summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-03-19net/smsc911x: Use NULL instead of integer for pointerSachin Kamat
Silences the following sparse warning: drivers/net/ethernet/smsc/smsc911x.c:2145:30: warning: Using plain integer as NULL pointer Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19mrf24j40: Fix byte-order of IEEE addressAlan Ott
Load the 64-bit Extended (IEEE) address into the hardware in the proper byte order. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19mrf24j40: Increase max SPI speed to 10MHzAlan Ott
Upon consulting the datasheet further, it does indicates a maximum speed for SCK at 10MHz. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19mrf24j40: Warn if transmit interrupts timeoutAlan Ott
Issue a warning if a transmit complete interrupt doesn't happen in time. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19mrf24j40: pinctrl supportAlan Ott
Activate pinctrl settings when used with a DT system. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-18bnx2x: add RSS capability for GRE trafficDmitry Kravkov
The patch drives FW to perform RSS for GRE traffic, based on inner headers. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-18bnx2x: add CSUM and TSO support for encapsulation protocolsDmitry Kravkov
The patch utilizes FW offload capabilities for encapsulation protocols. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-18net: ftgmac100: Use module_platform_driver()Sachin Kamat
module_platform_driver macro removes some boilerplate and makes the code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Po-Yu Chuang <ratbert@faraday-tech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-18net: ep93xx_eth: Use module_platform_driver()Sachin Kamat
module_platform_driver macro removes some boilerplate and makes the code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-18net: dm9000: Use module_platform_driver()Sachin Kamat
module_platform_driver macro removes some boilerplate and makes the code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-18net: neterion: replace ip_fast_csum with csum_replace2Li RongQing
replace ip_fast_csum with csum_replace2 to save cpu cycles Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17tcp: Remove TCPCTChristoph Paasch
TCPCT uses option-number 253, reserved for experimental use and should not be used in production environments. Further, TCPCT does not fully implement RFC 6013. As a nice side-effect, removing TCPCT increases TCP's performance for very short flows: Doing an apache-benchmark with -c 100 -n 100000, sending HTTP-requests for files of 1KB size. before this patch: average (among 7 runs) of 20845.5 Requests/Second after: average (among 7 runs) of 21403.6 Requests/Second Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17drivers: net: irda: use resource_size() in au1k_ir.cSilviu-Mihai Popescu
This uses the resource_size() function instead of explicit computation. Signed-off-by: Silviu-Mihai Popescu <silviupopescu1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17sfc: make local functions staticstephen hemminger
Trivial sparse detected functions that should be static. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17drivers:net: dma_alloc_coherent: use __GFP_ZERO instead of memset(, 0)Joe Perches
Reduce the number of calls required to alloc a zeroed block of memory. Trivially reduces overall object size. Other changes around these removals o Neaten call argument alignment o Remove an unnecessary OOM message after dma_alloc_coherent failure o Remove unnecessary gfp_t stack variable Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17vxlan: generalize forwarding tablesDavid Stevens
This patch generalizes VXLAN forwarding table entries allowing an administrator to: 1) specify multiple destinations for a given MAC 2) specify alternate vni's in the VXLAN header 3) specify alternate destination UDP ports 4) use multicast MAC addresses as fdb lookup keys 5) specify multicast destinations 6) specify the outgoing interface for forwarded packets The combination allows configuration of more complex topologies using VXLAN encapsulation. Changes since v1: rebase to 3.9.0-rc2 Signed-Off-By: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17caif: remove caif_shmErwan Yvin
caif_shm is an old implementation caif_shm will be replaced by caif_virtio [ As explained by Linus Walleij: "U5500 used this, but was cancelled and the silicon did not reach anyone outside ST-Ericsson. Then for the next platforms, we have gone for the leaner & cleaner approach of using virtio, rpmesg and rproc." ] Signed-off-by: Erwan Yvin <erwan.yvin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sjur Brendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15driver/qlogic: replace ip_fast_csum with csum_replace2Li RongQing
replace ip_fast_csum with csum_replace2 to save cpu cycles Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15drivers:net: Remove dma_alloc_coherent OOM messagesJoe Perches
I believe these error messages are already logged on allocation failure by warn_alloc_failed and so get a dump_stack on OOM. Remove the unnecessary additional error logging. Around these deletions: o Alignment neatening. o Remove unnecessary casts of dma_alloc_coherent. o Hoist assigns from ifs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15be2net: Use new F/W mailbox cmd to manipulate interrupts.Somnath Kotur
This is needed as the earlier method of manipulating this register via PCI Config space is disallowed by certain Hypervisors. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15be2net: enable interrupts in be_probe() (RoCE and other ULPs need them)Somnath Kotur
As the NIC PCI function may be used by other protocols, the chip interrupts must be enabled in be_probe() itself rather than be_open(). Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15netxen: write IP address to firmware when using bondingnikolay@redhat.com
This patch allows LRO aggregation on bonded devices that contain an NX3031 device. It also adds a for_each_netdev_in_bond_rcu(bond, slave) macro which executes for each slave that has bond as master. V3: After testing and discussing this with Rajesh, I decided to keep the vlan ip cache and just rename it to ip_cache since it will store bond ip addresses too. A new master flag has been added to the ip cache to denote that the address has been added because of a master device. I've taken care of the enslave/release cases by checking for various combinations of events and flags (e.g. netxen has a master, it's a bond master and it's not marked as a slave means it is being enslaved and is dev_open()ed in bond_enslave). I've changed netxen_free_ip_list() to have a "master" parameter which causes all IP addresses marked as master to be deleted (used when a netxen is being released). I've made the patch use the new upper device API as well. The following cases were tested: - bond -> netxen - vlan -> netxen - vlan -> bond -> netxen V2: Remove local ip caching, retrieve addresses dynamically and restore them if necessary. Note: Tested with NX3031 adapter. Tested-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Andy Gospodarek <agospoda@redhat.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14csiostor: Cleanup chip specific operations.Arvind Bhushan
This patch removes chip specific operations from the common hardware paths, as well as the Makefile change to accomodate the new files. Signed-off-by: Arvind Bhushan <arvindb@chelsio.com> Signed-off-by: Naresh Kumar Inna <naresh@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14csiostor: Header file modifications for chip support and bug fixes.Arvind Bhushan
This patch defines the common operations to support multiple chips. It includes common header file modifications to support the current chips (T4 and T5). It also includes the following bug fixes: - reconfirms the rnode state after an implicit logo. - corrects the stats array size. - sets up and checks flags correctly when coming up as master and finding the card initialized Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Arvind Bhushan <arvindb@chelsio.com> Signed-off-by: Naresh Kumar Inna <naresh@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14csiostor: Add T5 adapter operations.Arvind Bhushan
This patch creates a new file for T5 adapter operations. Signed-off-by: Arvind Bhushan <arvindb@chelsio.com> Signed-off-by: Naresh Kumar Inna <naresh@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14csiostor: Segregate T4 adapter operations.Arvind Bhushan
This patch separates T4 adapter operations into a new file. Signed-off-by: Arvind Bhushan <arvindb@chelsio.com> Signed-off-by: Naresh Kumar Inna <naresh@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Fix onchip queue support for T5Vipul Pandya
T5 adapter does not support onchip queue memory. Present logic fails to allocate QP for T5 and returns an error. Also, if module parameter ocqp_support is zero then we are unable to allocate QP which should not be the case. Ideally if ocqp_support parameter is 0 or onchip queue support is disable then host QP should be allocated before returning an error. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Bump tcam_full stat and WR reply timeoutVipul Pandya
Always bump the tcam_full stat. Also, bump wr reply timeout to 30 seconds. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Map pbl buffers for dma if using DSGL.Vipul Pandya
Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Use DSGLs for fastreg and adapter memory writes for T5.Vipul Pandya
It enables direct DMA by HW to memory region PBL arrays and fast register PBL arrays from host memory, vs the T4 way of passing these arrays in the WR itself. The result is lower latency for memory registration, and larger PBL array support for fast register operations. This patch also updates ULP_TX_MEM_WRITE command fields for T5. Ordering bit of ULP_TX_MEM_WRITE is at bit position 22 in T5 and at 23 in T4. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Add module_params to enable DB FC & Coalescing on T5Vipul Pandya
Both DB Flow-Control and DB Coalescing are disabled by default on T5 Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Turn off db coalescing when RDMA QPs are in use.Vipul Pandya
Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Add Support for Chelsio T5 adapterVipul Pandya
Adds support for Chelsio T5 adapter. Enables T5's Write Combining feature. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4vf: Add support for Chelsio T5 adapterSantosh Rastapur
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Disable SR-IOV support for PF4-7 for T5Santosh Rastapur
All T5 adapters will only support VFs on PF0-3 despite the ability of the hardware to support them on PF4-7. This keeps our T4 and T5 adapters more similar which simplifies host driver software. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Update driver version and descriptionSantosh Rastapur
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Add T5 PCI idsSantosh Rastapur
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Add T5 debugfs supportSantosh Rastapur
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Enable doorbell drop recovery only for T4 adapterSantosh Rastapur
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Add T5 write combining supportSantosh Rastapur
This patch implements a low latency Write Combining (aka Write Coalescing) work request path. PCIE maps User Space Doorbell BAR2 region writes to the new interface to SGE. SGE pulls a new message from PCIE new interface and if its a coalesced write work request then pushes it for processing. This patch copies coalesced work request to memory mapped BAR2 space. Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Dump T5 registersSantosh Rastapur
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Initialize T5Santosh Rastapur
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Add macros, structures and inline functions for T5Santosh Rastapur
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4: Add register definations for T5Santosh Rastapur
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13tuntap: remove unused variable in __tun_detach()Wei Yongjun
The variable dev is initialized but never used otherwise, so remove the unused variable. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13sfc: remove duplicated include from efx.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13qlcnic: Bump up the version to 5.1.37Shahed Shaikh
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13qlcnic: Implement flash sysfs callback for 83xx adapterHimanshu Madhani
QLogic applications use these callbacks to perform o NIC Partitioning (NPAR) configuration and management o Diagnostic tests o Flash access and updates Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13drivers: net: ethernet: cpsw: implement get phy_id via ioctlMugunthan V N
Implement get phy_id via ioctl SIOCGMIIPHY. In switch mode active phy_id is returned and in dual EMAC mode slave's specific phy_id is returned. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13driver: net: ethernet: cpsw: implement interrupt pacing via ethtoolMugunthan V N
This patch implements support for interrupt pacing block of CPSW via ethtool Inetrrupt pacing block is common of both the ethernet interface in dual emac mode Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2025-05-24 14:56:16 +0000