summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-05-13net: Use fwmark reflection in PMTU discovery.Lorenzo Colitti
Currently, routing lookups used for Path PMTU Discovery in absence of a socket or on unmarked sockets use a mark of 0. This causes PMTUD not to work when using routing based on netfilter fwmark mangling and fwmark ip rules, such as: iptables -j MARK --set-mark 17 ip rule add fwmark 17 lookup 100 This patch causes these route lookups to use the fwmark from the received ICMP error when the fwmark_reflect sysctl is enabled. This allows the administrator to make PMTUD work by configuring appropriate fwmark rules to mark the inbound ICMP packets. Black-box tested using user-mode linux by pointing different fwmarks at routing tables egressing on different interfaces, and using iptables mangling to mark packets inbound on each interface with the interface's fwmark. ICMPv4 and ICMPv6 PMTU discovery work as expected when mark reflection is enabled and fail when it is disabled. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: add a sysctl to reflect the fwmark on repliesLorenzo Colitti
Kernel-originated IP packets that have no user socket associated with them (e.g., ICMP errors and echo replies, TCP RSTs, etc.) are emitted with a mark of zero. Add a sysctl to make them have the same mark as the packet they are replying to. This allows an administrator that wishes to do so to use mark-based routing, firewalling, etc. for these replies by marking the original packets inbound. Tested using user-mode linux: - ICMP/ICMPv6 echo replies and errors. - TCP RST packets (IPv4 and IPv6). Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13Merge branch 'arc_emac-next'David S. Miller
Beniamino Galvani says: ==================== arc_emac: promiscuous/multicast mode and netpoll support These patches add support for promiscuous mode, multicast filtering and netpoll to the ARC EMAC driver. They were both tested on a Radxa Rock board which uses a ARC EMAC IP core integrated in the Rockchip RK3188 SoC. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13arc_emac: add netpoll supportBeniamino Galvani
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13arc_emac: implement promiscuous mode and multicast filteringBeniamino Galvani
This patch implements the set_rx_mode function to enable/disable promiscuous or all-multicast modes and to update the multicast filtering list of the device. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13Merge branch 'tcp-fastopen-ipv6'David S. Miller
Yuchung Cheng says: ==================== tcp: IPv6 support for fastopen server This patch series add IPv6 support for fastopen server. To minimize code duplication in IPv4 and IPv6, the current v4 only code is refactored and common code is moved into net/ipv4/tcp_fastopen.c. Also the current code uses a different function from tcp_v4_send_synack() to send the first SYN-ACK in fastopen. The new code eliminates this separate function by refactoring the child-socket and syn-ack creation code. After these refactoring in the first four patches, we can easily add the fastopen code in IPv6 by changing corresponding IPv6 functions. Note Fast Open client already supports IPv6. This patch is for the server-side (passive open) IPv6 support only. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13tcp: IPv6 support for fastopen serverDaniel Lee
After all the preparatory works, supporting IPv6 in Fast Open is now easy. We pretty much just mirror v4 code. The only difference is how we generate the Fast Open cookie for IPv6 sockets. Since Fast Open cookie is 128 bits and we use AES 128, we use CBC-MAC to encrypt both the source and destination IPv6 addresses since the cookie is a MAC tag. Signed-off-by: Daniel Lee <longinus00@gmail.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Jerry Chu <hkchu@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13tcp: improve fastopen icmp handlingYuchung Cheng
If a fast open socket is already accepted by the user, it should be treated like a connected socket to record the ICMP error in sk_softerr, so the user can fetch it. Do that in both tcp_v4_err and tcp_v6_err. Also refactor the sequence window check to improve readability (e.g., there were two local variables named 'req'). Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Daniel Lee <longinus00@gmail.com> Signed-off-by: Jerry Chu <hkchu@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13tcp: use tcp_v4_send_synack on first SYN-ACKYuchung Cheng
To avoid large code duplication in IPv6, we need to first simplify the complicate SYN-ACK sending code in tcp_v4_conn_request(). To use tcp_v4(6)_send_synack() to send all SYN-ACKs, we need to initialize the mini socket's receive window before trying to create the child socket and/or building the SYN-ACK packet. So we move that initialization from tcp_make_synack() to tcp_v4_conn_request() as a new function tcp_openreq_init_req_rwin(). After this refactoring the SYN-ACK sending code is simpler and easier to implement Fast Open for IPv6. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Daniel Lee <longinus00@gmail.com> Signed-off-by: Jerry Chu <hkchu@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13tcp: simplify fast open cookie processingYuchung Cheng
Consolidate various cookie checking and generation code to simplify the fast open processing. The main goal is to reduce code duplication in tcp_v4_conn_request() for IPv6 support. Removes two experimental sysctl flags TFO_SERVER_ALWAYS and TFO_SERVER_COOKIE_NOT_CHKD used primarily for developmental debugging purposes. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Daniel Lee <longinus00@gmail.com> Signed-off-by: Jerry Chu <hkchu@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13tcp: move fastopen functions to tcp_fastopen.cYuchung Cheng
Move common TFO functions that will be used by both v4 and v6 to tcp_fastopen.c. Create a helper tcp_fastopen_queue_check(). Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Daniel Lee <longinus00@gmail.com> Signed-off-by: Jerry Chu <hkchu@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13Merge branch 'cdc_mbim-next'David S. Miller
Bjørn Mork says: ==================== cdc_mbim: cleanups and new features This series depends on commit 6b5eeb7f874b ("net: cdc_mbim: handle unaccelerated VLAN tagged frames"), which is currently in "net" but not yet in "net-next". Patch 4 might have a minor context collision with the "cdc_ncm: add buffer tuning and stats using ethtool" series I just posted for review. Please let me know if I should submit an adjusted version in either direction. These two series' are otherwise completely independent of each other. The major new feature here is in patch 1, which I hope will solve some problems with the original design without changing the existing API, optionally allowing IP session 0 to be treated like any other MBIM session. The rest are some minor cleanups and finally some documentation of the current driver APIs, after this series has been applied. I started feeling a bit more mortal than usual lately, which probably is healthy, and realized that I should put some of the stuff in my head in a somewhat less volatile storage. v2: Fixed patch 1 so that it actually does what it claims to do. This time it is even tested for functionality, and not just build tested... ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: cdc_ncm/cdc_mbim: rework probing of NCM/MBIM functionsBjørn Mork
The NCM class match in the cdc_mbim driver is confusing and cause unexpected behaviour. The USB core guarantees that a USB interface is in altsetting 0 when probing starts. This means that devices implementing a NCM 1.0 backwards compatible MBIM function (a "NCM/MBIM function") always hit the NCM entry in the cdc_mbim driver match table. Such functions will never match any of the MBIM entries. This causes unexpeced behaviour for cases where the NCM and MBIM entries are differet, which is currently the case for all except Ericsson devices. Improve the probing of NCM/MBIM functions by looking up the device again in the cdc_mbim match table after switching to the MBIM identity. The shared altsetting selection is updated to better accommodate the new probing logic, returning the preferred altsetting for the control interface instead of the data interface. The control interface altsetting update is moved to the cdc_mbim driver. It is never necessary to change the control interface altsetting for NCM. Cc: Greg Suarez <gsuarez@smithmicro.com> Reported by: Yu-an Shih <yshih@nvidia.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: cdc_mbim: add driver documentationBjørn Mork
An initial attempt on describing some of the odd APIs provided by this driver. Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: cdc_mbim: reject IP packets on DSS VLANsBjørn Mork
DSS VLANs are pseudo network interfaces representing arbitrary data streams, and specifically not IP. Preventing spurious IP packets can sometimes be a hassle. The kernel will for example send an IPv6 Router Solicit when the interface is brought up unless the user has been careful enough to disable IPv6 first. Such packets forwared to a MBIM DSS session will look like spurious noise to the device, and can cause it to log an error or even malfunction. Drop all IP packets on the designated DSS VLANs to prevent such unwanted spurious transmissions. Cc: Greg Suarez <gsuarez@smithmicro.com> Reported-by: Arnaud Desmier <adesmier@sequans.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: cdc_mbim: optionally use VLAN ID 4094 for IP session 0Bjørn Mork
The cdc_mbim driver maps 802.1q VLANs to MBIM IP and DSS sessions. MBIM IP session 0 is handled as an exception and is mapped to untagged frames. This patch adds optional support for remapping MBIM IP session 0 to 802.1q VLAN ID 4094 instead. The default behaviour is not changed. The new behaviour is triggered by adding a link for this previously unsupported VLAN. The untagged mapping was chosen initially to support the assumed most common use case: Most current MBIM devices only support a single IP session (i.e. session 0 only), and using untagged frames lets the users completely ignore the additonal complexity of the multiplexing layer. But when the multiplexing features of MBIM are used, then this netdev gets a double meaning: It becomes the master interface for all the VLAN subdevs the additional sessions are mapped to, while still serving as the untagged IP interface for session 0. This can be problematic, especially when using Device Service Streams (DSS), as have become apparent recently with the availability of devices with real DSS support. Some use cases need to e.g set a MTU which is higher than allowed for IP Session 0. The dual role also leads to the situation where the IP Session 0 interface cannot be taken down without breaking unrelated IP or DSS sessions - a devastating side effect which applications managing a simple IP session cannot be expected to be aware of. A typical DHCP client will assume that it should bring the interface down after releasing the IP lease. These problems can be avoided by tagging IP session 0 packets too, making this session similar to all other multiplexed sessions. This redefines the main netdev as an upper master interface only. Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: ptp: mark filter as __initdataMathias Krause
sk_unattached_filter_create() will copy the filter's instructions so we don't need to have the master copy hanging around after initialization. Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: fix test_bpf build to depend on NETRandy Dunlap
Fix build when CONFIG_NET is not enabled. Fixes these build errors: WARNING: "sk_unattached_filter_destroy" [lib/test_bpf.ko] undefined! WARNING: "kfree_skb" [lib/test_bpf.ko] undefined! WARNING: "sk_unattached_filter_create" [lib/test_bpf.ko] undefined! WARNING: "sk_run_filter_int_skb" [lib/test_bpf.ko] undefined! WARNING: "__alloc_skb" [lib/test_bpf.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: filter: Fix redefinition warnings on x86-64.David S. Miller
Do not collide with the x86-64 PTRACE user API namespace. net/core/filter.c:57:0: warning: "R8" redefined [enabled by default] arch/x86/include/uapi/asm/ptrace-abi.h:38:0: note: this is the location of the previous definition Fix by adding a BPF_ prefix to the register macros. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13bnx2x: fix build when BNX2X_SRIOV is not enabledRandy Dunlap
Fix build when BNX2X_SRIOV is not enabled. Change one parameter struct from bnx2 to bnx2x and don't return a value from a void function. drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h:576:48: warning: 'struct bnx2' declared inside parameter list [enabled by default] drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h:576:48: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h:576:60: warning: 'return' with a value, in function returning void [enabled by default] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13Merge branch 'cpsw'David S. Miller
Mugunthan V N says: ==================== Add DRA7xx and AM43xx platform support in cpsw-phy-sel driver Adding DRA7xx and AM43xx platform support to cpsw-phy-sel driver to select phy mode in control driver and fixing the uninitialized dev by initializing to platform device structure pointer. Changes from Initial version * Added back the missing patch (1/3) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13drivers: net: cpsw-phy-sel: add am43xx platform supportMugunthan V N
AM43xx phy mode selection is similar to AM33xx platform, so adding only the compatibility string to the driver Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13drivers: net: cpsw-phy-sel: add dra7xx support for phy selMugunthan V N
Add dra7xx support for selecting the phy mode which is present in control module of dra7xx SoC Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13drivers: net: cpsw-phy-sel: initialize priv->devMugunthan V N
priv->dev is uninitialized, initializing with pdev->dev Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12sch_hhf: fix comparison of qlen and limitYang Yingliang
When I use the following command, eth0 cannot send any packets. #tc qdisc add dev eth0 root handle 1: hhf limit 1 Because qlen need be smaller than limit, all packets were dropped. Fix this by qlen *<=* limit. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12vlan: rename __vlan_find_dev_deep() to __vlan_find_dev_deep_rcu()dingtianhong
The __vlan_find_dev_deep should always called in RCU, according David's suggestion, rename to __vlan_find_dev_deep_rcu looks more reasonable. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12net: rename local_df to ignore_dfWANG Cong
As suggested by several people, rename local_df to ignore_df, since it means "ignore df bit if it is set". Cc: Maciej Żenczykowski <maze@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12Merge branch 'cxgb4'David S. Miller
Hariprasad Shenai says: ==================== Misc. fixes for cxgb4 and cxgb4vf driver This series of patch provides fixes for cxgb4 and cxgb4vf driver related to rx checksum counter and decodes module type a bit more for ethtool output. The patches series is created against David Miller's 'net-next' tree. We would like to request this patch series to get merged via David Miller's 'net-next' tree. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12cxgb4vf: Check if rx checksum offload is enabled, while reading hardware ↵Hariprasad Shenai
calculated checksum Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12cxgb4: Check if rx checksum offload is enabled, while reading hardware ↵Hariprasad Shenai
calculated checksum Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12cxgb4: Decode the firmware port and module type a bit more for ethtoolHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12ipv6: remove parameter rt from fib6_prune_clones()Duan Jiong
the parameter rt will be assigned to c.arg in function fib6_clean_tree(), but function fib6_prune_clone() doesn't use c.arg, so we can remove it safely. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12Add support for netvsc build without CONFIG_SYSFS flagHaiyang Zhang
This change ensures the driver can be built successfully without the CONFIG_SYSFS flag. MS-TFS: 182270 Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12ptp: fix kconfig dependency warningsRandy Dunlap
Fix kconfig warnings: PTP_1588_CLOCK selects NET_PTP_CLASSIFY, which depends on NET, so PTP_1588_CLOCK should also depend on NET. PTP_1588_CLOCK_PCH selects PTP_1588_CLOCK so the former should depend on NET. warning: (IXP4XX_ETH && PTP_1588_CLOCK) selects NET_PTP_CLASSIFY which has unmet direct dependencies (NET) warning: (SFC && TILE_NET && BFIN_MAC_USE_HWSTAMP && TIGON3 && FEC && E1000E && IGB && IXGBE && I40E && MLX4_EN && SXGBE_ETH && STMMAC_ETH && TI_CPTS && PTP_1588_CLOCK_GIANFAR && PTP_1588_CLOCK_IXP46X && DP83640_PHY && PTP_1588_CLOCK_PCH) selects PTP_1588_CLOCK which has unmet direct dependencies (NET) [This warning is caused by the new 'depends on NET' in PTP_1588_CLOCK.] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12Merge branch 'filter-next'David S. Miller
Alexei Starovoitov says: ==================== BPF testsuite and cleanup This patchset adds BPF testsuite and improves readability of classic to internal BPF converter. The testsuite helped to find 'negative offset bug' in x64 JIT that was fixed by commit fdfaf64e ("x86: bpf_jit: support negative offsets") It can be very useful for classic and internal JIT compiler developers. Also it serves as performance benchmark. x86_64/i386 pass all tests with and without JIT. arm32 JIT is failing negative offset tests which are unsupported. Internal BPF tests are much larger than classic tests to cover different combinations of registers. Negative tests check correctness of classic BPF verifier which must reject them. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12net: filter: additional BPF testsAlexei Starovoitov
All tests should pass with and without JIT. Example output: test_bpf: #0 TAX 35 16 16 PASS test_bpf: #1 TXA 7 7 7 PASS test_bpf: #2 ADD_SUB_MUL_K 10 PASS test_bpf: #3 DIV_KX 33 PASS test_bpf: #4 AND_OR_LSH_K 10 10 PASS test_bpf: #5 LD_IND 8 8 8 PASS test_bpf: #6 LD_ABS 8 8 8 PASS test_bpf: #7 LD_ABS_LL 13 14 PASS test_bpf: #8 LD_IND_LL 12 12 12 PASS test_bpf: #9 LD_ABS_NET 10 12 PASS test_bpf: #10 LD_IND_NET 11 12 12 PASS ... Numbers are times in nsec per filter for given input data. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12net: filter: BPF testsuiteAlexei Starovoitov
The testsuite covers classic and internal BPF instructions. It is particularly useful for JIT compiler developers. Adds to "net" selftest target. The testsuite can be used as a set of micro-benchmarks. It measures execution time of each BPF program in nsec. This patch adds core framework. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12net: filter: make BPF conversion more readableAlexei Starovoitov
Introduce BPF helper macros to define instructions (similar to old BPF_STMT/BPF_JUMP macros) Use them while converting classic BPF to internal and in BPF testsuite later. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-05-08 This one is all from Johannes: "Here are a few small fixes for the current cycle: radiotap TX flags were wrong (fix by Bob), Chun-Yeow fixes an SMPS issue with mesh interfaces, Eliad fixes a locking bug and a cfg80211 state problem and finally Henning sent me a fix for IBSS rate information." Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09Merge branch 'sctp_sysctl'David S. Miller
Wang Weidong says: ==================== sctp: fix kfree static array pointer in sctp_sysctl_net_unregister patch #1 revert the efb842c45("sctp: optimize the sctp_sysctl_net_register") patch #2 add a checking for sctp_sysctl_net_register ==================== Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09sctp: add a checking for sctp_sysctl_net_registerwangweidong
When register_net_sysctl failed, we should free the sysctl_table. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09Revert "sctp: optimize the sctp_sysctl_net_register"wangweidong
This revert commit efb842c45("sctp: optimize the sctp_sysctl_net_register"), Since it doesn't kmemdup a sysctl_table for init_net, so the init_net->sctp.sysctl_header->ctl_table_arg points to sctp_net_table which is a static array pointer. So when doing sctp_sysctl_net_unregister, it will free sctp_net_table, then we will get a NULL pointer dereference like that: [ 262.948220] BUG: unable to handle kernel NULL pointer dereference at 000000000000006c [ 262.948232] IP: [<ffffffff81144b70>] kfree+0x80/0x420 [ 262.948260] PGD db80a067 PUD dae12067 PMD 0 [ 262.948268] Oops: 0000 [#1] SMP [ 262.948273] Modules linked in: sctp(-) crc32c_generic libcrc32c ... [ 262.948338] task: ffff8800db830190 ti: ffff8800dad00000 task.ti: ffff8800dad00000 [ 262.948344] RIP: 0010:[<ffffffff81144b70>] [<ffffffff81144b70>] kfree+0x80/0x420 [ 262.948353] RSP: 0018:ffff8800dad01d88 EFLAGS: 00010046 [ 262.948358] RAX: 0100000000000000 RBX: ffffffffa0227940 RCX: ffffea0000707888 [ 262.948363] RDX: ffffea0000707888 RSI: 0000000000000001 RDI: ffffffffa0227940 [ 262.948369] RBP: ffff8800dad01de8 R08: 0000000000000000 R09: ffff8800d9e983a9 [ 262.948374] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0227940 [ 262.948380] R13: ffffffff8187cfc0 R14: 0000000000000000 R15: ffffffff8187da10 [ 262.948386] FS: 00007fa2a2658700(0000) GS:ffff880112800000(0000) knlGS:0000000000000000 [ 262.948394] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 262.948400] CR2: 000000000000006c CR3: 00000000cddc0000 CR4: 00000000000006e0 [ 262.948410] Stack: [ 262.948413] ffff8800dad01da8 0000000000000286 0000000020227940 ffffffffa0227940 [ 262.948422] ffff8800dad01dd8 ffffffff811b7fa1 ffffffffa0227940 ffffffffa0227940 [ 262.948431] ffffffff8187d960 ffffffff8187cfc0 ffffffff8187d960 ffffffff8187da10 [ 262.948440] Call Trace: [ 262.948457] [<ffffffff811b7fa1>] ? unregister_sysctl_table+0x51/0xa0 [ 262.948476] [<ffffffffa020d1a1>] sctp_sysctl_net_unregister+0x21/0x30 [sctp] [ 262.948490] [<ffffffffa020ef6d>] sctp_net_exit+0x12d/0x150 [sctp] [ 262.948512] [<ffffffff81394f49>] ops_exit_list+0x39/0x60 [ 262.948522] [<ffffffff813951ed>] unregister_pernet_operations+0x3d/0x70 [ 262.948530] [<ffffffff81395292>] unregister_pernet_subsys+0x22/0x40 [ 262.948544] [<ffffffffa020efcc>] sctp_exit+0x3c/0x12d [sctp] [ 262.948562] [<ffffffff810c5e04>] SyS_delete_module+0x194/0x210 [ 262.948577] [<ffffffff81240fde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 262.948587] [<ffffffff815217a2>] system_call_fastpath+0x16/0x1b With this revert, it won't occur the Oops. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09mdio_bus: fix devm_mdiobus_alloc_size exportArnd Bergmann
commit 6d48f44b7b2 "mdio_bus: implement devm_mdiobus_alloc/devm_mdiobus_free" introduced a new function devm_mdiobus_alloc_size() but added an export for a different function devm_mdiobus_alloc(), which was obviously a simple mistake that leads to build error whenever this function is used from a loadable module: ERROR: "devm_mdiobus_alloc_size" [drivers/net/ethernet/ti/davinci_mdio.ko] undefined! Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09net: cassini: use nested lock annotationEmil Goode
In the cas_lock_tx function we acquire multiple locks in a loop and need to use nested lock annotation to prevent lockdep warnings. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Emil Goode <emilgoode@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09bonding: make a generic sysfs option store and fix commentsNikolay Aleksandrov
Introduce a generic option store function for sysfs and remove the specific ones. The attribute name is used to match against the option which is to be set. Also adjust the "name" of tlb_dynamic_lb option to match the sysfs entry and fix the comments and comment style in bond_sysfs.c The comments which showed obvious behaviour (i.e. behaviour that's seen in the option's entry) are removed, the ones that explained important points about the setting function have been moved above the respective set function in bond_options.c There's only 1 exception: num_unsol_na/num_grat_arp since it has 2 names CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09bnx2x: Fix UNDI driver unloadYuval Mintz
Commit 91ebb928b "bnx2x: Add support for Multi-Function UNDI" contains a bug which prevent the emptying of the device's Rx buffers before reset. As a result, on new boards it is likely HW will reach some fatal assertion once its interfaces load after UNDI was previously loaded. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09rds: remove the unneed NULL checkingwangweidong
unregister_net_sysctl_table will check the ctl_table_header, so remove the unneed checking Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09Merge branch 'mdio_net'David S. Miller
Johan Hovold says: ==================== net: cpsw and mdio-gpio fixes for v3.15-final These patches against v3.15-rc4 fix a few issues in the cpsw and mdio-gpio drivers. Resend with proper stable CC (git send-email still fails to parse the Sorry about the noise. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2025-05-21 19:15:26 +0000