summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-03-27MLK-20546-2: drm/imx/dcss: check status bit when handling interruptsLaurentiu Palcu
Double check that the DTG IRQ STATUS register bit is set when handling the vblank and CTXLD kick interrupts to make sure we avoid spurious interrupts and kick the CTXLD in a bad moment. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com> Reviewed-by: Robert Chiras <robert.chiras@nxp.com> (cherry picked from commit cc56e4e07f623d0b831e0f8347f2f3198697ee20)
2019-03-27MLK-21150-4 drm/bridge: sec-dsim: a general way to compute PLL PMSFancy Fang
A fixed PLL PMS setting for attached panel is obviously not enough for any other mipi panel which needs a different PLL output clock frequency, and besides, for the CEA-861 standard display modes, the 'pll_pms' table also can not cover all the modes requirements. So a general way is created to solve this problem which can provide an optimum solution to output a PLL bit clock to match the request frequency in a maximum degree and also satisfy the input clock and intermediate clocks limit according to the PLL specification. Signed-off-by: Fancy Fang <chen.fang@nxp.com> (cherry picked from commit a73fdd5e48fe0df47685cfc197fe66edc1e28405)
2019-03-11MLK-21051 dt-bindings: pinctrl: Sync SCFW header to commit ef4a5057Leonard Crestez
Replace manually added pads with defines from SCFW export package. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> (cherry picked from commit 21dc9c9834783b13999fcdd1d9dbe50c4ae730ae)
2019-03-11MLK-20958-1 imx8: Sync SCFW API to v1.4Leonard Crestez
Many whitespace and formatting changes were skipped Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 0a5c751a39c4a79f209df199a13b7095e35c1f09)
2019-03-05MLK-20718-1: clk: imx8qm: Add DSI phy_ref clockRobert Chiras
Add the missing clocks for the DSI PHY_REF: IMX8QM_MIPI0_DSI_PHY_CLK and IMX8QM_MIPI1_DSI_PHY_CLK. Signed-off-by: Robert Chiras <robert.chiras@nxp.com> Reviewed-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
2019-02-27MLK-20996 soc: imx: update SCFW APIsAnson Huang
Update SCFW APIs to SCFW commit: e7a99eb96207 ("SCF-351: Add API to change boot parms.") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Bai Ping <ping.bai@nxp.com> (cherry picked from commit 974c09d8389989fc75df161d78e932032176ce22)
2019-02-15MLK-20930-2 soc: imx: update SCFW APIsAnson Huang
Update SCFW APIs to SCFW commit: 004247e14afc ("SCF-341 Fix bug in setting large slice clock divider") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Bai Ping <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 89add27a115c3b378d7151299b2919c14a1427ef)
2019-02-15MLK-20930-1 arm64: dts: freescale: update resource IDAnson Huang
Update resource ID table to SCFW commit: 004247e14afc ("SCF-341 Fix bug in setting large slice clock divider") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Bai Ping <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 8fa8f318eeac939604e2616fd7a6e1fd10d837a0)
2019-02-12MLK-20890-1 soc: imx8: Add support to read HDCP fuse.Oliver Brown
Added function to read HDCP disable fuse. Signed-off-by: Oliver Brown <oliver.brown@nxp.com>
2019-02-12drm: HDMI and DP specific HDCP2.2 definesRamalingam C
This patch adds HDCP register definitions for HDMI and DP HDCP adaptations. HDMI specific HDCP2.2 register definitions are added into drm_hdcp.h, where as HDCP2.2 register offsets in DPCD offsets are defined at drm_dp_helper.h. v2: bit_field definitions are replaced by macros. [Tomas and Jani] v3: No Changes. v4: Comments style and typos are fixed [Uma] v5: Fix for macros. v6: Adds _MS to the timeouts to represent units [Sean Paul] v7: Macro DP_HDCP_2_2_REG_EKH_KM_OFFSET renamed [Uma] Redundant macro is removed [Uma] Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Sean Paul <seanpaul@chromium.org> (for merging through drm-intel) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1540806351-7137-6-git-send-email-ramalingam.c@intel.com
2019-02-12drm: hdcp2.2 authentication msg definitionsRamalingam C
This patch defines the hdcp2.2 protocol messages for authentication. v2: bit_fields are removed. Instead bitmasking used. [Tomas and Jani] prefix HDCP_2_2_ is added to the macros. [Tomas] v3: No Changes. v4: Style and spellings are fixed [Uma] v5: Fix for macros. v6: comment for Type is improved [Sean Paul] v7: %s/HDCP_2_2_LPRIME_HALF_LEN/HDCP_2_2_V_PRIME_HALF_LEN [Uma] %s/uintxx_t/uxx v8: %s/eceiver_id/receiver_id Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Acked-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1540806351-7137-5-git-send-email-ramalingam.c@intel.com
2019-02-12drm: Fix HDCP downstream dev count readRamalingam C
In both HDMI and DP, device count is represented by 6:0 bits of a register(BInfo/Bstatus) So macro for bitmasking the device_count is fixed(0x3F->0x7F). v3: Retained the Rb-ed. v4: %s/drm\/i915/drm [rodrigo] v5: Added "Fixes:" and HDCP keyword in subject [Rodrigo, Sean Paul] Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Fixes: 495eb7f877ab drm: Add some HDCP related #defines cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1522929802-22850-1-git-send-email-ramalingam.c@intel.com
2019-02-12drm/i915: Check for downstream topology errorsRamalingam C
HDCP compliant Repeaters can support max of 127 devices and max depth of 7 for downstream topology. If these max limits are exceeded, repeater will set the topology error flags MAX_CASCADE_EXCEEDED and/or MAX_DEVS_EXCEEDED in Bstatus followed by asserting READY/CP_IRQ for HDCP transmitter. This patch check for these error flags as soon as READY bit is asserted. Signed-off-by: Ramalingam C <ramalingam.c@intel.com> [seanpaul fixed checkpatch alignment issue] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1516254488-4971-5-git-send-email-ramalingam.c@intel.com
2019-02-12drm: content-type property for HDMI connectorStanislav Lisovskiy
Added content_type property to drm_connector_state in order to properly handle external HDMI TV content-type setting. v2: * Moved helper function which attaches content type property to the drm core, as was suggested. Removed redundant connector state initialization. v3: * Removed caps in drm_content_type_enum_list. After some discussion it turned out that HDMI Spec 1.4 was wrongly assuming that IT Content(itc) bit doesn't affect Content type states, however itc bit needs to be manupulated as well. In order to not expose additional property for itc, for sake of simplicity it was decided to bind those together in same "content type" property. v4: * Added it_content checking in intel_digital_connector_atomic_check. Fixed documentation for new content type enum. v5: * Moved patch revision's description to commit messages. v6: * Minor naming fix for the content type enumeration string. v7: * Fix parameter name for documentation and parameter alignment in order not to get warning. Added Content Type description to new HDMI connector properties section. v8: * Thrown away unneeded numbers from HDMI content-type property description. Switch to strings desription instead of plain definitions. v9: * Moved away hdmi specific content-type enum from drm_connector_state. Content type property should probably not be bound to any specific connector interface in drm_connector_state. Same probably should be done to hdmi_picture_aspect_ration enum which is also contained in drm_connector_state. Added special helper function to get derive hdmi specific relevant infoframe fields. v10: * Added usage description to HDMI properties kernel doc. v11: * Created centralized function for filling HDMI AVI infoframe, based on correspondent DRM property value. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-2-stanislav.lisovskiy@intel.com [vsyrjala: clean up checkpatch multiple blank lines warnings] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2019-02-12drm: Add some HDCP related #definesSean Paul
In preparation for implementing HDCP in i915, add some HDCP related register offsets and defines. The dpcd register offsets will go in drm_dp_helper.h whereas the ddc offsets along with generic HDCP stuff will get stuffed in drm_hdcp.h, which is new. Changes in v2: - drm_hdcp.h gets MIT license (Daniel) Changes in v3: - None Changes in v4: - None Changes in v5: - None Changes in v6: - SPDX license Cc: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Ramalingam C <ramalingm.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180108195545.218615-5-seanpaul@chromium.org
2019-02-12drm: Add Content Protection propertySean Paul
This patch adds a new optional connector property to allow userspace to enable protection over the content it is displaying. This will typically be implemented by the driver using HDCP. The property is a tri-state with the following values: - OFF: Self explanatory, no content protection - DESIRED: Userspace requests that the driver enable protection - ENABLED: Once the driver has authenticated the link, it sets this value The driver is responsible for downgrading ENABLED to DESIRED if the link becomes unprotected. The driver should also maintain the desiredness of protection across hotplug/dpms/suspend. If this looks familiar, I posted [1] this 3 years ago. We have been using this in ChromeOS across exynos, mediatek, and rockchip over that time. Changes in v2: - Pimp kerneldoc for content_protection_property (Daniel) - Drop sysfs attribute Changes in v3: - None Changes in v4: - Changed kerneldoc to recommend userspace polling (Daniel) - Changed kerneldoc to briefly describe how to attach the property (Daniel) Changes in v5: - checkpatch whitespace noise - Change DRM_MODE_CONTENT_PROTECTION_OFF to DRM_MODE_CONTENT_PROTECTION_UNDESIRED Changes in v6: - None Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> [1] https://lists.freedesktop.org/archives/dri-devel/2014-December/073336.html Link: https://patchwork.freedesktop.org/patch/msgid/20180108195545.218615-4-seanpaul@chromium.org
2019-02-12MLK-17537-9: gpu/imx: dcss: Add support for mode_validRobert Chiras
Implement mode_valid and mode_fixup functions for the dcss-crtc driver so that DCSS can filter-out unsupported modes and save the configuration for the supported ones. Use mode_fixup to apply the saved configuration of a supported mode. The mechanism to determine if a mode is supported or not is made in dcss-dtg. Also, add 2 new clocks: - pll: this is the video PLL that provides the pixel clock; it's rate needs to be set such that the pixel clock can be achieved - pll_src*: this is an oscillator that can be used as source clock for the video pll; currently, there are possible maximum 3 pll sources, defined as pll_src1, pll_src2 and pll_src3. The actual clocks that can be used as pll source are: CLK_25M, CLK_27M and CLK_PHY_27MHZ Removed the pdiv_clk and pout_clk and replaced them with pix_clk, since out of those two only one was used: pdiv_clk, representing the pixel clock. In dcss-dtg, each mode is tested and if we can achieve it's pixel clock we save this mode configuration into an internal list and apply this configuration later on when mode_fixup is called. Signed-off-by: Robert Chiras <robert.chiras@nxp.com> Reviewed-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
2019-02-12MLK-17537-7: drm: simple_kms_helper: Add mode_valid() callback supportLinus Walleij
The PL111 needs to filter valid modes based on memory bandwidth. I guess it is a pretty simple operation, so we can still claim the DRM KMS helper pipeline is simple after adding this (optional) vtable callback. Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180220072859.3386-1-linus.walleij@linaro.org
2019-02-12MLK-17537-4: drm/bridge: nwl-dsi: implement mode_valid()Robert Chiras
This patch removes the exported function nwl_dsi_get_bit_clock that was used by nwl_dsi-imx driver in order to configure the phy driver speed and move this configuration directly into the nwl-dsi driver. This function is now used directly by nwl-dsi to verify which mode can or cannot be supported by the DSI PHY. Also, in nwl-dsi, add support for mode_valid and add each supported mode into a list kept internally so that it can apply the needed configuration (phyref rate, dsi lanes, bit-clock) later when the mode is used. Signed-off-by: Robert Chiras <robert.chiras@nxp.com> Reviewed-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
2019-02-12MLK-20899 soc: imx: update SCFW APIsAnson Huang
Update SCFW APIs to SCFW commit: 5c03342369e8 ("SCF-105: Change links in wiki index.") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Bai Ping <ping.bai@nxp.com>
2019-02-12MLK-20769-01 clk: imx: Add sim hsio clock for imx8mmJacky Bai
For the sim_hsio clock, it is used by the HSIO mix. previously, we keep this clock gate always-on, and don't expose it into linux. In order to save power, we need to runtime enable/disable this clock. Signed-off-by: Jacky Bai <ping.bai@nxp.com>
2019-02-12MLK-20724: m2m: add RGBA to exend V4L2 standard format for android usageGuoniu.Zhou
Android has RGBA format output but V4L2 framework do not have this format .In order to support this in our mem2mem driver, we need to extend V4L2 format. Signed-off-by: Guoniu.Zhou <guoniu.zhou@nxp.com>
2019-02-12MLK-20691-1: rpmsg: imx_rpmsg: add new partition reset interruptRobin Gong
Add new partition reset interrupt group to know M4 reset and restore back at rpmsg level later. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2019-02-12MLK-20671-1 gpu: imx: dpu: framegen: Add helpers to get/clear sec chan statusLiu Ying
This patch adds two helpers to get and clear FrameGen secondary channel status respectively. Via the two helpers, users may know if there is empty FIFO read request on this channel or not after getting the status. And, if yes, users may choose to clear the status. According to the IP spec, the empty FIFO read request indicates that data stream from a Fetch unit(e.g., AXI bandwidth not sufficient) fell down. Assuming the display driver sets things up properly, the falling down is very likely caused by the insufficient AXI bandwidth, that is, display underrun. Signed-off-by: Liu Ying <victor.liu@nxp.com>
2019-02-12MLK-20681 brcmfmac: add brcmfmac platform device pinctrl state supportAndy Duan
Add brcmfmac platform device pinctrl state support. That is useful for dynamically configurate pin group for different wlan chips. Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
2019-02-12MLK-20588 clk: imx8qxp: Corret LPCG registers and bits for MIPI SSYe Li
There are some problems in the 8QXP MIPI SS clock tree relating with LPCG: 1. i2c0 and i2c1 uses wrong registers and bits. i2c0 lpcg acutally is at offset 0x10 and i2c1 is at 0x14, ipg_clk and ipg_clk_s at bit 16 and i2c_clk is bit 0. 2. pwm uses wrong bit for 32k_clk, should be bit 4. 3. gpio uses wrong bit for ipg_clk, should be bit 16. Also since the ipg_clk and ipg_clk_s share same LPCG offset and bits, we only need to register one clock. So remove ipg_clk_s from clock tree. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@nxp.com>
2019-02-12video: backlight: Add helpers to enable and disable backlightMeghana Madhyastha
Add helper functions backlight_enable and backlight_disable to enable/disable a backlight device. These helper functions can then be used by different drm and tinydrm drivers to avoid repetition of code and also to enforce a uniform and consistent way to enable/disable a backlight device. Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/39b5bf0a02008a8072d910bdf8231c431e9ef504.1516810725.git.meghana.madhyastha@gmail.com
2019-02-12MGS-4381 [#ccc] Refined the licence for the file viv-metadata.hYong Gan
Change the licence to GPL. Signed-off-by: Yong Gan <yong.gan@nxp.com>
2019-02-12MLK-20342 i2c: xen-i2cback/front: Add i2c_smbus interfaceFlynn xu
Add smbus_xfer interface in xen-i2cback/front driver. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Flynn xu <flynn.xu@nxp.com>
2019-02-12MLK-20301 gpu: imx: dpu: layerblend: Remove several invalid registers & wrappersLiu Ying
The layerblend units don't contain the CONTROLWORD, CURPIXELCNT, LASTPIXELCNT and PERFCOUNTER registers, so let's remove them and their wrappers(no one is calling them), which were introduced accidentally. Signed-off-by: Liu Ying <victor.liu@nxp.com>
2019-02-12MLK-20181-5: drm/modeset-helper: Add simple modeset suspend/resume helpersNoralf Trønnes
Add drm_mode_config_helper_suspend/resume() which takes care of atomic modeset suspend/resume for simple use cases. The suspend state is stored in struct drm_mode_config. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-3-noralf@tronnes.org
2019-02-12MLK-20181-4: drm: Add drm_device->fb_helper pointerNoralf Trønnes
drm_fb_helper is *the* way of doing fbdev emulation so add a pointer to struct drm_device. This makes it possible to add callback helpers for .last_close and .output_poll_changed further reducing fbdev emulation footprint in drivers. The pointer is set by drm_fb_helper_init() and cleared by drm_fb_helper_fini(). Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171030153951.56269-3-noralf@tronnes.org
2019-02-12MLK-20222-2 ARM64:dts: Update SCFW APIRanjani Vaidyanathan
Update SCFW API to the following commit: " ("430d1e3646fbe75e339e18abf2330565eac906e0") Author: Chuck Cannon <chuck.cannon@nxp.com> Date: Fri Nov 2 15:25:45 2018 -0500 SCF-105: RN updates. " Signed-off-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@nxp.com>
2019-02-12MLK-20222-1 soc: Update SCFW APIRanjani Vaidyanathan
Update SCFW API to the following commit: " ("430d1e3646fbe75e339e18abf2330565eac906e0") Author: Chuck Cannon <chuck.cannon@nxp.com> Date: Fri Nov 2 15:25:45 2018 -0500 SCF-105: RN updates. " Signed-off-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@nxp.com>
2019-02-12MLK-20011-2 usb: chipidea: delete DP pullup for secondary charger detectionPeter Chen
Since the DP pullup can be finished at glue layer, we can delete it at common code, but we still need to keep DP pulldown operation since the DP may have already pulled up before. Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2019-02-12MLK-19787 can: flexcan: fix CAN can't receive remote request frameJoakim Zhang
The flexcan driver allocates canfd-skb no matter whether use CAN FD mode or not, it's unreasonable due to it will affect the parse of the remote request frame. To fix the issue, allocating can-skb with "alloc_can_skb()" in normal mode and canfd-skb with "alloc_canfd_skb()" in fd mode. Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
2019-02-12MLK-19850-6 usb: chipidea: introduce flag for enable USB PHY charger detectionPeter Chen
Some platforms may want to use USB PHY charger detection function when VBUS is there, add one flag for it. The user can enable it at firmware. Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2019-02-12mmc: sdhci-esdhc-imx: get rid of support_vselStefan Agner
The field support_vsel is currently only used in the device tree case. Get rid of it. No change in behavior. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> (cherry picked from commit 86f495c57f7146bc5d363d27483957928bb9d1d8)
2019-02-12MLK-18497-7: ASoC: fsl: xaf_afi: Introduce component APIDaniel Baluta
This is based on Xtensa Audio framework userspace implemention API. Reviewed-by: Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
2019-02-12MLK-18497-6: ASoC: fsl: dsp: Add Xtensa library handling APIDaniel Baluta
This is based on RF-2016.4-linux package received from Cadence and introduce the API for loading shared libraries into memory. Based on this we create xf_load_lib/xf_load_unlib functions which are used to tell DSP framework that codec libraries are mapped in memory and it can start using them. Reviewed-by: Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
2019-02-12MLK-19879 drm/imx: dpu: crtc: Support aux stream as master when pc is usedLiu Ying
Pixel combiner uses two display streams to drive a single display. Either of the two display streams can be master stream and the other slave stream. This patch supports auxiliary stream as master stream when pixel combiner is used. The master stream ID can be specified via the newly introduced entry 'master_stream_id' in the device type of the DPU(s) in a particular SoC. Signed-off-by: Liu Ying <victor.liu@nxp.com>
2019-02-12clk: imx8mq: Switch to newly added composite-8m clockAbel Vesa
This needs to be one individual change since otherwise the driver and the dtbs won't build anymore. This updates all the dts and dtsi files, the clock index defines and the imx8mq clock driver itself Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
2019-02-12MLK-19728-1 xen: interface: introduce i2cifPeng Fan
Introduce i2cif from xen. This will be used by paravirtualization i2c driver. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-02-12MLK-19823 drm/imx: dpu: crtc: Get store resource via platform dataLiu Ying
Store9 unit can be shared bewteen display engine(for sync mode fixup) and blit engine. It's proper to get the store resource in the DPU common driver and then pass it to relevant client drivers. From the CRTC driver point of view, it's straightforward to get the store resource via platform data instead of getting it directly, which avoids the wrong situation where getting it twice(one time for one of the two CRTCs of one DPU, respectively). Signed-off-by: Liu Ying <victor.liu@nxp.com>
2019-02-12MLK-19734-1: sdma: add multi-fifo scripts for i.mx6Robin Gong
Add multi-fifo script for i.mx6 instead of dual fifo script, because there is one hardware issue inside SSI ip and switch between dual fifo and single fifo could workaroud it, so add multi-fifo scripts. Signed-off-by: Robin Gong <yibin.gong@nxp.com> (cherry picked from commit 85bb6546ff8cb1fc323e568d689a1e078eaca8fa)
2019-02-12MLK-19588-1 imx: rpmsg: use timeout for MU_SendMessage functionRichard Zhu
- Add the timeout mu msg send api. - Use the timeout mu send message function to do the notification when multi-vdev is enabled on one channel. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
2019-02-12MLK-18848-3: drm: imx: dcss: split vblank irq enable routineLaurentiu Palcu
Currently, when enabling/disabling vblank interrupt, we also enable/disable the CTXLD kick interrupt. Most of the time this is fine, because when vblank gets disabled user-space does not submit any buffers and CTXLD kick interrupt is not needed. There is one case when we actually need to be able to have the CTXLD kick interrupt enabled: when disabling CRTC. Vblank interrupt, in this case, is disabled before the crtc_atomic_disable routine is called. However, we still need CTXLD to push the changes to SUBSAM and DTG. This patch will create a routine just for enabling/disabling CTXLD kick interrupt and move the code from vblank routine to the new one. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
2019-02-12MLK-19575-1 imx8mm: clock: Add gpmi and apbh-dma clockYe Li
The gpmi clock is from NAND clock root, while aphb-dma clock is from NAND_USDHC_BUS_CLK_ROOT. Both share same clock gate CCGR_NAND. We use imx_clk_gate2_shared2 to create two clocks for them. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Bai Ping <ping.bai@nxp.com>
2019-02-12MLK-19351-1 can: flexcan: add can fd mode supportDong AiSheng
Add CAN FD protocol support which supports extended frames up to 64 bytes Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
2019-02-12MLK-19317-1 drm/bridge: sec-dsim: add missing 'ctrail' assignmentFancy Fang
In the macro 'DSIM_DPHY_TIMING' definition, the field 'clk_trail' assignment to 'ctrail' is missing which certainly needs to be added. Signed-off-by: Fancy Fang <chen.fang@nxp.com> (cherry picked from commit f2818410d3d8d3b09002a85b593cee192d60bb06)
generated by cgit v1.2.3 (git 2.0.4) at 2025-05-30 09:14:29 +0000