summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-09tcp: ioctl type SIOCOUTQNSD returns amount of data not sentMario Schuknecht
In contrast to SIOCOUTQ which returns the amount of data sent but not yet acknowledged plus data not yet sent this patch only returns the data not sent. For various methods of live streaming bitrate control it may be helpful to know how much data are in the tcp outqueue are not sent yet. Signed-off-by: Mario Schuknecht <m.schuknecht@dresearch.de> Signed-off-by: Steffen Sledz <sledz@dresearch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09ipv4: Lookup multicast routes by rtable using helper.David S. Miller
Create a common helper for this operation, since we do it identically in three spots. Suggested by Eric Dumazet. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09bonding: move procfs code into bond_procfs.cAmerigo Wang
V2: Move #ifdef CONFIG_PROC_FS into bonding.h, as suggested by David. bond_main.c is bloating, separate the procfs code out, move them to bond_procfs.c Signed-off-by: WANG Cong <amwang@redhat.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: kill the ST-Ericsson pipe controller KconfigRémi Denis-Courmont
This is now a run-time choice so that a single kernel can support both old and new generation ISI modems. Support for manually enabling the pipe flow is removed as it did not work properly, does not fit well with the socket API, and I am not aware of any use at the moment. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: support active connection without pipe controller on modemRémi Denis-Courmont
This provides support for newer ISI modems with no need for the earlier experimental compile-time alternative choice. With this, we can now use the same kernel and userspace with both types of modems. This also avoids confusing two different and incompatible state machines, actively connected vs accepted sockets, and adds connection response error handling (processing "SYN/RST" of sorts). Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: provide pipe socket option to retrieve the pipe identifierRémi Denis-Courmont
User-space sometimes needs this information. In particular, the GPRS context or the AT commands pipe setups may use the pipe handle as a reference. This removes the settable pipe handle with CONFIG_PHONET_PIPECTRLR. It did not handle error cases correctly. Furthermore, the kernel *could* implement a smart scheme for allocating handles (if ever needed), but userspace really cannot. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: allocate sock from accept syscall rather than soft IRQRémi Denis-Courmont
This moves most of the accept logic to process context like other socket stacks do. Then we can use a few more common socket helpers and simplify a bit. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: factor common code to send control messagesRémi Denis-Courmont
With the addition of the pipe controller, there is now quite a bit of repetitive code for small signaling messages. Lets factor it. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: correct pipe backlog callback return valuesRémi Denis-Courmont
In some cases, the Phonet pipe backlog callbacks returned negative errno instead of NET_RX_* values. In other cases, NET_RX_DROP was returned for invalid packets, even though it seems only intended for buffering problems (not for deliberately discarded packets). Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: return an error when packet TX failsRémi Denis-Courmont
Phonet assumes that packets are never dropped. We try our best to avoid this situation. But lets return ENOBUFS if queueing to the network device fails so that the caller knows things went wrong. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: fix NULL dereference on TX path with implicit sourceRémi Denis-Courmont
The previous Phonet patch series introduced per-socket implicit destination (i.e. connect()). In that case, the destination socket address is NULL in the transmit function. However commit a8059512b120362b15424f152b2548fe8b11bd0c ("Phonet: implement per-socket destination/peer address") is incomplete and would trigger a NULL dereference. (Fortunately, the code is not in released kernel, and in fact currently not reachable.) Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08inetpeer: Don't disable BH for initial fast RCU lookup.David S. Miller
If modifications on other cpus are ok, then modifications to the tree during lookup done by the local cpu are ok too. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08ixgbe: fix compile failure in ixgbe_init_mbx_params_pfAndy Gospodarek
This commit: commit d7c8a29fc8bd20ba45ec2f52577ed04a988a9500 Author: Emil Tantilov <emil.s.tantilov@intel.com> Date: Thu Mar 3 09:25:02 2011 +0000 ixgbe: improve logic in ixgbe_init_mbx_params_pf incorrectly added a line that accessed mbx->udelay. I'm sure the intent was mbx->usec_delay. This patch fixes the compilation error. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08dsa/mv88e6060: support nonzero mii base addressPeter Korsgaard
The mv88e6060 uses either the lower 16 or upper 16 mii addresses, depending on the value of the EE_CLK/ADDR4 pin. Support both configurations by using the sw_addr setting as base address. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6
2011-03-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6
2011-03-08ipv4: Fix scope value used in route src-address caching.David S. Miller
We have to use cfg->fc_scope not the final nh_scope value. Reported-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07ipv4: Cache source address in nexthop entries.David S. Miller
When doing output route lookups, we have to select the source address if the user has not specified an explicit one. First, if the route has an explicit preferred source address specified, then we use that. Otherwise we search the route's outgoing interface for a suitable address. This search can be precomputed and cached at route insertion time. The only missing part is that we have to refresh this precomputed value any time addresses are added or removed from the interface, and this is accomplished by fib_update_nh_saddrs(). Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07ixgbe: fix setting and reporting of advertised speedsEmil Tantilov
Add the ability to set 100/F on x540. Fix reporting of advertised modes by adding check for phy.autoneg_advertised Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-07ixgbe: fix spelling errorsEmil Tantilov
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-07ixgbe: improve logic in ixgbe_init_mbx_params_pfEmil Tantilov
Use if/then instead of an all-inclusive case statement. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-07ixgbe: add function descriptionEmil Tantilov
Add description for ixgbe_init_eeprom_params_X540 and whitespace fix. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-07ixgbe: Enable flow control pause parameter auto-negotiation supportEmil Tantilov
This patch enables flow control pause parameters auto-negotiation support to 82599 based 10G Base-T, backplane devices and multi-speed fiber optics modules at 1G speed Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-07ixgbe: Add x540 statistic counter definitionsEmil Tantilov
Add defines to accumulate and display x540 PHY statistic counters on transmit/receive. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-07ixgbe: clear correct counters for flow control on 82599Emil Tantilov
The 82599 was not correctly having some of it's counters cleared for flow control. This change corrects that. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-07ixgbe: cleanup PHY initEmil Tantilov
This change cleans up several situations in which we were either stepping over possible errors, or calling initialization routines multiple times. Also includes whitespace fixes where applicable. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-07ixgbe: add support to FCoE DDP in target modeYi Zou
Add support to the ndo_fcoe_ddp_target() to allow the Intel 82599 device to also provide DDP offload capability when the upper FCoE protocol stack is operating as a target. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-07vlan: add support to ndo_fcoe_ddp_target()Yi Zou
Add the new target ddp offload support ndo_fcoe_ddp_target(). Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-07net: add ndo_fcoe_ddp_target() to support FCoE DDP in target modeYi Zou
The Fiber Channel over Ethernet (FCoE) Direct Data Placement (DDP) can also be used for FCoE target, where the DDP used for read I/O on an initiator can be used on an FCoE target to speed up the write I/O to the target from the initiator. The added ndo_fcoe_ddp_target() works in the similar way as the existing ndo_fcoe_ddp_setup() to allow the underlying hardware set up the DDP context accordingly when it gets called from the FCoE target implementation on top the existing Open-FCoE fcoe/libfc protocol stack so without losing the ability to provide DDP for read I/O as an initiator, it can also provide DDP offload to the write I/O coming from the initiator as a target. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-07ixgbe: fix missing function pointer conversionDon Skidmore
In the previous commit: commit 5e655105e3e19d746f9e95c514b014c11c3d1b6a Author: Don Skidmore <donald.c.skidmore@intel.com> Date: Fri Feb 25 01:58:04 2011 +0000 ixgbe: add function pointer for semaphore function there was one release of the semaphore function call which did not get converted to a function pointer. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-07igb: Add stats output for OS2BMC feature on i350 devicesCarolyn Wyborny
This patch adds statistics output for OS2BMC feature which is configured by eeprom on capable devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-07e1000e: fix build issue due to undefined reference to crc32_leEmil Tantilov
kernel build fails with: drivers/built-in.o: In function `e1000_lv_jumbo_workaround_ich8lan': (.text+0x3e7a8): undefined reference to `crc32_le' when CONFIG_CRC32 is not set or does not match the CONFIG_E1000E selection. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-07af_unix: remove unused struct sockaddr_un cruftHagen Paul Pfeifer
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07sctp: several declared/set but unused fixesHagen Paul Pfeifer
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07af_packet: struct socket declared/assigned but unusedHagen Paul Pfeifer
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07mcast: net_device dev not usedHagen Paul Pfeifer
ip6_mc_source(), ip6_mc_msfilter() as well as ip6_mc_msfget() declare and assign dev but do not use the variable afterwards. Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07s2io: fix uninitialized compile warningShan Wei
drivers/net/s2io.c:7559: warning: ‘tcp_len’ may be used uninitialized in this function Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07bonding: COW before overwriting the destination MAC addressChangli Gao
When there is a ptype handler holding a clone of this skb, whose destination MAC addresse is overwritten, the owner of this handler may get a corrupted packet. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07bonding: remove the unused dummy functions when net poll controller isn't ↵Changli Gao
enabled These two functions are only used when net poll controller is enabled. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07Merge branch 'davem-next.r8169' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6
2011-03-07net: allow handlers to be processed for orig_devJiri Pirko
This was there before, I forgot about this. Allows deliveries to ptype_base handlers registered for orig_dev. I presume this is still desired. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07be2net: Add multicast filter capability for LancerPadmanabh Ratnakar
Lancer requires multicast capability flag set during IFACE_CREATE for adding multicast filters. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07be2net: Disarm CQ and EQ to disable interrupt in LancerPadmanabh Ratnakar
For Lancer disable interrupts in close by disarming CQs and EQs. Change the order of calls in be_close to achieve the correct result. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07be2net: Remove TX Queue stop in closePadmanabh Ratnakar
Remove TX Queue stop in close Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07be2net: Change f/w command versions for LancerPadmanabh Ratnakar
Change f/w command versions for Lancer Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07be2net: Add error recovery during load for LancerPadmanabh Ratnakar
Add error recovery during load for Lancer Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07be2net: Checksum field valid only for TCP/UDPPadmanabh Ratnakar
L4 checksum field is valid only for TCP/UDP packets in Lancer Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07be2net: Remove ERR compl workaround for LancerPadmanabh Ratnakar
Workaround added for Lancer in handling RX ERR completion received when no RX buffers are posted is not needed. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07ipv4: Inline fib_semantic_match into check_leafDavid S. Miller
This elimiates a lot of pure overhead due to parameter passing. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07ipv4: Validate route entry type at insert instead of every lookup.David S. Miller
fib_semantic_match() requires that if the type doesn't signal an automatic error, it must be of type RTN_UNICAST, RTN_LOCAL, RTN_BROADCAST, RTN_ANYCAST, or RTN_MULTICAST. Checking this every route lookup is pointless work. Instead validate it during route insertion, via fib_create_info(). Also, there was nothing making sure the type value was less than RTN_MAX, so add that missing check while we're here. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2025-06-02 12:49:42 +0000