summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-05-27ieee802154: fix typo for file nameVarka Bhadram
Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-27ieee802154: add set transmit power supportVarka Bhadram
This patch adds transmission power setting support for IEEE-802.15.4 devices via nl802154. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-26nl802154: fix cca mode wpan phy flagAlexander Aring
This patch fix the handling to call cca mode setting. If the phy isn't flag then the driver doesn't support this setting. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reported-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-26mac802154: mac802154_mlme_start_req() optimisation.Lennert Buytenhek
mac802154_mlme_start_req() calls ieee802154_mlme_ops(dev)->llsec->set_params() on the net_device passed into it, however, this net_device will always be a mac802154 net_device, so just call mac802154_set_params() directly instead. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-26ieee802154 socket: No need to check for ARPHRD_IEEE802154 in raw_bind().Lennert Buytenhek
ieee802154_get_dev() only returns devices that have dev->type == ARPHRD_IEEE802154, therefore, there is no need to check this again in raw_bind(). Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-26ieee802154: Remove 802.15.4/6LoWPAN checks for interface MTU.Lennert Buytenhek
In the past, 802.15.4 interfaces and 6LoWPAN interfaces used the same dev->type (ARPHRD_IEEE802154), and 802.15.4 interfaces were distinguished from 6LoWPAN interfaces by their differing dev->mtu. 6LoWPAN interfaces have their own ARPHRD type now, so there is no longer any need to check dev->mtu to distinguish 802.15.4 devices from 6LoWPAN devices. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-26ieee802154: Remove ieee802154_reduced_mlme_ops references.Lennert Buytenhek
As there doesn't seem to be a definition of it or any users of it. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-26Documentation/networking/ieee802154.txt: fix various inaccuracies.Lennert Buytenhek
* Update the linux-zigbee git:// repository URL. * Remove the MLME section as the current kernel does not provide a full 802.15.4 MLME implementation. * The hardmac example driver 'fakehard' was removed some time ago. * The IEEE 802.15.4 device drivers live in drivers/net/ieee802154/, not in drivers/ieee802154/. * The IEEE 802.15.4 MTU is 127 bytes, not 128 bytes. * Some of the 6LoWPAN code lives in net/6lowpan/. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-26ieee802154 socket: Return EMSGSIZE from raw_sendmsg() if packet too big.Lennert Buytenhek
The proper return code for trying to send a packet that exceeds the outgoing interface's MTU is EMSGSIZE, not EINVAL, so patch ieee802154's raw_sendmsg() to do the right thing. (Its dgram_sendmsg() was already returning EMSGSIZE for this case.) Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-26mac802154: Avoid rtnl deadlock in mac802154_wpan_ioctl().Lennert Buytenhek
->ndo_do_ioctl() can be entered with the rtnl lock already held, for example when sending a wext ioctl to a device (in which case the rtnl lock is taken by wext_ioctl_dispatch()), but mac802154_wpan_ioctl() currently unconditionally takes the rtnl lock on entry, which can cause deadlocks. To fix this, bail out of mac802154_wpan_ioctl() before taking the rtnl lock if the ioctl cmd is not one of the cmds we implement. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-26Bluetooth: mgmt: fix typosFlorian Grandel
A few comments had minor typos. These are being fixed. Signed-off-by: Florian Grandel <fgrandel@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-25Bluetooth: btusb: fix Realtek suspend/resumeDaniel Drake
Realtek btusb devices don't currently work after suspend/resume because the updated firmware is quietly lost - the USB hub doesn't notice any status change upon resume, but some kind of reset has definitely happened as the LMP subversion has reverted to its original value. Set the reset_resume flag to trigger probe and upload the new firmware again. Like the vendor code, I assume this is not needed when the device is selected as a wakeup source and hence will retain power during suspend. On the 2 products I have to hand, when trying this configuration the hardware seems unable to keep the device powered up during suspend. The USB hub then detects a status change on resume and does a reset, so we do not end up in broken state. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-25Bluetooth: hci_uart: Change 1 to true for bool type variables assignmentsShailendra Verma
The variables txcrc and hciextn are bool type. So assigning true instead of 1. Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-25Bluetooth: btusb: Change 1 to true in bool type variable assignmentShailendra Verma
The reset is a bool type variable. So assigning true to reset instead of 1. Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-25Bluetooth: btusb: Support QCA61x4 ROME v2.0Chan-yeol Park
The previous commit(3267c88) missed QCA61x4 ROME v2.0 info on Samsung so its BT is not activated and the below message is shown. [ 8.009638] usb 1-1: New USB device found, idVendor=0cf3, idProduct=e300 [ 8.012637] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 8.102901] Bluetooth: hci0: don't support firmware rome 0x200 This patch adds QCA61x4 ROME v2.0 info in qca_devices_table[], and is verified on Samsung with the firmware provided by Kim, Ben Young Tae <ytkim@qca.qualcomm.com>. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e300 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Chan-yeol Park <chanyeol.park@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-23mac802154: remove mib lockAlexander Aring
This patch removes the mib lock. The new locking mechanism is to protect the mib values with the rtnl lock. Note that this isn't always necessary if we have an interface up the most mib values are readonly (e.g. address settings). With this behaviour we can remove locking in hotpath like frame parsing completely. It depends on context if we need to hold the rtnl lock or not, this makes the callbacks of ieee802154_mlme_ops unnecessary because these callbacks hols always the locks. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-23mac802154: use atomic ops for sequence incrementationAlexander Aring
This patch will use atomic operations for sequence number incrementation while MAC header generation. Upper layers like af_802154 or 6LoWPAN could call this function in a parallel context while generating 802.15.4 MAC header before queuing into wpan interfaces transmit queue. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-23mac802154: remove pib lockAlexander Aring
This patch removes the pib lock which is now replaced by rtnl lock. The new interface already use the rtnl lock only. Nevertheless this patch will fix issues while using new and old interface at the same time. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-23mac802154: fix hold rtnl while ioctlAlexander Aring
This patch fixes an issue to set address configuration with ioctl. Accessing the mib requires rtnl lock and the ndo_do_ioctl doesn't hold the rtnl lock while this callback is called. This patch do that manually. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reported-by: Matteo Petracca <matteo.petracca@sssup.it> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-21ieee802154/atusb: Set default ed level to 0xbe like the rest of these driversStefan Schmidt
Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-21ieee802154/atusb: Mark driver as AACK enabled in hardware.Stefan Schmidt
Since firmware version 0.2 we use AACK handling directly in the firmware. Inform the stack that the hardware supports and uses it. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-21ieee802154/atusb: Warn about outdated device firmware.Stefan Schmidt
Together with mainlining the driver we released a first public binary version of the device firmware. This is version 0.2. With this change we warn users who run outdated versions of the firmware. While we have not seen problems with it yet (thus no error, but a warning only) it would be better to run the released and tested firmware. You can find released versions here: http://downloads.qi-hardware.com/people/werner/wpan/web/ Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-20at86rf230: add missing cca ed level valuesAlexander Aring
This patch add missing values for at86rf212 ed level values. Currently there are 15 values and the register setting supports 16 different ed level values. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reported-by: Craig Younkins <craig@freshtemp.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19Bluetooth: Add debug logs for legacy SMP crypto functionsJohan Hedberg
To help debug legacy SMP crypto functions add debug logs of the various values involved. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19mac802154: select CRYPTO when neededArnd Bergmann
The mac802154 subsystem uses functions from the crypto layer and correctly selects the individual crypto algorithms, but fails to build when the crypto layer is disabled altogether: crypto/built-in.o: In function `crypto_ctr_free': :(.text+0x80): undefined reference to `crypto_drop_spawn' crypto/built-in.o: In function `crypto_rfc3686_free': :(.text+0xac): undefined reference to `crypto_drop_spawn' crypto/built-in.o: In function `crypto_ctr_crypt': :(.text+0x2f0): undefined reference to `blkcipher_walk_virt_block' :(.text+0x2f8): undefined reference to `crypto_inc' To solve that, this patch also selects the core crypto code, like all other users of that code do. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: cleanup codeAlexander Aring
This patch just cleanups the code at several places. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: add support for async xmit handlingAlexander Aring
This patch will add async xmit support for the fakelb driver. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: remove fakelb_hw_deliverAlexander Aring
This patch cleanups the fakelb_hw_deliver function by removing them. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: add virtual phy reset defaultsAlexander Aring
This patch adds reset defaults for the fakelb phy. I used the channel 13 and page 0 which is the same default like at86rf233. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: use own channel and page attributesAlexander Aring
This patch adds an own phy attribute for page and channel into fakelb_phy. The current way is to use the internal mac802154 stored phy pib values which can occur in locking issues while using it inside the driver layer. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: introduce fakelb ifup phys listAlexander Aring
This patch introduce a fakelb ifup phys list, which stores all registered phys which are in an operated mode. This will reduce the iterations of non-operated phys while transmit frames. There exists two locks now, one rwlock for the operated interfaces and the spinlock for protecting the list for all registered virtual phys. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: move lock out of iterationAlexander Aring
The list need to be protected while iteration which is need when other list iterates at the same time over this list. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: declare fakelb list staticAlexander Aring
This patch moves the fakelb list of all registered phy's in a static declaration in the fakelb driver. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: declare rwlock staticAlexander Aring
This patch moves the rwlock declarition into a static variable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: don't deliver when one phyAlexander Aring
A real phy don't transmit the transmitted frame back to the phy. This behaviour will confuse the 6LoWPAN and the upper IPv6 neighbour discovery cache. We need now at least two virtual phy's to creating a virtual wpan network. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: rename fakelb_dev_priv to fakelb_phyAlexander Aring
This patch renames fakelb_dev_priv to fakelb_phy. We don't faking devices here, we fake wpan phys. This avoids also confusing with the variable priv, which is used several times in this driver to represent this structure. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: use list_for_each_entry_safeAlexander Aring
Iterate and removing items from a list, we should use list_for_each_entry_safe instead list_for_each_entry to avoid accidents by removing. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: creating two virtual phys per defaultAlexander Aring
This patch change the default virtual wpan phys of fakelb driver from one to two. To have one virtual phy makes no sense, because it need at least two virtual phy's to speak to each other. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19ieee802154: add support for atusb transceiverAlexander Aring
This patch adds support for the atusb transceiver. The current driver supports basic functionality only. Possible further tasks would be to sync functionality with the at86rf230 driver, because the atusb use internally an at86rf231 transceiver. Some of these features need a firmware update like AACK and ARET handling. I did small changes to this driver to work with xmit_async callback and setting of a random extended perm address. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Werner Almesberger <werner@almesberger.net> Cc: Stefan Schmidt <s.schmidt@samsung.com> Cc: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19mac802154: tx: allow xmit complete from hard irqAlexander Aring
Replace consume_skb with dev_consume_skb_any in ieee802154_xmit_complete which can be called in hard irq and other contexts. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19at86rf230: fix callback for aret handlingAlexander Aring
This patch fix the complete callback for going into aret on. Currently we starting after a state change into aret on again a state change into aret on which is not necessary. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19mac802154: fakelb: Fix potential NULL pointer dereference.Martin Townsend
fakelb_hw_deliver creates a copy of the skb's header which can potentially return NULL so we now check for this before actually delivering to the 802.15.4 MAC layer. Signed-off-by: Martin Townsend <martin.townsend@xsilon.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19nl802154: add support for dump phy capabilitiesAlexander Aring
This patch add support to nl802154 to dump all phy capabilities which is inside the wpan_phy_supported struct. Also we introduce a new method to dumping supported channels. The new method will offer a easier interface and has lesser netlink traffic. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19at86rf230: add reset states of tx power levelAlexander Aring
This patch adds the reset states for tx power levels after running reset procedure. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19at86rf230: add cca ed level reset valueAlexander Aring
This patch adds reset values for cca ed level values after running reset procedure. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19at86rf230: rework tx cca energy detection levelAlexander Aring
This patch reworks the cca energy detection level handling. This contains a calculation which works on all transceiver types and add support for dump cca energy detection levels. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19at86rf230: rework tx power supportAlexander Aring
This patch adds support for get transmit power levels and reworks the set of transmit power levels which was broken before. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19at86rf230: set cca_modes supported flagsAlexander Aring
This patch sets the at86rf230 supported cca modes. In case of at86rf212 it also can support listen before transmit. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19ieee802154: add iftypes capabilityAlexander Aring
This patch adds capability flags for supported interface types. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19cfg802154: introduce wpan phy flagsAlexander Aring
This patch introduce a flag property for the wpan phy structure. The current flag settings in ieee802154_hw are accessable in mac802154 layer only which is okay for flags which indicates MAC handling which are done by phy. For real PHY layer settings like cca mode, transmit power, cca energy detection level. The difference between these flags are that the MAC handling flags are only handled in mac802154/HardMac layer e.g. on an interface up. The phy settings are direct netlink calls from nl802154 into the driver layer and the nl802154 need to have a chance to check if the driver supports this handling before sending to the next layer. We also check now on PHY flags while dumping and setting pib attributes. In comparing with MIB attributes the 802.15.4 gives us an default value which we assume when a transceiver implement less functionality. In case of MIB settings the nl802154 layer doesn't need to check on the ieee802154_hw flags then. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-06-10 10:16:01 +0000