summaryrefslogtreecommitdiff
path: root/net/ipv4
AgeCommit message (Collapse)Author
2018-01-05tcp_bbr: reset long-term bandwidth sampling on loss recovery undoNeal Cardwell
commit 600647d467c6d04b3954b41a6ee1795b5ae00550 upstream. Fix BBR so that upon notification of a loss recovery undo BBR resets long-term bandwidth sampling. Under high reordering, reordering events can be interpreted as loss. If the reordering and spurious loss estimates are high enough, this can cause BBR to spuriously estimate that we are seeing loss rates high enough to trigger long-term bandwidth estimation. To avoid that problem, this commit resets long-term bandwidth sampling on loss recovery undo events. Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-05tcp_bbr: reset full pipe detection on loss recovery undoNeal Cardwell
commit 2f6c498e4f15d27852c04ed46d804a39137ba364 upstream. Fix BBR so that upon notification of a loss recovery undo BBR resets the full pipe detection (STARTUP exit) state machine. Under high reordering, reordering events can be interpreted as loss. If the reordering and spurious loss estimates are high enough, this could previously cause BBR to spuriously estimate that the pipe is full. Since spurious loss recovery means that our overall sending will have slowed down spuriously, this commit gives a flow more time to probe robustly for bandwidth and decide the pipe is really full. Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02tcp: invalidate rate samples during SACK renegingYousuk Seung
[ Upstream commit d4761754b4fb2ef8d9a1e9d121c4bec84e1fe292 ] Mark tcp_sock during a SACK reneging event and invalidate rate samples while marked. Such rate samples may overestimate bw by including packets that were SACKed before reneging. < ack 6001 win 10000 sack 7001:38001 < ack 7001 win 0 sack 8001:38001 // Reneg detected > seq 7001:8001 // RTO, SACK cleared. < ack 38001 win 10000 In above example the rate sample taken after the last ack will count 7001-38001 as delivered while the actual delivery rate likely could be much lower i.e. 7001-8001. This patch adds a new field tcp_sock.sack_reneg and marks it when we declare SACK reneging and entering TCP_CA_Loss, and unmarks it after the last rate sample was taken before moving back to TCP_CA_Open. This patch also invalidates rate samples taken while tcp_sock.is_sack_reneg is set. Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection") Signed-off-by: Yousuk Seung <ysseung@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02ipv4: Fix use-after-free when flushing FIB tablesIdo Schimmel
[ Upstream commit b4681c2829e24943aadd1a7bb3a30d41d0a20050 ] Since commit 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") the local table uses the same trie allocated for the main table when custom rules are not in use. When a net namespace is dismantled, the main table is flushed and freed (via an RCU callback) before the local table. In case the callback is invoked before the local table is iterated, a use-after-free can occur. Fix this by iterating over the FIB tables in reverse order, so that the main table is always freed after the local table. v3: Reworded comment according to Alex's suggestion. v2: Add a comment to make the fix more explicit per Dave's and Alex's feedback. Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net: ipv4: fix for a race condition in raw_sendmsgMohamed Ghannam
[ Upstream commit 8f659a03a0ba9289b9aeb9b4470e6fb263d6f483 ] inet->hdrincl is racy, and could lead to uninitialized stack pointer usage, so its value should be read only once. Fixes: c008ba5bdc9f ("ipv4: Avoid reading user iov twice after raw_probe_proto_opt") Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02tcp md5sig: Use skb's saddr when replying to an incoming segmentChristoph Paasch
[ Upstream commit 30791ac41927ebd3e75486f9504b6d2280463bf0 ] The MD5-key that belongs to a connection is identified by the peer's IP-address. When we are in tcp_v4(6)_reqsk_send_ack(), we are replying to an incoming segment from tcp_check_req() that failed the seq-number checks. Thus, to find the correct key, we need to use the skb's saddr and not the daddr. This bug seems to have been there since quite a while, but probably got unnoticed because the consequences are not catastrophic. We will call tcp_v4_reqsk_send_ack only to send a challenge-ACK back to the peer, thus the connection doesn't really fail. Fixes: 9501f9722922 ("tcp md5sig: Let the caller pass appropriate key for tcp_v{4,6}_do_calc_md5_hash().") Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02tcp_bbr: record "full bw reached" decision in new full_bw_reached bitNeal Cardwell
[ Upstream commit c589e69b508d29ed8e644dfecda453f71c02ec27 ] This commit records the "full bw reached" decision in a new full_bw_reached bit. This is a pure refactor that does not change the current behavior, but enables subsequent fixes and improvements. In particular, this enables simple and clean fixes because the full_bw and full_bw_cnt can be unconditionally zeroed without worrying about forgetting that we estimated we filled the pipe in Startup. And it enables future improvements because multiple code paths can be used for estimating that we filled the pipe in Startup; any new code paths only need to set this bit when they think the pipe is full. Note that this fix intentionally reduces the width of the full_bw_cnt counter, since we have never used the most significant bit. Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net: igmp: Use correct source address on IGMPv3 reportsKevin Cernekee
[ Upstream commit a46182b00290839fa3fa159d54fd3237bd8669f0 ] Closing a multicast socket after the final IPv4 address is deleted from an interface can generate a membership report that uses the source IP from a different interface. The following test script, run from an isolated netns, reproduces the issue: #!/bin/bash ip link add dummy0 type dummy ip link add dummy1 type dummy ip link set dummy0 up ip link set dummy1 up ip addr add 10.1.1.1/24 dev dummy0 ip addr add 192.168.99.99/24 dev dummy1 tcpdump -U -i dummy0 & socat EXEC:"sleep 2" \ UDP4-DATAGRAM:239.101.1.68:8889,ip-add-membership=239.0.1.68:10.1.1.1 & sleep 1 ip addr del 10.1.1.1/24 dev dummy0 sleep 5 kill %tcpdump RFC 3376 specifies that the report must be sent with a valid IP source address from the destination subnet, or from address 0.0.0.0. Add an extra check to make sure this is the case. Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02ipv4: igmp: guard against silly MTU valuesEric Dumazet
[ Upstream commit b5476022bbada3764609368f03329ca287528dc8 ] IPv4 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in igmp code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv4 minimal MTU. This patch adds missing IPV4_MIN_MTU define, to not abuse ETH_MIN_MTU anymore. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25tcp: fix under-evaluated ssthresh in TCP VegasHoang Tran
[ Upstream commit cf5d74b85ef40c202c76d90959db4d850f301b95 ] With the commit 76174004a0f19785 (tcp: do not slow start when cwnd equals ssthresh), the comparison to the reduced cwnd in tcp_vegas_ssthresh() would under-evaluate the ssthresh. Signed-off-by: Hoang Tran <hoang.tran@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25net: ipconfig: fix ic_close_devs() use-after-freeMark Rutland
[ Upstream commit ffefb6f4d6ad699a2b5484241bc46745a53235d0 ] Our chosen ic_dev may be anywhere in our list of ic_devs, and we may free it before attempting to close others. When we compare d->dev and ic_dev->dev, we're potentially dereferencing memory returned to the allocator. This causes KASAN to scream for each subsequent ic_dev we check. As there's a 1-1 mapping between ic_devs and netdevs, we can instead compare d and ic_dev directly, which implicitly handles the !ic_dev case, and avoids the use-after-free. The ic_dev pointer may be stale, but we will not dereference it. Original splat: [ 6.487446] ================================================================== [ 6.494693] BUG: KASAN: use-after-free in ic_close_devs+0xc4/0x154 at addr ffff800367efa708 [ 6.503013] Read of size 8 by task swapper/0/1 [ 6.507452] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc3-00002-gda42158 #8 [ 6.514993] Hardware name: AppliedMicro Mustang/Mustang, BIOS 3.05.05-beta_rc Jan 27 2016 [ 6.523138] Call trace: [ 6.525590] [<ffff200008094778>] dump_backtrace+0x0/0x570 [ 6.530976] [<ffff200008094d08>] show_stack+0x20/0x30 [ 6.536017] [<ffff200008bee928>] dump_stack+0x120/0x188 [ 6.541231] [<ffff20000856d5e4>] kasan_object_err+0x24/0xa0 [ 6.546790] [<ffff20000856d924>] kasan_report_error+0x244/0x738 [ 6.552695] [<ffff20000856dfec>] __asan_report_load8_noabort+0x54/0x80 [ 6.559204] [<ffff20000aae86ac>] ic_close_devs+0xc4/0x154 [ 6.564590] [<ffff20000aaedbac>] ip_auto_config+0x2ed4/0x2f1c [ 6.570321] [<ffff200008084b04>] do_one_initcall+0xcc/0x370 [ 6.575882] [<ffff20000aa31de8>] kernel_init_freeable+0x5f8/0x6c4 [ 6.581959] [<ffff20000a16df00>] kernel_init+0x18/0x190 [ 6.587171] [<ffff200008084710>] ret_from_fork+0x10/0x40 [ 6.592468] Object at ffff800367efa700, in cache kmalloc-128 size: 128 [ 6.598969] Allocated: [ 6.601324] PID = 1 [ 6.603427] save_stack_trace_tsk+0x0/0x418 [ 6.607603] save_stack_trace+0x20/0x30 [ 6.611430] kasan_kmalloc+0xd8/0x188 [ 6.615087] ip_auto_config+0x8c4/0x2f1c [ 6.619002] do_one_initcall+0xcc/0x370 [ 6.622832] kernel_init_freeable+0x5f8/0x6c4 [ 6.627178] kernel_init+0x18/0x190 [ 6.630660] ret_from_fork+0x10/0x40 [ 6.634223] Freed: [ 6.636233] PID = 1 [ 6.638334] save_stack_trace_tsk+0x0/0x418 [ 6.642510] save_stack_trace+0x20/0x30 [ 6.646337] kasan_slab_free+0x88/0x178 [ 6.650167] kfree+0xb8/0x478 [ 6.653131] ic_close_devs+0x130/0x154 [ 6.656875] ip_auto_config+0x2ed4/0x2f1c [ 6.660875] do_one_initcall+0xcc/0x370 [ 6.664705] kernel_init_freeable+0x5f8/0x6c4 [ 6.669051] kernel_init+0x18/0x190 [ 6.672534] ret_from_fork+0x10/0x40 [ 6.676098] Memory state around the buggy address: [ 6.680880] ffff800367efa600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.688078] ffff800367efa680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 6.695276] >ffff800367efa700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 6.702469] ^ [ 6.705952] ffff800367efa780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 6.713149] ffff800367efa800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 6.720343] ================================================================== [ 6.727536] Disabling lock debugging due to kernel taint Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: David S. Miller <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: James Morris <jmorris@namei.org> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25netfilter: nf_nat_snmp: Fix panic when snmp_trap_helper fails to registerGao Feng
[ Upstream commit 75c689dca98851d65ef5a27e5ce26b625b68751c ] In the commit 93557f53e1fb ("netfilter: nf_conntrack: nf_conntrack snmp helper"), the snmp_helper is replaced by nf_nat_snmp_hook. So the snmp_helper is never registered. But it still tries to unregister the snmp_helper, it could cause the panic. Now remove the useless snmp_helper and the unregister call in the error handler. Fixes: 93557f53e1fb ("netfilter: nf_conntrack: nf_conntrack snmp helper") Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25inet: frag: release spinlock before calling icmp_send()Eric Dumazet
[ Upstream commit ec4fbd64751de18729eaa816ec69e4b504b5a7a2 ] Dmitry reported a lockdep splat [1] (false positive) that we can fix by releasing the spinlock before calling icmp_send() from ip_expire() This is a false positive because sending an ICMP message can not possibly re-enter the IP frag engine. [1] [ INFO: possible circular locking dependency detected ] 4.10.0+ #29 Not tainted ------------------------------------------------------- modprobe/12392 is trying to acquire lock: (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] spin_lock include/linux/spinlock.h:299 [inline] (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] __netif_tx_lock include/linux/netdevice.h:3486 [inline] (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180 but task is already holding lock: (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock include/linux/spinlock.h:299 [inline] (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(&q->lock)->rlock){+.-...}: validate_chain kernel/locking/lockdep.c:2267 [inline] __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:299 [inline] ip_defrag+0x3a2/0x4130 net/ipv4/ip_fragment.c:669 ip_check_defrag+0x4e3/0x8b0 net/ipv4/ip_fragment.c:713 packet_rcv_fanout+0x282/0x800 net/packet/af_packet.c:1459 deliver_skb net/core/dev.c:1834 [inline] dev_queue_xmit_nit+0x294/0xa90 net/core/dev.c:1890 xmit_one net/core/dev.c:2903 [inline] dev_hard_start_xmit+0x16b/0xab0 net/core/dev.c:2923 sch_direct_xmit+0x31f/0x6d0 net/sched/sch_generic.c:182 __dev_xmit_skb net/core/dev.c:3092 [inline] __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358 dev_queue_xmit+0x17/0x20 net/core/dev.c:3423 neigh_resolve_output+0x6b9/0xb10 net/core/neighbour.c:1308 neigh_output include/net/neighbour.h:478 [inline] ip_finish_output2+0x8b8/0x15a0 net/ipv4/ip_output.c:228 ip_do_fragment+0x1d93/0x2720 net/ipv4/ip_output.c:672 ip_fragment.constprop.54+0x145/0x200 net/ipv4/ip_output.c:545 ip_finish_output+0x82d/0xe10 net/ipv4/ip_output.c:314 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404 dst_output include/net/dst.h:486 [inline] ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124 ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492 ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512 raw_sendmsg+0x26de/0x3a00 net/ipv4/raw.c:655 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:761 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x4a3/0x9f0 net/socket.c:1985 __sys_sendmmsg+0x25c/0x750 net/socket.c:2075 SYSC_sendmmsg net/socket.c:2106 [inline] SyS_sendmmsg+0x35/0x60 net/socket.c:2101 do_syscall_64+0x2e8/0x930 arch/x86/entry/common.c:281 return_from_SYSCALL_64+0x0/0x7a -> #0 (_xmit_ETHER#2){+.-...}: check_prev_add kernel/locking/lockdep.c:1830 [inline] check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940 validate_chain kernel/locking/lockdep.c:2267 [inline] __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:299 [inline] __netif_tx_lock include/linux/netdevice.h:3486 [inline] sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180 __dev_xmit_skb net/core/dev.c:3092 [inline] __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358 dev_queue_xmit+0x17/0x20 net/core/dev.c:3423 neigh_hh_output include/net/neighbour.h:468 [inline] neigh_output include/net/neighbour.h:476 [inline] ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228 ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404 dst_output include/net/dst.h:486 [inline] ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124 ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492 ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512 icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394 icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754 ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239 call_timer_fn+0x241/0x820 kernel/time/timer.c:1268 expire_timers kernel/time/timer.c:1307 [inline] __run_timers+0x960/0xcf0 kernel/time/timer.c:1601 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614 __do_softirq+0x31f/0xbe7 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:657 [inline] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707 __read_once_size include/linux/compiler.h:254 [inline] atomic_read arch/x86/include/asm/atomic.h:26 [inline] rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline] __rcu_is_watching kernel/rcu/tree.c:1133 [inline] rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147 rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293 radix_tree_deref_slot include/linux/radix-tree.h:238 [inline] filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335 do_fault_around mm/memory.c:3231 [inline] do_read_fault mm/memory.c:3265 [inline] do_fault+0xbd5/0x2080 mm/memory.c:3370 handle_pte_fault mm/memory.c:3600 [inline] __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714 handle_mm_fault+0x1e2/0x480 mm/memory.c:3751 __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397 do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460 page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&q->lock)->rlock); lock(_xmit_ETHER#2); lock(&(&q->lock)->rlock); lock(_xmit_ETHER#2); *** DEADLOCK *** 10 locks held by modprobe/12392: #0: (&mm->mmap_sem){++++++}, at: [<ffffffff81329758>] __do_page_fault+0x2b8/0xb60 arch/x86/mm/fault.c:1336 #1: (rcu_read_lock){......}, at: [<ffffffff8188cab6>] filemap_map_pages+0x1e6/0x1570 mm/filemap.c:2324 #2: (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>] spin_lock include/linux/spinlock.h:299 [inline] #2: (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>] pte_alloc_one_map mm/memory.c:2944 [inline] #2: (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>] alloc_set_pte+0x13b8/0x1b90 mm/memory.c:3072 #3: (((&q->timer))){+.-...}, at: [<ffffffff81627e72>] lockdep_copy_map include/linux/lockdep.h:175 [inline] #3: (((&q->timer))){+.-...}, at: [<ffffffff81627e72>] call_timer_fn+0x1c2/0x820 kernel/time/timer.c:1258 #4: (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock include/linux/spinlock.h:299 [inline] #4: (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201 #5: (rcu_read_lock){......}, at: [<ffffffff8389a633>] ip_expire+0x1b3/0x6c0 net/ipv4/ip_fragment.c:216 #6: (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] spin_trylock include/linux/spinlock.h:309 [inline] #6: (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] icmp_xmit_lock net/ipv4/icmp.c:219 [inline] #6: (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] icmp_send+0x803/0x1c80 net/ipv4/icmp.c:681 #7: (rcu_read_lock_bh){......}, at: [<ffffffff838ab9a1>] ip_finish_output2+0x2c1/0x15a0 net/ipv4/ip_output.c:198 #8: (rcu_read_lock_bh){......}, at: [<ffffffff836d1dee>] __dev_queue_xmit+0x23e/0x1e60 net/core/dev.c:3324 #9: (dev->qdisc_running_key ?: &qdisc_running_key){+.....}, at: [<ffffffff836d3a27>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3423 stack backtrace: CPU: 0 PID: 12392 Comm: modprobe Not tainted 4.10.0+ #29 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:52 print_circular_bug+0x307/0x3b0 kernel/locking/lockdep.c:1204 check_prev_add kernel/locking/lockdep.c:1830 [inline] check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940 validate_chain kernel/locking/lockdep.c:2267 [inline] __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:299 [inline] __netif_tx_lock include/linux/netdevice.h:3486 [inline] sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180 __dev_xmit_skb net/core/dev.c:3092 [inline] __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358 dev_queue_xmit+0x17/0x20 net/core/dev.c:3423 neigh_hh_output include/net/neighbour.h:468 [inline] neigh_output include/net/neighbour.h:476 [inline] ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228 ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404 dst_output include/net/dst.h:486 [inline] ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124 ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492 ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512 icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394 icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754 ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239 call_timer_fn+0x241/0x820 kernel/time/timer.c:1268 expire_timers kernel/time/timer.c:1307 [inline] __run_timers+0x960/0xcf0 kernel/time/timer.c:1601 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614 __do_softirq+0x31f/0xbe7 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:657 [inline] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707 RIP: 0010:__read_once_size include/linux/compiler.h:254 [inline] RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline] RIP: 0010:rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline] RIP: 0010:__rcu_is_watching kernel/rcu/tree.c:1133 [inline] RIP: 0010:rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147 RSP: 0000:ffff8801c391f120 EFLAGS: 00000a03 ORIG_RAX: ffffffffffffff10 RAX: dffffc0000000000 RBX: ffff8801c391f148 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000055edd4374000 RDI: ffff8801dbe1ae0c RBP: ffff8801c391f1a0 R08: 0000000000000002 R09: 0000000000000000 R10: dffffc0000000000 R11: 0000000000000002 R12: 1ffff10038723e25 R13: ffff8801dbe1ae00 R14: ffff8801c391f680 R15: dffffc0000000000 </IRQ> rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293 radix_tree_deref_slot include/linux/radix-tree.h:238 [inline] filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335 do_fault_around mm/memory.c:3231 [inline] do_read_fault mm/memory.c:3265 [inline] do_fault+0xbd5/0x2080 mm/memory.c:3370 handle_pte_fault mm/memory.c:3600 [inline] __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714 handle_mm_fault+0x1e2/0x480 mm/memory.c:3751 __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397 do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460 page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011 RIP: 0033:0x7f83172f2786 RSP: 002b:00007fffe859ae80 EFLAGS: 00010293 RAX: 000055edd4373040 RBX: 00007f83175111c8 RCX: 000055edd4373238 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007f8317510970 RBP: 00007fffe859afd0 R08: 0000000000000009 R09: 0000000000000000 R10: 0000000000000064 R11: 0000000000000000 R12: 000055edd4373040 R13: 0000000000000000 R14: 00007fffe859afe8 R15: 0000000000000000 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20icmp: don't fail on fragment reassembly time exceededMatteo Croce
[ Upstream commit 258bbb1b0e594ad5f5652cb526b3c63e6a7fad3d ] The ICMP implementation currently replies to an ICMP time exceeded message (type 11) with an ICMP host unreachable message (type 3, code 1). However, time exceeded messages can either represent "time to live exceeded in transit" (code 0) or "fragment reassembly time exceeded" (code 1). Unconditionally replying to "fragment reassembly time exceeded" with host unreachable messages might cause unjustified connection resets which are now easily triggered as UFO has been removed, because, in turn, sending large buffers triggers IP fragmentation. The issue can be easily reproduced by running a lot of UDP streams which is likely to trigger IP fragmentation: # start netserver in the test namespace ip netns add test ip netns exec test netserver # create a VETH pair ip link add name veth0 type veth peer name veth0 netns test ip link set veth0 up ip -n test link set veth0 up for i in $(seq 20 29); do # assign addresses to both ends ip addr add dev veth0 192.168.$i.1/24 ip -n test addr add dev veth0 192.168.$i.2/24 # start the traffic netperf -L 192.168.$i.1 -H 192.168.$i.2 -t UDP_STREAM -l 0 & done # wait send_data: data send error: No route to host (errno 113) netperf: send_omni: send_data failed: No route to host We need to differentiate instead: if fragment reassembly time exceeded is reported, we need to silently drop the packet, if time to live exceeded is reported, maintain the current behaviour. In both cases increment the related error count "icmpInTimeExcds". While at it, fix a typo in a comment, and convert the if statement into a switch to mate it more readable. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16tcp/dccp: block bh before arming time_wait timerEric Dumazet
[ Upstream commit cfac7f836a715b91f08c851df915d401a4d52783 ] Maciej Żenczykowski reported some panics in tcp_twsk_destructor() that might be caused by the following bug. timewait timer is pinned to the cpu, because we want to transition timwewait refcount from 0 to 4 in one go, once everything has been initialized. At the time commit ed2e92394589 ("tcp/dccp: fix timewait races in timer handling") was merged, TCP was always running from BH habdler. After commit 5413d1babe8f ("net: do not block BH while processing socket backlog") we definitely can run tcp_time_wait() from process context. We need to block BH in the critical section so that the pinned timer has still its purpose. This bug is more likely to happen under stress and when very small RTO are used in datacenter flows. Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Acked-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14route: update fnhe_expires for redirect when the fnhe existsXin Long
[ Upstream commit e39d5246111399dbc6e11cd39fd8580191b86c47 ] Now when creating fnhe for redirect, it sets fnhe_expires for this new route cache. But when updating the exist one, it doesn't do it. It will cause this fnhe never to be expired. Paolo already noticed it before, in Jianlin's test case, it became even worse: When ip route flush cache, the old fnhe is not to be removed, but only clean it's members. When redirect comes again, this fnhe will be found and updated, but never be expired due to fnhe_expires not being set. So fix it by simply updating fnhe_expires even it's for redirect. Fixes: aee06da6726d ("ipv4: use seqlock for nh_exceptions") Reported-by: Jianlin Shi <jishi@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14route: also update fnhe_genid when updating a route cacheXin Long
[ Upstream commit cebe84c6190d741045a322f5343f717139993c08 ] Now when ip route flush cache and it turn out all fnhe_genid != genid. If a redirect/pmtu icmp packet comes and the old fnhe is found and all it's members but fnhe_genid will be updated. Then next time when it looks up route and tries to rebind this fnhe to the new dst, the fnhe will be flushed due to fnhe_genid != genid. It causes this redirect/pmtu icmp packet acutally not to be applied. This patch is to also reset fnhe_genid when updating a route cache. Fixes: 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions") Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14netfilter: don't track fragmented packetsFlorian Westphal
[ Upstream commit 7b4fdf77a450ec0fdcb2f677b080ddbf2c186544 ] Andrey reports syzkaller splat caused by NF_CT_ASSERT(!ip_is_fragment(ip_hdr(skb))); in ipv4 nat. But this assertion (and the comment) are wrong, this function does see fragments when IP_NODEFRAG setsockopt is used. As conntrack doesn't track packets without complete l4 header, only the first fragment is tracked. Because applying nat to first packet but not the rest makes no sense this also turns off tracking of all fragments. Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09tcp: correct memory barrier usage in tcp_check_space()Jason Baron
[ Upstream commit 56d806222ace4c3aeae516cd7a855340fb2839d8 ] sock_reset_flag() maps to __clear_bit() not the atomic version clear_bit(). Thus, we need smp_mb(), smp_mb__after_atomic() is not sufficient. Fixes: 3c7151275c0c ("tcp: add memory barriers to write space paths") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Jason Baron <jbaron@akamai.com> Acked-by: Eric Dumazet <edumazet@google.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30net: Allow IP_MULTICAST_IF to set index to L3 slaveDavid Ahern
[ Upstream commit 7bb387c5ab12aeac3d5eea28686489ff46b53ca9 ] IP_MULTICAST_IF fails if sk_bound_dev_if is already set and the new index does not match it. e.g., ntpd[15381]: setsockopt IP_MULTICAST_IF 192.168.1.23 fails: Invalid argument Relax the check in setsockopt to allow setting mc_index to an L3 slave if sk_bound_dev_if points to an L3 master. Make a similar change for IPv6. In this case change the device lookup to take the rcu_read_lock avoiding a refcnt. The rcu lock is also needed for the lookup of a potential L3 master device. This really only silences a setsockopt failure since uses of mc_index are secondary to sk_bound_dev_if if it is set. In both cases, if either index is an L3 slave or master, lookups are directed to the same FIB table so relaxing the check at setsockopt time causes no harm. Patch is based on a suggested change by Darwin for a problem noted in their code base. Suggested-by: Darwin Dingel <darwin.dingel@alliedtelesis.co.nz> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24tcp: do not mangle skb->cb[] in tcp_make_synack()Eric Dumazet
[ Upstream commit 3b11775033dc87c3d161996c54507b15ba26414a ] Christoph Paasch sent a patch to address the following issue : tcp_make_synack() is leaving some TCP private info in skb->cb[], then send the packet by other means than tcp_transmit_skb() tcp_transmit_skb() makes sure to clear skb->cb[] to not confuse IPv4/IPV6 stacks, but we have no such cleanup for SYNACK. tcp_make_synack() should not use tcp_init_nondata_skb() : tcp_init_nondata_skb() really should be limited to skbs put in write/rtx queues (the ones that are only sent via tcp_transmit_skb()) This patch fixes the issue and should even save few cpu cycles ;) Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24tcp_nv: fix division by zero in tcpnv_acked()Konstantin Khlebnikov
[ Upstream commit 4eebff27ca4182bbf5f039dd60d79e2d7c0a707e ] Average RTT could become zero. This happened in real life at least twice. This patch treats zero as 1us. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Lawrence Brakmo <Brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21tcp: provide timestamps for partial writesSoheil Hassas Yeganeh
[ Upstream commit ad02c4f547826167a709dab8a89a1caefd2c1f50 ] For TCP sockets, TX timestamps are only captured when the user data is successfully and fully written to the socket. In many cases, however, TCP writes can be partial for which no timestamp is collected. Collect timestamps whenever any user data is (fully or partially) copied into the socket. Pass tcp_write_queue_tail to tcp_tx_timestamp instead of the local skb pointer since it can be set to NULL on the error path. Note that tcp_write_queue_tail can be NULL, even if bytes have been copied to the socket. This is because acknowledgements are being processed in tcp_sendmsg(), and by the time tcp_tx_timestamp is called tcp_write_queue_tail can be NULL. For such cases, this patch does not collect any timestamps (i.e., it is best-effort). This patch is written with suggestions from Willem de Bruijn and Eric Dumazet. Change-log V1 -> V2: - Use sockc.tsflags instead of sk->sk_tsflags. - Use the same code path for normal writes and errors. Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18ipip: only increase err_count for some certain type icmp in ipip_errXin Long
[ Upstream commit f3594f0a7ea36661d7fd942facd7f31a64245f1a ] t->err_count is used to count the link failure on tunnel and an err will be reported to user socket in tx path if t->err_count is not 0. udp socket could even return EHOSTUNREACH to users. Since commit fd58156e456d ("IPIP: Use ip-tunneling code.") removed the 'switch check' for icmp type in ipip_err(), err_count would be increased by the icmp packet with ICMP_EXC_FRAGTIME code. an link failure would be reported out due to this. In Jianlin's case, when receiving ICMP_EXC_FRAGTIME a icmp packet, udp netperf failed with the err: send_data: data send error: No route to host (errno 113) We expect this error reported from tunnel to socket when receiving some certain type icmp, but not ICMP_EXC_FRAGTIME, ICMP_SR_FAILED or ICMP_PARAMETERPROB ones. This patch is to bring 'switch check' for icmp type back to ipip_err so that it only reports link failure for the right type icmp, just as in ipgre_err() and ipip6_err(). Fixes: fd58156e456d ("IPIP: Use ip-tunneling code.") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18tcp/dccp: fix other lockdep splats accessing ireq_optEric Dumazet
[ Upstream commit 06f877d613be3621604c2520ec0351d9fbdca15f ] In my first attempt to fix the lockdep splat, I forgot we could enter inet_csk_route_req() with a freshly allocated request socket, for which refcount has not yet been elevated, due to complex SLAB_TYPESAFE_BY_RCU rules. We either are in rcu_read_lock() section _or_ we own a refcount on the request. Correct RCU verb to use here is rcu_dereference_check(), although it is not possible to prove we actually own a reference on a shared refcount :/ In v2, I added ireq_opt_deref() helper and use in three places, to fix other possible splats. [ 49.844590] lockdep_rcu_suspicious+0xea/0xf3 [ 49.846487] inet_csk_route_req+0x53/0x14d [ 49.848334] tcp_v4_route_req+0xe/0x10 [ 49.850174] tcp_conn_request+0x31c/0x6a0 [ 49.851992] ? __lock_acquire+0x614/0x822 [ 49.854015] tcp_v4_conn_request+0x5a/0x79 [ 49.855957] ? tcp_v4_conn_request+0x5a/0x79 [ 49.858052] tcp_rcv_state_process+0x98/0xdcc [ 49.859990] ? sk_filter_trim_cap+0x2f6/0x307 [ 49.862085] tcp_v4_do_rcv+0xfc/0x145 [ 49.864055] ? tcp_v4_do_rcv+0xfc/0x145 [ 49.866173] tcp_v4_rcv+0x5ab/0xaf9 [ 49.868029] ip_local_deliver_finish+0x1af/0x2e7 [ 49.870064] ip_local_deliver+0x1b2/0x1c5 [ 49.871775] ? inet_del_offload+0x45/0x45 [ 49.873916] ip_rcv_finish+0x3f7/0x471 [ 49.875476] ip_rcv+0x3f1/0x42f [ 49.876991] ? ip_local_deliver_finish+0x2e7/0x2e7 [ 49.878791] __netif_receive_skb_core+0x6d3/0x950 [ 49.880701] ? process_backlog+0x7e/0x216 [ 49.882589] __netif_receive_skb+0x1d/0x5e [ 49.884122] process_backlog+0x10c/0x216 [ 49.885812] net_rx_action+0x147/0x3df Fixes: a6ca7abe53633 ("tcp/dccp: fix lockdep splat in inet_csk_route_req()") Fixes: c92e8c02fe66 ("tcp/dccp: fix ireq->opt races") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: kernel test robot <fengguang.wu@intel.com> Reported-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18tcp/dccp: fix lockdep splat in inet_csk_route_req()Eric Dumazet
[ Upstream commit a6ca7abe53633d08eea1c6756cb49c9b2d4c90bf ] This patch fixes the following lockdep splat in inet_csk_route_req() lockdep_rcu_suspicious inet_csk_route_req tcp_v4_send_synack tcp_rtx_synack inet_rtx_syn_ack tcp_fastopen_synack_time tcp_retransmit_timer tcp_write_timer_handler tcp_write_timer call_timer_fn Thread running inet_csk_route_req() owns a reference on the request socket, so we have the guarantee ireq->ireq_opt wont be changed or freed. lockdep can enforce this invariant for us. Fixes: c92e8c02fe66 ("tcp/dccp: fix ireq->opt races") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18soreuseport: fix initialization raceCraig Gallek
[ Upstream commit 1b5f962e71bfad6284574655c406597535c3ea7a ] Syzkaller stumbled upon a way to trigger WARNING: CPU: 1 PID: 13881 at net/core/sock_reuseport.c:41 reuseport_alloc+0x306/0x3b0 net/core/sock_reuseport.c:39 There are two initialization paths for the sock_reuseport structure in a socket: Through the udp/tcp bind paths of SO_REUSEPORT sockets or through SO_ATTACH_REUSEPORT_[CE]BPF before bind. The existing implementation assumedthat the socket lock protected both of these paths when it actually only protects the SO_ATTACH_REUSEPORT path. Syzkaller triggered this double allocation by running these paths concurrently. This patch moves the check for double allocation into the reuseport_alloc function which is protected by a global spin lock. Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection") Fixes: c125e80b8868 ("soreuseport: fast reuseport TCP socket selection") Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18tcp/dccp: fix ireq->opt racesEric Dumazet
[ Upstream commit c92e8c02fe664155ac4234516e32544bec0f113d ] syzkaller found another bug in DCCP/TCP stacks [1] For the reasons explained in commit ce1050089c96 ("tcp/dccp: fix ireq->pktopts race"), we need to make sure we do not access ireq->opt unless we own the request sock. Note the opt field is renamed to ireq_opt to ease grep games. [1] BUG: KASAN: use-after-free in ip_queue_xmit+0x1687/0x18e0 net/ipv4/ip_output.c:474 Read of size 1 at addr ffff8801c951039c by task syz-executor5/3295 CPU: 1 PID: 3295 Comm: syz-executor5 Not tainted 4.14.0-rc4+ #80 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:427 ip_queue_xmit+0x1687/0x18e0 net/ipv4/ip_output.c:474 tcp_transmit_skb+0x1ab7/0x3840 net/ipv4/tcp_output.c:1135 tcp_send_ack.part.37+0x3bb/0x650 net/ipv4/tcp_output.c:3587 tcp_send_ack+0x49/0x60 net/ipv4/tcp_output.c:3557 __tcp_ack_snd_check+0x2c6/0x4b0 net/ipv4/tcp_input.c:5072 tcp_ack_snd_check net/ipv4/tcp_input.c:5085 [inline] tcp_rcv_state_process+0x2eff/0x4850 net/ipv4/tcp_input.c:6071 tcp_child_process+0x342/0x990 net/ipv4/tcp_minisocks.c:816 tcp_v4_rcv+0x1827/0x2f80 net/ipv4/tcp_ipv4.c:1682 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x40c341 RSP: 002b:00007f469523ec10 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 000000000040c341 RDX: 0000000000000037 RSI: 0000000020004000 RDI: 0000000000000015 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000f4240 R11: 0000000000000293 R12: 00000000004b7fd1 R13: 00000000ffffffff R14: 0000000020000000 R15: 0000000000025000 Allocated by task 3295: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 __do_kmalloc mm/slab.c:3725 [inline] __kmalloc+0x162/0x760 mm/slab.c:3734 kmalloc include/linux/slab.h:498 [inline] tcp_v4_save_options include/net/tcp.h:1962 [inline] tcp_v4_init_req+0x2d3/0x3e0 net/ipv4/tcp_ipv4.c:1271 tcp_conn_request+0xf6d/0x3410 net/ipv4/tcp_input.c:6283 tcp_v4_conn_request+0x157/0x210 net/ipv4/tcp_ipv4.c:1313 tcp_rcv_state_process+0x8ea/0x4850 net/ipv4/tcp_input.c:5857 tcp_v4_do_rcv+0x55c/0x7d0 net/ipv4/tcp_ipv4.c:1482 tcp_v4_rcv+0x2d10/0x2f80 net/ipv4/tcp_ipv4.c:1711 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 3306: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kfree+0xca/0x250 mm/slab.c:3820 inet_sock_destruct+0x59d/0x950 net/ipv4/af_inet.c:157 __sk_destruct+0xfd/0x910 net/core/sock.c:1560 sk_destruct+0x47/0x80 net/core/sock.c:1595 __sk_free+0x57/0x230 net/core/sock.c:1603 sk_free+0x2a/0x40 net/core/sock.c:1614 sock_put include/net/sock.h:1652 [inline] inet_csk_complete_hashdance+0xd5/0xf0 net/ipv4/inet_connection_sock.c:959 tcp_check_req+0xf4d/0x1620 net/ipv4/tcp_minisocks.c:765 tcp_v4_rcv+0x17f6/0x2f80 net/ipv4/tcp_ipv4.c:1675 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets") Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18tcp: fix tcp_mtu_probe() vs highest_sackEric Dumazet
[ Upstream commit 2b7cda9c35d3b940eb9ce74b30bbd5eb30db493d ] Based on SNMP values provided by Roman, Yuchung made the observation that some crashes in tcp_sacktag_walk() might be caused by MTU probing. Looking at tcp_mtu_probe(), I found that when a new skb was placed in front of the write queue, we were not updating tcp highest sack. If one skb is freed because all its content was copied to the new skb (for MTU probing), then tp->highest_sack could point to a now freed skb. Bad things would then happen, including infinite loops. This patch renames tcp_highest_sack_combine() and uses it from tcp_mtu_probe() to fix the bug. Note that I also removed one test against tp->sacked_out, since we want to replace tp->highest_sack regardless of whatever condition, since keeping a stale pointer to freed skb is a recipe for disaster. Fixes: a47e5a988a57 ("[TCP]: Convert highest_sack to sk_buff to allow direct access") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Reported-by: Roman Gushchin <guro@fb.com> Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18gso: fix payload length when gso_size is zeroAlexey Kodanev
[ Upstream commit 3d0241d57c7b25bb75ac9d7a62753642264fdbce ] When gso_size reset to zero for the tail segment in skb_segment(), later in ipv6_gso_segment(), __skb_udp_tunnel_segment() and gre_gso_segment() we will get incorrect results (payload length, pcsum) for that segment. inet_gso_segment() already has a check for gso_size before calculating payload. The issue was found with LTP vxlan & gre tests over ixgbe NIC. Fixes: 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15IPsec: do not ignore crypto err in ah4 inputGilad Ben-Yossef
[ Upstream commit ebd89a2d0675f1325c2be5b7576fd8cb7e8defd0 ] ah4 input processing uses the asynchronous hash crypto API which supplies an error code as part of the operation completion but the error code was being ignored. Treat a crypto API error indication as a verification failure. While a crypto API reported error would almost certainly result in a memcpy of the digest failing anyway and thus the security risk seems minor, performing a memory compare on what might be uninitialized memory is wrong. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12vti: fix use after free in vti_tunnel_xmit/vti6_tnl_xmitAlexey Kodanev
[ Upstream commit 36f6ee22d2d66046e369757ec6bbe1c482957ba6 ] When running LTP IPsec tests, KASan might report: BUG: KASAN: use-after-free in vti_tunnel_xmit+0xeee/0xff0 [ip_vti] Read of size 4 at addr ffff880dc6ad1980 by task swapper/0/0 ... Call Trace: <IRQ> dump_stack+0x63/0x89 print_address_description+0x7c/0x290 kasan_report+0x28d/0x370 ? vti_tunnel_xmit+0xeee/0xff0 [ip_vti] __asan_report_load4_noabort+0x19/0x20 vti_tunnel_xmit+0xeee/0xff0 [ip_vti] ? vti_init_net+0x190/0x190 [ip_vti] ? save_stack_trace+0x1b/0x20 ? save_stack+0x46/0xd0 dev_hard_start_xmit+0x147/0x510 ? icmp_echo.part.24+0x1f0/0x210 __dev_queue_xmit+0x1394/0x1c60 ... Freed by task 0: save_stack_trace+0x1b/0x20 save_stack+0x46/0xd0 kasan_slab_free+0x70/0xc0 kmem_cache_free+0x81/0x1e0 kfree_skbmem+0xb1/0xe0 kfree_skb+0x75/0x170 kfree_skb_list+0x3e/0x60 __dev_queue_xmit+0x1298/0x1c60 dev_queue_xmit+0x10/0x20 neigh_resolve_output+0x3a8/0x740 ip_finish_output2+0x5c0/0xe70 ip_finish_output+0x4ba/0x680 ip_output+0x1c1/0x3a0 xfrm_output_resume+0xc65/0x13d0 xfrm_output+0x1e4/0x380 xfrm4_output_finish+0x5c/0x70 Can be fixed if we get skb->len before dst_output(). Fixes: b9959fd3b0fa ("vti: switch to new ip tunnel code") Fixes: 22e1b23dafa8 ("vti6: Support inter address family tunneling.") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12tcp: fastopen: fix on syn-data transmit failureEric Dumazet
[ Upstream commit b5b7db8d680464b1d631fd016f5e093419f0bfd9 ] Our recent change exposed a bug in TCP Fastopen Client that syzkaller found right away [1] When we prepare skb with SYN+DATA, we attempt to transmit it, and we update socket state as if the transmit was a success. In socket RTX queue we have two skbs, one with the SYN alone, and a second one containing the DATA. When (malicious) ACK comes in, we now complain that second one had no skb_mstamp. The proper fix is to make sure that if the transmit failed, we do not pretend we sent the DATA skb, and make it our send_head. When 3WHS completes, we can now send the DATA right away, without having to wait for a timeout. [1] WARNING: CPU: 0 PID: 100189 at net/ipv4/tcp_input.c:3117 tcp_clean_rtx_queue+0x2057/0x2ab0 net/ipv4/tcp_input.c:3117() WARN_ON_ONCE(last_ackt == 0); Modules linked in: CPU: 0 PID: 100189 Comm: syz-executor1 Not tainted Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 0000000000000000 ffff8800b35cb1d8 ffffffff81cad00d 0000000000000000 ffffffff828a4347 ffff88009f86c080 ffffffff8316eb20 0000000000000d7f ffff8800b35cb220 ffffffff812c33c2 ffff8800baad2440 00000009d46575c0 Call Trace: [<ffffffff81cad00d>] __dump_stack [<ffffffff81cad00d>] dump_stack+0xc1/0x124 [<ffffffff812c33c2>] warn_slowpath_common+0xe2/0x150 [<ffffffff812c361e>] warn_slowpath_null+0x2e/0x40 [<ffffffff828a4347>] tcp_clean_rtx_queue+0x2057/0x2ab0 n [<ffffffff828ae6fd>] tcp_ack+0x151d/0x3930 [<ffffffff828baa09>] tcp_rcv_state_process+0x1c69/0x4fd0 [<ffffffff828efb7f>] tcp_v4_do_rcv+0x54f/0x7c0 [<ffffffff8258aacb>] sk_backlog_rcv [<ffffffff8258aacb>] __release_sock+0x12b/0x3a0 [<ffffffff8258ad9e>] release_sock+0x5e/0x1c0 [<ffffffff8294a785>] inet_wait_for_connect [<ffffffff8294a785>] __inet_stream_connect+0x545/0xc50 [<ffffffff82886f08>] tcp_sendmsg_fastopen [<ffffffff82886f08>] tcp_sendmsg+0x2298/0x35a0 [<ffffffff82952515>] inet_sendmsg+0xe5/0x520 [<ffffffff8257152f>] sock_sendmsg_nosec [<ffffffff8257152f>] sock_sendmsg+0xcf/0x110 Fixes: 8c72c65b426b ("tcp: update skb->skb_mstamp more carefully") Fixes: 783237e8daf1 ("net-tcp: Fast Open client - sending SYN-data") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12tcp: fix data delivery rateEric Dumazet
[ Upstream commit fc22579917eb7e13433448a342f1cb1592920940 ] Now skb->mstamp_skb is updated later, we also need to call tcp_rate_skb_sent() after the update is done. Fixes: 8c72c65b426b ("tcp: update skb->skb_mstamp more carefully") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12tcp: update skb->skb_mstamp more carefullyEric Dumazet
[ Upstream commit 8c72c65b426b47b3c166a8fef0d8927fe5e8a28d ] liujian reported a problem in TCP_USER_TIMEOUT processing with a patch in tcp_probe_timer() : https://www.spinics.net/lists/netdev/msg454496.html After investigations, the root cause of the problem is that we update skb->skb_mstamp of skbs in write queue, even if the attempt to send a clone or copy of it failed. One reason being a routing problem. This patch prevents this, solving liujian issue. It also removes a potential RTT miscalculation, since __tcp_retransmit_skb() is not OR-ing TCP_SKB_CB(skb)->sacked with TCPCB_EVER_RETRANS if a failure happens, but skb->skb_mstamp has been changed. A future ACK would then lead to a very small RTT sample and min_rtt would then be lowered to this too small value. Tested: # cat user_timeout.pkt --local_ip=192.168.102.64 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 `ifconfig tun0 192.168.102.64/16; ip ro add 192.0.2.1 dev tun0` +0 < S 0:0(0) win 0 <mss 1460> +0 > S. 0:0(0) ack 1 <mss 1460> +.1 < . 1:1(0) ack 1 win 65530 +0 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_USER_TIMEOUT, [3000], 4) = 0 +0 write(4, ..., 24) = 24 +0 > P. 1:25(24) ack 1 win 29200 +.1 < . 1:1(0) ack 25 win 65530 //change the ipaddress +1 `ifconfig tun0 192.168.0.10/16` +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +0 `ifconfig tun0 192.168.102.64/16` +0 < . 1:2(1) ack 25 win 65530 +0 `ifconfig tun0 192.168.0.10/16` +3 write(4, ..., 24) = -1 # ./packetdrill user_timeout.pkt Signed-off-by: Eric Dumazet <edumazet@googl.com> Reported-by: liujian <liujian56@huawei.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08netfilter: invoke synchronize_rcu after set the _hook_ to NULLLiping Zhang
[ Upstream commit 3b7dabf029478bb80507a6c4500ca94132a2bc0b ] Otherwise, another CPU may access the invalid pointer. For example: CPU0 CPU1 - rcu_read_lock(); - pfunc = _hook_; _hook_ = NULL; - mod unload - - pfunc(); // invalid, panic - rcu_read_unlock(); So we must call synchronize_rcu() to wait the rcu reader to finish. Also note, in nf_nat_snmp_basic_fini, synchronize_rcu() will be invoked by later nf_conntrack_helper_unregister, but I'm inclined to add a explicit synchronize_rcu after set the nf_nat_snmp_hook to NULL. Depend on such obscure assumptions is not a good idea. Last, in nfnetlink_cttimeout, we use kfree_rcu to free the time object, so in cttimeout_exit, invoking rcu_barrier() is not necessary at all, remove it too. Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08udp: disable inner UDP checksum offloads in IPsec caseAnsis Atteka
[ Upstream commit b40c5f4fde22fb98eff205b3aece05b471c24eed ] Otherwise, UDP checksum offloads could corrupt ESP packets by attempting to calculate UDP checksum when this inner UDP packet is already protected by IPsec. One way to reproduce this bug is to have a VM with virtio_net driver (UFO set to ON in the guest VM); and then encapsulate all guest's Ethernet frames in Geneve; and then further encrypt Geneve with IPsec. In this case following symptoms are observed: 1. If using ixgbe NIC, then it will complain with following error message: ixgbe 0000:01:00.1: partial checksum but l4 proto=32! 2. Receiving IPsec stack will drop all the corrupted ESP packets and increase XfrmInStateProtoError counter in /proc/net/xfrm_stat. 3. iperf UDP test from the VM with packet sizes above MTU will not work at all. 4. iperf TCP test from the VM will get ridiculously low performance because. Signed-off-by: Ansis Atteka <aatteka@ovn.org> Co-authored-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20ip_tunnel: fix setting ttl and tos value in collect_md modeHaishuang Yan
[ Upstream commit 0f693f1995cf002432b70f43ce73f79bf8d0b6c9 ] ttl and tos variables are declared and assigned, but are not used in iptunnel_xmit() function. Fixes: cfc7381b3002 ("ip_tunnel: add collect_md mode to IPIP tunnel") Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20Revert "net: fix percpu memory leaks"Jesper Dangaard Brouer
[ Upstream commit 5a63643e583b6a9789d7a225ae076fb4e603991c ] This reverts commit 1d6119baf0610f813eb9d9580eb4fd16de5b4ceb. After reverting commit 6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting") then here is no need for this fix-up patch. As percpu_counter is no longer used, it cannot memory leak it any-longer. Fixes: 6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting") Fixes: 1d6119baf061 ("net: fix percpu memory leaks") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20Revert "net: use lib/percpu_counter API for fragmentation mem accounting"Jesper Dangaard Brouer
[ Upstream commit fb452a1aa3fd4034d7999e309c5466ff2d7005aa ] This reverts commit 6d7b857d541ecd1d9bd997c97242d4ef94b19de2. There is a bug in fragmentation codes use of the percpu_counter API, that can cause issues on systems with many CPUs. The frag_mem_limit() just reads the global counter (fbc->count), without considering other CPUs can have upto batch size (130K) that haven't been subtracted yet. Due to the 3MBytes lower thresh limit, this become dangerous at >=24 CPUs (3*1024*1024/130000=24). The correct API usage would be to use __percpu_counter_compare() which does the right thing, and takes into account the number of (online) CPUs and batch size, to account for this and call __percpu_counter_sum() when needed. We choose to revert the use of the lib/percpu_counter API for frag memory accounting for several reasons: 1) On systems with CPUs > 24, the heavier fully locked __percpu_counter_sum() is always invoked, which will be more expensive than the atomic_t that is reverted to. Given systems with more than 24 CPUs are becoming common this doesn't seem like a good option. To mitigate this, the batch size could be decreased and thresh be increased. 2) The add_frag_mem_limit+sub_frag_mem_limit pairs happen on the RX CPU, before SKBs are pushed into sockets on remote CPUs. Given NICs can only hash on L2 part of the IP-header, the NIC-RXq's will likely be limited. Thus, a fair chance that atomic add+dec happen on the same CPU. Revert note that commit 1d6119baf061 ("net: fix percpu memory leaks") removed init_frag_mem_limit() and instead use inet_frags_init_net(). After this revert, inet_frags_uninit_net() becomes empty. Fixes: 6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting") Fixes: 1d6119baf061 ("net: fix percpu memory leaks") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0Wei Wang
[ Upstream commit 499350a5a6e7512d9ed369ed63a4244b6536f4f8 ] When tcp_disconnect() is called, inet_csk_delack_init() sets icsk->icsk_ack.rcv_mss to 0. This could potentially cause tcp_recvmsg() => tcp_cleanup_rbuf() => __tcp_select_window() call path to have division by 0 issue. So this patch initializes rcv_mss to TCP_MIN_MSS instead of 0. Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30tcp: when rearming RTO, if RTO time is in past then fire RTO ASAPNeal Cardwell
[ Upstream commit cdbeb633ca71a02b7b63bfeb94994bf4e1a0b894 ] In some situations tcp_send_loss_probe() can realize that it's unable to send a loss probe (TLP), and falls back to calling tcp_rearm_rto() to schedule an RTO timer. In such cases, sometimes tcp_rearm_rto() realizes that the RTO was eligible to fire immediately or at some point in the past (delta_us <= 0). Previously in such cases tcp_rearm_rto() was scheduling such "overdue" RTOs to happen at now + icsk_rto, which caused needless delays of hundreds of milliseconds (and non-linear behavior that made reproducible testing difficult). This commit changes the logic to schedule "overdue" RTOs ASAP, rather than at now + icsk_rto. Fixes: 6ba8a3b19e76 ("tcp: Tail loss probe (TLP)") Suggested-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30ipv4: better IP_MAX_MTU enforcementEric Dumazet
[ Upstream commit c780a049f9bf442314335372c9abc4548bfe3e44 ] While working on yet another syzkaller report, I found that our IP_MAX_MTU enforcements were not properly done. gcc seems to reload dev->mtu for min(dev->mtu, IP_MAX_MTU), and final result can be bigger than IP_MAX_MTU :/ This is a problem because device mtu can be changed on other cpus or threads. While this patch does not fix the issue I am working on, it is probably worth addressing it. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30ipv4: fix NULL dereference in free_fib_info_rcu()Eric Dumazet
[ Upstream commit 187e5b3ac84d3421d2de3aca949b2791fbcad554 ] If fi->fib_metrics could not be allocated in fib_create_info() we attempt to dereference a NULL pointer in free_fib_info_rcu() : m = fi->fib_metrics; if (m != &dst_default_metrics && atomic_dec_and_test(&m->refcnt)) kfree(m); Before my recent patch, we used to call kfree(NULL) and nothing wrong happened. Instead of using RCU to defer freeing while we are under memory stress, it seems better to take immediate action. This was reported by syzkaller team. Fixes: 3fb07daff8e9 ("ipv4: add reference counting to metrics") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-12udp: consistently apply ufo or fragmentationWillem de Bruijn
[ Upstream commit 85f1bd9a7b5a79d5baa8bf44af19658f7bf77bfa ] When iteratively building a UDP datagram with MSG_MORE and that datagram exceeds MTU, consistently choose UFO or fragmentation. Once skb_is_gso, always apply ufo. Conversely, once a datagram is split across multiple skbs, do not consider ufo. Sendpage already maintains the first invariant, only add the second. IPv6 does not have a sendpage implementation to modify. A gso skb must have a partial checksum, do not follow sk_no_check_tx in udp_send_skb. Found by syzkaller. Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-12revert "ipv4: Should use consistent conditional judgement for ip fragment in ↵Greg Kroah-Hartman
__ip_append_data and ip_finish_output" This reverts commit f102bb7164c9020e12662998f0fd99c3be72d4f6 which is commit 0a28cfd51e17f4f0a056bcf66bfbe492c3b99f38 upstream as there is another patch that needs to be applied instead of this one. Cc: Zheng Li <james.z.li@ericsson.com> Cc: David S. Miller <davem@davemloft.net> Cc: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-12revert "net: account for current skb length when deciding about UFO"Greg Kroah-Hartman
This reverts commit ef09c9ff343122a0b245416066992d096416ff19 which is commit a5cb659bbc1c8644efa0c3138a757a1e432a4880 upstream as it causes merge issues with later patches that are much more important... Cc: Michal Kubecek <mkubecek@suse.cz> Cc: Vlad Yasevich <vyasevic@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-12igmp: Fix regression caused by igmp sysctl namespace code.Nikolay Borisov
[ Upstream commit 1714020e42b17135032c8606f7185b3fb2ba5d78 ] Commit dcd87999d415 ("igmp: net: Move igmp namespace init to correct file") moved the igmp sysctls initialization from tcp_sk_init to igmp_net_init. This function is only called as part of per-namespace initialization, only if CONFIG_IP_MULTICAST is defined, otherwise igmp_mc_init() call in ip_init is compiled out, casuing the igmp pernet ops to not be registerd and those sysctl being left initialized with 0. However, there are certain functions, such as ip_mc_join_group which are always compiled and make use of some of those sysctls. Let's do a partial revert of the aforementioned commit and move the sysctl initialization into inet_init_net, that way they will always have sane values. Fixes: dcd87999d415 ("igmp: net: Move igmp namespace init to correct file") Link: https://bugzilla.kernel.org/show_bug.cgi?id=196595 Reported-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-12net: avoid skb_warn_bad_offload false positives on UFOWillem de Bruijn
[ Upstream commit 8d63bee643f1fb53e472f0e135cae4eb99d62d19 ] skb_warn_bad_offload triggers a warning when an skb enters the GSO stack at __skb_gso_segment that does not have CHECKSUM_PARTIAL checksum offload set. Commit b2504a5dbef3 ("net: reduce skb_warn_bad_offload() noise") observed that SKB_GSO_DODGY producers can trigger the check and that passing those packets through the GSO handlers will fix it up. But, the software UFO handler will set ip_summed to CHECKSUM_NONE. When __skb_gso_segment is called from the receive path, this triggers the warning again. Make UFO set CHECKSUM_UNNECESSARY instead of CHECKSUM_NONE. On Tx these two are equivalent. On Rx, this better matches the skb state (checksum computed), as CHECKSUM_NONE here means no checksum computed. See also this thread for context: http://patchwork.ozlabs.org/patch/799015/ Fixes: b2504a5dbef3 ("net: reduce skb_warn_bad_offload() noise") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-12tcp: fastopen: tcp_connect() must refresh the routeEric Dumazet
[ Upstream commit 8ba60924710cde564a3905588b6219741d6356d0 ] With new TCP_FASTOPEN_CONNECT socket option, there is a possibility to call tcp_connect() while socket sk_dst_cache is either NULL or invalid. +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 4 +0 fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 setsockopt(4, SOL_TCP, TCP_FASTOPEN_CONNECT, [1], 4) = 0 +0 connect(4, ..., ...) = 0 << sk->sk_dst_cache becomes obsolete, or even set to NULL >> +1 sendto(4, ..., 1000, MSG_FASTOPEN, ..., ...) = 1000 We need to refresh the route otherwise bad things can happen, especially when syzkaller is running on the host :/ Fixes: 19f6d3f3c8422 ("net/tcp-fastopen: Add new API support") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Wei Wang <weiwan@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-05-14 12:12:00 +0000