summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2010-12-09USB: serial: ftdi_sio: Vardaan USB RS422/485 converter PID addedJacques Viviers
commit 6fdbad8021151a9e93af8159a6232c8f26415c09 upstream. Add the PID for the Vardaan Enterprises VEUSB422R3 USB to RS422/485 converter. It uses the same chip as the FTDI_8U232AM_PID 0x6001. This should also work with the stable branches for: 2.6.31, 2.6.32, 2.6.33, 2.6.34, 2.6.35, 2.6.36 Signed-off-by: Jacques Viviers <jacques.viviers@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09USB: ftdi_sio: Add ID for RT Systems USB-29B radio cableMichael Stuermer
commit 28942bb6a9dd4e2ed793675e515cfb8297ed355b upstream. Another variant of the RT Systems programming cable for ham radios. Signed-off-by: Michael Stuermer <ms@mallorn.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09USB: misc: usbsevseg: fix up some sysfs attribute permissionsGreg Kroah-Hartman
commit e24d7ace4e822debcb78386bf279c9aba4d7fbd1 upstream. They should not be writable by any user. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Harrison Metzger <harrisonmetz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09USB: misc: trancevibrator: fix up a sysfs attribute permissionGreg Kroah-Hartman
commit d489a4b3926bad571d404ca6508f6744b9602776 upstream. It should not be writable by any user. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Sam Hocevar <sam@zoy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09USB: ftdi_sio: revert "USB: ftdi_sio: fix DTR/RTS line modes"Johan Hovold
commit 677aeafe19e88c282af74564048243ccabb1c590 upstream. This reverts commit 6a1a82df91fa0eb1cc76069a9efe5714d087eccd. RTS and DTR should not be modified based on CRTSCTS when calling set_termios. Modem control lines are raised at port open by the tty layer and should stay raised regardless of whether hardware flow control is enabled or not. This is in conformance with the way serial ports work today and many applications depend on this behaviour to be able to talk to hardware implementing hardware flow control (without the applications actually using it). Hardware which expects different behaviour on these lines can always use TIOCMSET/TIOCMBI[SC] after port open to change them. Reported-by: Daniel Mack <daniel@caiaq.de> Reported-by: Dave Mielke <dave@mielke.cc> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09USB: misc: usbled: fix up some sysfs attribute permissionsGreg Kroah-Hartman
commit 48f115470e68d443436b76b22dad63ffbffd6b97 upstream. They should not be writable by any user. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09USB: misc: cypress_cy7c63: fix up some sysfs attribute permissionsGreg Kroah-Hartman
commit c990600d340641150f7270470a64bd99a5c0b225 upstream. They should not be writable by any user. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oliver Bock <bock@tfh-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09USB: atm: ueagle-atm: fix up some permissions on the sysfs filesGreg Kroah-Hartman
commit e502ac5e1eca99d7dc3f12b2a6780ccbca674858 upstream. Some of the sysfs files had the incorrect permissions. Some didn't make sense at all (writable for a file that you could not write to?) Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthieu Castet <castet.matthieu@free.fr> Cc: Stanislaw Gruszka <stf_xl@wp.pl> Cc: Damien Bergamini <damien.bergamini@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09USB: storage: sierra_ms: fix sysfs file attributeGreg Kroah-Hartman
commit d9624e75f6ad94d8a0718c1fafa89186d271a78c upstream. A non-writable sysfs file shouldn't have writable attributes. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Kevin Lloyd <klloyd@sierrawireless.com> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09USB: EHCI: fix obscure race in ehci_endpoint_disableAlan Stern
commit 02e2c51ba3e80acde600721ea784c3ef84da5ea1 upstream. This patch (as1435) fixes an obscure and unlikely race in ehci-hcd. When an async URB is unlinked, the corresponding QH is removed from the async list. If the QH's endpoint is then disabled while the URB is being given back, ehci_endpoint_disable() won't find the QH on the async list, causing it to believe that the QH has been lost. This will lead to a memory leak at best and quite possibly to an oops. The solution is to trust usbcore not to lose track of endpoints. If the QH isn't on the async list then it doesn't need to be taken off the list, but the driver should still wait for the QH to become IDLE before disabling it. In theory this fixes Bugzilla #20182. In fact the race is so rare that it's not possible to tell whether the bug is still present. However, adding delays and making other changes to force the race seems to show that the patch works. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09usb: core: fix information leak to userlandVasiliy Kulikov
commit 886ccd4520064408ce5876cfe00554ce52ecf4a7 upstream. Structure usbdevfs_connectinfo is copied to userland with padding byted after "slow" field uninitialized. It leads to leaking of contents of kernel stack memory. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09usb: misc: iowarrior: fix information leak to userlandVasiliy Kulikov
commit eca67aaeebd6e5d22b0d991af1dd0424dc703bfb upstream. Structure iowarrior_info is copied to userland with padding byted between "serial" and "revision" fields uninitialized. It leads to leaking of contents of kernel stack memory. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Acked-by: Kees Cook <kees.cook@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09usb: misc: sisusbvga: fix information leak to userlandVasiliy Kulikov
commit 5dc92cf1d0b4b0debbd2e333b83f9746c103533d upstream. Structure sisusb_info is copied to userland with "sisusb_reserved" field uninitialized. It leads to leaking of contents of kernel stack memory. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09USB: option: fix when the driver is loaded incorrectly for some Huawei devices.ma rui
commit 58c0d9d70109bd7e82bdb9517007311a48499960 upstream. When huawei datacard with PID 0x14AC is insterted into Linux system, the present kernel will load the "option" driver to all the interfaces. But actually, some interfaces run as other function and do not need "option" driver. In this path, we modify the id_tables, when the PID is 0x14ac ,VID is 0x12d1, Only when the interface's Class is 0xff,Subclass is 0xff, Pro is 0xff, it does need "option" driver. Signed-off-by: ma rui <m00150988@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09USB: ftdi_sio: add device IDs for Milkymist One JTAG/serialSebastien Bourdeauducq
commit 7fea0f714ffb3f303d4b66933af2df2f5584c9bf upstream. Add the USB IDs for the Milkymist One FTDI-based JTAG/serial adapter (http://projects.qi-hardware.com/index.php/p/mmone-jtag-serial-cable/) to the ftdi_sio driver and disable the first serial channel (used as JTAG from userspace). Signed-off-by: Sebastien Bourdeauducq <sebastien@milkymist.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09USB: gadget: AT91: fix typo in atmel_usba_udc driverJosh Wu
commit b48809518631880207796b4aab0fc39c2f036754 upstream. compile fix for bug introduced by 969affff547027) Signed-off-by: Josh Wu <josh.wu@atmel.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22USB: accept some invalid ep0-maxpacket valuesAlan Stern
commit 56626a72a47bf3e50875d960d6b5f17b9bee0ab2 upstream. A few devices (such as the RCA VR5220 voice recorder) are so non-compliant with the USB spec that they have invalid maxpacket sizes for endpoint 0. Nevertheless, as long as we can safely use them, we may as well do so. This patch (as1432) softens our acceptance criterion by allowing high-speed devices to have ep0-maxpacket sizes other than 64. A warning is printed in the system log when this happens, and the existing error message is clarified. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: James <bjlockie@lockie.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22USB: opticon: Fix long-standing bugs in opticon driverAlon Ziv
commit 97cd8dc4ca9a1a5efb2cc38758e01492e3b013e2 upstream. The bulk-read callback had two bugs: a) The bulk-in packet's leading two zeros were returned (and the two last bytes truncated) b) The wrong URB was transmitted for the second (and later) read requests, causing further reads to return the entire packet (including leading zeros) Signed-off-by: Alon Ziv <alon-git@nolaviz.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22USB: disable endpoints after unbinding interfaces, not beforeAlan Stern
commit 80f0cf3947889014d3a3dc0ad60fb87cfda4b12a upstream. This patch (as1430) fixes a bug in usbcore. When a device configuration change occurs or a device is removed, the endpoints for the old config should be completely disabled. However it turns out they aren't; this is because usb_unbind_interface() calls usb_enable_interface() or usb_set_interface() to put interfaces back in altsetting 0, which re-enables the interfaces' endpoints. As a result, when a device goes through a config change or is unconfigured, the ep_in[] and ep_out[] arrays may be left holding old pointers to usb_host_endpoint structures. If the device is deauthorized these structures get freed, and the stale pointers cause errors when the the device is eventually unplugged. The solution is to disable the endpoints after unbinding the interfaces instead of before. This isn't as large a change as it sounds, since usb_unbind_interface() disables all the interface's endpoints anyway before calling the driver's disconnect routine, unless the driver claims to support "soft" unbind. This fixes Bugzilla #19192. Thanks to "Tom" Lei Ming for diagnosing the underlying cause of the problem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Carsten Sommer <carsten_sommer@ymail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22USB: atmel_usba_udc: force vbus_pin at -EINVAL when gpio_request failledJean-Christophe PLAGNIOL-VILLARD
commit 969affff54702785330de553b790372e261e93f9 upstream. to ensure gpio_is_valid return false Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22USB: cp210x: Add WAGO 750-923 Service Cable device IDAnders Larsen
commit 93ad03d60b5b18897030038234aa2ebae8234748 upstream. The WAGO 750-923 USB Service Cable is used for configuration and firmware updates of several industrial automation products from WAGO Kontakttechnik GmbH. Bus 004 Device 002: ID 1be3:07a6 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1be3 idProduct 0x07a6 bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 WAGO USB Service Cable iSerial 3 1277796751 . . . Signed-off-by: Anders Larsen <al@alarsen.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22USB: cp210x: Add Renesas RX-Stick device IDDJ Delorie
commit 2f1136d1d08a63dcdbcd462621373f30d8dfe590 upstream. RX610 development board by Renesas Bus 001 Device 024: ID 045b:0053 Hitachi, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x045b Hitachi, Ltd idProduct 0x0053 bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 RX-Stick iSerial 3 0001 . . . http://am.renesas.com/rx610stick Signed-off-by: DJ Delorie <dj@delorie.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22USB: option: Add more ZTE modem USB id'sMauro Carvalho Chehab
commit ecfa153ef616b901e86d9a051b329fcda7a6ce7b upstream. There are lots of ZTE USB id's currently not covered by usb/serial. Adds them, to allow those devices to work properly on Linux. While here, put the USB ID's for 0x2002/0x2003 at the sorted order. This patch is based on zte.c file found on MF645. PS.: The ZTE driver is commenting the USB ID for 0x0053. It also adds, commented, an USB ID for 0x0026. Not sure why, but I think that 0053 is used by their devices in storage mode only. So, I opted to keep the comment on this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22usb: musb: blackfin: call gpio_free() on error path in musb_platform_init()Sergei Shtylyov
commit 00be545e49d83485d49a598d3b7e090088934be8 upstream. Blackfin's musb_platform_init() needs to call gpio_free() for error cleanup iff otg_get_transceiver() call returns NULL. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22USB: ftdi_sio: add device ids for ScienceScopeGreg Kroah-Hartman
commit 0f266abd70cd83571eca019f764b5f1992da7361 upstream. This adds the requested device ids to the ftdi_sio driver. Reported-by: Ewan Bingham <ewan@auc.co.uk> Cc: Kuba Ober <kuba@mareimbrium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22USB: ftdi_sio: new VID/PIDs for various Papouch devicesDaniel Suchy
commit 59c6ccd9f9aecfa59c99ceba6d4d34b180547a05 upstream. This patch for FTDI USB serial driver ads new VID/PIDs used on various devices manufactured by Papouch (http://www.papouch.com). These devices have their own VID/PID, although they're using standard FTDI chip. In ftdi_sio.c, I also made small cleanup to have declarations for all Papouch devices together. Signed-off-by: Daniel Suchy <danny@danysek.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22USB: add PID for FTDI based OpenDCC hardwareRainer Keller
commit 99c1e4f89d1033444ce4d0c064bd2826e81c3775 upstream. The OpenDCC project is developing a new hardware. This patch adds its PID to the list of known FTDI devices. The PID can be found at http://www.opendcc.de/elektronik/usb/opendcc_usb.html Signed-off-by: Rainer Keller <mail@rainerkeller.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22USB: ftdi_sio: Add PID for accesio productsRich Mattes
commit 3126d8236ca6f68eb8292c6af22c2e59afbeef24 upstream. Adds support for Accesio USB to Serial adapters, which are built around FTDI FT232 UARTs. Tested with the Accesio USB-COM-4SM. Signed-off-by: Rich Mattes <richmattes@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28usb: musb: gadget: restart request on clearing endpoint haltSergei Shtylyov
commit a666e3e6098a9f56310e4ec2705f1dad124a34b5 upstream. Commit 46034dca515bc4ddca0399ae58106d1f5f0d809f (USB: musb_gadget_ep0: stop abusing musb_gadget_set_halt()) forgot to restart a queued request after clearing the endpoint halt feature. This results in a couple of USB resets while enumerating the file-backed storage gadget due to CSW packet not being sent for the MODE SENSE(10) command. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28usb: musb: gadget: fix kernel panic if using out ep with FIFO_TXRX styleMing Lei
commit bd2e74d657fc7d514881cc2117e323790b257914 upstream. For shared fifo hw endpoint(with FIFO_TXRX style), only ep_in field of musb_hw_ep is intialized in musb_g_init_endpoints, and ep_out is not initialized, but musb_g_rx and rxstate may access ep_out field of musb_hw_ep by the method below: musb_ep = &musb->endpoints[epnum].ep_out which can cause the kernel panic[1] below, this patch fixes the issue by getting 'musb_ep' from '&musb->endpoints[epnum].ep_in' for shared fifo endpoint. [1], kernel panic [root@OMAP3EVM /]# musb_interrupt 1583: ** IRQ peripheral usb0008 tx0000 rx4000 musb_stage0_irq 460: <== Power=f0, DevCtl=99, int_usb=0x8 musb_g_rx 772: <== (null), rxcsr 4007 ffffffe8 musb_g_rx 786: iso overrun on ffffffe8 Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 17 [#1] PREEMPT last sysfs file: /sys/devices/platform/musb_hdrc/usb1/usb_device/usbdev1.1/dev Modules linked in: g_zero CPU: 0 Tainted: G W (2.6.35-rc6-gkh-wl+ #92) PC is at musb_g_rx+0xfc/0x2ec LR is at vprintk+0x3f4/0x458 pc : [<c02c07a4>] lr : [<c006ccb0>] psr: 20000193 sp : c760bd78 ip : c03c9d70 fp : c760bdbc r10: 00000000 r9 : fa0ab1e0 r8 : 0000000e r7 : c7e80158 r6 : ffffffe8 r5 : 00000001 r4 : 00004003 r3 : 00010003 r2 : c760bcd8 r1 : c03cd030 r0 : 0000002e Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 8778c019 DAC: 00000017 Process kmemleak (pid: 421, stack limit = 0xc760a2e8) Stack: (0xc760bd78 to 0xc760c000) bd60: ffffffe8 c04b1b58 bd80: ffffffe8 c7c01ac0 00000000 c7e80d24 c0084238 00000001 00000001 c7e80158 bda0: 0000000e 00000008 00000099 000000f0 c760be04 c760bdc0 c02bcd68 c02c06b4 bdc0: 00000099 00000008 00004000 c760bdd8 c03cc4f8 00000000 00000002 c7e80158 bde0: c7d2e300 60000193 c760a000 0000005c 00000000 00000000 c760be24 c760be08 be00: c02bcecc c02bc1ac c7d2e300 c7d2e300 0000005c c760a000 c760be54 c760be28 be20: c00ad698 c02bce6c 00000000 c7d2e300 c067c258 0000005c c067c294 00000001 be40: c760a000 00000000 c760be74 c760be58 c00af984 c00ad5fc 0000005c 00000000 be60: 00000000 00000002 c760be8c c760be78 c0039080 c00af8d0 ffffffff fa200000 be80: c760beec c760be90 c0039b6c c003900c 00000001 00000000 c7d1e240 00000000 bea0: 00000000 c068bae8 00000000 60000013 00000001 00000000 00000000 c760beec bec0: c0064ecc c760bed8 c00ff7d0 c003a0a8 60000013 ffffffff 00000000 c068bae8 bee0: c760bf24 c760bef0 c00ff7d0 c0064ec4 00000001 00000000 c00ff700 00000000 bf00: c0087f00 00000000 60000013 c0d76a70 c0e23795 00000001 c760bf4c c760bf28 bf20: c00ffdd8 c00ff70c c068bb08 c068bae8 60000013 c0100938 c068bb30 00000000 bf40: c760bf84 c760bf50 c010014c c00ffd84 00000001 00000000 c010000c 00012c00 bf60: c7c33f04 00012c00 c7c33f04 00000000 c0100938 00000000 c760bf9c c760bf88 bf80: c01009a8 c0100018 c760bfa8 c7c33f04 c760bff4 c760bfa0 c0088000 c0100944 bfa0: c760bf98 00000000 00000000 00000001 dead4ead ffffffff ffffffff c08ba2bc bfc0: 00000000 c049e7fa 00000000 c0087f70 c760bfd0 c760bfd0 c7c33f04 c0087f70 bfe0: c006f5e8 00000013 00000000 c760bff8 c006f5e8 c0087f7c 7f0004ff df2000ff Backtrace: [<c02c06a8>] (musb_g_rx+0x0/0x2ec) from [<c02bcd68>] (musb_interrupt+0xbc8/0xcc0) [<c02bc1a0>] (musb_interrupt+0x0/0xcc0) from [<c02bcecc>] (generic_interrupt+0x6c/0x84) [<c02bce60>] (generic_interrupt+0x0/0x84) from [<c00ad698>] (handle_IRQ_event+0xa8/0x1ec) r7:c760a000 r6:0000005c r5:c7d2e300 r4:c7d2e300 [<c00ad5f0>] (handle_IRQ_event+0x0/0x1ec) from [<c00af984>] (handle_level_irq+0xc0/0x13c) [<c00af8c4>] (handle_level_irq+0x0/0x13c) from [<c0039080>] (asm_do_IRQ+0x80/0xa0) r7:00000002 r6:00000000 r5:00000000 r4:0000005c [<c0039000>] (asm_do_IRQ+0x0/0xa0) from [<c0039b6c>] (__irq_svc+0x4c/0xb4) Exception stack(0xc760be90 to 0xc760bed8) be80: 00000001 00000000 c7d1e240 00000000 bea0: 00000000 c068bae8 00000000 60000013 00000001 00000000 00000000 c760beec bec0: c0064ecc c760bed8 c00ff7d0 c003a0a8 60000013 ffffffff r5:fa200000 r4:ffffffff [<c0064eb8>] (sub_preempt_count+0x0/0x100) from [<c00ff7d0>] (find_and_get_object+0xd0/0x110) r5:c068bae8 r4:00000000 [<c00ff700>] (find_and_get_object+0x0/0x110) from [<c00ffdd8>] (scan_block+0x60/0x104) r8:00000001 r7:c0e23795 r6:c0d76a70 r5:60000013 r4:00000000 [<c00ffd78>] (scan_block+0x0/0x104) from [<c010014c>] (kmemleak_scan+0x140/0x484) [<c010000c>] (kmemleak_scan+0x0/0x484) from [<c01009a8>] (kmemleak_scan_thread+0x70/0xcc) r8:00000000 r7:c0100938 r6:00000000 r5:c7c33f04 r4:00012c00 [<c0100938>] (kmemleak_scan_thread+0x0/0xcc) from [<c0088000>] (kthread+0x90/0x98) r5:c7c33f04 r4:c760bfa8 [<c0087f70>] (kthread+0x0/0x98) from [<c006f5e8>] (do_exit+0x0/0x684) r7:00000013 r6:c006f5e8 r5:c0087f70 r4:c7c33f04 Code: e3002312 e58d6000 e2833e16 eb0422d5 (e5963020) ---[ end trace f3d5e96f75c297b7 ]--- Signed-off-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Sergei Shtylyov <sshtylyov@mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28USB: fix bug in initialization of interface minor numbersAlan Stern
commit 0026e00523a85b90a92a93ddf6660939ecef3e54 upstream. Recent changes in the usbhid layer exposed a bug in usbcore. If CONFIG_USB_DYNAMIC_MINORS is enabled then an interface may be assigned a minor number of 0. However interfaces that aren't registered as USB class devices also have their minor number set to 0, during initialization. As a result usb_find_interface() may return the wrong interface, leading to a crash. This patch (as1418) fixes the problem by initializing every interface's minor number to -1. It also cleans up the usb_register_dev() function, which besides being somewhat awkwardly written, does not unwind completely on all its error paths. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Philip J. Turmel <philip@turmel.org> Tested-by: Gabriel Craciunescu <nix.or.die@googlemail.com> Tested-by: Alex Riesen <raa.lkml@gmail.com> Tested-by: Matthias Bayer <jackdachef@gmail.com> CC: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-26USB: serial/mos*: prevent reading uninitialized stack memoryDan Rosenberg
commit a0846f1868b11cd827bdfeaf4527d8b1b1c0b098 upstream. The TIOCGICOUNT device ioctl in both mos7720.c and mos7840.c allows unprivileged users to read uninitialized stack memory, because the "reserved" member of the serial_icounter_struct struct declared on the stack is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: cdc-acm: Fixing crash when ACM probing interfaces with no endpoint ↵Toby Gray
descriptors. commit 577045c0a76e34294f902a7d5d60e90b04d094d0 upstream. Certain USB devices, such as the Nokia X6 mobile phone, don't expose any endpoint descriptors on some of their interfaces. If the ACM driver is forced to probe all interfaces on a device the a NULL pointer dereference will occur when the ACM driver attempts to use the endpoint of the alternative settings. One way to get the ACM driver to probe all the interfaces is by using the /sys/bus/usb/drivers/cdc_acm/new_id interface. This patch checks that the endpoint pointer for the current alternate settings is non-NULL before using it. Signed-off-by: Toby Gray <toby.gray@realvnc.com> Cc: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: cdc-acm: Add pseudo modem without AT command capabilitiesPhilippe Corbes
commit 5b239f0aebd4dd6f85b13decf5e18e86e35d57f0 upstream. cdc-acm.c : Manage pseudo-modem without AT commands capabilities Enable to drive electronic simple gadgets based on microcontrolers. The Interface descriptor is like this: bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 None Signed-off-by: Philippe Corbes <philippe.corbes@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: cdc-acm: Adding second ACM channel support for various Nokia and one ↵Toby Gray
Samsung phones commit 4035e45632c2a8bb4edae83c20447051bd9a9604 upstream. S60 phones from Nokia and Samsung expose two ACM channels. The first is a modem with a standard AT-command interface, which is picked up correctly by CDC-ACM. The second ACM port is marked as having a vendor-specific protocol. This means that the ACM driver will not claim the second channel by default. This adds support for the second ACM channel for the following devices: Nokia E63 Nokia E75 Nokia 6760 Slide Nokia E52 Nokia E55 Nokia E72 Nokia X6 Nokia N97 Mini Nokia 5800 Xpressmusic Nokia E90 Samsung GTi8510 (INNOV8) Signed-off-by: Toby Gray <toby.gray@realvnc.com> Cc: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: Expose vendor-specific ACM channel on Nokia 5230Przemo Firszt
commit 83a4eae9aeed4a69e89e323a105e653ae06e7c1f upstream. Nokia S60 phones expose two ACM channels. The first is a modem, the second is 'vendor-specific' but is treated as a serial device at the S60 end, so we want to expose it on Linux too. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: cdc-acm: add another device quirkRuss Nelson
commit c3baa19b0a9b711b02cec81d9fea33b7b9628957 upstream. The Maretron USB100 needs this quirk in order to work properly. Signed-off-by: Russ Nelson <nelson@crynwr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: Exposing second ACM channel as tty for Nokia S60 phones.Adrian Taylor
commit c1479a92cf0a7792298d364e44a781550621cb58 upstream. Nokia S60 phones expose two ACM channels. The first is a modem and is picked up by the standard AT-command interface information in the CDC-ACM driver. The second is marked as having a vendor-specific protocol. Normally, we don't expose those as ttys. (On some other devices, they may be claimed by the rndis_host driver and used as a network interface). But on S60 this second ACM channel is the way that third-party S60 application developers are expected to communicate over USB. It acts as a serial device at the S60 end, and so it should on Linux too. The list of devices is largely derived from: http://wiki.forum.nokia.com/index.php/S60_Platform_and_device_identification_codes http://wiki.forum.nokia.com/index.php/Nokia_USB_Product_IDs and includes only the S60 3rd Edition+ devices documented there. There are many devices for which the USB device ID is not documented, including: Nokia 6290 Nokia E63 Nokia 5630 XpressMusic Nokia 5730 XpressMusic Nokia 6710 Navigator Nokia 6720 classic Nokia 6730 Classic Nokia 6760 slide Nokia 6790 slide Nokia 6790 Surge Nokia E52 Nokia E55 Nokia E71x (AT&T) Nokia E72 Nokia E75 Nokia E75 US+LTA variant Nokia N79 Nokia N86 8MP Nokia 5230 (RM-588) Nokia 5230 (RM-594) Nokia 5530 XpressMusic Nokia 5530 XpressMusic (china) Nokia 5800 XM Nokia N97 (RM-506) Nokia N97 mini Nokia X6 It would be good to add those subsequently. Signed-off-by: Adrian Taylor <aat@realvnc.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20usb: serial: mos7840: Add USB IDs to support more B&B USB/RS485 converters.Dave Ludlow
commit 870408c8291015872a7a0b583673a9e56b3e73f4 upstream. Add the USB IDs needed to support the B&B USOPTL4-4P, USO9ML2-2P, and USO9ML2-4P. This patch expands and corrects a typo in the patch sent on 08-31-2010. Signed-off-by: Dave Ludlow <dave.ludlow@bay.ws> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: mos7840: fix DMA buffers on stack and endianess bugsJohan Hovold
commit 9e221a35f82cbef0397d81fed588bafba95b550c upstream. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20usb: serial: mos7840: Add USB ID to support the B&B Electronics USOPTL4-2P.Dave Ludlow
commit caf3a636a9f809fdca5fa746e6687096457accb1 upstream. Add the USB ID needed to support B&B Electronic's 2-port, optically-isolated, powered, USB to RS485 converter. Signed-off-by: Dave Ludlow <dave.ludlow@bay.ws> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: serial: Extra device/vendor ID for mos7840 driverBlaise Gassend
commit 27f1281d5f72e4f161e215ccad3d7d86b9e624a9 upstream. Signed-off-by: Blaise Gassend <blaise.gasend_linux@m4x.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: ftdi_sio: Added custom PIDs for ChamSys productsLuke Lowrey
commit 657373883417b2618023fd4135d251ba06a2c30a upstream. Added the 0xDAF8 to 0xDAFF PID range for ChamSys limited USB interface/wing products Signed-off-by: Luke Lowrey <luke@chamsys.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: cp210x: Add B&G H3000 link cable IDJason Detring
commit 0bf7a81c5d447c21db434be35363c44c0a30f598 upstream. This is the cable between an H3000 navigation unit and a multi-function display. http://www.bandg.com/en/Products/H3000/Spares-and-Accessories/Cables/H3000-CPU-USB-Cable-Pack/ Signed-off-by: Jason Detring <jason.detring@navico.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: CP210x Add new device IDCraig Shelley
commit 541e05ec3add5ab5bcf238d60161b53480280b20 upstream. New device ID added for Balluff RFID reader. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: Fix kernel oops with g_ether and WindowsMaxim Osipov
commit 037d3656adbd7e8cb848f01cf5dec423ed76bbe7 upstream. Please find attached patch for https://bugzilla.kernel.org/show_bug.cgi?id=16023 problem. Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: ehci-ppc-of: problems in unwindDan Carpenter
commit 08a3b3b1c2e622e378d9086aee9e2e42ce37591d upstream. The iounmap(ehci->ohci_hcctrl_reg); should be the first thing we do because the ioremap() was the last thing we did. Also if we hit any of the goto statements in the original code then it would have led to a NULL dereference of "ehci". This bug was introduced in: 796bcae7361c "USB: powerpc: Workaround for the PPC440EPX USBH_23 errata [take 3]" I modified the few lines in front a little so that my code didn't obscure the return success code path. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-26USB: ftdi_sio: add product ID for Lenz LI-USBGalen Seitz
commit ea233f805537f5da16c2b34d85b6c5cf88a0f9aa upstream. Add ftdi product ID for Lenz LI-USB, a model train interface. This was NOT tested against 2.6.35, but a similar patch was tested with the CentOS 2.6.18-194.11.1.el5 kernel. It wasn't clear to me what ordering is being used in ftdi_sio.c, so I inserted the ID after another model train entry(SPROG_II). Signed-off-by: Galen Seitz <galens@seitzassoc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-26USB: ftdi_sio: Add ID for Ionics PlugComputerMartin Michlmayr
commit 666cc076d284e32d11bfc5ea2fbfc50434cff051 upstream. Add the ID for the Ionics PlugComputer (<http://ionicsplug.com/>). Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-26USB: xhci: Remove buggy assignment in next_trb()John Youn
commit a1669b2c64a9c8b031e0ac5cbf2692337a577f7c upstream. The code to increment the TRB pointer has a slight ambiguity that could lead to a bug on different compilers. The ANSI C specification does not specify the precedence of the assignment operator over the postfix operator. gcc 4.4 produced the correct code (increment the pointer and assign the value), but a MIPS compiler that one of John's clients used assigned the old (unincremented) value. Remove the unnecessary assignment to make all compilers produce the correct assembly. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2025-05-11 23:20:19 +0000