summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-01-02tty: fix tty_ldisc_receive_buf() documentationJohan Hovold
commit e7e51dcf3b8a5f65c5653a054ad57eb2492a90d0 upstream. The tty_ldisc_receive_buf() helper returns the number of bytes processed so drop the bogus "not" from the kernel doc comment. Fixes: 8d082cd300ab ("tty: Unify receive_buf() code paths") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD)Linus Torvalds
commit 966031f340185eddd05affcf72b740549f056348 upstream. We added support for EXTPROC back in 2010 in commit 26df6d13406d ("tty: Add EXTPROC support for LINEMODE") and the intent was to allow it to override some (all?) ICANON behavior. Quoting from that original commit message: There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. but the problem turns out that "several aspects of the terminal driver are disabled" is a bit ambiguous, and you can really confuse the n_tty layer by setting EXTPROC and then causing some of the ICANON invariants to no longer be maintained. This fixes at least one such case (TIOCINQ) becoming unhappy because of the confusion over whether ICANON really means ICANON when EXTPROC is set. This basically makes TIOCINQ match the case of read: if EXTPROC is set, we ignore ICANON. Also, make sure to reset the ICANON state ie EXTPROC changes, not just if ICANON changes. Fixes: 26df6d13406d ("tty: Add EXTPROC support for LINEMODE") Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Reported-by: syzkaller <syzkaller@googlegroups.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201Daniel Thompson
commit da99706689481717998d1d48edd389f339eea979 upstream. When plugging in a USB webcam I see the following message: xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? handle_tx_event: 913 callbacks suppressed All is quiet again with this patch (and I've done a fair but of soak testing with the camera since). Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02USB: Fix off by one in type-specific length check of BOS SSP capabilityMathias Nyman
commit 07b9f12864d16c3a861aef4817eb1efccbc5d0e6 upstream. USB 3.1 devices are not detected as 3.1 capable since 4.15-rc3 due to a off by one in commit 81cf4a45360f ("USB: core: Add type-specific length check of BOS descriptors") It uses USB_DT_USB_SSP_CAP_SIZE() to get SSP capability size which takes the zero based SSAC as argument, not the actual count of sublink speed attributes. USB3 spec 9.6.2.5 says "The number of Sublink Speed Attributes = SSAC + 1." The type-specific length check patch was added to stable and needs to be fixed there as well Fixes: 81cf4a45360f ("USB: core: Add type-specific length check of BOS descriptors") CC: Masakazu Mokuno <masakazu.mokuno@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02usb: add RESET_RESUME for ELSA MicroLink 56KOliver Neukum
commit b9096d9f15c142574ebebe8fbb137012bb9d99c2 upstream. This modem needs this quirk to operate. It produces timeouts when resumed without reset. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02usb: Add device quirk for Logitech HD Pro Webcam C925eDmitry Fleytman Dmitry Fleytman
commit 7f038d256c723dd390d2fca942919573995f4cfd upstream. Commit e0429362ab15 ("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e") introduced quirk to workaround an issue with some Logitech webcams. There is one more model that has the same issue - C925e, so applying the same quirk as well. See aforementioned commit message for detailed explanation of the problem. Signed-off-by: Dmitry Fleytman <dmitry.fleytman@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02USB: serial: option: adding support for YUGA CLM920-NC5SZ Lin (林上智)
commit 3920bb713038810f25770e7545b79f204685c8f2 upstream. This patch adds support for YUGA CLM920-NC5 PID 0x9625 USB modem to option driver. Interface layout: 0: QCDM/DIAG 1: ADB 2: MODEM 3: AT 4: RMNET Signed-off-by: Taiyi Wu <taiyity.wu@moxa.com> Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02USB: serial: option: add support for Telit ME910 PID 0x1101Daniele Palmas
commit 08933099e6404f588f81c2050bfec7313e06eeaf upstream. This patch adds support for PID 0x1101 of Telit ME910. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02USB: serial: qcserial: add Sierra Wireless EM7565Reinhard Speyerer
commit 92a18a657fb2e2ffbfa0659af32cc18fd2346516 upstream. Sierra Wireless EM7565 devices use the QCSERIAL_SWI layout for their serial ports T: Bus=01 Lev=03 Prnt=29 Port=01 Cnt=02 Dev#= 31 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=9091 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM7565 Qualcomm Snapdragon X16 LTE-A S: SerialNumber=xxxxxxxx C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms but need sendsetup = true for the NMEA port to make it work properly. Simplify the patch compared to v1 as suggested by Bjørn Mork by taking advantage of the fact that existing devices work with sendsetup = true too. Use sendsetup = true for the NMEA interface of QCSERIAL_SWI and add DEVICE_SWI entries for the EM7565 PID 0x9091 and the EM7565 QDL PID 0x9090. Tests with several MC73xx/MC74xx/MC77xx devices have been performed in order to verify backward compatibility. Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02USB: serial: ftdi_sio: add id for Airbus DS P8GRMax Schulze
commit c6a36ad383559a60a249aa6016cebf3cb8b6c485 upstream. Add AIRBUS_DS_P8GR device IDs to ftdi_sio driver. Signed-off-by: Max Schulze <max.schulze@posteo.de> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02usbip: vhci: stop printing kernel pointer addresses in messagesShuah Khan
commit 8272d099d05f7ab2776cf56a2ab9f9443be18907 upstream. Remove and/or change debug, info. and error messages to not print kernel pointer addresses. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02usbip: stub: stop printing kernel pointer addresses in messagesShuah Khan
commit 248a22044366f588d46754c54dfe29ffe4f8b4df upstream. Remove and/or change debug, info. and error messages to not print kernel pointer addresses. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02usbip: prevent leaking socket pointer address in messagesShuah Khan
commit 90120d15f4c397272aaf41077960a157fc4212bf upstream. usbip driver is leaking socket pointer address in messages. Remove the messages that aren't useful and print sockfd in the ones that are useful for debugging. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02s390/qeth: update takeover IPs after configuration changeJulian Wiedmann
[ Upstream commit 02f510f326501470348a5df341e8232c3497bbbb ] Any modification to the takeover IP-ranges requires that we re-evaluate which IP addresses are takeover-eligible. Otherwise we might do takeover for some addresses when we no longer should, or vice-versa. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02s390/qeth: lock IP table while applying takeover changesJulian Wiedmann
[ Upstream commit 8a03a3692b100d84785ee7a834e9215e304c9e00 ] Modifying the flags of an IP addr object needs to be protected against eg. concurrent removal of the same object from the IP table. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02s390/qeth: don't apply takeover changes to RXIPJulian Wiedmann
[ Upstream commit b22d73d6689fd902a66c08ebe71ab2f3b351e22f ] When takeover is switched off, current code clears the 'TAKEOVER' flag on all IPs. But the flag is also used for RXIP addresses, and those should not be affected by the takeover mode. Fix the behaviour by consistenly applying takover logic to NORMAL addresses only. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02s390/qeth: apply takeover changes when mode is toggledJulian Wiedmann
[ Upstream commit 7fbd9493f0eeae8cef58300505a9ef5c8fce6313 ] Just as for an explicit enable/disable, toggling the takeover mode also requires that the IP addresses get updated. Otherwise all IPs that were added to the table before the mode-toggle, get registered with the old settings. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net/mlx5: Fix error flow in CREATE_QP commandMoni Shoua
[ Upstream commit dbff26e44dc3ec4de6578733b054a0114652a764 ] In error flow, when DESTROY_QP command should be executed, the wrong mailbox was set with data, not the one that is written to hardware, Fix that. Fixes: 09a7d9eca1a6 '{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc' Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net/mlx5e: Prevent possible races in VXLAN control flowGal Pressman
[ Upstream commit 0c1cc8b2215f5122ca614b5adca60346018758c3 ] When calling add/remove VXLAN port, a lock must be held in order to prevent race scenarios when more than one add/remove happens at the same time. Fix by holding our state_lock (mutex) as done by all other parts of the driver. Note that the spinlock protecting the radix-tree is still needed in order to synchronize radix-tree access from softirq context. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net/mlx5e: Add refcount to VXLAN structureGal Pressman
[ Upstream commit 23f4cc2cd9ed92570647220aca60d0197d8c1fa9 ] A refcount mechanism must be implemented in order to prevent unwanted scenarios such as: - Open an IPv4 VXLAN interface - Open an IPv6 VXLAN interface (different socket) - Remove one of the interfaces With current implementation, the UDP port will be removed from our VXLAN database and turn off the offloads for the other interface, which is still active. The reference count mechanism will only allow UDP port removals once all consumers are gone. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net/mlx5e: Fix possible deadlock of VXLAN lockGal Pressman
[ Upstream commit 6323514116404cc651df1b7fffa1311ddf8ce647 ] mlx5e_vxlan_lookup_port is called both from mlx5e_add_vxlan_port (user context) and mlx5e_features_check (softirq), but the lock acquired does not disable bottom half and might result in deadlock. Fix it by simply replacing spin_lock() with spin_lock_bh(). While at it, replace all unnecessary spin_lock_irq() to spin_lock_bh(). lockdep's WARNING: inconsistent lock state [ 654.028136] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 654.028229] swapper/5/0 [HC0[0]:SC1[9]:HE1:SE0] takes: [ 654.028321] (&(&vxlan_db->lock)->rlock){+.?.}, at: [<ffffffffa06e7f0e>] mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core] [ 654.028528] {SOFTIRQ-ON-W} state was registered at: [ 654.028607] _raw_spin_lock+0x3c/0x70 [ 654.028689] mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core] [ 654.028794] mlx5e_vxlan_add_port+0x2e/0x120 [mlx5_core] [ 654.028878] process_one_work+0x1e9/0x640 [ 654.028942] worker_thread+0x4a/0x3f0 [ 654.029002] kthread+0x141/0x180 [ 654.029056] ret_from_fork+0x24/0x30 [ 654.029114] irq event stamp: 579088 [ 654.029174] hardirqs last enabled at (579088): [<ffffffff818f475a>] ip6_finish_output2+0x49a/0x8c0 [ 654.029309] hardirqs last disabled at (579087): [<ffffffff818f470e>] ip6_finish_output2+0x44e/0x8c0 [ 654.029446] softirqs last enabled at (579030): [<ffffffff810b3b3d>] irq_enter+0x6d/0x80 [ 654.029567] softirqs last disabled at (579031): [<ffffffff810b3c05>] irq_exit+0xb5/0xc0 [ 654.029684] other info that might help us debug this: [ 654.029781] Possible unsafe locking scenario: [ 654.029868] CPU0 [ 654.029908] ---- [ 654.029947] lock(&(&vxlan_db->lock)->rlock); [ 654.030045] <Interrupt> [ 654.030090] lock(&(&vxlan_db->lock)->rlock); [ 654.030162] *** DEADLOCK *** Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net/mlx5e: Fix features check of IPv6 trafficGal Pressman
[ Upstream commit 2989ad1ec03021ee6d2193c35414f1d970a243de ] The assumption that the next header field contains the transport protocol is wrong for IPv6 packets with extension headers. Instead, we should look the inner-most next header field in the buffer. This will fix TSO offload for tunnels over IPv6 with extension headers. Performance testing: 19.25x improvement, cool! Measuring bandwidth of 16 threads TCP traffic over IPv6 GRE tap. CPU: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz NIC: Mellanox Technologies MT28800 Family [ConnectX-5 Ex] TSO: Enabled Before: 4,926.24 Mbps Now : 94,827.91 Mbps Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net/mlx5: Fix rate limit packet pacing naming and structEran Ben Elisha
[ Upstream commit 37e92a9d4fe38dc3e7308913575983a6a088c8d4 ] In mlx5_ifc, struct size was not complete, and thus driver was sending garbage after the last defined field. Fixed it by adding reserved field to complete the struct size. In addition, rename all set_rate_limit to set_pp_rate_limit to be compliant with the Firmware <-> Driver definition. Fixes: 7486216b3a0b ("{net,IB}/mlx5: mlx5_ifc updates") Fixes: 1466cc5b23d1 ("net/mlx5: Rate limit tables support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaroundGrygorii Strashko
[ Upstream commit c1a8d0a3accf64a014d605e6806ce05d1c17adf1 ] Under some circumstances driver will perform PHY reset in ksz9031_read_status() to fix autoneg failure case (idle error count = 0xFF). When this happens ksz9031 will not detect link status change any more when connecting to Netgear 1G switch (link can be recovered sometimes by restarting netdevice "ifconfig down up"). Reproduced with TI am572x board equipped with ksz9031 PHY while connecting to Netgear 1G switch. Fix the issue by reconfiguring autonegotiation after PHY reset in ksz9031_read_status(). Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net: fec: Allow reception of frames bigger than 1522 bytesAndrew Lunn
[ Upstream commit fbbeefdd21049fcf9437c809da3828b210577f36 ] The FEC Receive Control Register has a 14 bit field indicating the longest frame that may be received. It is being set to 1522. Frames longer than this are discarded, but counted as being in error. When using DSA, frames from the switch has an additional header, either 4 or 8 bytes if a Marvell switch is used. Thus a full MTU frame of 1522 bytes received by the switch on a port becomes 1530 bytes when passed to the host via the FEC interface. Change the maximum receive size to 2048 - 64, where 64 is the maximum rx_alignment applied on the receive buffer for AVB capable FEC cores. Use this value also for the maximum receive buffer size. The driver is already allocating a receive SKB of 2048 bytes, so this change should not have any significant effects. Tested on imx51, imx6, vf610. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net: mvmdio: disable/unprepare clocks in EPROBE_DEFER caseTobias Jordan
[ Upstream commit 589bf32f09852041fbd3b7ce1a9e703f95c230ba ] add appropriate calls to clk_disable_unprepare() by jumping to out_mdio in case orion_mdio_probe() returns -EPROBE_DEFER. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 3d604da1e954 ("net: mvmdio: get and enable optional clock") Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02tg3: Fix rx hang on MTU change with 5717/5719Brian King
[ Upstream commit 748a240c589824e9121befb1cba5341c319885bc ] This fixes a hang issue seen when changing the MTU size from 1500 MTU to 9000 MTU on both 5717 and 5719 chips. In discussion with Broadcom, they've indicated that these chipsets have the same phy as the 57766 chipset, so the same workarounds apply. This has been tested by IBM on both Power 8 and Power 9 systems as well as by Broadcom on x86 hardware and has been confirmed to resolve the hang issue. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net: qmi_wwan: add Sierra EM7565 1199:9091Sebastian Sjoholm
[ Upstream commit aceef61ee56898cfa7b6960fb60b9326c3860441 ] Sierra Wireless EM7565 is an Qualcomm MDM9x50 based M.2 modem. The USB id is added to qmi_wwan.c to allow QMI communication with the EM7565. Signed-off-by: Sebastian Sjoholm <ssjoholm@mac.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02net: fec: unmap the xmit buffer that are not transferred by DMAFugang Duan
[ Upstream commit 178e5f57a8d8f8fc5799a624b96fc31ef9a29ffa ] The enet IP only support 32 bit, it will use swiotlb buffer to do dma mapping when xmit buffer DMA memory address is bigger than 4G in i.MX platform. After stress suspend/resume test, it will print out: log: [12826.352864] fec 5b040000.ethernet: swiotlb buffer is full (sz: 191 bytes) [12826.359676] DMA: Out of SW-IOMMU space for 191 bytes at device 5b040000.ethernet [12826.367110] fec 5b040000.ethernet eth0: Tx DMA memory map failed The issue is that the ready xmit buffers that are dma mapped but DMA still don't copy them into fifo, once MAC restart, these DMA buffers are not unmapped. So it should check the dma mapping buffer and unmap them. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02iw_cxgb4: Only validate the MSN for successful completionsSteve Wise
commit f55688c45442bc863f40ad678c638785b26cdce6 upstream. If the RECV CQE is in error, ignore the MSN check. This was causing recvs that were flushed into the sw cq to be completed with the wrong status (BAD_MSN instead of FLUSHED). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29net: mvneta: eliminate wrong call to handle rx descriptor errorYelena Krivosheev
commit 2eecb2e04abb62ef8ea7b43e1a46bdb5b99d1bf8 upstream. There are few reasons in mvneta_rx_swbm() function when received packet is dropped. mvneta_rx_error() should be called only if error bit [16] is set in rx descriptor. [gregory.clement@free-electrons.com: add fixes tag] Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Tested-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29net: mvneta: use proper rxq_number in loop on rx queuesYelena Krivosheev
commit ca5902a6547f662419689ca28b3c29a772446caa upstream. When adding the RX queue association with each CPU, a typo was made in the mvneta_cleanup_rxqs() function. This patch fixes it. [gregory.clement@free-electrons.com: add commit log and fixes tag] Fixes: 2dcf75e2793c ("net: mvneta: Associate RX queues with each CPU") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Tested-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29net: mvneta: clear interface link status on port disableYelena Krivosheev
commit 4423c18e466afdfb02a36ee8b9f901d144b3c607 upstream. When port connect to PHY in polling mode (with poll interval 1 sec), port and phy link status must be synchronize in order don't loss link change event. [gregory.clement@free-electrons.com: add fixes tag] Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Tested-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29libnvdimm, pfn: fix start_pad handling for aligned namespacesDan Williams
commit 19deaa217bc04e83b59b5e8c8229eb0e53ad9efc upstream. The alignment checks at pfn driver startup fail to properly account for the 'start_pad' in the case where the namespace is misaligned relative to its internal alignment. This is typically triggered in 1G aligned namespace, but could theoretically trigger with small namespace alignments. When this triggers the kernel reports messages of the form: dax2.1: bad offset: 0x3c000000 dax disabled align: 0x40000000 Fixes: 1ee6667cd8d1 ("libnvdimm, pfn, dax: fix initialization vs autodetect...") Reported-by: Jane Chu <jane.chu@oracle.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29clk: sunxi: sun9i-mmc: Implement reset callback for reset controlsChen-Yu Tsai
commit 61d2f2a05765a5f57149efbd93e3e81a83cbc2c1 upstream. Our MMC host driver now issues a reset, instead of just deasserting the reset control, since commit c34eda69ad4c ("mmc: sunxi: Reset the device at probe time"). The sun9i-mmc clock driver does not support this, and will fail, which results in MMC not probing. This patch implements the reset callback by asserting the reset control, then deasserting it after a small delay. Fixes: 7a6fca879f59 ("clk: sunxi: Add driver for A80 MMC config clocks/resets") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20171218035751.20661-1-wens@csie.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29pinctrl: cherryview: Mask all interrupts on Intel_Strago based systemsMika Westerberg
commit d2b3c353595a855794f8b9df5b5bdbe8deb0c413 upstream. Guenter Roeck reported an interrupt storm on a prototype system which is based on Cyan Chromebook. The root cause turned out to be a incorrectly configured pin that triggers spurious interrupts. This will be fixed in coreboot but currently we need to prevent the interrupt storm from happening by masking all interrupts (but not GPEs) on those systems. Link: https://bugzilla.kernel.org/show_bug.cgi?id=197953 Fixes: bcb48cca23ec ("pinctrl: cherryview: Do not mask all interrupts in probe") Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29spi: xilinx: Detect stall with Unknown commandsRicardo Ribalda Delgado
commit 5a1314fa697fc65cefaba64cd4699bfc3e6882a6 upstream. When the core is configured in C_SPI_MODE > 0, it integrates a lookup table that automatically configures the core in dual or quad mode based on the command (first byte on the tx fifo). Unfortunately, that list mode_?_memoy_*.mif does not contain all the supported commands by the flash. Since 4.14 spi-nor automatically tries to probe the flash using SFDP (command 0x5a), and that command is not part of the list_mode table. Whit the right combination of C_SPI_MODE and C_SPI_MEMORY this leads into a stall that can only be recovered with a soft rest. This patch detects this kind of stall and returns -EIO to the caller on those commands. spi-nor can handle this error properly: m25p80 spi0.0: Detected stall. Check C_SPI_MODE and C_SPI_MEMORY. 0x21 0x2404 m25p80 spi0.0: SPI transfer failed: -5 spi_master spi0: failed to transfer one message from queue m25p80 spi0.0: s25sl064p (8192 Kbytes) Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29parisc: Hide Diva-built-in serial aux and graphics cardHelge Deller
commit bcf3f1752a622f1372d3252d0fea8855d89812e7 upstream. Diva GSP card has built-in serial AUX port and ATI graphic card which simply don't work and which both don't have external connectors. User Guides even mention that those devices shouldn't be used. So, prevent that Linux drivers try to enable those devices. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29PCI / PM: Force devices to D0 in pci_pm_thaw_noirq()Rafael J. Wysocki
commit 5839ee7389e893a31e4e3c9cf17b50d14103c902 upstream. It is incorrect to call pci_restore_state() for devices in low-power states (D1-D3), as that involves the restoration of MSI setup which requires MMIO to be operational and that is only the case in D0. However, pci_pm_thaw_noirq() may do that if the driver's "freeze" callbacks put the device into a low-power state, so fix it by making it force devices into D0 via pci_set_power_state() instead of trying to "update" their power state which is pointless. Fixes: e60514bd4485 (PCI/PM: Restore the status of PCI devices across hibernation) Reported-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Maarten Lankhorst <dev@mblankhorst.nl> Tested-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Maarten Lankhorst <dev@mblankhorst.nl> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29mfd: twl6040: Fix child-node lookupJohan Hovold
commit 85e9b13cbb130a3209f21bd7933933399c389ffe upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent node was prematurely freed, while the child node was leaked. Note that the CONFIG_OF compile guard can be removed as of_get_child_by_name() provides a !CONFIG_OF implementation which always fails. Fixes: 37e13cecaa14 ("mfd: Add support for Device Tree to twl6040") Fixes: ca2cad6ae38e ("mfd: Fix twl6040 build failure") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29mfd: twl4030-audio: Fix sibling-node lookupJohan Hovold
commit 0a423772de2f3d7b00899987884f62f63ae00dcb upstream. A helper purported to look up a child node based on its name was using the wrong of-helper and ended up prematurely freeing the parent of-node while leaking any matching node. To make things worse, any matching node would not even necessarily be a child node as the whole device tree was searched depth-first starting at the parent. Fixes: 019a7e6b7b31 ("mfd: twl4030-audio: Add DT support") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29mfd: cros ec: spi: Don't send first message too soonJon Hunter
commit 15d8374874ded0bec37ef27f8301a6d54032c0e5 upstream. On the Tegra124 Nyan-Big chromebook the very first SPI message sent to the EC is failing. The Tegra SPI driver configures the SPI chip-selects to be active-high by default (and always has for many years). The EC SPI requires an active-low chip-select and so the Tegra chip-select is reconfigured to be active-low when the EC SPI driver calls spi_setup(). The problem is that if the first SPI message to the EC is sent too soon after reconfiguring the SPI chip-select, it fails. The EC SPI driver prevents back-to-back SPI messages being sent too soon by keeping track of the time the last transfer was sent via the variable 'last_transfer_ns'. To prevent the very first transfer being sent too soon, initialise the 'last_transfer_ns' variable after calling spi_setup() and before sending the first SPI message. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Benson Leung <bleung@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29acpi, nfit: fix health event notificationDan Williams
commit adf6895754e2503d994a765535fd1813f8834674 upstream. Integration testing with a BIOS that generates injected health event notifications fails to communicate those events to userspace. The nfit driver neglects to link the ACPI DIMM device with the necessary driver data so acpi_nvdimm_notify() fails this lookup: nfit_mem = dev_get_drvdata(dev); if (nfit_mem && nfit_mem->flags_attr) sysfs_notify_dirent(nfit_mem->flags_attr); Add the necessary linkage when installing the notification handler and clean it up when the nfit driver instance is torn down. Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Fixes: ba9c8dd3c222 ("acpi, nfit: add dimm device notification support") Reported-by: Daniel Osawa <daniel.k.osawa@intel.com> Tested-by: Daniel Osawa <daniel.k.osawa@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29ACPI: APEI / ERST: Fix missing error handling in erst_reader()Takashi Iwai
commit bb82e0b4a7e96494f0c1004ce50cec3d7b5fb3d1 upstream. The commit f6f828513290 ("pstore: pass allocated memory region back to caller") changed the check of the return value from erst_read() in erst_reader() in the following way: if (len == -ENOENT) goto skip; - else if (len < 0) { - rc = -1; + else if (len < sizeof(*rcd)) { + rc = -EIO; goto out; This introduced another bug: since the comparison with sizeof() is cast to unsigned, a negative len value doesn't hit any longer. As a result, when an error is returned from erst_read(), the code falls through, and it may eventually lead to some weird thing like memory corruption. This patch adds the negative error value check more explicitly for addressing the issue. Fixes: f6f828513290 (pstore: pass allocated memory region back to caller) Tested-by: Jerry Tang <jtang@suse.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"Greg Kroah-Hartman
This reverts commit 7336f5481f6cf913a2d29d98c6e11f4bbe19d3b2 which is commit a0085f2510e8976614ad8f766b209448b385492f upstream. It causes problems with working systems, as noted by a number of the ChromeOS developers. Cc: Sukumar Ghorai <sukumar.ghorai@intel.com> Cc: Amit K Bag <amit.k.bag@intel.com> Cc: Oliver Neukum <oneukum@suse.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Matthias Kaehlcke <mka@chromium.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Brian Norris <briannorris@chromium.org> Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25platform/x86: asus-wireless: send an EV_SYN/SYN_REPORT between state changesPeter Hutterer
commit bff5bf9db1c9453ffd0a78abed3e2d040c092fd9 upstream. Sending the switch state change twice within the same frame is invalid evdev protocol and only works if the client handles keys immediately as well. Processing events immediately is incorrect, it forces a fake order of events that does not exist on the device. Recent versions of libinput changed to only process the device state and SYN_REPORT time, so now the key event is lost. https://bugs.freedesktop.org/show_bug.cgi?id=104041 Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25thermal/drivers/hisi: Fix multiple alarm interrupts firingDaniel Lezcano
commit db2b0332608c8e648ea1e44727d36ad37cdb56cb upstream. The DT specifies a threshold of 65000, we setup the register with a value in the temperature resolution for the controller, 64656. When we reach 64656, the interrupt fires, the interrupt is disabled. Then the irq thread runs and calls thermal_zone_device_update() which will call in turn hisi_thermal_get_temp(). The function will look if the temperature decreased, assuming it was more than 65000, but that is not the case because the current temperature is 64656 (because of the rounding when setting the threshold). This condition being true, we re-enable the interrupt which fires immediately after exiting the irq thread. That happens again and again until the temperature goes to more than 65000. Potentially, there is here an interrupt storm if the temperature stabilizes at this temperature. A very unlikely case but possible. In any case, it does not make sense to handle dozens of alarm interrupt for nothing. Fix this by rounding the threshold value to the controller resolution so the check against the threshold is consistent with the one set in the controller. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Leo Yan <leo.yan@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25thermal/drivers/hisi: Simplify the temperature/step computationDaniel Lezcano
commit 48880b979cdc9ef5a70af020f42b8ba1e51dbd34 upstream. The step and the base temperature are fixed values, we can simplify the computation by converting the base temperature to milli celsius and use a pre-computed step value. That saves us a lot of mult + div for nothing at runtime. Take also the opportunity to change the function names to be consistent with the rest of the code. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Leo Yan <leo.yan@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25thermal/drivers/hisi: Fix kernel panic on alarm interruptDaniel Lezcano
commit 2cb4de785c40d4a2132cfc13e63828f5a28c3351 upstream. The threaded interrupt for the alarm interrupt is requested before the temperature controller is setup. This one can fire an interrupt immediately leading to a kernel panic as the sensor data is not initialized. In order to prevent that, move the threaded irq after the Tsensor is setup. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Leo Yan <leo.yan@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25thermal/drivers/hisi: Fix missing interrupt enablementDaniel Lezcano
commit c176b10b025acee4dc8f2ab1cd64eb73b5ccef53 upstream. The interrupt for the temperature threshold is not enabled at the end of the probe function, enable it after the setup is complete. On the other side, the irq_enabled is not correctly set as we are checking if the interrupt is masked where 'yes' means irq_enabled=false. irq_get_irqchip_state(data->irq, IRQCHIP_STATE_MASKED, &data->irq_enabled); As we are always enabling the interrupt, it is pointless to check if the interrupt is masked or not, just set irq_enabled to 'true'. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Leo Yan <leo.yan@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-05-19 16:12:16 +0000