunt <johunt@akamai.com> Tested-by: Andreas Petlund <apetlund@simula.no> Acked-by: Andreas Petlund <apetlund@simula.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2010-08-02fs/9p: destroy fid on failed removeAneesh Kumar K.V
9P spec says: "It is correct to consider remove to be a clunk with the side effect of removing the file if permissions allow. " So even if remove fails we need to destroy the fid. Without this patch an rmdir on a directory with contents leave the new cloned directory fid fid attached to fidlist. On umount we dump the fids on the fidlist ~# rmdir /mnt2/test4/ rmdir: failed to remove `/mnt2/test4/': Directory not empty ~# umount /mnt2/ ~# dmesg [ 228.474323] Found fid 3 not clunked Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02net/9p: Implement TXATTRCREATE 9p callAneesh Kumar K.V
TXATTRCREATE: Prepare a fid for setting xattr value on a file system object. size[4] TXATTRCREATE tag[2] fid[4] name[s] attr_size[8] flags[4] size[4] RXATTRCREATE tag[2] txattrcreate gets a fid pointing to xattr. This fid can later be used to set the xattr value. flag value is derived from set Linux setxattr. The manpage says "The flags parameter can be used to refine the semantics of the operation. XATTR_CREATE specifies a pure create, which fails if the named attribute exists already. XATTR_REPLACE specifies a pure replace operation, which fails if the named attribute does not already exist. By default (no flags), the extended attribute will be created if need be, or will simply replace the value if the attribute exists." The actual setxattr operation happens when the fid is clunked. At that point the written byte count and the attr_size specified in TXATTRCREATE should be same otherwise an error will be returned. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02net/9p: Implement attrwalk 9p callAneesh Kumar K.V
TXATTRWALK: Descend a ATTR namespace size[4] TXATTRWALK tag[2] fid[4] newfid[4] name[s] size[4] RXATTRWALK tag[2] size[8] txattrwalk gets a fid pointing to xattr. This fid can later be used to read the xattr value. If name is NULL the fid returned can be used to get the list of extended attribute associated to the file system object. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-05-27 19:43:09 +0000