summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/mlx4
AgeCommit message (Collapse)Author
2012-02-13IB/mlx4: pass SMP vendor-specific attribute MADs to firmwareJack Morgenstein
commit a6f7feae6d19e84253918d88b04153af09d3a243 upstream. In the current code, vendor-specific MADs (e.g with the FDR-10 attribute) are silently dropped by the driver, resulting in timeouts at the sending side and inability to query/configure the relevant feature. However, the ConnectX firmware is able to handle such MADs. For unsupported attributes, the firmware returns a GET_RESPONSE MAD containing an error status. For example, for a FDR-10 node with LID 11: # ibstat mlx4_0 1 CA: 'mlx4_0' Port 1: State: Active Physical state: LinkUp Rate: 40 (FDR10) Base lid: 11 LMC: 0 SM lid: 24 Capability mask: 0x02514868 Port GUID: 0x0002c903002e65d1 Link layer: InfiniBand Extended Port Query (EPI) vendor mad timeouts before the patch: # smpquery MEPI 11 -d ibwarn: [4196] smp_query_via: attr 0xff90 mod 0x0 route Lid 11 ibwarn: [4196] _do_madrpc: retry 1 (timeout 1000 ms) ibwarn: [4196] _do_madrpc: retry 2 (timeout 1000 ms) ibwarn: [4196] _do_madrpc: timeout after 3 retries, 3000 ms ibwarn: [4196] mad_rpc: _do_madrpc failed; dport (Lid 11) smpquery: iberror: [pid 4196] main: failed: operation EPI: ext port info query failed EPI query works OK with the patch: # smpquery MEPI 11 -d ibwarn: [6548] smp_query_via: attr 0xff90 mod 0x0 route Lid 11 ibwarn: [6548] mad_rpc: data offs 64 sz 64 mad data 0000 0000 0000 0001 0000 0001 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 # Ext Port info: Lid 11 port 0 StateChangeEnable:...............0x00 LinkSpeedSupported:..............0x01 LinkSpeedEnabled:................0x01 LinkSpeedActive:.................0x01 Signed-off-by: Jack Morgenstein <jackm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Ira Weiny <weiny2@llnl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2011-12-06IB/mlx4: Fix shutdown crash accessing a non-existent bitmapRoland Dreier
Commit cfcde11c3d7a ("IB/mlx4: Use flow counters on IBoE ports") added code that sets elements of counters[] to -1 if no counter is allocated, but then goes ahead and passes every entry to mlx4_counter_free() on shutdown. This is a bad idea, especially if MLX4_DEV_CAP_FLAG_COUNTERS isn't set so there isn't even an underlying bitmap to free from. Tested-by: Sean Hefty <sean.hefty@intel.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (62 commits) mlx4_core: Deprecate log_num_vlan module param IB/mlx4: Don't set VLAN in IBoE WQEs' control segment IB/mlx4: Enable 4K mtu for IBoE RDMA/cxgb4: Mark QP in error before disabling the queue in firmware RDMA/cxgb4: Serialize calls to CQ's comp_handler RDMA/cxgb3: Serialize calls to CQ's comp_handler IB/qib: Fix issue with link states and QSFP cables IB/mlx4: Configure extended active speeds mlx4_core: Add extended port capabilities support IB/qib: Hold links until tuning data is available IB/qib: Clean up checkpatch issue IB/qib: Remove s_lock around header validation IB/qib: Precompute timeout jiffies to optimize latency IB/qib: Use RCU for qpn lookup IB/qib: Eliminate divide/mod in converting idx to egr buf pointer IB/qib: Decode path MTU optimization IB/qib: Optimize RC/UC code by IB operation IPoIB: Use the right function to do DMA unmap pages RDMA/cxgb4: Use correct QID in insert_recv_cqe() RDMA/cxgb4: Make sure flush CQ entries are collected on connection close ...
2011-11-01Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'fdr', 'ipath', 'ipoib', ↵Roland Dreier
'misc', 'mlx4', 'misc', 'nes', 'qib' and 'xrc' into for-next
2011-10-31IB/mlx4: Don't set VLAN in IBoE WQEs' control segmentOr Gerlitz
There's no need to set the vlan-related fields in an IBoE send WQE control segment: - the vlan to be used by a UD QP is set in the datagram segment. - for GSI (CM) QP, all the headers down to 8021q and MAC are built by the software anyway. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-31IB/mlx4: Enable 4K mtu for IBoEOr Gerlitz
The IBoE port MTU is derived from the corresponding Ethernet netdevice MTU, which can support jumbo frames of 9K, and hence surely supports the max IB mtu of 4K. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-28IB/mlx4: Configure extended active speedsMarcel Apfelbaum
Set the extended active speeds based on the hardware configuration. Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il> Reviewed-by: Hal Rosenstock <hal@mellanox.com> [ Move FDR-10 handling into ib_link_query_port(). - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/uverbs: Export ib_open_qp() capability to user spaceSean Hefty
Allow processes that share the same XRC domain to open an existing shareable QP. This permits those processes to receive events on the shared QP and transfer ownership, so that any process may modify the QP. The latter allows the creating process to exit, while a remaining process can still transition it for path migration purposes. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13IB/mlx4: Add support for XRC QPsSean Hefty
Support the creation of XRC INI and TGT QPs. To handle the case where a CQ or PD is not provided, we allocate them internally with the xrcd. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13IB/mlx4: Add support for XRC SRQsSean Hefty
Allow the user to create XRC SRQs. This patch is based on a patch from Jack Morgenstrein <jackm@dev.mellanox.co.il>. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13IB/mlx4: Add support for XRC domainsSean Hefty
Support creating and destroying XRC domains. Any sharing of the XRCD is managed above the low-level driver. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/core: Add SRQ type fieldSean Hefty
Currently, there is only a single ("basic") type of SRQ, but with XRC support we will add a second. Prepare for this by defining an SRQ type and setting all current users to IB_SRQT_BASIC. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-08-11mlx4: Fix infiniband Kconfig dependencies.David S. Miller
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-18IB/mlx4: Support PMA counters for IBoEOr Gerlitz
Use the per port counter attached to all QPs created on that port to implement port level packets/bytes performance counters a la IB. Derived from a patch by Eli Cohen <eli@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-18IB/mlx4: Use flow counters on IBoE portsOr Gerlitz
Allocate flow counter per Ethernet/IBoE port, and attach this counter to all the QPs created on that port. Based on patch by Eli Cohen <eli@mellanox.co.il>. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-18IB/mlx4: Generate GID change events in IBoE codeOr Gerlitz
IBoE doesn't use LIDs. Use the GID change event to update the IB core cache for addition/deletion of GIDs. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-23mlx4: generalization of multicast steering.Yevgeny Petrilin
The same packet steering mechanism would be used both for IB and Ethernet, Both multicasts and unicasts. This commit prepares the general infrastructure for this. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: Reporting HW revision in ethtool -iYevgeny Petrilin
HW revision is derived from device ID and rev id. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-12IB/mlx4: Handle protocol field in multicast tableAleksey Senin
The newest device firmware stores IB vs. Ethernet protocol in two bits in members_count field of multicast group table (0: Infiniband, 1: Ethernet). When changing the QP members count for a multicast group, it important not to reset this information. When calling multicast attach first time, the protocol type should be specified. In this patch we always set it IB, but in the future we will handle Ethernet too. When looking for a QP, the protocol type shoud be checked too. Signed-off-by: Aleksey Senin <alekseys@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long)Roland Dreier
Some systems have PCI addresses that don't fit in unsigned long (eg some 32-bit PowerPC 440 systems have 36-bit bus addresses). Fix up mlx4 drivers by using phys_addr_t where appropriate, so we don't truncate any PCI resource addresses before ioremapping them. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (42 commits) IB/qib: Fix refcount leak in lkey/rkey validation IB/qib: Improve SERDES tunning on QMH boards IB/qib: Unnecessary delayed completions on RC connection IB/qib: Issue pre-emptive NAKs on eager buffer overflow IB/qib: RDMA lkey/rkey validation is inefficient for large MRs IB/qib: Change QPN increment IB/qib: Add fix missing from earlier patch IB/qib: Change receive queue/QPN selection IB/qib: Fix interrupt mitigation IB/qib: Avoid duplicate writes to the rcv head register IB/qib: Add a few new SERDES tunings IB/qib: Reset packet list after freeing IB/qib: New SERDES init routine and improvements to SI quality IB/qib: Clear WAIT_SEND flags when setting QP to error state IB/qib: Fix context allocation with multiple HCAs IB/qib: Fix multi-Florida HCA host panic on reboot IB/qib: Handle transitions from ACTIVE_DEFERRED to ACTIVE better IB/qib: UD send with immediate receive completion has wrong size IB/qib: Set port physical state even if other fields are invalid IB/qib: Generate completion callback on errors ...
2011-01-10IB/mlx4: Handle -ENOMEM in forward_trap()Dan Carpenter
ib_create_send_mad() can return ERR_PTR(-ENOMEM) here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/mlx4: Don't call dma_free_coherent() with irqs disabledVladimir Sokolovsky
mlx4_ib_free_cq_buf() should not be called under spin_lock_irq() since it calls dma_free_coherent(), which needs irqs enabled. Fix this by deferring the free to outside the locked region. This was found due to the WARN_ON(irqs_disabled()); in swiotlb_free_coherent(). Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-12-26Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/ipv4/fib_frontend.c
2010-12-01IB/mlx4: Fix IBoE link stateEli Cohen
Use netif_running() and netif_carrier_ok() to report link state, exactly as is done to report Ethernet link state in sysfs. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-12-01IB/mlx4: Fix IBoE reported link rateEli Cohen
The link rate is the product of the link speed in the link width. For Etherent ports the rate is 10G, so we use 1 for the width and 4 for speed to get the correct rate. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-12-01IB/mlx4: Fix memory ordering of VLAN insertion control bitsEli Cohen
We must fully update the control segment before marking it as valid, so that hardware doesn't start executing it before we're ready. Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Move VLAN control bit setting to before wmb(). - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-11-24infiniband: remove dev_base_lock useEric Dumazet
dev_base_lock is the legacy way to lock the device list, and is planned to disappear. (writers hold RTNL, readers hold RCU lock) Convert rdma_translate_ip() and update_ipv6_gids() to RCU locking. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (63 commits) IB/qib: clean up properly if pci_set_consistent_dma_mask() fails IB/qib: Allow driver to load if PCIe AER fails IB/qib: Fix uninitialized pointer if CONFIG_PCI_MSI not set IB/qib: Fix extra log level in qib_early_err() RDMA/cxgb4: Remove unnecessary KERN_<level> use RDMA/cxgb3: Remove unnecessary KERN_<level> use IB/core: Add link layer type information to sysfs IB/mlx4: Add VLAN support for IBoE IB/core: Add VLAN support for IBoE IB/mlx4: Add support for IBoE mlx4_en: Change multicast promiscuous mode to support IBoE mlx4_core: Update data structures and constants for IBoE mlx4_core: Allow protocol drivers to find corresponding interfaces IB/uverbs: Return link layer type to userspace for query port operation IB/srp: Sync buffer before posting send IB/srp: Use list_first_entry() IB/srp: Reduce number of BUSY conditions IB/srp: Eliminate two forward declarations IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144 IB: Replace EXTRA_CFLAGS with ccflags-y ...
2010-10-26Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'ehca', 'iboe', 'ipoib', ↵Roland Dreier
'misc', 'mlx4', 'nes', 'qib' and 'srp' into for-next
2010-10-25IB/mlx4: Add VLAN support for IBoEEli Cohen
This patch allows IBoE traffic to be encapsulated in 802.1Q tagged VLAN frames. The VLAN tag is encoded in the GID and derived from it by a simple computation. The netdev notifier callback is modified to catch VLAN device addition/removal and the port's GID table is updated to reflect the change, so that for each netdevice there is an entry in the GID table. When the port's GID table is exhausted, GID entries will not be added. Only children of the main interfaces can add to the GID table; if a VLAN interface is added on another VLAN interface (e.g. "vconfig add eth2.6 8"), then that interfaces will not add an entry to the GID table. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25IB/core: Add VLAN support for IBoEEli Cohen
Add 802.1q VLAN support to IBoE. The VLAN tag is encoded within the GID derived from a link local address in the following way: GID[11] GID[12] contain the VLAN ID when the GID contains a VLAN. The 3 bits user priority field of the packets are identical to the 3 bits of the SL. In case of rdma_cm apps, the TOS field is used to generate the SL field by doing a shift right of 5 bits effectively taking to 3 MS bits of the TOS field. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25IB/mlx4: Add support for IBoEEli Cohen
Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-23IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144Jack Morgenstein
The Node Description cannot be changed via MADs (it is read-only). Until now, it was changed in the driver via sysfs, and the new Node Description was simply inserted by the driver into MAD responses (replacing the description returned by FW). System startup scripts use the sysfs interface to change the node description at driver startup to show the hostname, etc. However, this has a race condition: the SM could discover the original FW node description rather than the system-specific description if it queried the port before the startup scripts finish running. For mlx4, we fix this with a new FW command (SET_NODE) that allows passing the new node description to FW. When this command is invoked, FW sends a trap 144 to the SM. When it gets this trap, the SM can query the node to obtain the new node description -- thus eliminating the effects of the race. This patch simply calls SET_NODE command when a new node description is entered via sysfs (thus causing trap 144 to be issued by the FW). We ignore all failures of the SET_NODE command (including those caused by using a device FW that predates the SET_NODE command), since in that case things work just as before. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-16infiniband: fix mlx4 kconfig dependency warningRandy Dunlap
Fix kconfig dependency warning to satisfy dependencies: warning: (MLX4_EN && NETDEVICES && NETDEV_10000 && PCI && INET || MLX4_INFINIBAND && INFINIBAND) selects MLX4_CORE which has unmet direct dependencies (NETDEVICES && NETDEV_10000 && PCI) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14IB/pack: IBoE UD packet packing supportEli Cohen
Add support for packing IBoE packet headers. Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Clean up and fix ib_ud_header_init() a bit. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-11IB/mlx4: Limit size of fast registration WRsEli Cohen
Fix the limit on the size of max fast registration WRs that can be posted to match hardware capabilities. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-21IB/core: Allow device-specific per-port sysfs filesRalph Campbell
Add a new parameter to ib_register_device() so that low-level device drivers can pass in a pointer to a callback function that will be called for each port that is registered in sysfs. This allows low-level device drivers to create files in /sys/class/infiniband/<hca>/ports/<N>/ without having to poke through the internals of the RDMA sysfs handling. There is no need for an unregister function since the kobject reference will go to zero when ib_unregister_device() is called. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-21IB/mlx4: Add support for masked atomic operationsVladimir Sokolovsky
Add support for masked atomic operations (masked compare and swap, masked fetch and add). Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Check correct variable for allocation failure RDMA/nes: Correct cap.max_inline_data assignment in nes_query_qp() RDMA/cm: Set num_paths when manually assigning path records IB/cm: Fix device_create() return value check
2010-04-07IB/mlx4: Check correct variable for allocation failureDan Carpenter
The intent here is to check the "mfrpl->mapped_page_list" allocation. We checked "mfrpl->ibfrpl.page_list" earlier. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-01Merge branch 'misc' into for-nextRoland Dreier
Conflicts: drivers/infiniband/core/uverbs_main.c
2010-02-24IB/core: Fix and clean up ib_ud_header_init()Eli Cohen
ib_ud_header_init() first clears header and then fills up the various fields. Later on, it tests header->immediate_present, which it has already cleared, so the condition is always false. Fix this by adding an immediate_present parameter and setting header->immediate_present as is done with grh_present. Also remove unused calculation of header_len. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-12IB/mlx4: Simplify retrieval of ib_deviceEli Cohen
struct ib_qp already holds a pointer to the ib device. No need to dive to the hw device object to retrieve it. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-01-06IB/mlx4: Fix queue overflow check in post_recvOr Gerlitz
In mlx4_ib_post_recv(), we should check the queue for overflow using recv_cq instead of send_cq (current code looks like a copy-and-paste mistake). Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-01-06IB/mlx4: Initialize SRQ scatter entries when creating an SRQJack Morgenstein
As for memfree mthca hardware, ConnectX also requires SRQ WQE scatter entries to be initialized with the invalid L_Key at SRQ creation time. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (45 commits) RDMA/cxgb3: Fix error paths in post_send and post_recv RDMA/nes: Fix stale ARP issue RDMA/nes: FIN during MPA startup causes timeout RDMA/nes: Free kmap() resources RDMA/nes: Check for zero STag RDMA/nes: Fix Xansation test crash on cm_node ref_count RDMA/nes: Abnormal listener exit causes loopback node crash RDMA/nes: Fix crash in nes_accept() RDMA/nes: Resource not freed for REJECTed connections RDMA/nes: MPA request/response error checking RDMA/nes: Fix query of ORD values RDMA/nes: Fix MAX_CM_BUFFER define RDMA/nes: Pass correct size to ioremap_nocache() RDMA/nes: Update copyright and branding string RDMA/nes: Add max_cqe check to nes_create_cq() RDMA/nes: Clean up struct nes_qp RDMA/nes: Implement IB_SIGNAL_ALL_WR as an iWARP extension RDMA/nes: Add additional SFP+ PHY uC status check and PHY reset RDMA/nes: Correct fast memory registration implementation IB/ehca: Fix error paths in post_send and post_recv ...
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-12IB/mlx4: Remove limitation on LSO header sizeEli Cohen
Current code has a limitation: an LSO header is not allowed to cross a 64 byte boundary. This patch removes this limitation by setting the WQE RR for large headers thus allowing LSO headers of any size. The extra buffer reserved for MLX4_IB_QP_LSO QPs has been doubled, from 64 to 128 bytes, assuming this is reasonable upper limit for header length. Also, this patch will cause IB_DEVICE_UD_TSO to be set only for HCA FW versions that set MLX4_DEV_CAP_FLAG_BLH; e.g. FW version 2.6.000 and higher. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-05-12 05:59:47 +0000