summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-05-07dma: ste_dma40: Fixup system suspend/resumeUlf Hansson
Make sure to handle register context save/restore when needed from system PM callbacks. Previously we solely trusted the device to reside in in-active state while the system suspend callback were invoked, which is just too optimistic. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07dma: ste_dma40: Convert to PM macros while providing the PM callbacksUlf Hansson
Converting to the PM macros makes us simplify and remove some code. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07dma: ste_dma40: Don't require CONFIG_PM_RUNTIMEUlf Hansson
While probing, don't rely on CONFIG_PM_RUNTIME to be configured. Instead, let's power up the device and make it fully operational. Update the runtime PM status to reflect the active state. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07dma: ste_dma40: Maintain spinlock order while handling pauseUlf Hansson
The runtime PM resume callback needs to be executed while holding the spinlock, make sure to maintain this for the pause operation as well. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07dmaengine: dw: convert to use SET_LATE_SYSTEM_SLEEP_PM_OPSAndy Shevchenko
The commit 4501fe61 "dma: dw: Add suspend and resume handling for PCI mode DW_DMAC." introduces system power management callbacks. Regarding to commit f78c4cff "PM / Sleep: Add macro to define common late/early system PM callbacks" we have nice macro to setup dev_pm_ops structure. This patch converts a driver to use the macro. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07dmaengine: dw: move PM to suspend_late / resume_early stagesAndy Shevchenko
There is no need to use *_noirq version of suspend and resume PM callbacks. The suspend_late / resume_early suit better (it was discussed in [1]) and in future could be used for runtime PM support. [1] http://www.spinics.net/lists/kernel/msg1650974.html Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02dma: mpc512x: fix freeing resources in mpc_dma_probe() and mpc_dma_remove()Alexander Popov
Fix mpc_dma_probe() error path and mpc_dma_remove(): manually free IRQs and dispose IRQ mappings before devm_* takes care of other resources. Moreover replace devm_request_irq() with request_irq() since there is no need to use it because the original code always frees IRQ manually with devm_free_irq(). Replace devm_free_irq() with free_irq() accordingly. Signed-off-by: Alexander Popov <a13xp0p0v88@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02dma: mpc512x: separate 'compatible' values for MPC512x and MPC8308Alexander Popov
MPC512x and MPC8308 have similar DMA controllers, but are independent SoCs. DMA controller driver should have separate 'compatible' values for these SoCs. Signed-off-by: Alexander Popov <a13xp0p0v88@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02dma: mpc512x: reorder mpc8308 specific instructionsAlexander Popov
Concentrate the specific code for MPC8308 in the 'if' branch and handle MPC512x in the 'else' branch. This modification only reorders instructions but doesn't change behaviour. Signed-off-by: Alexander Popov <a13xp0p0v88@gmail.com> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02DMA: Freescale: move functions to avoid forward declarationsHongbo Zhang
These functions will be modified in the next patch in the series. By moving the function in a patch separate from the changes, it will make review easier. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Qiang Liu <qiang.liu@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02DMA: Freescale: add fsl_dma_free_descriptor() to reduce code duplicationHongbo Zhang
There are several places where descriptors are freed using identical code. This patch puts this code into a function to reduce code duplication. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Qiang Liu <qiang.liu@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02DMA: Freescale: remove attribute DMA_INTERRUPT of dmaengineHongbo Zhang
Delete attribute DMA_INTERRUPT because fsldma doesn't support this function, exception will be thrown if talitos is used to offload xor at the same time. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Qiang Liu <qiang.liu@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02DMA: Freescale: unify register access methodsHongbo Zhang
Methods of accessing DMA controller registers are inconsistent, some registers are accessed by DMA_IN/OUT directly, while others are accessed by functions get/set_* which are wrappers of DMA_IN/OUT, and even for the BCR register, it is read by get_bcr but written by DMA_OUT. This patch unifies the inconsistent methods, all registers are accessed by get/set_* now. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02DMA: Freescale: remove the unnecessary FSL_DMA_LD_DEBUGHongbo Zhang
Some codes are calling chan_dbg with FSL_DMA_LD_DEBUG surrounded, it is really unnecessary to use such a macro because chan_dbg is a wrapper of dev_dbg, we do have corresponding DEBUG macro to switch on/off dev_dbg, and most of the other codes are also calling chan_dbg directly without using FSL_DMA_LD_DEBUG. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02DMA: shdma: add cyclic transfer supportKuninori Morimoto
This patch add cyclic transfer support and enables dmaengine_prep_dma_cyclic() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [reflown changelog for readablity] Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02DMA: shdma: tidyup callback chunk finderKuninori Morimoto
Current shdma is using "last" which indicates last desc which needs to have callback function. But that desc's chunks is always 1, we can use it as finder Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [reflown changelog for readablity] Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02dma: mmp_pdma: Fix physical channel memory allocation sizeLaurent Pinchart
Use sizeof(*var) instead of sizeof(type) when calling devm_k*alloc(). This avoids using the wrong type as was done to allocate the physical channels array. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02dma: mmp_pdma: Simplify access to channel drcmr valueLaurent Pinchart
As the physical channel and virtual channel point to each other, pchan->phy->vchan is always equal to pchan. Simplify the code accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02dma: mmp_pdma: Fix the #dma-channels DT property documentationLaurent Pinchart
The property is optional and defaults to 32. Document it as such. Cc: devicetree@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-30dmaengine: edma: update DMA memcpy to use new param elementJoel Fernandes
edma param struct is now within an edma_pset struct introduced in Thomas Gleixner's edma tx status series. Update memcpy function for the same. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-30dmaengine: edma: Document variables used for residue accountingJoel Fernandes
The granular residue accounting code uses certain variables specifically for residue accounting. Document these in the structure declaration. Also move around some elements and group them together. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-30dmaengine: edma: Provide granular accountingThomas Gleixner
The first slot in the ParamRAM of EDMA holds the current active subtransfer. Depending on the direction we read either the source or the destination address from there. In the internal psets we have the address of the buffer(s). In the cyclic case we only use the internal pset[0] which holds the start address of the circular buffer and calculate the remaining room to the end of the buffer. In the SG case we read the current address and compare it to the internal psets address and length. - If the current address is outside of this range, the pset has been processed already and we mark it done, update the residue_stat value and process the next set. That avoids that we need to walk all processed psets for every invocation of tx_status. - If its inside the range we know that we look at the current active set and stop the walk. - In case of intermediate transfers we update the stats in the interrupt callback function before starting the next batch of transfers. The tx_status callback and the interrupt callback are serialized via vchan.lock. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [joelf@ti.com: Hunk #2 in original patch manually applied] Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-30dmaengine: edma: Make reading the position of active channels workThomas Gleixner
As Joel pointed out, edma_read_position() uses memcpy_fromio() to read the parameter ram. That's not synchronized with the internal update as it does a byte by byte copy. We need to do a 32bit read to get a consistent value. Further reading destination and source is pointless. In DEV_TO_MEM transfers we are only interested in the destination, in MEM_TO_DEV we care about the source. In MEM_TO_MEM it really does not matter which one you read. Simple solution: Remove the pointers, select dest/source via a bool and return the read value. Remove the export of this function while at it. The only potential user is the dmaengine and that's always builtin. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-30dmaengine: edma: Store transfer data in edma_desc and edma_psetThomas Gleixner
For granular accounting we need to store the direction and the information for the individual psets: - source or destination address, depending on direction - length Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-30dmaengine: edma: Create private pset structThomas Gleixner
Preparatory patch to support finer grained accounting. Move the edma_params array out of edma_desc so we can add further per pset data to it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [joelf@ti.com: Fixed up hunk #3 in original patch to apply] Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-30dmaengine: edma: Check the current decriptor first in tx_status()Thomas Gleixner
It's likely that the caller investigates the status of a currently active descriptor. Make that simple check first and only rumage in the vchan list if that fails. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-30dmaengine: edma: Sanitize residue reportingThomas Gleixner
The residue reporting in edma_tx_status() is just broken. It blindly walks the psets and recalculates the lenght of the transfer from the hardware parameters. For cyclic transfers it adds the link pset, which results in interestingly large residues. For non-cyclic it adds the dummy pset, which is stupid as well. Aside of that it's silly to walk through the pset params when the per descriptor residue is known at the point of creating it. Store the information in edma_desc and use it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-29dmaengine: edma: Add channel number to debug printsPeter Ujfalusi
It helps to identify issues if we have some information regarding to the channel which the event is associated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-23dmaengine: edma: No need save/restore interrupt flags during spin_lock in IRQJoel Fernandes
The vchan lock in edma_callback is acquired in hard interrupt context. As interrupts are already disabled, there's no point in save/restoring interrupt mask bit or cpsr flags. Get rid of flags local variable and use spin_lock instead of spin_lock_irqsave. Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-22dmaengine: edma: Add DMA memcpy supportJoel Fernandes
We add DMA memcpy support to EDMA driver. Successful tests performed using dmatest kernel module. Copy alignment is set to DMA_SLAVE_BUSWIDTH_4_BYTES and users must ensure length is aligned so that copy is performed fully. Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-22dmaengine: edma: Print the direction value as well when it is not supportedPeter Ujfalusi
In case of not supported direction it is better to print the direction also. It is unlikely, but in such an event it helps with the debugging. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Joel Fernandes <joelf@ti.com> Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-22dmaengine: edma: Prefix debug prints where the text were identical in prep ↵Peter Ujfalusi
callbacks prep_slave_sg and prep_dma_cyclic callbacks have mostly same failure cases with the same texts printed in case we hit them. It helps when debugging if we know exactly which callback generated the errors. At the same time change the debug level for descriptor allocation failure from dbg to err since all other error cases are dev_err and this failure is similarly fatal as the other ones. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Joel Fernandes <joelf@ti.com> Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-22dmaengine: edma: Implement device_slave_caps callbackPeter Ujfalusi
With the callback implemented omap-dma can provide information to client drivers regarding to supported address widths, directions, residue granularity, etc. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Joel Fernandes <joelf@ti.com> Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-22dmaengine: edma: Reduce debug print verbosity for non verbose debuggingPeter Ujfalusi
Do not print the paRAM information when verbose debugging is not asked and also reduce the number of lines printed in edma_prep_dma_cyclic() Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Joel Fernandes <joelf@ti.com> Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-22dmaengine: edma: Set DMA_CYCLIC capability flagPeter Ujfalusi
Indicate that the edma dmaengine driver has support for cyclic mode. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Joel Fernandes <joelf@ti.com> Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-22dmaengine: edma: Add support for DMA_PAUSE/RESUME operationPeter Ujfalusi
Pause/Resume can be used by the audio stack when the stream is paused/resumed The edma platform code has support for this and the legacy audio stack used this. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Joel Fernandes <joelf@ti.com> Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-22dmaengine: edma: Correct the handling of src/dst_maxburst == 0Peter Ujfalusi
When clients asks for maxburst = 0 it is basically the same case as if they were asking for maxburst = 1 since in both case ASYNC need to be used and the eDMA is expected to write/read one word per DMA request. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Joel Fernandes <joelf@ti.com> Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-22arm: common: edma: Save the number of event queues/TCsPeter Ujfalusi
For later use save the number of queues available for the CC. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Joel Fernandes <joelf@ti.com> Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-22platform_data: edma: Be precise with the paRAM structPeter Ujfalusi
The edmacc_param struct should follow the layout of the paRAM area in the HW. Be explicit on the size of the fields (u32) and also mark the struct as packed to avoid any padding on non 32bit architectures. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Joel Fernandes <joelf@ti.com> Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-20Linux 3.15-rc2v3.15-rc2Linus Torvalds
2014-04-20Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine fixes from Vinod Koul: "Back from long weekend here in India and now the time to send fixes for slave dmaengine. - Dan's fix of sirf xlate code - Jean's fix for timberland - edma fixes by Sekhar for SG handling and Yuan for changing init call" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: fix eDMA driver as a subsys_initcall dmaengine: sirf: off by one in of_dma_sirfsoc_xlate() platform: Fix timberdale dependencies dma: edma: fix incorrect SG list handling
2014-04-20Merge tag 'iommu-fixes-v3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "Fixes for regressions: - fix wrong IOMMU enumeration causing some SCSI device drivers initialization failures - ARM-SMMU fixes for a panic condition and a wrong return value" * tag 'iommu-fixes-v3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: fix panic in arm_smmu_alloc_init_pte iommu/arm-smmu: Return 0 on unmap failure iommu/vt-d: fix bug in matching PCI devices with DRHD/RMRR descriptors iommu/vt-d: Fix get_domain_for_dev() handling of upstream PCIe bridges iommu/vt-d: fix memory leakage caused by commit ea8ea46
2014-04-20Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Ingo Molnar: "Three small tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Improve error reporting perf tools: Adjust symbols in VDSO perf kvm: Fix 'Min time' counting in report command
2014-04-20Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent Pull perf/urgent fixes from Jiri Olsa: User visible changes: * Adjust symbols in VDSO to properly resolve its function names (Vladimir Nikulichev) * Improve error reporting for record session failure (Adrien BAK) * Fix 'Min time' counting in report command (Alexander Yarygin) Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-20perf tools: Improve error reportingAdrien BAK
In the current version, when using perf record, if something goes wrong in tools/perf/builtin-record.c:375 session = perf_session__new(file, false, NULL); The error message: "Not enough memory for reading per file header" is issued. This error message seems to be outdated and is not very helpful. This patch proposes to replace this error message by "Perf session creation failed" I believe this issue has been brought to lkml: https://lkml.org/lkml/2014/2/24/458 although this patch only tackles a (small) part of the issue. Additionnaly, this patch improves error reporting in tools/perf/util/data.c open_file_write. Currently, if the call to open fails, the user is unaware of it. This patch logs the error, before returning the error code to the caller. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Adrien BAK <adrien.bak@metascale.org> Link: http://lkml.kernel.org/r/1397786443.3093.4.camel@beast [ Reorganize the changelog into paragraphs ] [ Added empty line after fd declaration in open_file_write ] Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-04-20perf tools: Adjust symbols in VDSOVladimir Nikulichev
pert-report doesn't resolve function names in VDSO: $ perf report --stdio -g flat,0.0,15,callee --sort pid ... 8.76% 0x7fff6b1fe861 __gettimeofday ACE_OS::gettimeofday() ... In this case symbol values should be adjusted the same way as for executables, relocatable objects and prelinked libraries. After fix: $ perf report --stdio -g flat,0.0,15,callee --sort pid ... 8.76% __vdso_gettimeofday __gettimeofday ACE_OS::gettimeofday() Signed-off-by: Vladimir Nikulichev <nvs@tbricks.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/r/969812.163009436-sendEmail@nvs Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-04-20perf kvm: Fix 'Min time' counting in report commandAlexander Yarygin
Every event in the perf-kvm has a 'stats' structure, which contains max/min/average/etc times of handling this event. The problem is that the 'perf-kvm stat report' command always shows that 'min time' is 0us for every event. Example: # perf kvm stat report Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time [..] 0xB2 MSCH 12 0.07% 0.00% 0us 8us 7.31us ( +- 2.11% ) 0xB2 CHSC 12 0.07% 0.00% 0us 18us 9.39us ( +- 9.49% ) 0xB2 STPX 8 0.05% 0.00% 0us 2us 1.88us ( +- 7.18% ) 0xB2 STSI 7 0.04% 0.00% 0us 44us 16.49us ( +- 38.20% ) [..] This happens because the 'stats' structure is not initialized and stats->min equals to 0. Lets initialize the structure for every event after its allocation using init_stats() function. This initializes stats->min to -1 and makes 'Min time' statistics counting work: # perf kvm stat report Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time [..] 0xB2 MSCH 12 0.07% 0.00% 6us 8us 7.31us ( +- 2.11% ) 0xB2 CHSC 12 0.07% 0.00% 7us 18us 9.39us ( +- 9.49% ) 0xB2 STPX 8 0.05% 0.00% 1us 2us 1.88us ( +- 7.18% ) 0xB2 STSI 7 0.04% 0.00% 1us 44us 16.49us ( +- 38.20% ) [..] Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1397053319-2130-3-git-send-email-borntraeger@de.ibm.com [ Fixing the perf examples changelog output ] Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-04-19coredump: fix va_list corruptionEric Dumazet
A va_list needs to be copied in case it needs to be used twice. Thanks to Hugh for debugging this issue, leading to various panics. Tested: lpq84:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern 'produce_core' is simply : main() { *(int *)0 = 1;} lpq84:~# ./produce_core Segmentation fault (core dumped) lpq84:~# dmesg | tail -1 [ 614.352947] Core dump to |/foobar12345 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 (null) pipe failed Notice the last argument was replaced by a NULL (we were lucky enough to not crash, but do not try this on your production machine !) After fix : lpq83:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern lpq83:~# ./produce_core Segmentation fault lpq83:~# dmesg | tail -1 [ 740.800441] Core dump to |/foobar12345 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 pipe failed Fixes: 5fe9d8ca21cc ("coredump: cn_vprintf() has no reason to call vsnprintf() twice") Signed-off-by: Eric Dumazet <edumazet@google.com> Diagnosed-by: Hugh Dickins <hughd@google.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-19Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "This fixes the preemption-count imbalance crash reported by Owen Kibel" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Fix CMCI preemption bugs
2014-04-19Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Two fixes: - a SCHED_DEADLINE task selection fix - a sched/numa related lockdep splat fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Check for stop task appearance when balancing happens sched/numa: Fix task_numa_free() lockdep splat
generated by cgit v1.2.3 (git 2.0.4) at 2025-05-11 12:01:43 +0000