| Age | Commit message (Collapse) | Author |
|---|
|
commit 42720138b06301cc8a7ee8a495a6d021c4b6a9bc upstream.
Writes were a bit racy, but hard to turn into a bug at the same time.
(Particularly because modern Linux doesn't use this feature anymore.)
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[Actually the next patch makes it much, much easier to trigger the race
so I'm including this one for stable@ as well. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 854e8bb1aa06c578c2c9145fa6bfe3680ef63b23 upstream.
Upon WRMSR, the CPU should inject #GP if a non-canonical value (address) is
written to certain MSRs. The behavior is "almost" identical for AMD and Intel
(ignoring MSRs that are not implemented in either architecture since they would
anyhow #GP). However, IA32_SYSENTER_ESP and IA32_SYSENTER_EIP cause #GP if
non-canonical address is written on Intel but not on AMD (which ignores the top
32-bits).
Accordingly, this patch injects a #GP on the MSRs which behave identically on
Intel and AMD. To eliminate the differences between the architecutres, the
value which is written to IA32_SYSENTER_ESP and IA32_SYSENTER_EIP is turned to
canonical value before writing instead of injecting a #GP.
Some references from Intel and AMD manuals:
According to Intel SDM description of WRMSR instruction #GP is expected on
WRMSR "If the source register contains a non-canonical address and ECX
specifies one of the following MSRs: IA32_DS_AREA, IA32_FS_BASE, IA32_GS_BASE,
IA32_KERNEL_GS_BASE, IA32_LSTAR, IA32_SYSENTER_EIP, IA32_SYSENTER_ESP."
According to AMD manual instruction manual:
LSTAR/CSTAR (SYSCALL): "The WRMSR instruction loads the target RIP into the
LSTAR and CSTAR registers. If an RIP written by WRMSR is not in canonical
form, a general-protection exception (#GP) occurs."
IA32_GS_BASE and IA32_FS_BASE (WRFSBASE/WRGSBASE): "The address written to the
base field must be in canonical form or a #GP fault will occur."
IA32_KERNEL_GS_BASE (SWAPGS): "The address stored in the KernelGSbase MSR must
be in canonical form."
This patch fixes CVE-2014-3610.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8b3c3104c3f4f706e99365c3e0d2aa61b95f969f upstream.
The previous patch blocked invalid writes directly when the MSR
is written. As a precaution, prevent future similar mistakes by
gracefulling handle GPs caused by writes to shared MSRs.
Signed-off-by: Andrew Honig <ahonig@google.com>
[Remove parts obsoleted by Nadav's patch. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 56f17dd3fbc44adcdbc3340fe3988ddb833a47a7 upstream.
The following events can lead to an incorrect KVM_EXIT_MMIO bubbling
up to userspace:
(1) Guest accesses gpa X without a memory slot. The gfn is cached in
struct kvm_vcpu_arch (mmio_gfn). On Intel EPT-enabled hosts, KVM sets
the SPTE write-execute-noread so that future accesses cause
EPT_MISCONFIGs.
(2) Host userspace creates a memory slot via KVM_SET_USER_MEMORY_REGION
covering the page just accessed.
(3) Guest attempts to read or write to gpa X again. On Intel, this
generates an EPT_MISCONFIG. The memory slot generation number that
was incremented in (2) would normally take care of this but we fast
path mmio faults through quickly_check_mmio_pf(), which only checks
the per-vcpu mmio cache. Since we hit the cache, KVM passes a
KVM_EXIT_MMIO up to userspace.
This patch fixes the issue by using the memslot generation number
to validate the mmio cache.
Signed-off-by: David Matlack <dmatlack@google.com>
[xiaoguangrong: adjust the code to make it simpler for stable-tree fix.]
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Tested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0d234daf7e0a3290a3a20c8087eefbd6335a5bd4 upstream.
This reverts commit 682367c494869008eb89ef733f196e99415ae862,
which causes 32-bit SMP Windows 7 guests to panic.
SeaBIOS has a limit on the number of MTRRs that it can handle,
and this patch exceeded the limit. Better revert it.
Thanks to Nadav Amit for debugging the cause.
Reported-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7cb060a91c0efc5ff94f83c6df3ed705e143cdb9 upstream.
KVM does not really do much with the PAT, so this went unnoticed for a
long time. It is exposed however if you try to do rdmsr on the PAT
register.
Reported-by: Valentine Sinitsyn <valentine.sinitsyn@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 682367c494869008eb89ef733f196e99415ae862 upstream.
Recent Intel CPUs have 10 variable range MTRRs. Since operating systems
sometime make assumptions on CPUs while they ignore capability MSRs, it is
better for KVM to be consistent with recent CPUs. Reporting more MTRRs than
actually supported has no functional implications.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In contrast to VMX, SVM dose not automatically transfer DR6 into the
VCPU's arch.dr6. So if we face a DR6 read, we must consult a new vendor
hook to obtain the current value. And as SVM now picks the DR6 state
from its VMCB, we also need a set callback in order to write updates of
DR6 back.
Fixes a regression of 020df0794f.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off: Peter Lieven <pl@kamp.de>
Signed-off: Gleb Natapov
Signed-off: Vadim Rozenfeld <vrozenfe@redhat.com>
After some consideration I decided to submit only Hyper-V reference
counters support this time. I will submit iTSC support as a separate
patch as soon as it is ready.
v1 -> v2
1. mark TSC page dirty as suggested by
Eric Northup <digitaleric@google.com> and Gleb
2. disable local irq when calling get_kernel_ns,
as it was done by Peter Lieven <pl@amp.de>
3. move check for TSC page enable from second patch
to this one.
v3 -> v4
Get rid of ref counter offset.
v4 -> v5
replace __copy_to_user with kvm_write_guest
when updateing iTSC page.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The prototype for kvm_check_iopl appeared in commit
f850e2e603bf5a05b0aee7901857cf85715aa694 ("KVM: x86 emulator: Check IOPL
level during io instruction emulation"), but the function never actually
existed. Remove the prototype.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
complete_pio ceased to exist in commit
7972995b0c346de76fe260ce0fd6bcc8ffab724a ("KVM: x86 emulator: Move
string pio emulation into emulator.c"), but the prototype remained.
Remove its prototype.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
We currently use some ad-hoc arch variables tied to legacy KVM device
assignment to manage emulation of instructions that depend on whether
non-coherent DMA is present. Create an interface for this, adapting
legacy KVM device assignment and adding VFIO via the KVM-VFIO device.
For now we assume that non-coherent DMA is possible any time we have a
VFIO group. Eventually an interface can be developed as part of the
VFIO external user interface to query the coherency of a group.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Default to operating in coherent mode. This simplifies the logic when
we switch to a model of registering and unregistering noncoherent I/O
with KVM.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The gfn_to_index function relies on huge page defines which either may
not make sense on systems that don't support huge pages or are defined
in an unconvenient way for other architectures. Since this is
x86-specific, move the function to arch/x86/include/asm/kvm_host.h.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
kvm_mmu initialization is mostly filling in function pointers, there is
no way for it to fail. Clean up unused return values.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
The new_cr3 MMU callback has been a wrapper for mmu_free_roots since commit
e676505 (KVM: MMU: Force cr3 reload with two dimensional paging on mov
cr3 emulation, 2012-07-08).
The commit message mentioned that "mmu_free_roots() is somewhat of an overkill,
but fixing that is more complicated and will be done after this minimal fix".
One year has passed, and no one really felt the need to do a different fix.
Wrap the call with a kvm_mmu_new_cr3 function for clarity, but remove the
callback.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
The free MMU callback has been a wrapper for mmu_free_roots since mmu_free_roots
itself was introduced (commit 17ac10a, [PATCH] KVM: MU: Special treatment
for shadow pae root pages, 2007-01-05), and has always been the same for all
MMU cases. Remove the indirection as it is useless.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
This makes the interface more deterministic for userspace, which can expect
(after configuring only the features it supports) to get exactly the same
state from the kernel, independent of the host CPU and kernel version.
Suggested-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
A guest can still attempt to save and restore XSAVE states even if they
have been masked in CPUID leaf 0Dh. This usually is not visible to
the guest, but is still wrong: "Any attempt to set a reserved bit (as
determined by the contents of EAX and EDX after executing CPUID with
EAX=0DH, ECX= 0H) in XCR0 for a given processor will result in a #GP
exception".
The patch also performs the same checks as __kvm_set_xcr in KVM_SET_XSAVE.
This catches migration from newer to older kernel/processor before the
guest starts running.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
kvm_hc_kick_cpu allows the calling vcpu to kick another vcpu out of halt state.
the presence of these hypercalls is indicated to guest via
kvm_feature_pv_unhalt.
Fold pv_unhalt flag into GET_MP_STATE ioctl to aid migration
During migration, any vcpu that got kicked but did not become runnable
(still in halted state) should be runnable after migration.
Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Suzuki Poulose <suzuki@in.ibm.com>
[Raghu: Apic related changes, folding pvunhalted into vcpu_runnable
Added flags for future use (suggested by Gleb)]
[ Raghu: fold pv_unhalt flag as suggested by Eric Northup]
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Inject nEPT fault to L1 guest. This patch is original from Xinhao.
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Xinhao Xu <xinhao.xu@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The next patch will reuse it for other userspace exits than MMIO,
namely debug events.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
[KVM maintainers:
The underlying support for this is in perf/core now. So please merge
this patch into the KVM tree.]
This is not arch perfmon, but older CPUs will just ignore it. This makes
it possible to do at least some TSX measurements from a KVM guest
v2: Various fixes to address review feedback
v3: Ignore the bits when no CPUID. No #GP. Force raw events with TSX bits.
v4: Use reserved bits for #GP
v5: Remove obsolete argument
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull KVM fixes from Paolo Bonzini:
"On the x86 side, there are some optimizations and documentation
updates. The big ARM/KVM change for 3.11, support for AArch64, will
come through Catalin Marinas's tree. s390 and PPC have misc cleanups
and bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (87 commits)
KVM: PPC: Ignore PIR writes
KVM: PPC: Book3S PR: Invalidate SLB entries properly
KVM: PPC: Book3S PR: Allow guest to use 1TB segments
KVM: PPC: Book3S PR: Don't keep scanning HPTEG after we find a match
KVM: PPC: Book3S PR: Fix invalidation of SLB entry 0 on guest entry
KVM: PPC: Book3S PR: Fix proto-VSID calculations
KVM: PPC: Guard doorbell exception with CONFIG_PPC_DOORBELL
KVM: Fix RTC interrupt coalescing tracking
kvm: Add a tracepoint write_tsc_offset
KVM: MMU: Inform users of mmio generation wraparound
KVM: MMU: document fast invalidate all mmio sptes
KVM: MMU: document fast invalidate all pages
KVM: MMU: document fast page fault
KVM: MMU: document mmio page fault
KVM: MMU: document write_flooding_count
KVM: MMU: document clear_spte_count
KVM: MMU: drop kvm_mmu_zap_mmio_sptes
KVM: MMU: init kvm generation close to mmio wrap-around value
KVM: MMU: add tracepoint for check_mmio_spte
KVM: MMU: fast invalidate all mmio sptes
...
|
|
Document it to Documentation/virtual/kvm/mmu.txt
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Document write_flooding_count to Documentation/virtual/kvm/mmu.txt
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Document it to Documentation/virtual/kvm/mmu.txt
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop kvm_mmu_zap_mmio_sptes and use kvm_mmu_invalidate_zap_all_pages
instead to handle mmio generation number overflow
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch tries to introduce a very simple and scale way to invalidate
all mmio sptes - it need not walk any shadow pages and hold mmu-lock
KVM maintains a global mmio valid generation-number which is stored in
kvm->memslots.generation and every mmio spte stores the current global
generation-number into his available bits when it is created
When KVM need zap all mmio sptes, it just simply increase the global
generation-number. When guests do mmio access, KVM intercepts a MMIO #PF
then it walks the shadow page table and get the mmio spte. If the
generation-number on the spte does not equal the global generation-number,
it will go to the normal #PF handler to update the mmio spte
Since 19 bits are used to store generation-number on mmio spte, we zap all
mmio sptes when the number is round
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename X86_CR4_RDWRGSFS to X86_CR4_FSGSBASE to match the SDM.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Link: http://lkml.kernel.org/n/tip-buq1evi5dpykxx7ak6amaam0@git.kernel.org
|
|
As Marcelo pointed out that
| "(retention of large number of pages while zapping)
| can be fatal, it can lead to OOM and host crash"
We introduce a list, kvm->arch.zapped_obsolete_pages, to link all
the pages which are deleted from the mmu cache but not actually
freed. When page reclaiming is needed, we always zap this kind of
pages first.
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
The current kvm_mmu_zap_all is really slow - it is holding mmu-lock to
walk and zap all shadow pages one by one, also it need to zap all guest
page's rmap and all shadow page's parent spte list. Particularly, things
become worse if guest uses more memory or vcpus. It is not good for
scalability
In this patch, we introduce a faster way to invalidate all shadow pages.
KVM maintains a global mmu invalid generation-number which is stored in
kvm->arch.mmu_valid_gen and every shadow page stores the current global
generation-number into sp->mmu_valid_gen when it is created
When KVM need zap all shadow pages sptes, it just simply increase the
global generation-number then reload root shadow pages on all vcpus.
Vcpu will create a new shadow page table according to current kvm's
generation-number. It ensures the old pages are not used any more.
Then the obsolete pages (sp->mmu_valid_gen != kvm->arch.mmu_valid_gen)
are zapped by using lock-break technique
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
With VMX, enable_irq_window can now return -EBUSY, in which case an
immediate exit shall be requested before entering the guest. Account for
this also in enable_nmi_window which uses enable_irq_window in absence
of vnmi support, e.g.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
KVM guests today use 8bit APIC ids allowing for 256 ID's. Reserving one
ID for Broadcast interrupts should leave 255 ID's. In case of KVM there
is no need for reserving another ID for IO-APIC so the hard max limit for
VCPUS can be increased from 254 to 255. (This was confirmed by Gleb Natapov
http://article.gmane.org/gmane.comp.emulators.kvm.devel/99713 )
Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
|
|
The VMX implementation of enable_irq_window raised
KVM_REQ_IMMEDIATE_EXIT after we checked it in vcpu_enter_guest. This
caused infinite loops on vmentry. Fix it by letting enable_irq_window
signal the need for an immediate exit via its return value and drop
KVM_REQ_IMMEDIATE_EXIT.
This issue only affects nested VMX scenarios.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
The concept of routing interrupt lines to an irqchip is nothing
that is IOAPIC specific. Every irqchip has a maximum number of pins
that can be linked to irq lines.
So let's add a new define that allows us to reuse generic code for
non-IOAPIC platforms.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
|
|
As we may emulate the loading of EFER on VM-entry and VM-exit, implement
the checks that VMX performs on the guest and host values on vmlaunch/
vmresume. Factor out kvm_valid_efer for this purpose which checks for
set reserved bits.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Only deliver the posted interrupt when target vcpu is running
and there is no previous interrupt pending in pir.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
The "acknowledge interrupt on exit" feature controls processor behavior
for external interrupt acknowledgement. When this control is set, the
processor acknowledges the interrupt controller to acquire the
interrupt vector on VM exit.
After enabling this feature, an interrupt which arrived when target cpu is
running in vmx non-root mode will be handled by vmx handler instead of handler
in idt. Currently, vmx handler only fakes an interrupt stack and jump to idt
table to let real handler to handle it. Further, we will recognize the interrupt
and only delivery the interrupt which not belong to current vcpu through idt table.
The interrupt which belonged to current vcpu will be handled inside vmx handler.
This will reduce the interrupt handle cost of KVM.
Also, interrupt enable logic is changed if this feature is turnning on:
Before this patch, hypervior call local_irq_enable() to enable it directly.
Now IF bit is set on interrupt stack frame, and will be enabled on a return from
interrupt handler if exterrupt interrupt exists. If no external interrupt, still
call local_irq_enable() to enable it.
Refer to Intel SDM volum 3, chapter 33.2.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
guest state
During invalid guest state emulation vcpu cannot enter guest mode to try
to reexecute instruction that emulator failed to emulate, so emulation
will happen again and again. Prevent that by telling the emulator that
instruction reexecution should not be attempted.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
The variable kvm_rebooting is a common kvm variable, so move its
declaration from arch/x86/include/asm/kvm_host.h to
include/asm/kvm_host.h.
Fixes this sparse warning when building on arm64:
virt/kvm/kvm_main.c:warning: symbol 'kvm_rebooting' was not declared. Should it be static?
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
The variables vm_list and kvm_lock are common to all architectures, so
move the declarations from arch/x86/include/asm/kvm_host.h to
include/linux/kvm_host.h.
Fixes sparse warnings like these when building for arm64:
virt/kvm/kvm_main.c: warning: symbol 'kvm_lock' was not declared. Should it be static?
virt/kvm/kvm_main.c: warning: symbol 'vm_list' was not declared. Should it be static?
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
In order to migrate the PMU state correctly, we need to restore the
values of MSR_CORE_PERF_GLOBAL_STATUS (a read-only register) and
MSR_CORE_PERF_GLOBAL_OVF_CTRL (which has side effects when written).
We also need to write the full 40-bit value of the performance counter,
which would only be possible with a v3 architectural PMU's full-width
counter MSRs.
To distinguish host-initiated writes from the guest's, pass the
full struct msr_data to kvm_pmu_set_msr.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Merge reason:
From: Alexander Graf <agraf@suse.de>
"Just recently this really important patch got pulled into Linus' tree for 3.9:
commit 1674400aaee5b466c595a8fc310488263ce888c7
Author: Anton Blanchard <anton <at> samba.org>
Date: Tue Mar 12 01:51:51 2013 +0000
Without that commit, I can not boot my G5, thus I can't run automated tests on it against my queue.
Could you please merge kvm/next against linus/master, so that I can base my trees against that?"
* upstream/master: (653 commits)
PCI: Use ROM images from firmware only if no other ROM source available
sparc: remove unused "config BITS"
sparc: delete "if !ULTRA_HAS_POPULATION_COUNT"
KVM: Fix bounds checking in ioapic indirect register reads (CVE-2013-1798)
KVM: x86: Convert MSR_KVM_SYSTEM_TIME to use gfn_to_hva_cache functions (CVE-2013-1797)
KVM: x86: fix for buffer overflow in handling of MSR_KVM_SYSTEM_TIME (CVE-2013-1796)
arm64: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS
arm64: Do not select GENERIC_HARDIRQS_NO_DEPRECATED
inet: limit length of fragment queue hash table bucket lists
qeth: Fix scatter-gather regression
qeth: Fix invalid router settings handling
qeth: delay feature trace
sgy-cts1000: Remove __dev* attributes
KVM: x86: fix deadlock in clock-in-progress request handling
KVM: allow host header to be included even for !CONFIG_KVM
hwmon: (lm75) Fix tcn75 prefix
hwmon: (lm75.h) Update header inclusion
MAINTAINERS: Remove Mark M. Hoffman
xfs: ensure we capture IO errors correctly
xfs: fix xfs_iomap_eof_prealloc_initial_size type
...
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
(CVE-2013-1797)
There is a potential use after free issue with the handling of
MSR_KVM_SYSTEM_TIME. If the guest specifies a GPA in a movable or removable
memory such as frame buffers then KVM might continue to write to that
address even after it's removed via KVM_SET_USER_MEMORY_REGION. KVM pins
the page in memory so it's unlikely to cause an issue, but if the user
space component re-purposes the memory previously used for the guest, then
the guest will be able to corrupt that memory.
Tested: Tested against kvmclock unit test
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
When we create or move a memory slot, we need to zap mmio sptes.
Currently, zap_all() is used for this and this is causing two problems:
- extra page faults after zapping mmu pages
- long mmu_lock hold time during zapping mmu pages
For the latter, Marcelo reported a disastrous mmu_lock hold time during
hot-plug, which made the guest unresponsive for a long time.
This patch takes a simple way to fix these problems: do not zap mmu
pages unless they are marked mmio cached. On our test box, this took
only 50us for the 4GB guest and we did not see ms of mmu_lock hold time
any more.
Note that we still need to do zap_all() for other cases. So another
work is also needed: Xiao's work may be the one.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
This will be used not to zap unrelated mmu pages when creating/moving
a memory slot later.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
A VCPU sending INIT or SIPI to some other VCPU races for setting the
remote VCPU's mp_state. When we were unlucky, KVM_MP_STATE_INIT_RECEIVED
was overwritten by kvm_emulate_halt and, thus, got lost.
This introduces APIC events for those two signals, keeping them in
kvm_apic until kvm_apic_accept_events is run over the target vcpu
context. kvm_apic_has_events reports to kvm_arch_vcpu_runnable if there
are pending events, thus if vcpu blocking should end.
The patch comes with the side effect of effectively obsoleting
KVM_MP_STATE_SIPI_RECEIVED. We still accept it from user space, but
immediately translate it to KVM_MP_STATE_INIT_RECEIVED + KVM_APIC_SIPI.
The vcpu itself will no longer enter the KVM_MP_STATE_SIPI_RECEIVED
state. That also means we no longer exit to user space after receiving a
SIPI event.
Furthermore, we already reset the VCPU on INIT, only fixing up the code
segment later on when SIPI arrives. Moreover, we fix INIT handling for
the BSP: it never enter wait-for-SIPI but directly starts over on INIT.
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Neither vmx nor svm nor the common part may generate an error on
kvm_vcpu_reset. So drop the return code.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
